| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAFp+6iHaP96F0OF9_C1DTsfmkPNZMVC78tj7m0YGdV=d_znWrA@mail.gmail.com>
Date: Mon, 25 Feb 2013 14:21:46 +0530
From: Vivek Gautam <gautamvivek1987@...il.com>
To: balbi@...com
Cc: Vivek Gautam <gautam.vivek@...sung.com>, linux-usb@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-omap@...r.kernel.org,
gregkh@...uxfoundation.org, kishon@...com
Subject: Re: [PATCH RFC] usb: dwc3: Set GCTL.PrtCapDir based on selected mode.
Hi Balbi,
On Mon, Feb 25, 2013 at 1:47 PM, Felipe Balbi <balbi@...com> wrote:
> Hi,
>
> On Tue, Feb 05, 2013 at 07:15:58PM +0530, Vivek Gautam wrote:
>> Now that machines may select the mode of working of DWC3,
>> we can set the Port capability direction based on selected mode.
>>
>> Signed-off-by: Vivek Gautam <gautam.vivek@...sung.com>
>> ---
>> drivers/usb/dwc3/core.c | 11 ++++++++---
>> 1 files changed, 8 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
>> index 177f4c6..f4c47f7 100644
>> --- a/drivers/usb/dwc3/core.c
>> +++ b/drivers/usb/dwc3/core.c
>> @@ -479,7 +479,6 @@ static int dwc3_probe(struct platform_device *pdev)
>>
>> switch (mode) {
>> case DWC3_MODE_DEVICE:
>> - dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_DEVICE);
>> ret = dwc3_gadget_init(dwc);
>> if (ret) {
>> dev_err(dev, "failed to initialize gadget\n");
>> @@ -487,7 +486,6 @@ static int dwc3_probe(struct platform_device *pdev)
>> }
>> break;
>> case DWC3_MODE_HOST:
>> - dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_HOST);
>> ret = dwc3_host_init(dwc);
>> if (ret) {
>> dev_err(dev, "failed to initialize host\n");
>> @@ -495,7 +493,6 @@ static int dwc3_probe(struct platform_device *pdev)
>> }
>> break;
>> case DWC3_MODE_DRD:
>> - dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_OTG);
>> ret = dwc3_host_init(dwc);
>> if (ret) {
>> dev_err(dev, "failed to initialize host\n");
>> @@ -514,6 +511,14 @@ static int dwc3_probe(struct platform_device *pdev)
>> }
>> dwc->mode = mode;
>>
>> +#if IS_ENABLED(CONFIG_USB_DWC3_HOST)
>> + dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_HOST);
>> +#elif IS_ENABLED(CONFIG_USB_DWC3_GADGET)
>> + dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_DEVICE);
>> +#else
>> + dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_OTG);
>> +#endif
>
> you can actually use:
>
> if (IS_ENABLED(CONFIG_USB_DWC3_HOST))
> dwc3_set_mode(dwc...
> else if (IS_ENABLED( ...
> ...
> else
> ...
>
I am actually hoping to change this to something like below (after
of course changing the preprocessor conditionals) :
commit 9a62ed948dcb6ac5d78aff41f5355c0a5ea86475
Author: Vivek Gautam <gautam.vivek@...sung.com>
Date: Thu Jan 24 11:58:05 2013 +0530
usb: dwc3: Set GCTL.PrtCapDir based on selected mode.
Now that machines may select the mode of working of DWC3,
we can set the Port capability direction based on selected mode.
Signed-off-by: Vivek Gautam <gautam.vivek@...sung.com>
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 79f335f..9444fbe 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -478,7 +478,13 @@ static int dwc3_probe(struct platform_device *pdev)
goto err1;
}
- mode = DWC3_MODE(dwc->hwparams.hwparams0);
+#if IS_ENABLED(CONFIG_USB_DWC3_HOST)
+ mode = DWC3_MODE_HOST;
+#elif IS_ENABLED(CONFIG_USB_DWC3_GADGET)
+ mode = DWC3_MODE_DEVICE;
+#else
+ mode = DWC3_MODE_DRD;
+#endif
switch (mode) {
case DWC3_MODE_DEVICE:
Since the mode is now software dependent, we can skip
initializing gadget/host in case of Host-only/Gadget-only modes respectively.
Can't guess how much this is valid though :-(
> instead of pre-processor conditionals. In fact, I have recently written
> a patch converting #if IS_ENABLED() to if (IS_ENABLED()) but I haven't
> posted yet:
>
Right, very valid change. Missed this in earlier change :-(
> commit 42dbbbc272bc941ec2b0cac51342609e61e13a01
> Author: Felipe Balbi <balbi@...com>
> Date: Fri Feb 22 16:24:49 2013 +0200
>
> usb: dwc3: debugfs: improve debugfs file creation
>
> when commit 388e5c5 (usb: dwc3: remove dwc3
> dependency on host AND gadget.) changed the
> way debugfs files are created, it failed to
> note that 'mode' is necessary in Dual Role
> mode only while 'testmode' and 'link_state'
> are valid in Dual Role and Peripheral-only
> builds. Fix this while also converting pre-
> processor conditional to C conditionals.
>
> Signed-off-by: Felipe Balbi <balbi@...com>
>
> diff --git a/drivers/usb/dwc3/debugfs.c b/drivers/usb/dwc3/debugfs.c
> index a1bac9a..8b23d045 100644
> --- a/drivers/usb/dwc3/debugfs.c
> +++ b/drivers/usb/dwc3/debugfs.c
> @@ -667,28 +667,31 @@ int dwc3_debugfs_init(struct dwc3 *dwc)
> goto err1;
> }
>
> -#if IS_ENABLED(CONFIG_USB_DWC3_GADGET)
> - file = debugfs_create_file("mode", S_IRUGO | S_IWUSR, root,
> - dwc, &dwc3_mode_fops);
> - if (!file) {
> - ret = -ENOMEM;
> - goto err1;
> + if (IS_ENABLED(CONFIG_USB_DWC3_DUAL_ROLE)) {
> + file = debugfs_create_file("mode", S_IRUGO | S_IWUSR, root,
> + dwc, &dwc3_mode_fops);
> + if (!file) {
> + ret = -ENOMEM;
> + goto err1;
> + }
> }
>
> - file = debugfs_create_file("testmode", S_IRUGO | S_IWUSR, root,
> - dwc, &dwc3_testmode_fops);
> - if (!file) {
> - ret = -ENOMEM;
> - goto err1;
> - }
> -
> - file = debugfs_create_file("link_state", S_IRUGO | S_IWUSR, root,
> - dwc, &dwc3_link_state_fops);
> - if (!file) {
> - ret = -ENOMEM;
> - goto err1;
> + if (IS_ENABLED(CONFIG_USB_DWC3_DUAL_ROLE) ||
> + IS_ENABLED(CONFIG_USB_DWC3_GADGET)) {
> + file = debugfs_create_file("testmode", S_IRUGO | S_IWUSR, root,
> + dwc, &dwc3_testmode_fops);
> + if (!file) {
> + ret = -ENOMEM;
> + goto err1;
> + }
> +
> + file = debugfs_create_file("link_state", S_IRUGO | S_IWUSR, root,
> + dwc, &dwc3_link_state_fops);
> + if (!file) {
> + ret = -ENOMEM;
> + goto err1;
> + }
> }
> -#endif
>
> return 0;
>
>
> --
> balbi
--
Thanks & Regards
Vivek
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists