linux-kernel - [PATCH 36/40] pm2301-charger: Wake device on register access

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Fri, 15 Feb 2013 12:45:06 +0000
From:	Lee Jones <lee.jones@...aro.org>
To:	linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Cc:	arnd@...db.de, linus.walleij@...ricsson.com,
	cbouatmailru@...il.com, sameo@...ux.intel.com,
	Rupesh Kumar <rupesh.kumar@...ricsson.com>,
	Lee Jones <lee.jones@...aro.org>
Subject: [PATCH 36/40] pm2301-charger: Wake device on register access

From: Rupesh Kumar <rupesh.kumar@...ricsson.com>

When USB  Dedicated or Standard host chargers are plugged into
the device, chargealg attempts to disable the PM2301 AC charger,
However, disabling PM2301 was failing because of it being in
runtime suepend mode & LPN pin being low.

Signed-off-by: Rupesh Kumar <rupesh.kumar@...ricsson.com>
Signed-off-by: Lee Jones <lee.jones@...aro.org>
Reviewed-by: Marcus COOPER <marcus.xm.cooper@...ricsson.com>
Reviewed-by: Philippe LANGLAIS <philippe.langlais@...ricsson.com>
---
 drivers/power/pm2301_charger.c |   22 ++++++----------------
 1 file changed, 6 insertions(+), 16 deletions(-)

diff --git a/drivers/power/pm2301_charger.c b/drivers/power/pm2301_charger.c
index f99a0c8..ea9870d 100644
--- a/drivers/power/pm2301_charger.c
+++ b/drivers/power/pm2301_charger.c
@@ -128,13 +128,9 @@ static void clear_lpn_pin(struct pm2xxx_charger *pm2)
 static int pm2xxx_reg_read(struct pm2xxx_charger *pm2, int reg, u8 *val)
 {
 	int ret;
-	/*
-	 * When AC adaptor is unplugged, the host
-	 * must put LPN high to be able to
-	 * communicate by I2C with PM2301
-	 * and receive I2C "acknowledge" from PM2301.
-	 */
-	mutex_lock(&pm2->lock);
+
+	/* wake up the device */
+	pm_runtime_get_sync(pm2->dev);
 
 	ret = i2c_smbus_read_i2c_block_data(pm2->config.pm2xxx_i2c, reg,
 				1, val);
@@ -142,7 +138,6 @@ static int pm2xxx_reg_read(struct pm2xxx_charger *pm2, int reg, u8 *val)
 		dev_err(pm2->dev, "Error reading register at 0x%x\n", reg);
 	else
 		ret = 0;
-	mutex_unlock(&pm2->lock);
 
 	return ret;
 }
@@ -150,13 +145,9 @@ static int pm2xxx_reg_read(struct pm2xxx_charger *pm2, int reg, u8 *val)
 static int pm2xxx_reg_write(struct pm2xxx_charger *pm2, int reg, u8 val)
 {
 	int ret;
-	/*
-	 * When AC adaptor is unplugged, the host
-	 * must put LPN high to be able to
-	 * communicate by I2C with PM2301
-	 * and receive I2C "acknowledge" from PM2301.
-	 */
-	mutex_lock(&pm2->lock);
+
+	/* wake up the device */
+	pm_runtime_get_sync(pm2->dev);
 
 	ret = i2c_smbus_write_i2c_block_data(pm2->config.pm2xxx_i2c, reg,
 				1, &val);
@@ -164,7 +155,6 @@ static int pm2xxx_reg_write(struct pm2xxx_charger *pm2, int reg, u8 val)
 		dev_err(pm2->dev, "Error writing register at 0x%x\n", reg);
 	else
 		ret = 0;
-	mutex_unlock(&pm2->lock);
 
 	return ret;
 }
-- 
1.7.10.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/