[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1360943547-2186-1-git-send-email-andreas@gaisler.com>
Date: Fri, 15 Feb 2013 16:52:20 +0100
From: Andreas Larsson <andreas@...sler.com>
To: Grant Likely <grant.likely@...retlab.ca>
Cc: Mark Brown <broonie@...nsource.wolfsonmicro.com>,
spi-devel-general@...ts.sourceforge.net,
Mingkai Hu <Mingkai.hu@...escale.com>,
Anton Vorontsov <anton.vorontsov@...aro.org>,
Joakim Tjernlund <Joakim.Tjernlund@...nsmode.se>,
Kumar Gala <galak@...nel.crashing.org>,
Peter Korsgaard <jacmet@...site.dk>,
linux-kernel@...r.kernel.org, software@...sler.com
Subject: [PATCH v3 0/7] spi: spi-fsl-spi: Make spi-fsl-spi usable in cpu mode outside of FSL SOC environments and add a grlib variant normally running on sparc
Changes since v3:
- Patches 1-7: Added Acked-by: Anton Vorontsov <anton@...msg.org>
- Patch 1: Small style tweak lining up function arguments properly
- Patch 7: Changed a style issue with two variables declared on same line
- Patch 7: Removed usage of cs_gpio_flags variable to apply cleanly to spi/next
- Patch 7: Changed get_named_gpio "hole value" to -ENOENT => Requries
the "spi: Initialize cs_gpio and cs_gpios with ENOENT" patch for
TYPE_GRLIB support
Patch 1-6 are ready to be applied
Patch 7 waits for depencency as described above
This makes the cpu mode of the driver available outside of an FSL SOC
and even powerpc environment. Furthermore, this adds support for the
mostly register-compatible SPICTRL core from the GRLIB VHDL IP core
library normally running on SPARC.
This effort is split up in several patches for clarity of what is being
changed. Patches 3-5 prepares for the introduction of the GRLIB SPICTRL
functionality in patch 6.
To use what is introduced right away they could eventually be merged:
Patch A: patch 1
Patch B: patch 2
Patch C: patches 3-6 merged
Patch D: patch 7
Patch 1 makes the driver compileable and presumably useable outside of
FSL SOC and powerpc environments (SPARC in particular)
Patch 2 fixes a bug that can happen when a device uses SPI_CS_HIGH
Patches 3-6 makes the driver working for GRLIB SPICTRL cores that has
the built in slave select register and that uses that exclusively for
chipselects.
Patch 7 introduces gpio support for GRLIB SPICTRL cores. For TYPE_GRLIB
support to work properly, patch 7 (and patch 7 only) relies upon the
"spi: Initialize cs_gpio and cs_gpios with -ENOENT" patch. This issue
does not affect TYPE_FSL at all.
The GRLIB type has been tested under sparc. The FSL type has been
compile tested in powerpc, arm and x86 environments. It would be great
if someone with an FSL board could test this out.
One could argue that it would be better to add the GRLIB variant as a
mode flag in of_mpc8xxx_spi_probe instead of using a new type field, but
that would require to add a flag for this core in
include/linux/fsl_devices.h which does not feel right given that this
core is not part of an FSL device.
Signed-off-by: Andreas Larsson <andreas@...sler.com>
Andreas Larsson (7):
spi: spi-fsl-spi: Make driver usable in CPU mode outside of an
FSL_SOC environment
spi: spi-fsl-spi: Make sure in spi_fsl_setup that chipselect becomes
inactive
spi: spi-fsl-spi: Move setting non-zero tx and rx shifts to a
function accessed by a function pointer
spi: spi-fsl-spi: Introduce a type for the driver
spi: spi-fsl-spi: Add support for setting a maximum number of bits
per word
spi: spi-fsl-spi: Add support for Aeroflex Gaisler GRLIB cores
normally running on SPARC
spi: spi-fsl-spi: Add support for gpio chipselects for GRLIB type
cores
Documentation/devicetree/bindings/spi/fsl-spi.txt | 3 +-
.../devicetree/bindings/vendor-prefixes.txt | 1 +
drivers/spi/Kconfig | 11 +-
drivers/spi/Makefile | 1 +
drivers/spi/spi-fsl-cpm.c | 387 +++++++++++++
drivers/spi/spi-fsl-cpm.h | 43 ++
drivers/spi/spi-fsl-lib.c | 8 +
drivers/spi/spi-fsl-lib.h | 15 +-
drivers/spi/spi-fsl-spi.c | 605 ++++++--------------
drivers/spi/spi-fsl-spi.h | 72 +++
10 files changed, 722 insertions(+), 424 deletions(-)
create mode 100644 drivers/spi/spi-fsl-cpm.c
create mode 100644 drivers/spi/spi-fsl-cpm.h
create mode 100644 drivers/spi/spi-fsl-spi.h
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists