| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20130216064222.GA2116@roll>
Date: Sat, 16 Feb 2013 01:42:22 -0500
From: tmhikaru@...il.com
To: Ben Hutchings <ben@...adent.org.uk>, linux-kernel@...r.kernel.org
Subject: Re: 3.2.38 most of the time has 100% cpu use reported
On Sat, Feb 16, 2013 at 05:18:10AM +0000, Ben Hutchings wrote:
> Don't worry about it - I think the log messages are a pretty good clue.
>
> Does this patch fix the log messages and/or the other issues?
>
Yes! In fact after a quick reboot, the log lines look to me like they exist
properly, acpi looks like it's working properly, and most importantly my cpu
usage is normal.
One thing though:
> If not, can you report back the 'SMBIOS entry:' and 'DMI entry:' log
> lines this produces.
I don't see an SMBIOS entry line in the dmesg log output, though there IS a
DMI entry. I take it that I should have seen an SMBIOS entry of some
kind... I've included the entire output of dmesg just in case you would
find it useful below. For all I know I missed something.
Tim McGrath
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.38 (root@...l) (gcc version 4.7.1 (GCC) ) #3 Sat Feb 16 01:12:31 EST 2013
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e8000 - 00000000000ea000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000005fff0000 (usable)
[ 0.000000] BIOS-e820: 000000005fff0000 - 000000005fff8000 (ACPI data)
[ 0.000000] BIOS-e820: 000000005fff8000 - 0000000060000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffee0000 - 00000000fff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] DMI entry: 5f 44 4d 49 5f 73 51 03 50 06 0f 00 19 00 23
[ 0.000000] Legacy DMI 2.3 present.
[ 0.000000] DMI: ECS M848A/M848A, BIOS 07.00T 04/02/01
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x5fff0 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FC0000000 write-back
[ 0.000000] 1 base 040000000 mask FE0000000 write-back
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 base 0D0000000 mask FF8000000 write-combining
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 01c00000
[ 0.000000] Base memory trampoline at [c009c000] 9c000 size 12288
[ 0.000000] init_memory_mapping: 0000000000000000-0000000037bfe000
[ 0.000000] 0000000000 - 0000200000 page 4k
[ 0.000000] 0000200000 - 0037a00000 page 2M
[ 0.000000] 0037a00000 - 0037bfe000 page 4k
[ 0.000000] kernel direct mapping tables up to 37bfe000 @ 1bfa000-1c00000
[ 0.000000] RAMDISK: 5fc59000 - 5fff0000
[ 0.000000] Allocated new RAMDISK: 37867000 - 37bfd6a3
[ 0.000000] Move RAMDISK from 000000005fc59000 - 000000005ffef6a2 to 37867000 - 37bfd6a2
[ 0.000000] ACPI: RSDP 000fa260 00014 (v00 AMI )
[ 0.000000] ACPI: RSDT 5fff0000 0002C (v01 AMIINT SiS740XX 00001000 MSFT 0100000B)
[ 0.000000] ACPI: FACP 5fff0030 00081 (v01 AMIINT SiS740XX 00000011 MSFT 0100000B)
[ 0.000000] ACPI: DSDT 5fff0110 034D2 (v01 SiS 740 00000100 MSFT 0100000D)
[ 0.000000] ACPI: FACS 5fff8000 00040
[ 0.000000] ACPI: APIC 5fff00c0 00050 (v01 AMIINT SiS740XX 00001000 MSFT 0100000B)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 643MB HIGHMEM available.
[ 0.000000] 891MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 37bfe000
[ 0.000000] low ram: 0 - 37bfe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x00037bfe
[ 0.000000] HighMem 0x00037bfe -> 0x0005fff0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0005fff0
[ 0.000000] On node 0 totalpages: 393087
[ 0.000000] free_area_init_node: node 0, pgdat c14e7a08, node_mem_map f6c66200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1752 pages used for memmap
[ 0.000000] Normal zone: 222502 pages, LIFO batch:31
[ 0.000000] HighMem zone: 1288 pages used for memmap
[ 0.000000] HighMem zone: 163562 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e8000
[ 0.000000] PM: Registered nosave memory: 00000000000e8000 - 00000000000ea000
[ 0.000000] PM: Registered nosave memory: 00000000000ea000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 60000000 (gap: 60000000:9ec00000)
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 390015
[ 0.000000] Kernel command line: BOOT_IMAGE=LinuxOld ro root=801 vt.default_utf8=0
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 6290944 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (00037bfe:0005fff0)
[ 0.000000] Memory: 1543180k/1572800k available (3374k kernel code, 29168k reserved, 1672k data, 472k init, 659400k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfffa3000 - 0xfffff000 ( 368 kB)
[ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
[ 0.000000] vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
[ 0.000000] .init : 0xc14ee000 - 0xc1564000 ( 472 kB)
[ 0.000000] .data : 0xc134b83d - 0xc14edac0 (1672 kB)
[ 0.000000] .text : 0xc1000000 - 0xc134b83d (3374 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:2304 nr_irqs:256 16
[ 0.000000] CPU 0 irqstacks, hard=f6008000 soft=f600a000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2083.129 MHz processor.
[ 0.001002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4166.25 BogoMIPS (lpj=2083129)
[ 0.002003] pid_max: default: 32768 minimum: 301
[ 0.002116] Security Framework initialized
[ 0.002226] Mount-cache hash table entries: 512
[ 0.002519] Initializing cgroup subsys cpuacct
[ 0.002596] Initializing cgroup subsys memory
[ 0.002682] Initializing cgroup subsys devices
[ 0.002756] Initializing cgroup subsys freezer
[ 0.002829] Initializing cgroup subsys net_cls
[ 0.002902] Initializing cgroup subsys blkio
[ 0.003013] Initializing cgroup subsys perf_event
[ 0.003124] CPU: CLK_CTL MSR was 6003d22f. Reprogramming to 2003d22f
[ 0.003216] CPU: AMD Athlon(tm) XP 2800+ stepping 00
[ 0.003368] ACPI: Core revision 20110623
[ 0.006412] ftrace: allocating 19401 entries in 38 pages
[ 0.008129] Performance Events: AMD PMU driver.
[ 0.008250] ... version: 0
[ 0.008320] ... bit width: 48
[ 0.008390] ... generic registers: 4
[ 0.008459] ... value mask: 0000ffffffffffff
[ 0.008531] ... max period: 00007fffffffffff
[ 0.009003] ... fixed-purpose events: 0
[ 0.009072] ... event mask: 000000000000000f
[ 0.009468] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.009843] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.019998] devtmpfs: initialized
[ 0.019998] PM: Registering ACPI NVS region at 5fff8000 (32768 bytes)
[ 0.019998] xor: automatically using best checksumming function: pIII_sse
[ 0.024002] pIII_sse : 2264.000 MB/sec
[ 0.024072] xor: using function: pIII_sse (2264.000 MB/sec)
[ 0.024153] atomic64 test passed for i586+ platform with CX8 and with SSE
[ 0.024510] print_constraints: dummy:
[ 0.024691] NET: Registered protocol family 16
[ 0.025197] ACPI: bus type pci registered
[ 0.026630] PCI: PCI BIOS revision 2.10 entry at 0xfdb01, last bus=2
[ 0.026705] PCI: Using configuration type 1 for base access
[ 0.035580] bio: create slab <bio-0> at 0
[ 0.052136] raid6: int32x1 441 MB/s
[ 0.069083] raid6: int32x2 507 MB/s
[ 0.086068] raid6: int32x4 570 MB/s
[ 0.103008] raid6: int32x8 339 MB/s
[ 0.119993] raid6: mmxx1 1457 MB/s
[ 0.136989] raid6: mmxx2 2648 MB/s
[ 0.154009] raid6: sse1x1 1562 MB/s
[ 0.170993] raid6: sse1x2 2570 MB/s
[ 0.171062] raid6: using algorithm sse1x2 (2570 MB/s)
[ 0.171203] ACPI: Added _OSI(Module Device)
[ 0.171275] ACPI: Added _OSI(Processor Device)
[ 0.171346] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.171417] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.171998] ACPI: EC: Look up EC in DSDT
[ 0.175424] ACPI: Interpreter enabled
[ 0.175500] ACPI: (supports S0 S1 S4 S5)
[ 0.175702] ACPI: Using IOAPIC for interrupt routing
[ 0.177305] ACPI: Power Resource [FDDP] (off)
[ 0.177745] ACPI: Power Resource [URP1] (off)
[ 0.178267] ACPI: Power Resource [URP2] (off)
[ 0.178933] ACPI: Power Resource [LPTP] (off)
[ 0.182363] ACPI: No dock devices found.
[ 0.182435] HEST: Table not found.
[ 0.182507] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.182958] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.183177] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.183182] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.183187] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.183191] pci_root PNP0A03:00: host bridge window [mem 0x000cb000-0x000dffff] (ignored)
[ 0.183195] pci_root PNP0A03:00: host bridge window [mem 0x60000000-0xffdfffff] (ignored)
[ 0.183199] pci_root PNP0A03:00: host bridge window [mem 0xfee01000-0xffdfffff] (ignored)
[ 0.183222] pci 0000:00:00.0: [1039:0746] type 0 class 0x000600
[ 0.183236] pci 0000:00:00.0: reg 10: [mem 0xd0000000-0xd7ffffff]
[ 0.183312] pci 0000:00:01.0: [1039:0002] type 1 class 0x000604
[ 0.183359] pci 0000:00:02.0: [1039:0008] type 0 class 0x000601
[ 0.183427] pci 0000:00:02.0: Enabling SiS 96x SMBus
[ 0.183520] pci 0000:00:02.1: [1039:0016] type 0 class 0x000c05
[ 0.183566] pci 0000:00:02.1: reg 20: [io 0x0c00-0x0c1f]
[ 0.183609] pci 0000:00:02.5: [1039:5513] type 0 class 0x000101
[ 0.183659] pci 0000:00:02.5: reg 20: [io 0xff00-0xff0f]
[ 0.183701] pci 0000:00:03.0: [1039:7001] type 0 class 0x000c03
[ 0.183716] pci 0000:00:03.0: reg 10: [mem 0xcfffd000-0xcfffdfff]
[ 0.183783] pci 0000:00:03.1: [1039:7001] type 0 class 0x000c03
[ 0.183797] pci 0000:00:03.1: reg 10: [mem 0xcfffe000-0xcfffefff]
[ 0.183870] pci 0000:00:03.2: [1039:7002] type 0 class 0x000c03
[ 0.183888] pci 0000:00:03.2: reg 10: [mem 0xcffdf000-0xcffdffff]
[ 0.184020] pci 0000:00:03.2: PME# supported from D0 D3hot D3cold
[ 0.184026] pci 0000:00:03.2: PME# disabled
[ 0.184054] pci 0000:00:04.0: [1039:0900] type 0 class 0x000200
[ 0.184072] pci 0000:00:04.0: reg 10: [io 0xc800-0xc8ff]
[ 0.184084] pci 0000:00:04.0: reg 14: [mem 0xcfffc000-0xcfffcfff]
[ 0.184127] pci 0000:00:04.0: reg 30: [mem 0xcffa0000-0xcffbffff pref]
[ 0.184155] pci 0000:00:04.0: supports D1 D2
[ 0.184159] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.184164] pci 0000:00:04.0: PME# disabled
[ 0.184191] pci 0000:00:0a.0: [1113:1211] type 0 class 0x000200
[ 0.184209] pci 0000:00:0a.0: reg 10: [io 0xc400-0xc4ff]
[ 0.184221] pci 0000:00:0a.0: reg 14: [mem 0xcffffd00-0xcffffdff]
[ 0.184263] pci 0000:00:0a.0: reg 30: [mem 0xcffe0000-0xcffeffff pref]
[ 0.184292] pci 0000:00:0a.0: supports D1 D2
[ 0.184295] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.184301] pci 0000:00:0a.0: PME# disabled
[ 0.184321] pci 0000:00:0b.0: [1095:3512] type 0 class 0x000106
[ 0.184339] pci 0000:00:0b.0: reg 10: [io 0xdc00-0xdc07]
[ 0.184350] pci 0000:00:0b.0: reg 14: [io 0xd800-0xd803]
[ 0.184361] pci 0000:00:0b.0: reg 18: [io 0xd400-0xd407]
[ 0.184372] pci 0000:00:0b.0: reg 1c: [io 0xd000-0xd003]
[ 0.184383] pci 0000:00:0b.0: reg 20: [io 0xcc00-0xcc0f]
[ 0.184394] pci 0000:00:0b.0: reg 24: [mem 0xcffffe00-0xcfffffff]
[ 0.184405] pci 0000:00:0b.0: reg 30: [mem 0xcff00000-0xcff7ffff pref]
[ 0.184433] pci 0000:00:0b.0: supports D1 D2
[ 0.184454] pci 0000:00:0c.0: [1274:5880] type 0 class 0x000401
[ 0.184472] pci 0000:00:0c.0: reg 10: [io 0xc000-0xc03f]
[ 0.184547] pci 0000:00:0c.0: supports D2
[ 0.184608] pci 0000:01:00.0: [1002:7142] type 0 class 0x000300
[ 0.184637] pci 0000:01:00.0: reg 10: [mem 0xb0000000-0xbfffffff 64bit pref]
[ 0.184652] pci 0000:01:00.0: reg 18: [mem 0xcfdf0000-0xcfdfffff 64bit]
[ 0.184663] pci 0000:01:00.0: reg 20: [io 0x8800-0x88ff]
[ 0.184682] pci 0000:01:00.0: reg 30: [mem 0xcfdc0000-0xcfddffff pref]
[ 0.184732] pci 0000:01:00.0: supports D1 D2
[ 0.184759] pci 0000:01:00.1: [1002:7162] type 0 class 0x000380
[ 0.184781] pci 0000:01:00.1: reg 10: [mem 0xcfde0000-0xcfdeffff 64bit]
[ 0.184845] pci 0000:01:00.1: supports D1 D2
[ 0.184888] pci 0000:00:01.0: PCI bridge to [bus 01-02]
[ 0.184964] pci 0000:00:01.0: bridge window [io 0x8000-0x8fff]
[ 0.184970] pci 0000:00:01.0: bridge window [mem 0xcfc00000-0xcfdfffff]
[ 0.184976] pci 0000:00:01.0: bridge window [mem 0xaf900000-0xcfafffff pref]
[ 0.184990] pci_bus 0000:00: on NUMA node 0
[ 0.184995] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.185175] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
[ 0.187666] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 12 14 15)
[ 0.188111] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 10 11 12 14 15)
[ 0.188560] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 *11 12 14 15)
[ 0.189029] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 10 11 12 14 15)
[ 0.189476] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 7 10 11 12 14 15)
[ 0.189922] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 7 10 11 12 14 15)
[ 0.190368] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.190917] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 *10 11 12 14 15)
[ 0.191575] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.191687] vgaarb: loaded
[ 0.191755] vgaarb: bridge control possible 0000:01:00.0
[ 0.192086] SCSI subsystem initialized
[ 0.192318] libata version 3.00 loaded.
[ 0.192449] usbcore: registered new interface driver usbfs
[ 0.192583] usbcore: registered new interface driver hub
[ 0.192714] usbcore: registered new device driver usb
[ 0.193103] PCI: Using ACPI for IRQ routing
[ 0.193205] PCI: pci_cache_line_size set to 32 bytes
[ 0.193266] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.193271] reserve RAM buffer: 000000005fff0000 - 000000005fffffff
[ 0.195832] pnp: PnP ACPI init
[ 0.195938] ACPI: bus type pnp registered
[ 0.196163] pnp 00:00: [bus 00-ff]
[ 0.196168] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.196172] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.196175] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.196179] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.196182] pnp 00:00: [mem 0x000cb000-0x000dffff window]
[ 0.196186] pnp 00:00: [mem 0x60000000-0xffdfffff window]
[ 0.196189] pnp 00:00: [mem 0xfee01000-0xffdfffff window]
[ 0.196322] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.196430] pnp 00:01: [io 0x0010-0x001f]
[ 0.196435] pnp 00:01: [io 0x0020-0x003f]
[ 0.196445] pnp 00:01: [io 0x0044-0x005f]
[ 0.196448] pnp 00:01: [io 0x0062-0x0063]
[ 0.196451] pnp 00:01: [io 0x0065-0x006f]
[ 0.196454] pnp 00:01: [io 0x0072-0x007f]
[ 0.196457] pnp 00:01: [io 0x0080]
[ 0.196459] pnp 00:01: [io 0x0084-0x0086]
[ 0.196462] pnp 00:01: [io 0x0088]
[ 0.196465] pnp 00:01: [io 0x008c-0x008e]
[ 0.196468] pnp 00:01: [io 0x0090-0x009f]
[ 0.196471] pnp 00:01: [io 0x00a0-0x00bf]
[ 0.196473] pnp 00:01: [io 0x00e0-0x00ef]
[ 0.196476] pnp 00:01: [io 0x0290-0x0297]
[ 0.196479] pnp 00:01: [io 0x0480-0x048f]
[ 0.196482] pnp 00:01: [io 0x04d0-0x04d1]
[ 0.196485] pnp 00:01: [io 0x0c00-0x0c1f]
[ 0.196488] pnp 00:01: [io 0x03f0-0x03f1]
[ 0.196491] pnp 00:01: [mem 0xfee00000-0xfeefffff]
[ 0.196618] system 00:01: [io 0x0290-0x0297] has been reserved
[ 0.196694] system 00:01: [io 0x0480-0x048f] has been reserved
[ 0.196768] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.196842] system 00:01: [io 0x0c00-0x0c1f] has been reserved
[ 0.196916] system 00:01: [io 0x03f0-0x03f1] has been reserved
[ 0.196985] system 00:01: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.197062] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.197096] pnp 00:02: [dma 4]
[ 0.197099] pnp 00:02: [io 0x0000-0x000f]
[ 0.197102] pnp 00:02: [io 0x0081-0x0083]
[ 0.197105] pnp 00:02: [io 0x0087]
[ 0.197108] pnp 00:02: [io 0x0089-0x008b]
[ 0.197111] pnp 00:02: [io 0x008f]
[ 0.197114] pnp 00:02: [io 0x00c0-0x00df]
[ 0.197185] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.197204] pnp 00:03: [io 0x0070-0x0071]
[ 0.197225] pnp 00:03: [irq 8]
[ 0.197298] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.197313] pnp 00:04: [io 0x0061]
[ 0.197390] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.197406] pnp 00:05: [io 0x00f0-0x00ff]
[ 0.197413] pnp 00:05: [irq 13]
[ 0.197484] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.197630] pnp 00:06: [io 0x03f2-0x03f3]
[ 0.197634] pnp 00:06: [io 0x03f4-0x03f5]
[ 0.197637] pnp 00:06: [io 0x03f7]
[ 0.197643] pnp 00:06: [irq 6]
[ 0.197646] pnp 00:06: [dma 2]
[ 0.197749] pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.198060] pnp 00:07: [io 0x03f8-0x03ff]
[ 0.198067] pnp 00:07: [irq 4]
[ 0.198207] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.198461] pnp 00:08: [io 0x02f8-0x02ff]
[ 0.198468] pnp 00:08: [irq 3]
[ 0.198600] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.199076] pnp 00:09: [io 0x0378-0x037f]
[ 0.199080] pnp 00:09: [io 0x0778-0x077b]
[ 0.199086] pnp 00:09: [irq 7]
[ 0.199089] pnp 00:09: [dma 3]
[ 0.199250] pnp 00:09: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.199674] pnp: PnP ACPI: found 10 devices
[ 0.199745] ACPI: ACPI bus type pnp unregistered
[ 0.239952] Switching to clocksource acpi_pm
[ 0.239993] PCI: max bus depth: 1 pci_try_num: 2
[ 0.240012] pci 0000:00:01.0: PCI bridge to [bus 01-02]
[ 0.240087] pci 0000:00:01.0: bridge window [io 0x8000-0x8fff]
[ 0.240164] pci 0000:00:01.0: bridge window [mem 0xcfc00000-0xcfdfffff]
[ 0.240242] pci 0000:00:01.0: bridge window [mem 0xaf900000-0xcfafffff pref]
[ 0.240367] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.240370] pci_bus 0000:00: resource 1 [mem 0x00000000-0x3ffffffff]
[ 0.240375] pci_bus 0000:01: resource 0 [io 0x8000-0x8fff]
[ 0.240378] pci_bus 0000:01: resource 1 [mem 0xcfc00000-0xcfdfffff]
[ 0.240382] pci_bus 0000:01: resource 2 [mem 0xaf900000-0xcfafffff pref]
[ 0.240447] NET: Registered protocol family 2
[ 0.240582] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.241061] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.243887] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.244492] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.244567] TCP reno registered
[ 0.244638] UDP hash table entries: 512 (order: 1, 8192 bytes)
[ 0.244727] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes)
[ 0.244949] NET: Registered protocol family 1
[ 0.245189] RPC: Registered named UNIX socket transport module.
[ 0.245263] RPC: Registered udp transport module.
[ 0.245333] RPC: Registered tcp transport module.
[ 0.245404] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.245540] pci 0000:00:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.318023] pci 0000:00:03.0: PCI INT A disabled
[ 0.318110] pci 0000:00:03.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.380016] pci 0000:00:03.1: PCI INT B disabled
[ 0.380102] pci 0000:00:03.2: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 0.380190] pci 0000:00:03.2: PCI INT D disabled
[ 0.380279] pci 0000:01:00.0: Boot video device
[ 0.380287] PCI: CLS 32 bytes, default 32
[ 0.380390] Trying to unpack rootfs image as initramfs...
[ 0.503728] Freeing initrd memory: 3676k freed
[ 0.510694] Intel AES-NI instructions are not detected.
[ 0.511180] audit: initializing netlink socket (disabled)
[ 0.511273] type=2000 audit(1360995336.510:1): initialized
[ 0.512020] highmem bounce pool size: 64 pages
[ 0.517362] VFS: Disk quotas dquot_6.5.2
[ 0.517545] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.518076] ROMFS MTD (C) 2007 Red Hat, Inc.
[ 0.518234] msgmni has been set to 1733
[ 0.519465] async_tx: api initialized (async)
[ 0.519687] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.519823] io scheduler noop registered
[ 0.519894] io scheduler deadline registered
[ 0.519972] io scheduler cfq registered (default)
[ 0.520398] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.520865] ERST: Table is not found!
[ 0.520936] GHES: HEST is not enabled!
[ 0.521029] isapnp: Scanning for PnP cards...
[ 0.877240] isapnp: No Plug & Play device found
[ 0.881869] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.146094] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.410092] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.431095] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.451778] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.452563] Floppy drive(s): fd0 is 1.44M
[ 1.467184] FDC 0 is a post-1991 82077
[ 1.471893] brd: module loaded
[ 1.473553] sata_sil 0000:00:0b.0: version 2.4
[ 1.473623] sata_sil 0000:00:0b.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.474270] scsi0 : sata_sil
[ 1.474497] scsi1 : sata_sil
[ 1.474696] ata1: SATA max UDMA/100 mmio m512@...ffffe00 tf 0xcffffe80 irq 17
[ 1.474773] ata2: SATA max UDMA/100 mmio m512@...ffffe00 tf 0xcffffec0 irq 17
[ 1.477233] pata_sis 0000:00:02.5: version 0.5.2
[ 1.477275] pata_sis 0000:00:02.5: SiS 962/963 MuTIOL IDE UDMA133 controller
[ 1.478085] scsi2 : pata_sis
[ 1.478308] scsi3 : pata_sis
[ 1.479177] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[ 1.479254] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[ 1.480621] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.517382] Refined TSC clocksource calibration: 2083.095 MHz.
[ 1.517461] Switching to clocksource tsc
[ 1.517562] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.517914] mousedev: PS/2 mouse device common for all mice
[ 1.518080] rtc_cmos 00:03: RTC can wake from S4
[ 1.518355] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.518448] rtc0: alarms up to one month, 114 bytes nvram
[ 1.518572] md: linear personality registered for level -1
[ 1.518645] md: raid0 personality registered for level 0
[ 1.518718] md: raid1 personality registered for level 1
[ 1.518790] md: raid10 personality registered for level 10
[ 1.518862] md: raid6 personality registered for level 6
[ 1.518933] md: raid5 personality registered for level 5
[ 1.519011] md: raid4 personality registered for level 4
[ 1.519083] md: multipath personality registered for level -4
[ 1.519283] device-mapper: uevent: version 1.0.3
[ 1.519518] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@...hat.com
[ 1.519724] cpuidle: using governor ladder
[ 1.519796] cpuidle: using governor menu
[ 1.519952] TCP cubic registered
[ 1.520027] Initializing XFRM netlink socket
[ 1.520112] NET: Registered protocol family 17
[ 1.520200] Registering the dns_resolver key type
[ 1.520286] Using IPI Shortcut mode
[ 1.779017] ata1: SATA link down (SStatus 0 SControl 310)
[ 2.084024] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 2.103273] ata2.00: ATA-7: SAMSUNG HD103SI, 1AG01118, max UDMA7
[ 2.103348] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.122260] ata2.00: configured for UDMA/100
[ 2.122511] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD103SI 1AG0 PQ: 0 ANSI: 5
[ 2.122930] sd 1:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 2.123114] sd 1:0:0:0: [sda] Write Protect is off
[ 2.123187] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.123219] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.129162] sda: sda1
[ 2.129572] sd 1:0:0:0: [sda] Attached SCSI disk
[ 2.277302] ata4.00: ATAPI: HL-DT-STDVD-RAM GSA-H55N, 1.03, max UDMA/66
[ 2.283298] ata4.00: configured for UDMA/66
[ 2.285822] scsi 3:0:0:0: CD-ROM HL-DT-ST DVD-RAM GSA-H55N 1.03 PQ: 0 ANSI: 5
[ 2.288553] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.288665] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.288940] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 2.289215] registered taskstats version 1
[ 2.289846] rtc_cmos 00:03: setting system clock to 2013-02-16 06:15:39 UTC (1360995339)
[ 2.290167] Freeing unused kernel memory: 472k freed
[ 2.290926] Write protecting the kernel text: 3376k
[ 2.291055] Write protecting the kernel read-only data: 1372k
[ 2.312430] udevd[838]: starting version 182
[ 3.613920] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 4.477792] loop: module loaded
[ 4.696030] udevd[1001]: starting version 182
[ 5.384147] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 5.384273] ACPI: Power Button [PWRB]
[ 5.384450] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 5.384565] ACPI: Sleep Button [SLPB]
[ 5.384714] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 5.384825] ACPI: Power Button [PWRF]
[ 5.441843] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 5.444628] parport_pc 00:09: reported by Plug and Play ACPI
[ 5.444787] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[ 5.536495] sis900.c: v1.08.10 Apr. 2 2006
[ 5.536637] sis900 0000:00:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 5.537869] 0000:00:04.0: VIA 6103 PHY transceiver found at address 1.
[ 5.547133] 0000:00:04.0: Using transceiver found at address 1 as default
[ 5.548152] 8139too: 8139too Fast Ethernet driver 0.9.28
[ 5.549135] eth0: SiS 900 PCI Fast Ethernet at 0xc800, IRQ 19, 00:19:21:9b:5b:e7
[ 5.549303] 8139too 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 5.549787] 8139too 0000:00:0a.0: eth1: RealTek RTL8139 at 0xc400, 00:e0:29:9b:1a:15, IRQ 18
[ 5.556584] udevd[1010]: renamed network interface eth0 to eth1
[ 5.558537] udevd[1008]: renamed network interface eth1 to rename3
[ 5.608959] udevd[1008]: renamed network interface rename3 to eth0
[ 5.685731] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 5.685876] ehci_hcd 0000:00:03.2: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 5.685982] ehci_hcd 0000:00:03.2: EHCI Host Controller
[ 5.686649] ehci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 1
[ 5.686838] ehci_hcd 0000:00:03.2: irq 23, io mem 0xcffdf000
[ 5.692014] ehci_hcd 0000:00:03.2: USB 2.0 started, EHCI 1.00
[ 5.692141] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 5.692217] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.692327] usb usb1: Product: EHCI Host Controller
[ 5.692399] usb usb1: Manufacturer: Linux 3.2.38 ehci_hcd
[ 5.692471] usb usb1: SerialNumber: 0000:00:03.2
[ 5.692798] hub 1-0:1.0: USB hub found
[ 5.692876] hub 1-0:1.0: 6 ports detected
[ 5.699268] Linux agpgart interface v0.103
[ 5.726032] sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x0c00
[ 5.726165] ACPI: resource 0000:00:02.1 [io 0x0c00-0x0c1f] conflicts with ACPI region SMRG [io 0xc00-0xc1f]
[ 5.726321] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.759065] ppdev: user-space parallel port driver
[ 5.777400] agpgart-sis 0000:00:00.0: SiS chipset [1039/0746]
[ 5.788180] agpgart-sis 0000:00:00.0: AGP aperture is 128M @ 0xd0000000
[ 6.015994] [drm] Initialized drm 1.1.0 20060810
[ 6.109638] [drm] radeon kernel modesetting enabled.
[ 6.109875] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 6.110320] [drm] initializing kernel modesetting (RV515 0x1002:0x7142 0x1002:0x030B).
[ 6.110464] [drm] register mmio base: 0xCFDF0000
[ 6.110536] [drm] register mmio size: 65536
[ 6.112414] ATOM BIOS: PCP
[ 6.112519] agpgart-sis 0000:00:00.0: AGP 3.0 bridge
[ 6.112607] agpgart-sis 0000:00:00.0: putting AGP V3 device at 0000:00:00.0 into 8x mode
[ 6.112720] agpgart-sis 0000:00:00.0: SiS delay workaround: giving bridge time to recover
[ 6.130768] snd_ens1371 0000:00:0c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 6.175076] agpgart-sis 0000:00:00.0: putting AGP V3 device at 0000:01:00.0 into 8x mode
[ 6.175209] radeon 0000:01:00.0: GTT: 128M 0xD0000000 - 0xD7FFFFFF
[ 6.175289] [drm] Generation 2 PCI interface, using max accessible memory
[ 6.175368] radeon 0000:01:00.0: VRAM: 256M 0x0000000000000000 - 0x000000000FFFFFFF (256M used)
[ 6.175531] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 6.175605] [drm] Driver supports precise vblank timestamp query.
[ 6.175704] [drm] radeon: irq initialized.
[ 6.176063] [drm] Detected VRAM RAM=256M, BAR=256M
[ 6.176144] [drm] RAM width 128bits DDR
[ 6.189066] [TTM] Zone kernel: Available graphics memory: 443964 kiB.
[ 6.189150] [TTM] Zone highmem: Available graphics memory: 773664 kiB.
[ 6.189224] [TTM] Initializing pool allocator.
[ 6.189344] [drm] radeon: 256M of VRAM memory ready
[ 6.189416] [drm] radeon: 128M of GTT memory ready.
[ 6.189513] [drm] GART: num cpu pages 32768, num gpu pages 32768
[ 6.198099] [drm] radeon: 1 quad pipes, 1 z pipes initialized.
[ 6.206853] radeon 0000:01:00.0: WB disabled
[ 6.208639] [drm] Loading R500 Microcode
[ 6.269861] [drm] radeon: ring at 0x00000000D0001000
[ 6.269970] [drm] ring test succeeded in 9 usecs
[ 6.270412] [drm] radeon: ib pool ready.
[ 6.270739] [drm] ib test succeeded in 0 usecs
[ 6.272668] [drm] Radeon Display Connectors
[ 6.272741] [drm] Connector 0:
[ 6.272810] [drm] VGA
[ 6.272879] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[ 6.272987] [drm] Encoders:
[ 6.273063] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 6.273134] [drm] Connector 1:
[ 6.273202] [drm] S-video
[ 6.273270] [drm] Encoders:
[ 6.273337] [drm] TV1: INTERNAL_KLDSCP_DAC2
[ 6.273408] [drm] Connector 2:
[ 6.273475] [drm] DVI-I
[ 6.273542] [drm] HPD2
[ 6.273610] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[ 6.273719] [drm] Encoders:
[ 6.273786] [drm] CRT2: INTERNAL_KLDSCP_DAC2
[ 6.273857] [drm] DFP3: INTERNAL_LVTM1
[ 6.415356] [drm] fb mappable at 0xB0060000
[ 6.415435] [drm] vram apper at 0xB0000000
[ 6.415505] [drm] size 5300224
[ 6.415573] [drm] fb depth is 24
[ 6.415641] [drm] pitch is 5888
[ 6.415978] fbcon: radeondrmfb (fb0) is primary device
[ 6.450268] Console: switching to colour frame buffer device 180x56
[ 6.479613] fb0: radeondrmfb frame buffer device
[ 6.479766] drm: registered panic notifier
[ 6.480059] [drm] Initialized radeon 2.12.0 20080528 for 0000:01:00.0 on minor 0
[ 6.488621] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 7.479485] ohci_hcd 0000:00:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 7.479772] ohci_hcd 0000:00:03.0: OHCI Host Controller
[ 7.480018] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
[ 7.480302] ohci_hcd 0000:00:03.0: irq 20, io mem 0xcfffd000
[ 7.533062] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 7.533307] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 7.533550] usb usb2: Product: OHCI Host Controller
[ 7.533712] usb usb2: Manufacturer: Linux 3.2.38 ohci_hcd
[ 7.533892] usb usb2: SerialNumber: 0000:00:03.0
[ 7.534636] hub 2-0:1.0: USB hub found
[ 7.534774] hub 2-0:1.0: 3 ports detected
[ 7.535025] ohci_hcd 0000:00:03.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 7.535301] ohci_hcd 0000:00:03.1: OHCI Host Controller
[ 7.536252] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
[ 7.536543] ohci_hcd 0000:00:03.1: irq 21, io mem 0xcfffe000
[ 7.589098] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 7.589340] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 7.589582] usb usb3: Product: OHCI Host Controller
[ 7.589744] usb usb3: Manufacturer: Linux 3.2.38 ohci_hcd
[ 7.589924] usb usb3: SerialNumber: 0000:00:03.1
[ 7.593795] hub 3-0:1.0: USB hub found
[ 7.593946] hub 3-0:1.0: 3 ports detected
[ 7.891029] usb 2-2: new full-speed USB device number 2 using ohci_hcd
[ 7.948908] fuse init (API version 7.17)
[ 8.081010] usb 2-2: New USB device found, idVendor=058f, idProduct=9254
[ 8.087947] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 8.095230] usb 2-2: Product: Generic USB Hub
[ 8.102430] usb 2-2: Manufacturer: ALCOR
[ 8.113141] hub 2-2:1.0: USB hub found
[ 8.123018] hub 2-2:1.0: 4 ports detected
[ 8.415246] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr
[ 8.434999] usb 2-2.1: new low-speed USB device number 3 using ohci_hcd
[ 8.541985] usb 2-2.1: New USB device found, idVendor=046d, idProduct=c31c
[ 8.550002] usb 2-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 8.558076] usb 2-2.1: Product: USB Keyboard
[ 8.566110] usb 2-2.1: Manufacturer: Logitech
[ 8.656008] usb 2-2.2: new full-speed USB device number 4 using ohci_hcd
[ 8.770981] usb 2-2.2: New USB device found, idVendor=046d, idProduct=c245
[ 8.779340] usb 2-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 8.787731] usb 2-2.2: Product: Gaming Mouse G400
[ 8.796090] usb 2-2.2: Manufacturer: Logitech
[ 8.879018] usb 2-2.3: new low-speed USB device number 5 using ohci_hcd
[ 8.990003] usb 2-2.3: New USB device found, idVendor=10d5, idProduct=55a2
[ 8.998435] usb 2-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 9.006773] usb 2-2.3: Product: 2Port KVMSwicther
[ 9.015012] usb 2-2.3: Manufacturer: No brand
[ 9.023154] usb 2-2.3: SerialNumber: 0.Â
[ 9.393689] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:03.0/usb2/2-2/2-2.1/2-2.1:1.0/input/input3
[ 9.404196] generic-usb 0003:046D:C31C.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:03.0-2.1/input0
[ 9.431130] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:03.0/usb2/2-2/2-2.1/2-2.1:1.1/input/input4
[ 9.441179] generic-usb 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:03.0-2.1/input1
[ 9.456519] input: Logitech Gaming Mouse G400 as /devices/pci0000:00/0000:00:03.0/usb2/2-2/2-2.2/2-2.2:1.0/input/input5
[ 9.466711] generic-usb 0003:046D:C245.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech Gaming Mouse G400] on usb-0000:00:03.0-2.2/input0
[ 9.491314] generic-usb 0003:046D:C245.0004: hiddev0,hidraw3: USB HID v1.10 Device [Logitech Gaming Mouse G400] on usb-0000:00:03.0-2.2/input1
[ 9.515102] input: No brand 2Port KVMSwicther as /devices/pci0000:00/0000:00:03.0/usb2/2-2/2-2.3/2-2.3:1.0/input/input6
[ 9.528845] generic-usb 0003:10D5:55A2.0005: input,hidraw4: USB HID v1.10 Keyboard [No brand 2Port KVMSwicther] on usb-0000:00:03.0-2.3/input0
[ 9.542171] usbhid 2-2.3:1.1: couldn't find an input interrupt endpoint
[ 9.553382] usbcore: registered new interface driver usbhid
[ 9.563851] usbhid: USB HID core driver
[ 13.373287] PPP generic driver version 2.4.2
[ 13.447110] usbcore: registered new interface driver snd-usb-audio
[ 13.469967] uhci_hcd: USB Universal Host Controller Interface driver
[ 13.497923] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 13.961435] it87: Found IT8705F chip at 0x290, revision 3
[ 19.304901] Adding 2047996k swap on /swap. Priority:-1 extents:33 across:63414268k
[ 22.074116] 8139too 0000:00:0a.0: eth0: link down
[ 31.781442] NET: Registered protocol family 10
[ 31.781849] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 36.958602] eth1: Media Link On 100mbps full-duplex
[ 38.333024] PPP BSD Compression module registered
[ 39.361044] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 39.373091] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 44.178023] eth1: no IPv6 routers present
Content of type "application/pgp-signature" skipped
Powered by blists - more mailing lists