| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <0e7e31fce0dc15bf14471d125e705c204b3ac77f.1361398610.git.rubini@gnudd.com>
Date: Wed, 20 Feb 2013 23:40:46 +0100
From: Alessandro Rubini <rubini@...dd.com>
To: linux-kernel@...r.kernel.org
Cc: Giancarlo Asnaghi <giancarlo.asnaghi@...com>,
Davide Ciminaghi <ciminaghi@...dd.com>, tglx@...utronix.de,
mingo@...hat.com, hpa@...or.com, x86@...nel.org,
linus.walleij@...aro.org, vinod.koul@...ux.intel.com
Subject: [PATCH V6 1/5] DMA: PL330: use prefix in reg names to build under
x86
This driver would not compile if ARM_AMBA is selected under x86,
because "CS" and "DS" are already defined there. But AMBA
is used in the x86 world by a PCI-to-AMBA bridge, to be submitted.
The patch just adds the "PL330_" prefix to all registers,
so it can be built by randomconfig after ARM_AMBA appears within x86.
No other technical changes have been performed.
The patch was build-tested only.
Signed-off-by: Alessandro Rubini <rubini@...dd.com>
Acked-by: Giancarlo Asnaghi <giancarlo.asnaghi@...com>
Signed-off-by: Davide Ciminaghi <ciminaghi@...dd.com>
Acked-by: Jassi Brar <jassisinghbrar@...il.com>
Acked-by: Linus Walleij <linus.walleij@...aro.org>
Acked-by: Vinod Koul <vinod.koul@...ux.intel.com>
Signed-off-by: H. Peter Anvin <hpa@...ux.intel.com>
---
@Jassi, Linus, Vinod: I repost this after rebasing, on hpa's suggestion.
Linus' ack: http://lkml.org/lkml/2012/9/16/93
Vinod's ack: http://lkml.org/lkml/2012/9/16/271
drivers/dma/pl330.c | 107 ++++++++++++++++++++++++++-------------------------
1 files changed, 54 insertions(+), 53 deletions(-)
diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c
index 7181531..b45cbe0 100644
--- a/drivers/dma/pl330.c
+++ b/drivers/dma/pl330.c
@@ -70,7 +70,7 @@ enum pl330_reqtype {
};
/* Register and Bit field Definitions */
-#define DS 0x0
+#define PL330_DS 0x0
#define DS_ST_STOP 0x0
#define DS_ST_EXEC 0x1
#define DS_ST_CMISS 0x2
@@ -84,33 +84,33 @@ enum pl330_reqtype {
#define DS_ST_FLTCMP 0xe
#define DS_ST_FAULT 0xf
-#define DPC 0x4
-#define INTEN 0x20
-#define ES 0x24
-#define INTSTATUS 0x28
-#define INTCLR 0x2c
-#define FSM 0x30
-#define FSC 0x34
-#define FTM 0x38
+#define PL330_DPC 0x4
+#define PL330_INTEN 0x20
+#define PL330_ES 0x24
+#define PL330_INTSTATUS 0x28
+#define PL330_INTCLR 0x2c
+#define PL330_FSM 0x30
+#define PL330_FSC 0x34
+#define PL330_FTM 0x38
#define _FTC 0x40
-#define FTC(n) (_FTC + (n)*0x4)
+#define PL330_FTC(n) (_FTC + (n)*0x4)
#define _CS 0x100
-#define CS(n) (_CS + (n)*0x8)
+#define PL330_CS(n) (_CS + (n)*0x8)
#define CS_CNS (1 << 21)
#define _CPC 0x104
-#define CPC(n) (_CPC + (n)*0x8)
+#define PL330_CPC(n) (_CPC + (n)*0x8)
#define _SA 0x400
-#define SA(n) (_SA + (n)*0x20)
+#define PL330_SA(n) (_SA + (n)*0x20)
#define _DA 0x404
-#define DA(n) (_DA + (n)*0x20)
+#define PL330_DA(n) (_DA + (n)*0x20)
#define _CC 0x408
-#define CC(n) (_CC + (n)*0x20)
+#define PL330_CC(n) (_CC + (n)*0x20)
#define CC_SRCINC (1 << 0)
#define CC_DSTINC (1 << 14)
@@ -131,24 +131,24 @@ enum pl330_reqtype {
#define CC_SWAP_SHFT 28
#define _LC0 0x40c
-#define LC0(n) (_LC0 + (n)*0x20)
+#define PL330_LC0(n) (_LC0 + (n)*0x20)
#define _LC1 0x410
-#define LC1(n) (_LC1 + (n)*0x20)
+#define PL330_LC1(n) (_LC1 + (n)*0x20)
-#define DBGSTATUS 0xd00
+#define PL330_DBGSTATUS 0xd00
#define DBG_BUSY (1 << 0)
-#define DBGCMD 0xd04
-#define DBGINST0 0xd08
-#define DBGINST1 0xd0c
+#define PL330_DBGCMD 0xd04
+#define PL330_DBGINST0 0xd08
+#define PL330_DBGINST1 0xd0c
-#define CR0 0xe00
-#define CR1 0xe04
-#define CR2 0xe08
-#define CR3 0xe0c
-#define CR4 0xe10
-#define CRD 0xe14
+#define PL330_CR0 0xe00
+#define PL330_CR1 0xe04
+#define PL330_CR2 0xe08
+#define PL330_CR3 0xe0c
+#define PL330_CR4 0xe10
+#define PL330_CRD 0xe14
#define PERIPH_ID 0xfe0
#define PERIPH_REV_SHIFT 20
@@ -1022,7 +1022,7 @@ static bool _until_dmac_idle(struct pl330_thread *thrd)
do {
/* Until Manager is Idle */
- if (!(readl(regs + DBGSTATUS) & DBG_BUSY))
+ if (!(readl(regs + PL330_DBGSTATUS) & DBG_BUSY))
break;
cpu_relax();
@@ -1045,10 +1045,10 @@ static inline void _execute_DBGINSN(struct pl330_thread *thrd,
val |= (1 << 0);
val |= (thrd->id << 8); /* Channel Number */
}
- writel(val, regs + DBGINST0);
+ writel(val, regs + PL330_DBGINST0);
val = *((u32 *)&insn[2]);
- writel(val, regs + DBGINST1);
+ writel(val, regs + PL330_DBGINST1);
/* If timed out due to halted state-machine */
if (_until_dmac_idle(thrd)) {
@@ -1057,7 +1057,7 @@ static inline void _execute_DBGINSN(struct pl330_thread *thrd,
}
/* Get going */
- writel(0, regs + DBGCMD);
+ writel(0, regs + PL330_DBGCMD);
}
/*
@@ -1082,9 +1082,9 @@ static inline u32 _state(struct pl330_thread *thrd)
u32 val;
if (is_manager(thrd))
- val = readl(regs + DS) & 0xf;
+ val = readl(regs + PL330_DS) & 0xf;
else
- val = readl(regs + CS(thrd->id)) & 0xf;
+ val = readl(regs + PL330_CS(thrd->id)) & 0xf;
switch (val) {
case DS_ST_STOP:
@@ -1151,7 +1151,8 @@ static void _stop(struct pl330_thread *thrd)
_emit_KILL(0, insn);
/* Stop generating interrupts for SEV */
- writel(readl(regs + INTEN) & ~(1 << thrd->ev), regs + INTEN);
+ writel(readl(regs + PL330_INTEN) & ~(1 << thrd->ev),
+ regs + PL330_INTEN);
_execute_DBGINSN(thrd, insn, is_manager(thrd));
}
@@ -1190,7 +1191,7 @@ static bool _trigger(struct pl330_thread *thrd)
if (r->cfg)
ns = r->cfg->nonsecure ? 1 : 0;
- else if (readl(regs + CS(thrd->id)) & CS_CNS)
+ else if (readl(regs + PL330_CS(thrd->id)) & CS_CNS)
ns = 1;
else
ns = 0;
@@ -1206,7 +1207,7 @@ static bool _trigger(struct pl330_thread *thrd)
_emit_GO(0, insn, &go);
/* Set to generate interrupts for SEV */
- writel(readl(regs + INTEN) | (1 << thrd->ev), regs + INTEN);
+ writel(readl(regs + PL330_INTEN) | (1 << thrd->ev), regs + PL330_INTEN);
/* Only manager can execute GO */
_execute_DBGINSN(thrd, insn, true);
@@ -1581,7 +1582,7 @@ static int pl330_submit_req(void *ch_id, struct pl330_req *r)
ccr = _prepare_ccr(r->cfg);
} else {
- ccr = readl(regs + CC(thrd->id));
+ ccr = readl(regs + PL330_CC(thrd->id));
}
/* If this req doesn't have valid xfer settings */
@@ -1658,7 +1659,7 @@ static void pl330_dotask(unsigned long data)
_stop(thrd);
- if (readl(regs + FSC) & (1 << thrd->id))
+ if (readl(regs + PL330_FSC) & (1 << thrd->id))
err = PL330_ERR_FAIL;
else
err = PL330_ERR_ABORT;
@@ -1703,13 +1704,13 @@ static int pl330_update(const struct pl330_info *pi)
spin_lock_irqsave(&pl330->lock, flags);
- val = readl(regs + FSM) & 0x1;
+ val = readl(regs + PL330_FSM) & 0x1;
if (val)
pl330->dmac_tbd.reset_mngr = true;
else
pl330->dmac_tbd.reset_mngr = false;
- val = readl(regs + FSC) & ((1 << pi->pcfg.num_chan) - 1);
+ val = readl(regs + PL330_FSC) & ((1 << pi->pcfg.num_chan) - 1);
pl330->dmac_tbd.reset_chan |= val;
if (val) {
int i = 0;
@@ -1717,8 +1718,8 @@ static int pl330_update(const struct pl330_info *pi)
if (val & (1 << i)) {
dev_info(pi->dev,
"Reset Channel-%d\t CS-%x FTC-%x\n",
- i, readl(regs + CS(i)),
- readl(regs + FTC(i)));
+ i, readl(regs + PL330_CS(i)),
+ readl(regs + PL330_FTC(i)));
_stop(&pl330->channels[i]);
}
i++;
@@ -1726,7 +1727,7 @@ static int pl330_update(const struct pl330_info *pi)
}
/* Check which event happened i.e, thread notified */
- val = readl(regs + ES);
+ val = readl(regs + PL330_ES);
if (pi->pcfg.num_events < 32
&& val & ~((1 << pi->pcfg.num_events) - 1)) {
pl330->dmac_tbd.reset_dmac = true;
@@ -1738,12 +1739,12 @@ static int pl330_update(const struct pl330_info *pi)
for (ev = 0; ev < pi->pcfg.num_events; ev++) {
if (val & (1 << ev)) { /* Event occurred */
struct pl330_thread *thrd;
- u32 inten = readl(regs + INTEN);
+ u32 inten = readl(regs + PL330_INTEN);
int active;
/* Clear the event */
if (inten & (1 << ev))
- writel(1 << ev, regs + INTCLR);
+ writel(1 << ev, regs + PL330_INTCLR);
ret = 1;
@@ -1950,41 +1951,41 @@ static void read_dmac_config(struct pl330_info *pi)
void __iomem *regs = pi->base;
u32 val;
- val = readl(regs + CRD) >> CRD_DATA_WIDTH_SHIFT;
+ val = readl(regs + PL330_CRD) >> CRD_DATA_WIDTH_SHIFT;
val &= CRD_DATA_WIDTH_MASK;
pi->pcfg.data_bus_width = 8 * (1 << val);
- val = readl(regs + CRD) >> CRD_DATA_BUFF_SHIFT;
+ val = readl(regs + PL330_CRD) >> CRD_DATA_BUFF_SHIFT;
val &= CRD_DATA_BUFF_MASK;
pi->pcfg.data_buf_dep = val + 1;
- val = readl(regs + CR0) >> CR0_NUM_CHANS_SHIFT;
+ val = readl(regs + PL330_CR0) >> CR0_NUM_CHANS_SHIFT;
val &= CR0_NUM_CHANS_MASK;
val += 1;
pi->pcfg.num_chan = val;
- val = readl(regs + CR0);
+ val = readl(regs + PL330_CR0);
if (val & CR0_PERIPH_REQ_SET) {
val = (val >> CR0_NUM_PERIPH_SHIFT) & CR0_NUM_PERIPH_MASK;
val += 1;
pi->pcfg.num_peri = val;
- pi->pcfg.peri_ns = readl(regs + CR4);
+ pi->pcfg.peri_ns = readl(regs + PL330_CR4);
} else {
pi->pcfg.num_peri = 0;
}
- val = readl(regs + CR0);
+ val = readl(regs + PL330_CR0);
if (val & CR0_BOOT_MAN_NS)
pi->pcfg.mode |= DMAC_MODE_NS;
else
pi->pcfg.mode &= ~DMAC_MODE_NS;
- val = readl(regs + CR0) >> CR0_NUM_EVENTS_SHIFT;
+ val = readl(regs + PL330_CR0) >> CR0_NUM_EVENTS_SHIFT;
val &= CR0_NUM_EVENTS_MASK;
val += 1;
pi->pcfg.num_events = val;
- pi->pcfg.irq_ns = readl(regs + CR3);
+ pi->pcfg.irq_ns = readl(regs + PL330_CR3);
pi->pcfg.periph_id = get_id(pi, PERIPH_ID);
pi->pcfg.pcell_id = get_id(pi, PCELL_ID);
--
1.7.7.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists