| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1361288997.2323.32.camel@rzhang1-mobl4>
Date: Tue, 19 Feb 2013 23:49:57 +0800
From: Zhang Rui <rui.zhang@...el.com>
To: Amit Daniel Kachhap <amit.daniel@...sung.com>
Cc: linux-pm@...r.kernel.org, jonghwa3.lee@...sung.com,
linux-samsung-soc@...r.kernel.org, linux-kernel@...r.kernel.org,
kgene.kim@...sung.com
Subject: Re: [PATCH V3 1/2] Thermal: exynos: Add support for temperature
falling interrupt.
On Thu, 2013-02-07 at 17:13 -0800, Amit Daniel Kachhap wrote:
> From: Jonghwa Lee <jonghwa3.lee@...sung.com>
>
> This patch introduces using temperature falling interrupt in exynos
> thermal driver. Former patch, it only use polling way to check
> whether if system themperature is fallen. However, exynos SOC also
> provides temperature falling interrupt way to do same things by hw.
> This feature is not supported in exynos4210.
>
> Acked-by: Kukjin Kim <kgene.kim@...sung.com>
> Signed-off-by: Jonghwa Lee <jonghwa3.lee@...sung.com>
> Signed-off-by: Amit Daniel Kachhap <amit.daniel@...sung.com>
applied to thermal -next.
thanks,
rui
> ---
> Hi,
>
> Submitting these patches again as they got lost somewhere and was not merged.
>
> Changes since V2:
> * Rebased against Rui Zhang next tree.
> * Added Kukjin Kim acked by.
>
> Changes since V1: Used the new thermal trend type macro
>
> All these patches are based on thermal maintainer next branch.
> git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux.git thermal
>
> drivers/thermal/exynos_thermal.c | 81 +++++++++++++++-----------
> include/linux/platform_data/exynos_thermal.h | 3 +
> 2 files changed, 49 insertions(+), 35 deletions(-)
>
> diff --git a/drivers/thermal/exynos_thermal.c b/drivers/thermal/exynos_thermal.c
> index 3a1b01e..65f69cf 100644
> --- a/drivers/thermal/exynos_thermal.c
> +++ b/drivers/thermal/exynos_thermal.c
> @@ -94,6 +94,7 @@
> #define SENSOR_NAME_LEN 16
> #define MAX_TRIP_COUNT 8
> #define MAX_COOLING_DEVICE 4
> +#define MAX_THRESHOLD_LEVS 4
>
> #define ACTIVE_INTERVAL 500
> #define IDLE_INTERVAL 10000
> @@ -133,6 +134,7 @@ struct exynos_tmu_data {
> struct thermal_trip_point_conf {
> int trip_val[MAX_TRIP_COUNT];
> int trip_count;
> + u8 trigger_falling;
> };
>
> struct thermal_cooling_conf {
> @@ -183,7 +185,8 @@ static int exynos_set_mode(struct thermal_zone_device *thermal,
>
> mutex_lock(&th_zone->therm_dev->lock);
>
> - if (mode == THERMAL_DEVICE_ENABLED)
> + if (mode == THERMAL_DEVICE_ENABLED &&
> + !th_zone->sensor_conf->trip_data.trigger_falling)
> th_zone->therm_dev->polling_delay = IDLE_INTERVAL;
> else
> th_zone->therm_dev->polling_delay = 0;
> @@ -447,7 +450,8 @@ static void exynos_report_trigger(void)
> break;
> }
>
> - if (th_zone->mode == THERMAL_DEVICE_ENABLED) {
> + if (th_zone->mode == THERMAL_DEVICE_ENABLED &&
> + !th_zone->sensor_conf->trip_data.trigger_falling) {
> if (i > 0)
> th_zone->therm_dev->polling_delay = ACTIVE_INTERVAL;
> else
> @@ -486,7 +490,8 @@ static int exynos_register_thermal(struct thermal_sensor_conf *sensor_conf)
>
> th_zone->therm_dev = thermal_zone_device_register(sensor_conf->name,
> EXYNOS_ZONE_COUNT, 0, NULL, &exynos_dev_ops, NULL, 0,
> - IDLE_INTERVAL);
> + sensor_conf->trip_data.trigger_falling ?
> + 0 : IDLE_INTERVAL);
>
> if (IS_ERR(th_zone->therm_dev)) {
> pr_err("Failed to register thermal zone device\n");
> @@ -593,8 +598,9 @@ static int exynos_tmu_initialize(struct platform_device *pdev)
> {
> struct exynos_tmu_data *data = platform_get_drvdata(pdev);
> struct exynos_tmu_platform_data *pdata = data->pdata;
> - unsigned int status, trim_info, rising_threshold;
> - int ret = 0, threshold_code;
> + unsigned int status, trim_info;
> + unsigned int rising_threshold = 0, falling_threshold = 0;
> + int ret = 0, threshold_code, i, trigger_levs = 0;
>
> mutex_lock(&data->lock);
> clk_enable(data->clk);
> @@ -619,6 +625,11 @@ static int exynos_tmu_initialize(struct platform_device *pdev)
> (data->temp_error2 != 0))
> data->temp_error1 = pdata->efuse_value;
>
> + /* Count trigger levels to be enabled */
> + for (i = 0; i < MAX_THRESHOLD_LEVS; i++)
> + if (pdata->trigger_levels[i])
> + trigger_levs++;
> +
> if (data->soc == SOC_ARCH_EXYNOS4210) {
> /* Write temperature code for threshold */
> threshold_code = temp_to_code(data, pdata->threshold);
> @@ -628,44 +639,38 @@ static int exynos_tmu_initialize(struct platform_device *pdev)
> }
> writeb(threshold_code,
> data->base + EXYNOS4210_TMU_REG_THRESHOLD_TEMP);
> -
> - writeb(pdata->trigger_levels[0],
> - data->base + EXYNOS4210_TMU_REG_TRIG_LEVEL0);
> - writeb(pdata->trigger_levels[1],
> - data->base + EXYNOS4210_TMU_REG_TRIG_LEVEL1);
> - writeb(pdata->trigger_levels[2],
> - data->base + EXYNOS4210_TMU_REG_TRIG_LEVEL2);
> - writeb(pdata->trigger_levels[3],
> - data->base + EXYNOS4210_TMU_REG_TRIG_LEVEL3);
> + for (i = 0; i < trigger_levs; i++)
> + writeb(pdata->trigger_levels[i],
> + data->base + EXYNOS4210_TMU_REG_TRIG_LEVEL0 + i * 4);
>
> writel(EXYNOS4210_TMU_INTCLEAR_VAL,
> data->base + EXYNOS_TMU_REG_INTCLEAR);
> } else if (data->soc == SOC_ARCH_EXYNOS) {
> - /* Write temperature code for threshold */
> - threshold_code = temp_to_code(data, pdata->trigger_levels[0]);
> - if (threshold_code < 0) {
> - ret = threshold_code;
> - goto out;
> - }
> - rising_threshold = threshold_code;
> - threshold_code = temp_to_code(data, pdata->trigger_levels[1]);
> - if (threshold_code < 0) {
> - ret = threshold_code;
> - goto out;
> - }
> - rising_threshold |= (threshold_code << 8);
> - threshold_code = temp_to_code(data, pdata->trigger_levels[2]);
> - if (threshold_code < 0) {
> - ret = threshold_code;
> - goto out;
> + /* Write temperature code for rising and falling threshold */
> + for (i = 0; i < trigger_levs; i++) {
> + threshold_code = temp_to_code(data,
> + pdata->trigger_levels[i]);
> + if (threshold_code < 0) {
> + ret = threshold_code;
> + goto out;
> + }
> + rising_threshold |= threshold_code << 8 * i;
> + if (pdata->threshold_falling) {
> + threshold_code = temp_to_code(data,
> + pdata->trigger_levels[i] -
> + pdata->threshold_falling);
> + if (threshold_code > 0)
> + falling_threshold |=
> + threshold_code << 8 * i;
> + }
> }
> - rising_threshold |= (threshold_code << 16);
>
> writel(rising_threshold,
> data->base + EXYNOS_THD_TEMP_RISE);
> - writel(0, data->base + EXYNOS_THD_TEMP_FALL);
> + writel(falling_threshold,
> + data->base + EXYNOS_THD_TEMP_FALL);
>
> - writel(EXYNOS_TMU_CLEAR_RISE_INT|EXYNOS_TMU_CLEAR_FALL_INT,
> + writel(EXYNOS_TMU_CLEAR_RISE_INT | EXYNOS_TMU_CLEAR_FALL_INT,
> data->base + EXYNOS_TMU_REG_INTCLEAR);
> }
> out:
> @@ -698,6 +703,8 @@ static void exynos_tmu_control(struct platform_device *pdev, bool on)
> pdata->trigger_level2_en << 8 |
> pdata->trigger_level1_en << 4 |
> pdata->trigger_level0_en;
> + if (pdata->threshold_falling)
> + interrupt_en |= interrupt_en << 16;
> } else {
> con |= EXYNOS_TMU_CORE_OFF;
> interrupt_en = 0; /* Disable all interrupts */
> @@ -773,7 +780,8 @@ static void exynos_tmu_work(struct work_struct *work)
> mutex_lock(&data->lock);
> clk_enable(data->clk);
> if (data->soc == SOC_ARCH_EXYNOS)
> - writel(EXYNOS_TMU_CLEAR_RISE_INT,
> + writel(EXYNOS_TMU_CLEAR_RISE_INT |
> + EXYNOS_TMU_CLEAR_FALL_INT,
> data->base + EXYNOS_TMU_REG_INTCLEAR);
> else
> writel(EXYNOS4210_TMU_INTCLEAR_VAL,
> @@ -829,6 +837,7 @@ static struct exynos_tmu_platform_data const exynos4210_default_tmu_data = {
>
> #if defined(CONFIG_SOC_EXYNOS5250) || defined(CONFIG_SOC_EXYNOS4412)
> static struct exynos_tmu_platform_data const exynos_default_tmu_data = {
> + .threshold_falling = 10,
> .trigger_levels[0] = 85,
> .trigger_levels[1] = 103,
> .trigger_levels[2] = 110,
> @@ -1076,6 +1085,8 @@ static int __devinit exynos_tmu_probe(struct platform_device *pdev)
> exynos_sensor_conf.trip_data.trip_val[i] =
> pdata->threshold + pdata->trigger_levels[i];
>
> + exynos_sensor_conf.trip_data.trigger_falling = pdata->threshold_falling;
> +
> exynos_sensor_conf.cooling_data.freq_clip_count =
> pdata->freq_tab_count;
> for (i = 0; i < pdata->freq_tab_count; i++) {
> diff --git a/include/linux/platform_data/exynos_thermal.h b/include/linux/platform_data/exynos_thermal.h
> index a7bdb2f..da7e627 100644
> --- a/include/linux/platform_data/exynos_thermal.h
> +++ b/include/linux/platform_data/exynos_thermal.h
> @@ -53,6 +53,8 @@ struct freq_clip_table {
> * struct exynos_tmu_platform_data
> * @threshold: basic temperature for generating interrupt
> * 25 <= threshold <= 125 [unit: degree Celsius]
> + * @threshold_falling: differntial value for setting threshold
> + * of temperature falling interrupt.
> * @trigger_levels: array for each interrupt levels
> * [unit: degree Celsius]
> * 0: temperature for trigger_level0 interrupt
> @@ -97,6 +99,7 @@ struct freq_clip_table {
> */
> struct exynos_tmu_platform_data {
> u8 threshold;
> + u8 threshold_falling;
> u8 trigger_levels[4];
> bool trigger_level0_en;
> bool trigger_level1_en;
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists