[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1360896534-20637-1-git-send-email-linux@prisktech.co.nz>
Date: Fri, 15 Feb 2013 15:48:53 +1300
From: Tony Prisk <linux@...sktech.co.nz>
To: linux-arm-kernel@...ts.infradead.org
Cc: linux-kernel@...r.kernel.org, grant.likely@...retlab.ca,
linus.walleij@...aro.org, Tony Prisk <linux@...sktech.co.nz>
Subject: [RFC PATCH] Add pin control driver for Wondermedia SoCS
Before I get all carried away and start filling in all the data for
this driver, I was hoping someone (or a few people) could review the
basic design in case it requires changes to the data structures.
This driver is based on pinctrl-bcm2835.c as it seems to be similar in
design. The pin controller on Wondermedia SoC's only allows each pin to
either be a GPIO or to be its 'alternate' function. Functions cannot be
remapped to any other pin.
I have seperated out the data from the code as there are several SoC's
to support and each has it's own variation of registers / pin layout.
I borrowed this part of the design from the Tegra pinctrl driver.
Regards
Tony Prisk
Tony Prisk (1):
pinctrl: gpio: vt8500: Add pin control driver for Wondermedia SoCs
arch/arm/Kconfig | 4 +-
arch/arm/boot/dts/wm8850-w70v2.dts | 15 +
arch/arm/boot/dts/wm8850.dtsi | 7 +-
arch/arm/mach-vt8500/Kconfig | 1 +
drivers/pinctrl/Kconfig | 10 +
drivers/pinctrl/Makefile | 2 +
drivers/pinctrl/pinctrl-wm8850.c | 166 +++++++++++
drivers/pinctrl/pinctrl-wmt.c | 565 ++++++++++++++++++++++++++++++++++++
drivers/pinctrl/pinctrl-wmt.h | 73 +++++
9 files changed, 840 insertions(+), 3 deletions(-)
create mode 100644 drivers/pinctrl/pinctrl-wm8850.c
create mode 100644 drivers/pinctrl/pinctrl-wmt.c
create mode 100644 drivers/pinctrl/pinctrl-wmt.h
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists