lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <alpine.LNX.2.00.1302201159310.1152@eggly.anvils>
Date:	Wed, 20 Feb 2013 12:21:15 -0800 (PST)
From:	Hugh Dickins <hughd@...gle.com>
To:	Greg Thelen <gthelen@...gle.com>
cc:	akpm@...ux-foundation.org, linux-mm@...ck.org,
	linux-kernel@...r.kernel.org
Subject: Re: [PATCH 1/2] tmpfs: fix use-after-free of mempolicy object

On Tue, 19 Feb 2013, Greg Thelen wrote:

> The tmpfs remount logic preserves filesystem mempolicy if the mpol=M
> option is not specified in the remount request.  A new policy can be
> specified if mpol=M is given.
> 
> Before this patch remounting an mpol bound tmpfs without specifying
> mpol= mount option in the remount request would set the filesystem's
> mempolicy object to a freed mempolicy object.
> 
> To reproduce the problem boot a DEBUG_PAGEALLOC kernel and run:
>     # mkdir /tmp/x
> 
>     # mount -t tmpfs -o size=100M,mpol=interleave nodev /tmp/x
> 
>     # grep /tmp/x /proc/mounts
>     nodev /tmp/x tmpfs rw,relatime,size=102400k,mpol=interleave:0-3 0 0
> 
>     # mount -o remount,size=200M nodev /tmp/x
> 
>     # grep /tmp/x /proc/mounts
>     nodev /tmp/x tmpfs rw,relatime,size=204800k,mpol=??? 0 0
>         # note ? garbage in mpol=... output above
> 
>     # dd if=/dev/zero of=/tmp/x/f count=1
>         # panic here
> 
> Panic:
>     BUG: unable to handle kernel NULL pointer dereference at           (null)
>     IP: [<          (null)>]           (null)
>     [...]
>     Oops: 0010 [#1] SMP DEBUG_PAGEALLOC
>     Call Trace:
>      [<ffffffff81186ead>] ? mpol_set_nodemask+0x8d/0x100
>      [<ffffffff811895ef>] ? mpol_shared_policy_init+0x8f/0x160
>      [<ffffffff81189605>] mpol_shared_policy_init+0xa5/0x160
>      [<ffffffff811580e1>] ? shmem_get_inode+0x1e1/0x270
>      [<ffffffff811580e1>] ? shmem_get_inode+0x1e1/0x270
>      [<ffffffff810db15d>] ? trace_hardirqs_on+0xd/0x10
>      [<ffffffff81158109>] shmem_get_inode+0x209/0x270
>      [<ffffffff811581ae>] shmem_mknod+0x3e/0xf0
>      [<ffffffff811582b8>] shmem_create+0x18/0x20
>      [<ffffffff811af5d5>] vfs_create+0xb5/0x130
>      [<ffffffff811afff1>] do_last+0x9a1/0xea0
>      [<ffffffff811ac77a>] ? link_path_walk+0x7a/0x930
>      [<ffffffff811b05a3>] path_openat+0xb3/0x4d0
>      [<ffffffff811be831>] ? __alloc_fd+0x31/0x160
>      [<ffffffff811b0de2>] do_filp_open+0x42/0xa0
>      [<ffffffff811be8e0>] ? __alloc_fd+0xe0/0x160
>      [<ffffffff811a066e>] do_sys_open+0xfe/0x1e0
>      [<ffffffff811f0aeb>] compat_sys_open+0x1b/0x20
>      [<ffffffff815d6055>] cstar_dispatch+0x7/0x1f
> 
> Non-debug kernels will not crash immediately because referencing the
> dangling mpol will not cause a fault.  Instead the filesystem will
> reference a freed mempolicy object, which will cause unpredictable
> behavior.
> 
> The problem boils down to a dropped mpol reference below if
> shmem_parse_options() does not allocate a new mpol:
>     config = *sbinfo
>     shmem_parse_options(data, &config, true)
>     mpol_put(sbinfo->mpol)
>     sbinfo->mpol = config.mpol  /* BUG: saves unreferenced mpol */
> 
> This patch avoids the crash by not releasing the mempolicy if
> shmem_parse_options() doesn't create a new mpol.

This looks very good to me, thank you Greg.  I did start to wonder
about the consequence of an error in shmem_parse_options() after
allocating mempolicy, but you're ahead of me, and have sensibly
deferred leak fixes to 2/2.

> 
> How far back does this issue go?  I see it in both 2.6.36 and 3.3.  I
> did not look back further.

It probably goes back to 2.6.26, when the refcounting came in at this
mount level.  But there's been such a sad history of bugs in mempolicy
refcounting, occasionally one bug has protected against another.

And whether anyone actually uses these tmpfs mpol= options is another 
question.  2.6.26 claimed to add support for "mpol=local", yet nobody
noticed that it was rejected as an invalid option, until an independent
bugfix in 2.6.34 rearranged the code and happened to get it working.
I only discovered that a month or two ago, when working to fix the
corruption which 2.6.35 then immediately bestowed upon "mpol=local".

> 
> Signed-off-by: Greg Thelen <gthelen@...gle.com>

Acked-by: Hugh Dickins <hughd@...gle.com>

I'm inclined to add
Cc: stable@...r.kernel.org
to this one, but not to the 2/2 leak one; but I'm perfectly
happy if Andrew chooses differently when he picks them up.

> ---
>  mm/shmem.c | 10 ++++++++--
>  1 file changed, 8 insertions(+), 2 deletions(-)
> 
> diff --git a/mm/shmem.c b/mm/shmem.c
> index 5dd56f6..efd0b3a 100644
> --- a/mm/shmem.c
> +++ b/mm/shmem.c
> @@ -2487,6 +2487,7 @@ static int shmem_remount_fs(struct super_block *sb, int *flags, char *data)
>  	unsigned long inodes;
>  	int error = -EINVAL;
>  
> +	config.mpol = NULL;
>  	if (shmem_parse_options(data, &config, true))
>  		return error;
>  
> @@ -2511,8 +2512,13 @@ static int shmem_remount_fs(struct super_block *sb, int *flags, char *data)
>  	sbinfo->max_inodes  = config.max_inodes;
>  	sbinfo->free_inodes = config.max_inodes - inodes;
>  
> -	mpol_put(sbinfo->mpol);
> -	sbinfo->mpol        = config.mpol;	/* transfers initial ref */
> +	/*
> +	 * Preserve previous mempolicy unless mpol remount option was specified.
> +	 */
> +	if (config.mpol) {
> +		mpol_put(sbinfo->mpol);
> +		sbinfo->mpol = config.mpol;	/* transfers initial ref */
> +	}
>  out:
>  	spin_unlock(&sbinfo->stat_lock);
>  	return error;
> -- 
> 1.8.1.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ