| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20130221184010.GA24692@kroah.com>
Date: Thu, 21 Feb 2013 10:40:10 -0800
From: Greg KH <gregkh@...uxfoundation.org>
To: Linus Torvalds <torvalds@...ux-foundation.org>,
Andrew Morton <akpm@...ux-foundation.org>
Cc: linux-kernel@...r.kernel.org, linux-usb@...r.kernel.org
Subject: [GIT PATCH] USB patches for 3.9-rc1
The following changes since commit 200e0d994d9d1919b28c87f1a5fb99a8e13b8a0f:
USB: storage: optimize to match the Huawei USB storage devices and support new switch command (2013-02-04 10:41:40 -0800)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git/ tags/usb-3.9-rc1
for you to fetch changes up to 6166805c3de539a41cfcae39026c5bc273d7c6aa:
Revert "USB: EHCI: make ehci-vt8500 a separate driver" (2013-02-20 10:26:31 -0800)
----------------------------------------------------------------
USB patches for 3.9-rc1
Here's the big USB merge for 3.9-rc1
Nothing major, lots of gadget fixes, and of course, xhci stuff.
All of this has been in linux-next for a while, with the exception of
the last 3 patches, which were reverts of patches in the tree that
caused problems, they went in yesterday.
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
----------------------------------------------------------------
Aaro Koskinen (1):
usb: musb: omap2430: fix the readiness check in omap_musb_mailbox
Alan Stern (3):
USB: fix sign-extension bug in the hub driver
USB: altsetting overrides for usbtest
USB: GADGET: optionally force full-speed for net2280 UDC
Andrzej Pietrasiewicz (1):
usb: gadget: f_mass_storage: remove unused operations
Armando Visconti (1):
usb: gadget zero: avoid unnecessary reinit of data in f_sourcesink
Arnd Bergmann (1):
USB: update host controller Kconfig entries
Arvid Brodin (1):
usb/isp1760: declare schedule_ptds() and errata2_function() static
Bjørn Mork (3):
USB: option: add and update Alcatel modems
USB: option: add Yota / Megafon M100-1 4g modem
USB: option: add Huawei "ACM" devices using protocol = vendor
Cesar Eduardo Barros (1):
usb: phy: mv-otg: use to_delayed_work instead of cast
Chao Xie (6):
usb: gadget: mv_udc: use udc_start and udc_stop functions
usb: gadget: mv_udc: use devm_xxx for probe
usb: gadget: mv_udc: fix the warning of mv_udc_remove
usb: otg: mv_otg: use devm_xxx for probe
usb: host: ehci-mv: remove unused variable
usb: gadget: mv_udc: fix the value of tranceiver
Chen Gang (5):
USB: ohci: set urb->hcpriv = NULL immediately, after free it
USB: uhci: check buffer length to avoid memory overflow
USB: uhci: beautify source code
drivers/usb/core: using strlcpy instead of strncpy
drivers/usb/gadget: using strlcpy instead of strncpy
Dan Carpenter (2):
USB: c67x00-ll-hpi.c: signedness bug in ll_recv_msg()
USB: wusbcore/wa-xfer: error handling fixes in setup_segs()
Dongjin Kim (4):
USB: misc: Add USB3503 High-Speed Hub Controller
USB: misc: fixup smatch WARNING
USB: misc: usb3503: add dt support
USB: misc: usb3503: Fix compiler warning
Fabio Baltieri (1):
usb: musb: ux500: use clk_prepare_enable and clk_disable_unprepare
Fabio Estevam (1):
USB: chipidea: ci13xxx_imx: Remove sparse warning
Felipe Balbi (21):
usb: dwc3: decrease event buffer size
usb: dwc3: gadget: don't redefine 'ret'
usb: dwc3: debugfs: convert our regdump to use regsets
usb: gadget: f_uac2: fix compile warning
usb: gadget: fix two sparse warnings
usb: dwc3: gadget: change HIRD threshold to 12
usb: gadget: amd5536udc: convert to udc_start/udc_stop
usb: gadget: fusb300_udc: convert to udc_start/udc_stop
usb: gadget: goku_udc: convert to udc_start/udc_stop
usb: gadget: fsl_udc_core: convert to udc_start/udc_stop
usb: gadget: m66592-udc: convert to udc_start/udc_stop
usb: gadget: omap_udc: convert to udc_start/udc_stop
usb: gadget: pch_udc: convert to udc_start/udc_stop
usb: gadget: pxa25x_udc: convert to udc_start/udc_stop
usb: gadget: pxa27x_udc: convert to udc_start/udc_stop
usb: gadget: s3c2410: convert to udc_start/udc_stop
usb: gadget: completely remove ->start/->stop
usb: gadget: constify all struct usb_gadget_ops
usb: phy: fix Kconfig warning
usb: omap_control_usb: fix compile warning
usb: gadget: imx_udc: make it depend on BROKEN
Fengguang Wu (1):
usb: misc: usb3503_probe() can be static
Frans Klaver (1):
usb: add driver for xsens motion trackers
Gerd Hoffmann (8):
uas: new function to cancel data urbs
uas: add UNLINK_DATA_URBS flag
uas: add IS_IN_WORK_LIST flag
uas: improve abort handler
uas: improve device reset
uas: fail any request submitted while resetting the device.
usb-uas: set max_lun and max_channel
usb-uas: update MAINTAINERS entry
Greg Kroah-Hartman (11):
Merge tag 'for-usb-next-2013-01-03' of git://git.kernel.org/.../sarah/xhci into usb-next
Merge 3.8-rc4 into usb-next
Merge tag 'musb-for-v3.9' of git://git.kernel.org/.../balbi/usb into usb-next
Merge tag 'dwc3-for-v3.9' of git://git.kernel.org/.../balbi/usb into usb-next
Merge tag 'gadget-for-v3.9' of git://git.kernel.org/.../balbi/usb into usb-next
Merge tag 'xceiv-for-v3.9' of git://git.kernel.org/.../balbi/usb into usb-next
Merge 3.8-rc5 into usb-next
Merge usb-linus branch into usb-next
Revert "USB: update host controller Kconfig entries"
Revert "USB: EHCI: make ehci-orion a separate driver"
Revert "USB: EHCI: make ehci-vt8500 a separate driver"
Heiko Carstens (1):
drivers/usb: add missing GENERIC_HARDIRQS dependencies
Javier Martinez Canillas (1):
usb: host: xhci: remove unused trb var in xhci_irq()
Jean-Christophe PLAGNIOL-VILLARD (1):
USB: gadget: at91_adc: fix pullup pin validity check
Jingoo Han (1):
usb: dwc3: exynos: use devm_ functions
Johan Hovold (6):
USB: io_ti: move write-fifo flushing to close
USB: io_ti: use tty-port drain delay
USB: serial: grab disconnect mutex in chars_in_buffer
USB: io_ti: query hardware-buffer status in chars_in_buffer
USB: io_ti: kill custom closing_wait implementation
USB: serial: fix null-pointer dereferences on disconnect
Josh Boyer (1):
USB: usb-storage: unusual_devs update for Super TOP SATA bridge
Julia Lawall (1):
drivers/usb/chipidea/core.c: adjust duplicate test
Kishon Vijay Abraham I (21):
usb: dwc3: omap: use device_for_each_child to handle child removal
usb: dwc3: omap: use of_platform API to create dwc3 core pdev
usb: dwc3: omap: use runtime API's to enable clocks
usb: dwc3: omap: Remove explicit writes to SYSCONFIG register
usb: dwc3: omap: Add an API to write to dwc mailbox
usb: dwc3: core: enable the USB2 and USB3 phy in probe
usb: dwc3: core: stray statements are removed
usb: otg: add an api to bind the usb controller and phy
usb: otg: utils: add facilities in phy lib to support multiple PHYs of same type
usb: otg: add device tree support to otg library
usb: phy: add a new driver for usb part of control module
usb: start using the control module driver
usb: phy: add a new driver for usb3 phy
usb: musb: omap: make use of the new PHY lib APIs
usb: musb: omap: get phy by phandle for dt boot
usb: phy: omap-usb2: enable 960Mhz clock for omap5
usb: dwc3: core: add dt support for dwc3 core
ARM: OMAP4: remove control module address space from PHY and OTG
ARM: OMAP: devices: create device for usb part of control module
ARM: OMAP2: MUSB: Specify omap4 has mailbox
ARM: OMAP: USB: Add phy binding information
Lan Tianyu (12):
usb: Add driver/usb/core/(port.c,hub.h) files
usb: fix compilation error and warning of driver/usb/core/port.c on arm and blackfin
usb: Add "portX/connect_type" attribute to expose usb port's connect type
usb: Create link files between child device and usb port device.
USB: Set usb port's DeviceRemovable according acpi information
usb: Register usb port's acpi power resources
PM/Qos: Expose dev_pm_qos_flags symbol
usb: add runtime pm support for usb port device
usb: add usb port auto power off mechanism
usb: expose usb port's pm qos flags to user space
usb: enable usb port device's async suspend.
Revert "usb: Register usb port's acpi power resources"
Manjunath Goudar (2):
USB: EHCI: make ehci-vt8500 a separate driver
USB: EHCI: make ehci-orion a separate driver
Matt Sealey (1):
USB: ehci-mxc: remove Efika MX-specific CHRGVBUS hack
Michal Nazarewicz (1):
usb: gadget: FunctionFS: Use kstrtoul()
Ming Lei (3):
usb: musb: core: fix failure path
usb: musb: fix dependency on transceiver driver
USB: storage: avoid scanning other targets for single target device
Peter Chen (1):
usb: phy: mxs-phy: add set_suspend API
Pratyush Anand (8):
usb: dwc3: Enable usb2 LPM only when connected as usb2.0
usb: dwc3: gadget: fix missed isoc
usb: dwc3: gadget: correct return from ep_queue
usb: dwc3: gadget: fix isoc END TRANSFER Condition
usb: dwc3: gadget: fix skip LINK_TRB on ISOC
usb: dwc3: gadget: no need to pass params in case of UPDATE_TRANSFER
usb: dwc3: gadget: fix scatter gather implementation
usb: dwc3: gadget: req->queued must be forced to false in cleanup
Praveen Paneri (2):
usb: phy: samsung: Introducing usb phy driver for hsotg
usb: phy: s3c-hsotg: adding phy driver support
Roger Quadros (2):
USB: ehci-omap: Don't free gpios that we didn't request
USB: ehci-omap: Fix autoloading of module
Sachin Kamat (3):
usb: gadget: s3c-hsudc: Use devm_regulator_bulk_get
usb: gadget: s3c-hsotg: Use devm_regulator_bulk_get API
usb: musb: dsps: Remove duplicate inclusion of linux/of.h
Sarah Sharp (6):
USB: Don't use EHCI port sempahore for USB 3.0 hubs.
USB: Prepare for refactoring by adding extra udev checks.
USB: Rip out recursive call on warm port reset.
USB: Fix connected device switch to Inactive state.
USB: Use helper function hub_set_port_link_state
USB: Refactor hub_port_wait_reset.
Sasha Levin (1):
tools/usb: remove unneeded 'continue' and simplify condition
Sebastian Andrzej Siewior (28):
usb: gadget: file_storage: remove its last pieces
usb: gadget: ncm: make global variable ndp*_opts read only
usb: gadget: mass_storage: remove >= 0 check for unsigned type
usb: gadget: consider link speed for bMaxPower
usb/core: consider link speed while looking at bMaxPower
usb/core: update power budget for SuperSpeed
usb: gadget: composite: don't call driver's unbind() if bind() failed
usb: gadget: remove u32 castings of address passed to readl()
usb: gadget: provide a wrapper around SourceSink's setup function
usb: gadget: move source sink's config descriptor out of f_sourcesink
usb: gadget: move loopback's config descriptor out of f_loopback
usb: gadget: add some infracture to register/unregister functions
usb: gadget: convert source sink and loopback to new function interface
usb: gadget: f_acm: remove empty function
usb: gadget: g_serial: split the three possible functions into three bind functions
usb: gadget: u_serial: convert into a module
usb: gadget: composite: add usb_remove_function()
usb: gadget: allocate & giveback serial ports instead hard code them
usb: gadget: f_acm: convert to new function interface with backwards compatibility
usb: gadget: acm_ms: use function framework for ACM
usb: gadget: cdc2: use function framework for ACM
usb: gadget: multi: use function framework for ACM
usb: gadget: add a forward pointer from usb_function to its "instance"
usb: gadget: udc-core: introduce UDC binding by name
usb: gadget: factor out two helper functions from composite_bind()
usb: gadget: export composite's setup & disconnect function
usb: gadget: composite: introduce usb_gstrings_attach()
usb: gadget: f_acm: use usb_gstrings_attach()
Sergei Shtylyov (3):
usb: musb: omap2430: kill redundant assignments in omap2430_probe()
usb: musb: omap2430: fix wrong devm_kzalloc() result check
testusb: remove all mentions of 'usbfs'
Stefan Hubner (1):
usb: serial: keyspan: fixed coding style issues
Tejun Heo (1):
usb: gadget: at91_udc: don't use [delayed_]work_pending()
Vivek Gautam (11):
usb: dwc3: remove dwc3 dependency on host AND gadget.
usb: phy: samsung: Add support to set pmu isolation
ARM: EXYNOS: Update & move usb-phy types to generic include layer
usb: phy: samsung: Add host phy support to samsung-phy driver
USB: ehci-s5p: Add phy driver support
USB: ohci-exynos: Add phy driver support
usb: phy: samsung: Remove __devinit, __devexit_p and __exit annotations
usb: ehci-s5p/ohci-exynos: Fix compatible strings for the device
usb: dwc3: exynos: fix compatible strings for the device
usb: dwc3: exynos/omap: Change platform device IDs for no_op_xceive to AUTO
usb: dwc3: host: Change platform device ID for xhci-hcd to AUTO
Wei Yongjun (1):
usb: gadget: remove unused variable in uac2_pcm_trigger()
Woody Suwalski (1):
USB: UHCI: remove unused definition
fangxiaozhi (1):
USB: storage: properly handle the endian issues of idProduct
supriya karanth (3):
usb: musb: set TXMAXP and AUTOSET for full speed bulk in device mode
usb: musb: set AUTOSET for full speed bulk DMA transfer in host mode
usb: musb: Double buffering issues in host mode TX
Documentation/ABI/testing/sysfs-bus-usb | 9 +
Documentation/devicetree/bindings/usb/dwc3.txt | 22 +
Documentation/devicetree/bindings/usb/omap-usb.txt | 34 +-
.../devicetree/bindings/usb/samsung-usbphy.txt | 55 ++
Documentation/devicetree/bindings/usb/usb-phy.txt | 35 +-
Documentation/devicetree/bindings/usb/usb3503.txt | 20 +
MAINTAINERS | 3 +-
arch/arm/mach-omap2/board-2430sdp.c | 2 +
arch/arm/mach-omap2/board-3430sdp.c | 2 +
arch/arm/mach-omap2/board-4430sdp.c | 2 +
arch/arm/mach-omap2/board-cm-t35.c | 2 +
arch/arm/mach-omap2/board-devkit8000.c | 2 +
arch/arm/mach-omap2/board-igep0020.c | 2 +
arch/arm/mach-omap2/board-ldp.c | 2 +
arch/arm/mach-omap2/board-omap3beagle.c | 2 +
arch/arm/mach-omap2/board-omap3evm.c | 2 +
arch/arm/mach-omap2/board-omap3logic.c | 2 +
arch/arm/mach-omap2/board-omap3pandora.c | 2 +
arch/arm/mach-omap2/board-omap3stalker.c | 2 +
arch/arm/mach-omap2/board-omap3touchbook.c | 2 +
arch/arm/mach-omap2/board-omap4panda.c | 2 +
arch/arm/mach-omap2/board-overo.c | 2 +
arch/arm/mach-omap2/board-rm680.c | 2 +
arch/arm/mach-omap2/board-zoom-peripherals.c | 2 +
arch/arm/mach-omap2/devices.c | 45 +
arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 13 -
arch/arm/mach-omap2/usb-musb.c | 3 +
drivers/base/power/qos.c | 1 +
drivers/usb/c67x00/c67x00-ll-hpi.c | 2 +-
drivers/usb/chipidea/ci13xxx_imx.h | 2 +-
drivers/usb/chipidea/core.c | 2 +-
drivers/usb/core/Makefile | 1 +
drivers/usb/core/devices.c | 13 +-
drivers/usb/core/devio.c | 3 +-
drivers/usb/core/generic.c | 2 +-
drivers/usb/core/hcd.c | 5 +-
drivers/usb/core/hub.c | 616 ++++++++------
drivers/usb/core/hub.h | 122 +++
drivers/usb/core/message.c | 2 +-
drivers/usb/core/port.c | 202 +++++
drivers/usb/core/sysfs.c | 31 +-
drivers/usb/core/usb.h | 12 +
drivers/usb/dwc3/Kconfig | 31 +-
drivers/usb/dwc3/Makefile | 10 +-
drivers/usb/dwc3/core.c | 31 +-
drivers/usb/dwc3/core.h | 24 +-
drivers/usb/dwc3/debugfs.c | 38 +-
drivers/usb/dwc3/dwc3-exynos.c | 57 +-
drivers/usb/dwc3/dwc3-omap.c | 152 ++--
drivers/usb/dwc3/gadget.c | 292 ++++---
drivers/usb/dwc3/host.c | 2 +-
drivers/usb/gadget/Kconfig | 24 +-
drivers/usb/gadget/Makefile | 8 +-
drivers/usb/gadget/acm_ms.c | 42 +-
drivers/usb/gadget/amd5536udc.c | 59 +-
drivers/usb/gadget/amd5536udc.h | 2 +
drivers/usb/gadget/at91_udc.c | 5 +-
drivers/usb/gadget/cdc2.c | 36 +-
drivers/usb/gadget/composite.c | 326 ++++++--
drivers/usb/gadget/dbgp.c | 14 +-
drivers/usb/gadget/f_acm.c | 153 ++--
drivers/usb/gadget/f_fs.c | 5 +-
drivers/usb/gadget/f_loopback.c | 103 +--
drivers/usb/gadget/f_mass_storage.c | 37 +-
drivers/usb/gadget/f_ncm.c | 18 +-
drivers/usb/gadget/f_obex.c | 4 -
drivers/usb/gadget/f_serial.c | 4 -
drivers/usb/gadget/f_sourcesink.c | 200 +++--
drivers/usb/gadget/f_uac2.c | 9 +-
drivers/usb/gadget/f_uvc.c | 3 +-
drivers/usb/gadget/fsl_qe_udc.c | 2 +-
drivers/usb/gadget/fsl_udc_core.c | 60 +-
drivers/usb/gadget/functions.c | 116 +++
drivers/usb/gadget/fusb300_udc.c | 67 +-
drivers/usb/gadget/fusb300_udc.h | 2 +
drivers/usb/gadget/g_zero.h | 35 +-
drivers/usb/gadget/gmidi.c | 2 +-
drivers/usb/gadget/goku_udc.c | 70 +-
drivers/usb/gadget/goku_udc.h | 1 +
drivers/usb/gadget/m66592-udc.c | 72 +-
drivers/usb/gadget/m66592-udc.h | 1 +
drivers/usb/gadget/multi.c | 71 +-
drivers/usb/gadget/mv_udc_core.c | 246 +++---
drivers/usb/gadget/net2280.c | 15 +
drivers/usb/gadget/nokia.c | 43 +-
drivers/usb/gadget/omap_udc.c | 51 +-
drivers/usb/gadget/pch_udc.c | 67 +-
drivers/usb/gadget/pxa25x_udc.c | 62 +-
drivers/usb/gadget/pxa25x_udc.h | 1 +
drivers/usb/gadget/pxa27x_udc.c | 61 +-
drivers/usb/gadget/pxa27x_udc.h | 1 +
drivers/usb/gadget/r8a66597-udc.c | 2 +-
drivers/usb/gadget/s3c-hsotg.c | 44 +-
drivers/usb/gadget/s3c-hsudc.c | 13 +-
drivers/usb/gadget/s3c2410_udc.c | 65 +-
drivers/usb/gadget/s3c2410_udc.h | 1 +
drivers/usb/gadget/serial.c | 118 ++-
drivers/usb/gadget/storage_common.c | 61 --
drivers/usb/gadget/u_serial.c | 313 +++----
drivers/usb/gadget/u_serial.h | 13 +-
drivers/usb/gadget/udc-core.c | 157 ++--
drivers/usb/gadget/webcam.c | 2 +-
drivers/usb/gadget/zero.c | 233 ++++--
drivers/usb/host/Kconfig | 2 +-
drivers/usb/host/ehci-mv.c | 1 -
drivers/usb/host/ehci-mxc.c | 20 -
drivers/usb/host/ehci-omap.c | 10 +-
drivers/usb/host/ehci-s5p.c | 83 +-
drivers/usb/host/isp1760-hcd.c | 4 +-
drivers/usb/host/ohci-exynos.c | 87 +-
drivers/usb/host/ohci-q.c | 1 +
drivers/usb/host/uhci-debug.c | 178 ++--
drivers/usb/host/uhci-hcd.c | 31 +-
drivers/usb/host/uhci-hcd.h | 4 -
drivers/usb/host/uhci-hub.c | 4 +-
drivers/usb/host/uhci-q.c | 2 +-
drivers/usb/host/xhci-ring.c | 2 -
drivers/usb/misc/Kconfig | 6 +
drivers/usb/misc/Makefile | 1 +
drivers/usb/misc/usb3503.c | 325 +++++++
drivers/usb/misc/usbtest.c | 13 +-
drivers/usb/musb/Kconfig | 2 +
drivers/usb/musb/am35x.c | 2 +-
drivers/usb/musb/blackfin.c | 2 +-
drivers/usb/musb/da8xx.c | 7 +-
drivers/usb/musb/davinci.c | 7 +-
drivers/usb/musb/musb_core.c | 1 +
drivers/usb/musb/musb_dsps.c | 3 +-
drivers/usb/musb/musb_gadget.c | 22 +-
drivers/usb/musb/musb_host.c | 44 +-
drivers/usb/musb/omap2430.c | 91 +-
drivers/usb/musb/omap2430.h | 9 -
drivers/usb/musb/tusb6010.c | 2 +-
drivers/usb/musb/ux500.c | 12 +-
drivers/usb/otg/mv_otg.c | 84 +-
drivers/usb/otg/mxs-phy.c | 20 +
drivers/usb/otg/otg.c | 235 +++++-
drivers/usb/otg/twl4030-usb.c | 3 +-
drivers/usb/phy/Kconfig | 28 +
drivers/usb/phy/Makefile | 3 +
drivers/usb/phy/omap-control-usb.c | 295 +++++++
drivers/usb/phy/omap-usb2.c | 72 +-
drivers/usb/phy/omap-usb3.c | 355 ++++++++
drivers/usb/phy/samsung-usbphy.c | 930 +++++++++++++++++++++
drivers/usb/renesas_usbhs/Kconfig | 2 +-
drivers/usb/renesas_usbhs/mod_gadget.c | 2 +-
drivers/usb/serial/Kconfig | 12 +
drivers/usb/serial/Makefile | 1 +
drivers/usb/serial/ftdi_sio.c | 20 +-
drivers/usb/serial/io_ti.c | 89 +-
drivers/usb/serial/keyspan.c | 4 +-
drivers/usb/serial/mct_u232.c | 22 +-
drivers/usb/serial/option.c | 16 +-
drivers/usb/serial/quatech2.c | 18 +-
drivers/usb/serial/sierra.c | 8 +-
drivers/usb/serial/ssu100.c | 19 +-
drivers/usb/serial/usb-serial.c | 28 +-
drivers/usb/serial/usb_wwan.c | 8 +-
drivers/usb/serial/xsens_mt.c | 86 ++
drivers/usb/storage/initializers.c | 4 +-
drivers/usb/storage/uas.c | 124 ++-
drivers/usb/storage/unusual_cypress.h | 2 +-
drivers/usb/storage/usb.c | 3 +
drivers/usb/wusbcore/wa-xfer.c | 6 +-
include/linux/platform_data/samsung-usbphy.h | 27 +
include/linux/platform_data/usb3503.h | 19 +
include/linux/usb/composite.h | 75 +-
include/linux/usb/dwc3-omap.h | 30 +
include/linux/usb/gadget.h | 13 +-
include/linux/usb/musb.h | 2 +
include/linux/usb/omap_control_usb.h | 92 ++
include/linux/usb/omap_usb.h | 27 +-
include/linux/usb/phy.h | 43 +
include/linux/usb/samsung_usb_phy.h | 16 +
tools/usb/testusb.c | 31 +-
175 files changed, 6383 insertions(+), 2515 deletions(-)
create mode 100644 Documentation/devicetree/bindings/usb/dwc3.txt
create mode 100644 Documentation/devicetree/bindings/usb/samsung-usbphy.txt
create mode 100644 Documentation/devicetree/bindings/usb/usb3503.txt
create mode 100644 drivers/usb/core/hub.h
create mode 100644 drivers/usb/core/port.c
create mode 100644 drivers/usb/gadget/functions.c
create mode 100644 drivers/usb/misc/usb3503.c
create mode 100644 drivers/usb/phy/omap-control-usb.c
create mode 100644 drivers/usb/phy/omap-usb3.c
create mode 100644 drivers/usb/phy/samsung-usbphy.c
create mode 100644 drivers/usb/serial/xsens_mt.c
create mode 100644 include/linux/platform_data/samsung-usbphy.h
create mode 100644 include/linux/platform_data/usb3503.h
create mode 100644 include/linux/usb/dwc3-omap.h
create mode 100644 include/linux/usb/omap_control_usb.h
create mode 100644 include/linux/usb/samsung_usb_phy.h
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists