[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1361903020-18526-10-git-send-email-linux@roeck-us.net>
Date: Tue, 26 Feb 2013 10:23:37 -0800
From: Guenter Roeck <linux@...ck-us.net>
To: Jean Delvare <khali@...ux-fr.org>
Cc: lm-sensors@...sensors.org, linux-kernel@...r.kernel.org,
Guenter Roeck <linux@...ck-us.net>
Subject: [PATCH v5 09/12] hwmon: (nct6775) Add support for automatic fan control
Signed-off-by: Guenter Roeck <linux@...ck-us.net>
---
Documentation/hwmon/nct6775 | 69 +++
drivers/hwmon/nct6775.c | 1099 ++++++++++++++++++++++++++++++++++++++++++-
2 files changed, 1161 insertions(+), 7 deletions(-)
diff --git a/Documentation/hwmon/nct6775 b/Documentation/hwmon/nct6775
index 7c9f1d3..b4fe6bc 100644
--- a/Documentation/hwmon/nct6775
+++ b/Documentation/hwmon/nct6775
@@ -87,6 +87,75 @@ pwm[1-5]_mode - controls if output is PWM or DC level
* 0 DC output
* 1 PWM output
+Common fan control attributes
+-----------------------------
+
+pwm[1-5]_temp_sel Temperature source. Value is temperature sensor index.
+ For example, select '1' for temp1_input.
+
+Thermal Cruise mode (2)
+-----------------------
+
+If the temperature is in the range defined by:
+
+pwm[1-5]_target_temp Target temperature, unit millidegree Celsius
+ (range 0 - 127000)
+pwm[1-5]_temp_tolerance
+ Target temperature tolerance, unit millidegree Celsius
+
+there are no changes to fan speed. Once the temperature leaves the interval, fan
+speed increases (if temperature is higher that desired) or decreases (if
+temperature is lower than desired), using the following limits and time
+intervals.
+
+pwm[1-5]_start fan pwm start value (range 1 - 255), to start fan
+ when the temperature is above defined range.
+pwm[1-5]_floor lowest fan pwm (range 0 - 255) if temperature is below
+ the defined range. If set to 0, the fan is expected to
+ stop if the temperature is below the defined range.
+pwm[1-5]_step_up_time milliseconds before fan speed is increased
+pwm[1-5]_step_down_time milliseconds before fan speed is decreased
+pwm[1-5]_stop_time how many milliseconds must elapse to switch
+ corresponding fan off (when the temperature was below
+ defined range).
+
+Speed Cruise mode (3)
+---------------------
+
+This modes tries to keep the fan speed constant.
+
+fan[1-5]_target Target fan speed
+fan[1-5]_tolerance
+ Target speed tolerance
+
+
+Untested; use at your own risk.
+
+Smart Fan IV mode (5)
+---------------------
+
+This mode offers multiple slopes to control the fan speed. The slopes can be
+controlled by setting the pwm and temperature attributes. When the temperature
+rises, the chip will calculate the DC/PWM output based on the current slope.
+There are up to seven data points depending on the chip type. Subsequent data
+points should be set to higher temperatures and higher pwm values to achieve
+higher fan speeds with increasing temperature. The last data point reflects
+critical temperature mode, in which the fans should run at full speed.
+
+pwm[1-5]_auto_point[1-7]_pwm
+ pwm value to be set if temperature reaches matching
+ temperature range.
+pwm[1-5]_auto_point[1-7]_temp
+ Temperature over which the matching pwm is enabled.
+pwm[1-5]_temp_tolerance
+ Temperature tolerance, unit millidegree Celsius
+pwm[1-5]_crit_temp_tolerance
+ Temperature tolerance for critical temperature,
+ unit millidegree Celsius
+
+pwm[1-5]_step_up_time milliseconds before fan speed is increased
+pwm[1-5]_step_down_time milliseconds before fan speed is decreased
+
Usage Notes
-----------
diff --git a/drivers/hwmon/nct6775.c b/drivers/hwmon/nct6775.c
index 2df74b8..bf47bcb 100644
--- a/drivers/hwmon/nct6775.c
+++ b/drivers/hwmon/nct6775.c
@@ -215,8 +215,23 @@ static const u8 NCT6775_CR_CASEOPEN_CLR_MASK[] = { 0x20, 0x01 };
static const u8 NCT6775_REG_PWM_MODE[] = { 0x04, 0x04, 0x12 };
static const u8 NCT6775_PWM_MODE_MASK[] = { 0x01, 0x02, 0x01 };
-static const u16 NCT6775_REG_FAN_MODE[] = { 0x102, 0x202, 0x302, 0x802, 0x902 };
+/* Advanced Fan control, some values are common for all fans */
+static const u16 NCT6775_REG_TARGET[] = { 0x101, 0x201, 0x301, 0x801, 0x901 };
+static const u16 NCT6775_REG_FAN_MODE[] = { 0x102, 0x202, 0x302, 0x802, 0x902 };
+static const u16 NCT6775_REG_FAN_STEP_DOWN_TIME[] = {
+ 0x103, 0x203, 0x303, 0x803, 0x903 };
+static const u16 NCT6775_REG_FAN_STEP_UP_TIME[] = {
+ 0x104, 0x204, 0x304, 0x804, 0x904 };
+static const u16 NCT6775_REG_FAN_STOP_OUTPUT[] = {
+ 0x105, 0x205, 0x305, 0x805, 0x905 };
+static const u16 NCT6775_REG_FAN_START_OUTPUT[]
+ = { 0x106, 0x206, 0x306, 0x806, 0x906 };
+static const u16 NCT6775_REG_FAN_MAX_OUTPUT[] = { 0x10a, 0x20a, 0x30a };
+static const u16 NCT6775_REG_FAN_STEP_OUTPUT[] = { 0x10b, 0x20b, 0x30b };
+
+static const u16 NCT6775_REG_FAN_STOP_TIME[] = {
+ 0x107, 0x207, 0x307, 0x807, 0x907 };
static const u16 NCT6775_REG_PWM[] = { 0x109, 0x209, 0x309, 0x809, 0x909 };
static const u16 NCT6775_REG_PWM_READ[] = { 0x01, 0x03, 0x11, 0x13, 0x15 };
@@ -237,8 +252,26 @@ static const u16 NCT6775_REG_TEMP_OVER[] = {
static const u16 NCT6775_REG_TEMP_SOURCE[] = {
0x621, 0x622, 0x623, 0x624, 0x625, 0x626 };
+static const u16 NCT6775_REG_TEMP_SEL[] = {
+ 0x100, 0x200, 0x300, 0x800, 0x900 };
+
static const u16 NCT6775_REG_TEMP_OFFSET[] = { 0x454, 0x455, 0x456 };
+static const u16 NCT6775_REG_AUTO_TEMP[] = {
+ 0x121, 0x221, 0x321, 0x821, 0x921 };
+static const u16 NCT6775_REG_AUTO_PWM[] = {
+ 0x127, 0x227, 0x327, 0x827, 0x927 };
+
+#define NCT6775_AUTO_TEMP(data, nr, p) ((data)->REG_AUTO_TEMP[nr] + (p))
+#define NCT6775_AUTO_PWM(data, nr, p) ((data)->REG_AUTO_PWM[nr] + (p))
+
+static const u16 NCT6775_REG_CRITICAL_ENAB[] = { 0x134, 0x234, 0x334 };
+
+static const u16 NCT6775_REG_CRITICAL_TEMP[] = {
+ 0x135, 0x235, 0x335, 0x835, 0x935 };
+static const u16 NCT6775_REG_CRITICAL_TEMP_TOLERANCE[] = {
+ 0x138, 0x238, 0x338, 0x838, 0x938 };
+
static const char *const nct6775_temp_label[] = {
"",
"SYSTIN",
@@ -281,6 +314,9 @@ static const s8 NCT6776_ALARM_BITS[] = {
4, 5, 13, -1, -1, -1, /* temp1..temp6 */
12, 9 }; /* intrusion0, intrusion1 */
+static const u16 NCT6776_REG_TOLERANCE_H[] = {
+ 0x10c, 0x20c, 0x30c, 0x80c, 0x90c };
+
static const u8 NCT6776_REG_PWM_MODE[] = { 0x04, 0, 0 };
static const u8 NCT6776_PWM_MODE_MASK[] = { 0x01, 0, 0 };
@@ -344,6 +380,11 @@ static const u16 NCT6779_REG_FAN[] = { 0x4b0, 0x4b2, 0x4b4, 0x4b6, 0x4b8 };
static const u16 NCT6779_REG_FAN_PULSES[] = {
0x644, 0x645, 0x646, 0x647, 0x648 };
+static const u16 NCT6779_REG_CRITICAL_PWM_ENABLE[] = {
+ 0x136, 0x236, 0x336, 0x836, 0x936 };
+static const u16 NCT6779_REG_CRITICAL_PWM[] = {
+ 0x137, 0x237, 0x337, 0x837, 0x937 };
+
static const u16 NCT6779_REG_TEMP[] = { 0x27, 0x150 };
static const u16 NCT6779_REG_TEMP_HYST[] = { 0x3a, 0x153, 0, 0, 0, 0 };
static const u16 NCT6779_REG_TEMP_OVER[] = { 0x39, 0x155, 0, 0, 0, 0 };
@@ -409,6 +450,18 @@ static int pwm_enable_to_reg(enum pwm_enable mode)
* Conversions
*/
+/* 1 is DC mode, output in ms */
+static unsigned int step_time_from_reg(u8 reg, u8 mode)
+{
+ return mode ? 400 * reg : 100 * reg;
+}
+
+static u8 step_time_to_reg(unsigned int msec, u8 mode)
+{
+ return clamp_val((mode ? (msec + 200) / 400 :
+ (msec + 50) / 100), 1, 255);
+}
+
static unsigned int fan_from_reg8(u16 reg, unsigned int divreg)
{
if (reg == 0 || reg == 255)
@@ -441,6 +494,14 @@ static unsigned int fan_from_reg16(u16 reg, unsigned int divreg)
return 1350000U / (reg << divreg);
}
+static u16 fan_to_reg(u32 fan, unsigned int divreg)
+{
+ if (!fan)
+ return 0;
+
+ return (1350000U / fan) >> divreg;
+}
+
static inline unsigned int
div_from_reg(u8 reg)
{
@@ -495,18 +556,31 @@ struct nct6775_data {
const u16 *REG_VIN;
const u16 *REG_IN_MINMAX[2];
+ const u16 *REG_TARGET;
const u16 *REG_FAN;
const u16 *REG_FAN_MODE;
const u16 *REG_FAN_MIN;
const u16 *REG_FAN_PULSES;
+ const u16 *REG_FAN_TIME[3];
+
+ const u16 *REG_TOLERANCE_H;
const u8 *REG_PWM_MODE;
const u8 *PWM_MODE_MASK;
- const u16 *REG_PWM[1]; /* [0]=pwm */
+ const u16 *REG_PWM[5]; /* [0]=pwm, [1]=pwm_start, [2]=pwm_floor,
+ * [3]=pwm_max, [4]=pwm_step
+ */
const u16 *REG_PWM_READ;
+ const u16 *REG_AUTO_TEMP;
+ const u16 *REG_AUTO_PWM;
+
+ const u16 *REG_CRITICAL_TEMP;
+ const u16 *REG_CRITICAL_TEMP_TOLERANCE;
+
const u16 *REG_TEMP_SOURCE; /* temp register sources */
+ const u16 *REG_TEMP_SEL;
const u16 *REG_TEMP_OFFSET;
const u16 *REG_ALARM;
@@ -548,7 +622,26 @@ struct nct6775_data {
* 4->SmartFan III
* 5->enhanced variable thermal cruise (SmartFan IV)
*/
- u8 pwm[1][5]; /* [0]=pwm */
+ u8 pwm[5][5]; /* [0]=pwm, [1]=pwm_start, [2]=pwm_floor,
+ * [3]=pwm_max, [4]=pwm_step
+ */
+
+ u8 target_temp[5];
+ u8 target_temp_mask;
+ u32 target_speed[5];
+ u32 target_speed_tolerance[5];
+ u8 speed_tolerance_limit;
+
+ u8 temp_tolerance[2][5];
+ u8 tolerance_mask;
+
+ u8 fan_time[3][5]; /* 0 = stop_time, 1 = step_up, 2 = step_down */
+
+ /* Automatic fan speed control registers */
+ int auto_pwm_num;
+ u8 auto_pwm[5][7];
+ u8 auto_temp[5][7];
+ u8 pwm_temp_sel[5];
u8 vid;
u8 vrm;
@@ -830,7 +923,7 @@ static void nct6775_update_pwm(struct device *dev)
{
struct nct6775_data *data = dev_get_drvdata(dev);
int i, j;
- int fanmodecfg;
+ int fanmodecfg, reg;
bool duty_is_dc;
for (i = 0; i < data->pwm_num; i++) {
@@ -853,6 +946,96 @@ static void nct6775_update_pwm(struct device *dev)
data->pwm_enable[i] = reg_to_pwm_enable(data->pwm[0][i],
(fanmodecfg >> 4) & 7);
+
+ if (!data->temp_tolerance[0][i] ||
+ data->pwm_enable[i] != speed_cruise)
+ data->temp_tolerance[0][i] = fanmodecfg & 0x0f;
+ if (!data->target_speed_tolerance[i] ||
+ data->pwm_enable[i] == speed_cruise) {
+ u8 t = fanmodecfg & 0x0f;
+ if (data->REG_TOLERANCE_H) {
+ t |= (nct6775_read_value(data,
+ data->REG_TOLERANCE_H[i]) & 0x70) >> 1;
+ }
+ data->target_speed_tolerance[i] = t;
+ }
+
+ data->temp_tolerance[1][i] =
+ nct6775_read_value(data,
+ data->REG_CRITICAL_TEMP_TOLERANCE[i]);
+
+ reg = nct6775_read_value(data, data->REG_TEMP_SEL[i]);
+ data->pwm_temp_sel[i] = reg & 0x1f;
+ /* If fan can stop, report floor as 0 */
+ if (reg & 0x80)
+ data->pwm[2][i] = 0;
+ }
+}
+
+static void nct6775_update_pwm_limits(struct device *dev)
+{
+ struct nct6775_data *data = dev_get_drvdata(dev);
+ int i, j;
+ u8 reg;
+ u16 reg_t;
+
+ for (i = 0; i < data->pwm_num; i++) {
+ if (!(data->has_pwm & (1 << i)))
+ continue;
+
+ for (j = 0; j < 3; j++) {
+ data->fan_time[j][i] =
+ nct6775_read_value(data, data->REG_FAN_TIME[j][i]);
+ }
+
+ reg_t = nct6775_read_value(data, data->REG_TARGET[i]);
+ /* Update only in matching mode or if never updated */
+ if (!data->target_temp[i] ||
+ data->pwm_enable[i] == thermal_cruise)
+ data->target_temp[i] = reg_t & data->target_temp_mask;
+ if (!data->target_speed[i] ||
+ data->pwm_enable[i] == speed_cruise) {
+ if (data->REG_TOLERANCE_H) {
+ reg_t |= (nct6775_read_value(data,
+ data->REG_TOLERANCE_H[i]) & 0x0f) << 8;
+ }
+ data->target_speed[i] = reg_t;
+ }
+
+ for (j = 0; j < data->auto_pwm_num; j++) {
+ data->auto_pwm[i][j] =
+ nct6775_read_value(data,
+ NCT6775_AUTO_PWM(data, i, j));
+ data->auto_temp[i][j] =
+ nct6775_read_value(data,
+ NCT6775_AUTO_TEMP(data, i, j));
+ }
+
+ /* critical auto_pwm temperature data */
+ data->auto_temp[i][data->auto_pwm_num] =
+ nct6775_read_value(data, data->REG_CRITICAL_TEMP[i]);
+
+ switch (data->kind) {
+ case nct6775:
+ reg = nct6775_read_value(data,
+ NCT6775_REG_CRITICAL_ENAB[i]);
+ data->auto_pwm[i][data->auto_pwm_num] =
+ (reg & 0x02) ? 0xff : 0x00;
+ break;
+ case nct6776:
+ data->auto_pwm[i][data->auto_pwm_num] = 0xff;
+ break;
+ case nct6779:
+ reg = nct6775_read_value(data,
+ NCT6779_REG_CRITICAL_PWM_ENABLE[i]);
+ if (reg & 1)
+ data->auto_pwm[i][data->auto_pwm_num] =
+ nct6775_read_value(data,
+ NCT6779_REG_CRITICAL_PWM[i]);
+ else
+ data->auto_pwm[i][data->auto_pwm_num] = 0xff;
+ break;
+ }
}
}
@@ -902,6 +1085,7 @@ static struct nct6775_data *nct6775_update_device(struct device *dev)
}
nct6775_update_pwm(dev);
+ nct6775_update_pwm_limits(dev);
/* Measured temperatures and limits */
for (i = 0; i < NUM_TEMP; i++) {
@@ -1751,20 +1935,91 @@ store_pwm(struct device *dev, struct device_attribute *attr, const char *buf,
int nr = sattr->nr;
int index = sattr->index;
unsigned long val;
+ int minval[5] = { 0, 1, 1, data->pwm[2][nr], 0 };
+ int maxval[5]
+ = { 255, 255, data->pwm[3][nr] ? : 255, 255, 255 };
int err;
+ u8 reg;
err = kstrtoul(buf, 10, &val);
if (err < 0)
return err;
- val = clamp_val(val, 0, 255);
+ val = clamp_val(val, minval[index], maxval[index]);
mutex_lock(&data->update_lock);
data->pwm[index][nr] = val;
nct6775_write_value(data, data->REG_PWM[index][nr], val);
+ if (index == 2) { /* floor: disable if val == 0 */
+ reg = nct6775_read_value(data, data->REG_TEMP_SEL[nr]);
+ reg &= 0x7f;
+ if (val)
+ reg |= 0x80;
+ nct6775_write_value(data, data->REG_TEMP_SEL[nr], reg);
+ }
mutex_unlock(&data->update_lock);
return count;
}
+/* Returns 0 if OK, -EINVAL otherwise */
+static int check_trip_points(struct nct6775_data *data, int nr)
+{
+ int i;
+
+ for (i = 0; i < data->auto_pwm_num - 1; i++) {
+ if (data->auto_temp[nr][i] > data->auto_temp[nr][i + 1])
+ return -EINVAL;
+ }
+ for (i = 0; i < data->auto_pwm_num - 1; i++) {
+ if (data->auto_pwm[nr][i] > data->auto_pwm[nr][i + 1])
+ return -EINVAL;
+ }
+ /* validate critical temperature and pwm if enabled (pwm > 0) */
+ if (data->auto_pwm[nr][data->auto_pwm_num]) {
+ if (data->auto_temp[nr][data->auto_pwm_num - 1] >
+ data->auto_temp[nr][data->auto_pwm_num] ||
+ data->auto_pwm[nr][data->auto_pwm_num - 1] >
+ data->auto_pwm[nr][data->auto_pwm_num])
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static void pwm_update_registers(struct nct6775_data *data, int nr)
+{
+ u8 reg;
+
+ switch (data->pwm_enable[nr]) {
+ case off:
+ case manual:
+ break;
+ case speed_cruise:
+ reg = nct6775_read_value(data, data->REG_FAN_MODE[nr]);
+ reg = (reg & ~data->tolerance_mask) |
+ (data->target_speed_tolerance[nr] & data->tolerance_mask);
+ nct6775_write_value(data, data->REG_FAN_MODE[nr], reg);
+ nct6775_write_value(data, data->REG_TARGET[nr],
+ data->target_speed[nr] & 0xff);
+ if (data->REG_TOLERANCE_H) {
+ reg = (data->target_speed[nr] >> 8) & 0x0f;
+ reg |= (data->target_speed_tolerance[nr] & 0x38) << 1;
+ nct6775_write_value(data,
+ data->REG_TOLERANCE_H[nr],
+ reg);
+ }
+ break;
+ case thermal_cruise:
+ nct6775_write_value(data, data->REG_TARGET[nr],
+ data->target_temp[nr]);
+ /* intentional */
+ default:
+ reg = nct6775_read_value(data, data->REG_FAN_MODE[nr]);
+ reg = (reg & ~data->tolerance_mask) |
+ data->temp_tolerance[0][nr];
+ nct6775_write_value(data, data->REG_FAN_MODE[nr], reg);
+ break;
+ }
+}
+
static ssize_t
show_pwm_enable(struct device *dev, struct device_attribute *attr, char *buf)
{
@@ -1795,6 +2050,12 @@ store_pwm_enable(struct device *dev, struct device_attribute *attr,
if (val == sf3 && data->kind != nct6775)
return -EINVAL;
+ if (val == sf4 && check_trip_points(data, nr)) {
+ dev_err(dev, "Inconsistent trip points, not switching to SmartFan IV mode\n");
+ dev_err(dev, "Adjust trip points and try again\n");
+ return -EINVAL;
+ }
+
mutex_lock(&data->update_lock);
data->pwm_enable[nr] = val;
if (val == off) {
@@ -1804,6 +2065,7 @@ store_pwm_enable(struct device *dev, struct device_attribute *attr,
data->pwm[0][nr] = 255;
nct6775_write_value(data, data->REG_PWM[0][nr], 255);
}
+ pwm_update_registers(data, nr);
reg = nct6775_read_value(data, data->REG_FAN_MODE[nr]);
reg &= 0x0f;
reg |= pwm_enable_to_reg(val) << 4;
@@ -1812,6 +2074,235 @@ store_pwm_enable(struct device *dev, struct device_attribute *attr,
return count;
}
+static ssize_t
+show_pwm_temp_sel(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct nct6775_data *data = nct6775_update_device(dev);
+ struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr);
+ int i, src, sel = 0;
+
+ src = data->pwm_temp_sel[sattr->index];
+
+ for (i = 0; i < NUM_TEMP; i++) {
+ if (!(data->have_temp & (1 << i)))
+ continue;
+ if (src == data->temp_src[i]) {
+ sel = i + 1;
+ break;
+ }
+ }
+
+ return sprintf(buf, "%d\n", sel);
+}
+
+static ssize_t
+store_pwm_temp_sel(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct nct6775_data *data = nct6775_update_device(dev);
+ struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr);
+ int nr = sattr->index;
+ unsigned long val;
+ int err, reg, src;
+
+ err = kstrtoul(buf, 10, &val);
+ if (err < 0)
+ return err;
+ if (val == 0 || val > NUM_TEMP)
+ return -EINVAL;
+ if (!(data->have_temp & (1 << (val - 1))) || !data->temp_src[val - 1])
+ return -EINVAL;
+
+ mutex_lock(&data->update_lock);
+ src = data->temp_src[val - 1];
+ data->pwm_temp_sel[nr] = src;
+ reg = nct6775_read_value(data, data->REG_TEMP_SEL[nr]);
+ reg &= 0xe0;
+ reg |= src;
+ nct6775_write_value(data, data->REG_TEMP_SEL[nr], reg);
+ mutex_unlock(&data->update_lock);
+
+ return count;
+}
+
+static ssize_t
+show_target_temp(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct nct6775_data *data = nct6775_update_device(dev);
+ struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr);
+
+ return sprintf(buf, "%d\n", data->target_temp[sattr->index] * 1000);
+}
+
+static ssize_t
+store_target_temp(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct nct6775_data *data = dev_get_drvdata(dev);
+ struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr);
+ int nr = sattr->index;
+ unsigned long val;
+ int err;
+
+ err = kstrtoul(buf, 10, &val);
+ if (err < 0)
+ return err;
+
+ val = clamp_val(DIV_ROUND_CLOSEST(val, 1000), 0,
+ data->target_temp_mask);
+
+ mutex_lock(&data->update_lock);
+ data->target_temp[nr] = val;
+ pwm_update_registers(data, nr);
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+static ssize_t
+show_target_speed(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct nct6775_data *data = nct6775_update_device(dev);
+ struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr);
+ int nr = sattr->index;
+
+ return sprintf(buf, "%d\n",
+ fan_from_reg16(data->target_speed[nr],
+ data->fan_div[nr]));
+}
+
+static ssize_t
+store_target_speed(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct nct6775_data *data = dev_get_drvdata(dev);
+ struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr);
+ int nr = sattr->index;
+ unsigned long val;
+ int err;
+ u16 speed;
+
+ err = kstrtoul(buf, 10, &val);
+ if (err < 0)
+ return err;
+
+ val = clamp_val(val, 0, 1350000U);
+ speed = fan_to_reg(val, data->fan_div[nr]);
+
+ mutex_lock(&data->update_lock);
+ data->target_speed[nr] = speed;
+ pwm_update_registers(data, nr);
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+static ssize_t
+show_temp_tolerance(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct nct6775_data *data = nct6775_update_device(dev);
+ struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+ int nr = sattr->nr;
+ int index = sattr->index;
+
+ return sprintf(buf, "%d\n", data->temp_tolerance[index][nr] * 1000);
+}
+
+static ssize_t
+store_temp_tolerance(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct nct6775_data *data = dev_get_drvdata(dev);
+ struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+ int nr = sattr->nr;
+ int index = sattr->index;
+ unsigned long val;
+ int err;
+
+ err = kstrtoul(buf, 10, &val);
+ if (err < 0)
+ return err;
+
+ /* Limit tolerance as needed */
+ val = clamp_val(DIV_ROUND_CLOSEST(val, 1000), 0, data->tolerance_mask);
+
+ mutex_lock(&data->update_lock);
+ data->temp_tolerance[index][nr] = val;
+ if (index)
+ pwm_update_registers(data, nr);
+ else
+ nct6775_write_value(data,
+ data->REG_CRITICAL_TEMP_TOLERANCE[nr],
+ val);
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+/*
+ * Fan speed tolerance is a tricky beast, since the associated register is
+ * a tick counter, but the value is reported and configured as rpm.
+ * Compute resulting low and high rpm values and report the difference.
+ */
+static ssize_t
+show_speed_tolerance(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct nct6775_data *data = nct6775_update_device(dev);
+ struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr);
+ int nr = sattr->index;
+ int low = data->target_speed[nr] - data->target_speed_tolerance[nr];
+ int high = data->target_speed[nr] + data->target_speed_tolerance[nr];
+ int tolerance;
+
+ if (low <= 0)
+ low = 1;
+ if (high > 0xffff)
+ high = 0xffff;
+ if (high < low)
+ high = low;
+
+ tolerance = (fan_from_reg16(low, data->fan_div[nr])
+ - fan_from_reg16(high, data->fan_div[nr])) / 2;
+
+ return sprintf(buf, "%d\n", tolerance);
+}
+
+static ssize_t
+store_speed_tolerance(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct nct6775_data *data = dev_get_drvdata(dev);
+ struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr);
+ int nr = sattr->index;
+ unsigned long val;
+ int err;
+ int low, high;
+
+ err = kstrtoul(buf, 10, &val);
+ if (err < 0)
+ return err;
+
+ high = fan_from_reg16(data->target_speed[nr],
+ data->fan_div[nr]) + val;
+ low = fan_from_reg16(data->target_speed[nr],
+ data->fan_div[nr]) - val;
+ if (low <= 0)
+ low = 1;
+ if (high < low)
+ high = low;
+
+ val = (fan_to_reg(low, data->fan_div[nr]) -
+ fan_to_reg(high, data->fan_div[nr])) / 2;
+
+ /* Limit tolerance as needed */
+ val = clamp_val(val, 0, data->speed_tolerance_limit);
+
+ mutex_lock(&data->update_lock);
+ data->target_speed_tolerance[nr] = val;
+ pwm_update_registers(data, nr);
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
static SENSOR_DEVICE_ATTR_2(pwm1, S_IWUSR | S_IRUGO, show_pwm, store_pwm, 0, 0);
static SENSOR_DEVICE_ATTR_2(pwm2, S_IWUSR | S_IRUGO, show_pwm, store_pwm, 1, 0);
static SENSOR_DEVICE_ATTR_2(pwm3, S_IWUSR | S_IRUGO, show_pwm, store_pwm, 2, 0);
@@ -1840,6 +2331,88 @@ static SENSOR_DEVICE_ATTR(pwm4_enable, S_IWUSR | S_IRUGO, show_pwm_enable,
static SENSOR_DEVICE_ATTR(pwm5_enable, S_IWUSR | S_IRUGO, show_pwm_enable,
store_pwm_enable, 4);
+static SENSOR_DEVICE_ATTR(pwm1_temp_sel, S_IWUSR | S_IRUGO,
+ show_pwm_temp_sel, store_pwm_temp_sel, 0);
+static SENSOR_DEVICE_ATTR(pwm2_temp_sel, S_IWUSR | S_IRUGO,
+ show_pwm_temp_sel, store_pwm_temp_sel, 1);
+static SENSOR_DEVICE_ATTR(pwm3_temp_sel, S_IWUSR | S_IRUGO,
+ show_pwm_temp_sel, store_pwm_temp_sel, 2);
+static SENSOR_DEVICE_ATTR(pwm4_temp_sel, S_IWUSR | S_IRUGO,
+ show_pwm_temp_sel, store_pwm_temp_sel, 3);
+static SENSOR_DEVICE_ATTR(pwm5_temp_sel, S_IWUSR | S_IRUGO,
+ show_pwm_temp_sel, store_pwm_temp_sel, 4);
+
+static SENSOR_DEVICE_ATTR(pwm1_target_temp, S_IWUSR | S_IRUGO, show_target_temp,
+ store_target_temp, 0);
+static SENSOR_DEVICE_ATTR(pwm2_target_temp, S_IWUSR | S_IRUGO, show_target_temp,
+ store_target_temp, 1);
+static SENSOR_DEVICE_ATTR(pwm3_target_temp, S_IWUSR | S_IRUGO, show_target_temp,
+ store_target_temp, 2);
+static SENSOR_DEVICE_ATTR(pwm4_target_temp, S_IWUSR | S_IRUGO, show_target_temp,
+ store_target_temp, 3);
+static SENSOR_DEVICE_ATTR(pwm5_target_temp, S_IWUSR | S_IRUGO, show_target_temp,
+ store_target_temp, 4);
+
+static SENSOR_DEVICE_ATTR(fan1_target, S_IWUSR | S_IRUGO, show_target_speed,
+ store_target_speed, 0);
+static SENSOR_DEVICE_ATTR(fan2_target, S_IWUSR | S_IRUGO, show_target_speed,
+ store_target_speed, 1);
+static SENSOR_DEVICE_ATTR(fan3_target, S_IWUSR | S_IRUGO, show_target_speed,
+ store_target_speed, 2);
+static SENSOR_DEVICE_ATTR(fan4_target, S_IWUSR | S_IRUGO, show_target_speed,
+ store_target_speed, 3);
+static SENSOR_DEVICE_ATTR(fan5_target, S_IWUSR | S_IRUGO, show_target_speed,
+ store_target_speed, 4);
+
+static SENSOR_DEVICE_ATTR(fan1_tolerance, S_IWUSR | S_IRUGO,
+ show_speed_tolerance, store_speed_tolerance, 0);
+static SENSOR_DEVICE_ATTR(fan2_tolerance, S_IWUSR | S_IRUGO,
+ show_speed_tolerance, store_speed_tolerance, 1);
+static SENSOR_DEVICE_ATTR(fan3_tolerance, S_IWUSR | S_IRUGO,
+ show_speed_tolerance, store_speed_tolerance, 2);
+static SENSOR_DEVICE_ATTR(fan4_tolerance, S_IWUSR | S_IRUGO,
+ show_speed_tolerance, store_speed_tolerance, 3);
+static SENSOR_DEVICE_ATTR(fan5_tolerance, S_IWUSR | S_IRUGO,
+ show_speed_tolerance, store_speed_tolerance, 4);
+
+/* Smart Fan registers */
+
+static ssize_t
+show_fan_time(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct nct6775_data *data = nct6775_update_device(dev);
+ struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+ int nr = sattr->nr;
+ int index = sattr->index;
+
+ return sprintf(buf, "%d\n",
+ step_time_from_reg(data->fan_time[index][nr],
+ data->pwm_mode[nr]));
+}
+
+static ssize_t
+store_fan_time(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct nct6775_data *data = dev_get_drvdata(dev);
+ struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+ int nr = sattr->nr;
+ int index = sattr->index;
+ unsigned long val;
+ int err;
+
+ err = kstrtoul(buf, 10, &val);
+ if (err < 0)
+ return err;
+
+ val = step_time_to_reg(val, data->pwm_mode[nr]);
+ mutex_lock(&data->update_lock);
+ data->fan_time[index][nr] = val;
+ nct6775_write_value(data, data->REG_FAN_TIME[index][nr], val);
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
static ssize_t
show_name(struct device *dev, struct device_attribute *attr, char *buf)
{
@@ -1850,35 +2423,190 @@ show_name(struct device *dev, struct device_attribute *attr, char *buf)
static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
-static struct attribute *nct6775_attributes_pwm[5][4] = {
+static SENSOR_DEVICE_ATTR_2(pwm1_stop_time, S_IWUSR | S_IRUGO, show_fan_time,
+ store_fan_time, 0, 0);
+static SENSOR_DEVICE_ATTR_2(pwm2_stop_time, S_IWUSR | S_IRUGO, show_fan_time,
+ store_fan_time, 1, 0);
+static SENSOR_DEVICE_ATTR_2(pwm3_stop_time, S_IWUSR | S_IRUGO, show_fan_time,
+ store_fan_time, 2, 0);
+static SENSOR_DEVICE_ATTR_2(pwm4_stop_time, S_IWUSR | S_IRUGO, show_fan_time,
+ store_fan_time, 3, 0);
+static SENSOR_DEVICE_ATTR_2(pwm5_stop_time, S_IWUSR | S_IRUGO, show_fan_time,
+ store_fan_time, 4, 0);
+
+static SENSOR_DEVICE_ATTR_2(pwm1_step_up_time, S_IWUSR | S_IRUGO, show_fan_time,
+ store_fan_time, 0, 1);
+static SENSOR_DEVICE_ATTR_2(pwm2_step_up_time, S_IWUSR | S_IRUGO, show_fan_time,
+ store_fan_time, 1, 1);
+static SENSOR_DEVICE_ATTR_2(pwm3_step_up_time, S_IWUSR | S_IRUGO, show_fan_time,
+ store_fan_time, 2, 1);
+static SENSOR_DEVICE_ATTR_2(pwm4_step_up_time, S_IWUSR | S_IRUGO, show_fan_time,
+ store_fan_time, 3, 1);
+static SENSOR_DEVICE_ATTR_2(pwm5_step_up_time, S_IWUSR | S_IRUGO, show_fan_time,
+ store_fan_time, 4, 1);
+
+static SENSOR_DEVICE_ATTR_2(pwm1_step_down_time, S_IWUSR | S_IRUGO,
+ show_fan_time, store_fan_time, 0, 2);
+static SENSOR_DEVICE_ATTR_2(pwm2_step_down_time, S_IWUSR | S_IRUGO,
+ show_fan_time, store_fan_time, 1, 2);
+static SENSOR_DEVICE_ATTR_2(pwm3_step_down_time, S_IWUSR | S_IRUGO,
+ show_fan_time, store_fan_time, 2, 2);
+static SENSOR_DEVICE_ATTR_2(pwm4_step_down_time, S_IWUSR | S_IRUGO,
+ show_fan_time, store_fan_time, 3, 2);
+static SENSOR_DEVICE_ATTR_2(pwm5_step_down_time, S_IWUSR | S_IRUGO,
+ show_fan_time, store_fan_time, 4, 2);
+
+static SENSOR_DEVICE_ATTR_2(pwm1_start, S_IWUSR | S_IRUGO, show_pwm,
+ store_pwm, 0, 1);
+static SENSOR_DEVICE_ATTR_2(pwm2_start, S_IWUSR | S_IRUGO, show_pwm,
+ store_pwm, 1, 1);
+static SENSOR_DEVICE_ATTR_2(pwm3_start, S_IWUSR | S_IRUGO, show_pwm,
+ store_pwm, 2, 1);
+static SENSOR_DEVICE_ATTR_2(pwm4_start, S_IWUSR | S_IRUGO, show_pwm,
+ store_pwm, 3, 1);
+static SENSOR_DEVICE_ATTR_2(pwm5_start, S_IWUSR | S_IRUGO, show_pwm,
+ store_pwm, 4, 1);
+
+static SENSOR_DEVICE_ATTR_2(pwm1_floor, S_IWUSR | S_IRUGO, show_pwm,
+ store_pwm, 0, 2);
+static SENSOR_DEVICE_ATTR_2(pwm2_floor, S_IWUSR | S_IRUGO, show_pwm,
+ store_pwm, 1, 2);
+static SENSOR_DEVICE_ATTR_2(pwm3_floor, S_IWUSR | S_IRUGO, show_pwm,
+ store_pwm, 2, 2);
+static SENSOR_DEVICE_ATTR_2(pwm4_floor, S_IWUSR | S_IRUGO, show_pwm,
+ store_pwm, 3, 2);
+static SENSOR_DEVICE_ATTR_2(pwm5_floor, S_IWUSR | S_IRUGO, show_pwm,
+ store_pwm, 4, 2);
+
+static SENSOR_DEVICE_ATTR_2(pwm1_temp_tolerance, S_IWUSR | S_IRUGO,
+ show_temp_tolerance, store_temp_tolerance, 0, 0);
+static SENSOR_DEVICE_ATTR_2(pwm2_temp_tolerance, S_IWUSR | S_IRUGO,
+ show_temp_tolerance, store_temp_tolerance, 1, 0);
+static SENSOR_DEVICE_ATTR_2(pwm3_temp_tolerance, S_IWUSR | S_IRUGO,
+ show_temp_tolerance, store_temp_tolerance, 2, 0);
+static SENSOR_DEVICE_ATTR_2(pwm4_temp_tolerance, S_IWUSR | S_IRUGO,
+ show_temp_tolerance, store_temp_tolerance, 3, 0);
+static SENSOR_DEVICE_ATTR_2(pwm5_temp_tolerance, S_IWUSR | S_IRUGO,
+ show_temp_tolerance, store_temp_tolerance, 4, 0);
+
+static SENSOR_DEVICE_ATTR_2(pwm1_crit_temp_tolerance, S_IWUSR | S_IRUGO,
+ show_temp_tolerance, store_temp_tolerance, 0, 1);
+static SENSOR_DEVICE_ATTR_2(pwm2_crit_temp_tolerance, S_IWUSR | S_IRUGO,
+ show_temp_tolerance, store_temp_tolerance, 1, 1);
+static SENSOR_DEVICE_ATTR_2(pwm3_crit_temp_tolerance, S_IWUSR | S_IRUGO,
+ show_temp_tolerance, store_temp_tolerance, 2, 1);
+static SENSOR_DEVICE_ATTR_2(pwm4_crit_temp_tolerance, S_IWUSR | S_IRUGO,
+ show_temp_tolerance, store_temp_tolerance, 3, 1);
+static SENSOR_DEVICE_ATTR_2(pwm5_crit_temp_tolerance, S_IWUSR | S_IRUGO,
+ show_temp_tolerance, store_temp_tolerance, 4, 1);
+
+/* pwm_max is not supported on all chips */
+static struct sensor_device_attribute_2 sda_pwm_max[] = {
+ SENSOR_ATTR_2(pwm1_max, S_IWUSR | S_IRUGO, show_pwm, store_pwm,
+ 0, 3),
+ SENSOR_ATTR_2(pwm2_max, S_IWUSR | S_IRUGO, show_pwm, store_pwm,
+ 1, 3),
+ SENSOR_ATTR_2(pwm3_max, S_IWUSR | S_IRUGO, show_pwm, store_pwm,
+ 2, 3),
+ SENSOR_ATTR_2(pwm4_max, S_IWUSR | S_IRUGO, show_pwm, store_pwm,
+ 3, 3),
+ SENSOR_ATTR_2(pwm5_max, S_IWUSR | S_IRUGO, show_pwm, store_pwm,
+ 4, 3),
+};
+
+/* pwm_step is not supported on all chips */
+static struct sensor_device_attribute_2 sda_pwm_step[] = {
+ SENSOR_ATTR_2(pwm1_step, S_IWUSR | S_IRUGO, show_pwm, store_pwm, 0, 4),
+ SENSOR_ATTR_2(pwm2_step, S_IWUSR | S_IRUGO, show_pwm, store_pwm, 1, 4),
+ SENSOR_ATTR_2(pwm3_step, S_IWUSR | S_IRUGO, show_pwm, store_pwm, 2, 4),
+ SENSOR_ATTR_2(pwm4_step, S_IWUSR | S_IRUGO, show_pwm, store_pwm, 3, 4),
+ SENSOR_ATTR_2(pwm5_step, S_IWUSR | S_IRUGO, show_pwm, store_pwm, 4, 4),
+};
+
+static struct attribute *nct6775_attributes_pwm[5][15] = {
{
&sensor_dev_attr_pwm1.dev_attr.attr,
&sensor_dev_attr_pwm1_mode.dev_attr.attr,
&sensor_dev_attr_pwm1_enable.dev_attr.attr,
+ &sensor_dev_attr_pwm1_temp_sel.dev_attr.attr,
+ &sensor_dev_attr_pwm1_temp_tolerance.dev_attr.attr,
+ &sensor_dev_attr_pwm1_crit_temp_tolerance.dev_attr.attr,
+ &sensor_dev_attr_pwm1_target_temp.dev_attr.attr,
+ &sensor_dev_attr_fan1_target.dev_attr.attr,
+ &sensor_dev_attr_fan1_tolerance.dev_attr.attr,
+ &sensor_dev_attr_pwm1_stop_time.dev_attr.attr,
+ &sensor_dev_attr_pwm1_step_up_time.dev_attr.attr,
+ &sensor_dev_attr_pwm1_step_down_time.dev_attr.attr,
+ &sensor_dev_attr_pwm1_start.dev_attr.attr,
+ &sensor_dev_attr_pwm1_floor.dev_attr.attr,
NULL
},
{
&sensor_dev_attr_pwm2.dev_attr.attr,
&sensor_dev_attr_pwm2_mode.dev_attr.attr,
&sensor_dev_attr_pwm2_enable.dev_attr.attr,
+ &sensor_dev_attr_pwm2_temp_sel.dev_attr.attr,
+ &sensor_dev_attr_pwm2_temp_tolerance.dev_attr.attr,
+ &sensor_dev_attr_pwm2_crit_temp_tolerance.dev_attr.attr,
+ &sensor_dev_attr_pwm2_target_temp.dev_attr.attr,
+ &sensor_dev_attr_fan2_target.dev_attr.attr,
+ &sensor_dev_attr_fan2_tolerance.dev_attr.attr,
+ &sensor_dev_attr_pwm2_stop_time.dev_attr.attr,
+ &sensor_dev_attr_pwm2_step_up_time.dev_attr.attr,
+ &sensor_dev_attr_pwm2_step_down_time.dev_attr.attr,
+ &sensor_dev_attr_pwm2_start.dev_attr.attr,
+ &sensor_dev_attr_pwm2_floor.dev_attr.attr,
NULL
},
{
&sensor_dev_attr_pwm3.dev_attr.attr,
&sensor_dev_attr_pwm3_mode.dev_attr.attr,
&sensor_dev_attr_pwm3_enable.dev_attr.attr,
+ &sensor_dev_attr_pwm3_temp_sel.dev_attr.attr,
+ &sensor_dev_attr_pwm3_temp_tolerance.dev_attr.attr,
+ &sensor_dev_attr_pwm3_crit_temp_tolerance.dev_attr.attr,
+ &sensor_dev_attr_pwm3_target_temp.dev_attr.attr,
+ &sensor_dev_attr_fan3_target.dev_attr.attr,
+ &sensor_dev_attr_fan3_tolerance.dev_attr.attr,
+ &sensor_dev_attr_pwm3_stop_time.dev_attr.attr,
+ &sensor_dev_attr_pwm3_step_up_time.dev_attr.attr,
+ &sensor_dev_attr_pwm3_step_down_time.dev_attr.attr,
+ &sensor_dev_attr_pwm3_start.dev_attr.attr,
+ &sensor_dev_attr_pwm3_floor.dev_attr.attr,
NULL
},
{
&sensor_dev_attr_pwm4.dev_attr.attr,
&sensor_dev_attr_pwm4_mode.dev_attr.attr,
&sensor_dev_attr_pwm4_enable.dev_attr.attr,
+ &sensor_dev_attr_pwm4_temp_sel.dev_attr.attr,
+ &sensor_dev_attr_pwm4_temp_tolerance.dev_attr.attr,
+ &sensor_dev_attr_pwm4_crit_temp_tolerance.dev_attr.attr,
+ &sensor_dev_attr_pwm4_target_temp.dev_attr.attr,
+ &sensor_dev_attr_fan4_target.dev_attr.attr,
+ &sensor_dev_attr_fan4_tolerance.dev_attr.attr,
+ &sensor_dev_attr_pwm4_stop_time.dev_attr.attr,
+ &sensor_dev_attr_pwm4_step_up_time.dev_attr.attr,
+ &sensor_dev_attr_pwm4_step_down_time.dev_attr.attr,
+ &sensor_dev_attr_pwm4_start.dev_attr.attr,
+ &sensor_dev_attr_pwm4_floor.dev_attr.attr,
NULL
},
{
&sensor_dev_attr_pwm5.dev_attr.attr,
&sensor_dev_attr_pwm5_mode.dev_attr.attr,
&sensor_dev_attr_pwm5_enable.dev_attr.attr,
+ &sensor_dev_attr_pwm5_temp_sel.dev_attr.attr,
+ &sensor_dev_attr_pwm5_temp_tolerance.dev_attr.attr,
+ &sensor_dev_attr_pwm5_crit_temp_tolerance.dev_attr.attr,
+ &sensor_dev_attr_pwm5_target_temp.dev_attr.attr,
+ &sensor_dev_attr_fan5_target.dev_attr.attr,
+ &sensor_dev_attr_fan5_tolerance.dev_attr.attr,
+ &sensor_dev_attr_pwm5_stop_time.dev_attr.attr,
+ &sensor_dev_attr_pwm5_step_up_time.dev_attr.attr,
+ &sensor_dev_attr_pwm5_step_down_time.dev_attr.attr,
+ &sensor_dev_attr_pwm5_start.dev_attr.attr,
+ &sensor_dev_attr_pwm5_floor.dev_attr.attr,
NULL
},
};
@@ -1892,6 +2620,277 @@ static const struct attribute_group nct6775_group_pwm[5] = {
};
static ssize_t
+show_auto_pwm(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct nct6775_data *data = nct6775_update_device(dev);
+ struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+
+ return sprintf(buf, "%d\n", data->auto_pwm[sattr->nr][sattr->index]);
+}
+
+static ssize_t
+store_auto_pwm(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct nct6775_data *data = dev_get_drvdata(dev);
+ struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+ int nr = sattr->nr;
+ int point = sattr->index;
+ unsigned long val;
+ int err;
+ u8 reg;
+
+ err = kstrtoul(buf, 10, &val);
+ if (err < 0)
+ return err;
+ if (val > 255)
+ return -EINVAL;
+
+ if (point == data->auto_pwm_num) {
+ if (data->kind != nct6775 && !val)
+ return -EINVAL;
+ if (data->kind != nct6779 && val)
+ val = 0xff;
+ }
+
+ mutex_lock(&data->update_lock);
+ data->auto_pwm[nr][point] = val;
+ if (point < data->auto_pwm_num) {
+ nct6775_write_value(data,
+ NCT6775_AUTO_PWM(data, nr, point),
+ data->auto_pwm[nr][point]);
+ } else {
+ switch (data->kind) {
+ case nct6775:
+ /* disable if needed (pwm == 0) */
+ reg = nct6775_read_value(data,
+ NCT6775_REG_CRITICAL_ENAB[nr]);
+ if (val)
+ reg |= 0x02;
+ else
+ reg &= ~0x02;
+ nct6775_write_value(data, NCT6775_REG_CRITICAL_ENAB[nr],
+ reg);
+ break;
+ case nct6776:
+ break; /* always enabled, nothing to do */
+ case nct6779:
+ nct6775_write_value(data, NCT6779_REG_CRITICAL_PWM[nr],
+ val);
+ reg = nct6775_read_value(data,
+ NCT6779_REG_CRITICAL_PWM_ENABLE[nr]);
+ if (val == 255)
+ reg &= ~0x01;
+ else
+ reg |= 0x01;
+ nct6775_write_value(data,
+ NCT6779_REG_CRITICAL_PWM_ENABLE[nr],
+ reg);
+ break;
+ }
+ }
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+static ssize_t
+show_auto_temp(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct nct6775_data *data = nct6775_update_device(dev);
+ struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+ int nr = sattr->nr;
+ int point = sattr->index;
+
+ /*
+ * We don't know for sure if the temperature is signed or unsigned.
+ * Assume it is unsigned.
+ */
+ return sprintf(buf, "%d\n", data->auto_temp[nr][point] * 1000);
+}
+
+static ssize_t
+store_auto_temp(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct nct6775_data *data = dev_get_drvdata(dev);
+ struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+ int nr = sattr->nr;
+ int point = sattr->index;
+ unsigned long val;
+ int err;
+
+ err = kstrtoul(buf, 10, &val);
+ if (err)
+ return err;
+ if (val > 255000)
+ return -EINVAL;
+
+ mutex_lock(&data->update_lock);
+ data->auto_temp[nr][point] = DIV_ROUND_CLOSEST(val, 1000);
+ if (point < data->auto_pwm_num) {
+ nct6775_write_value(data,
+ NCT6775_AUTO_TEMP(data, nr, point),
+ data->auto_temp[nr][point]);
+ } else {
+ nct6775_write_value(data, data->REG_CRITICAL_TEMP[nr],
+ data->auto_temp[nr][point]);
+ }
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+/*
+ * The number of auto-point trip points is chip dependent.
+ * Need to check support while generating/removing attribute files.
+ */
+static struct sensor_device_attribute_2 sda_auto_pwm_arrays[] = {
+ SENSOR_ATTR_2(pwm1_auto_point1_pwm, S_IWUSR | S_IRUGO,
+ show_auto_pwm, store_auto_pwm, 0, 0),
+ SENSOR_ATTR_2(pwm1_auto_point1_temp, S_IWUSR | S_IRUGO,
+ show_auto_temp, store_auto_temp, 0, 0),
+ SENSOR_ATTR_2(pwm1_auto_point2_pwm, S_IWUSR | S_IRUGO,
+ show_auto_pwm, store_auto_pwm, 0, 1),
+ SENSOR_ATTR_2(pwm1_auto_point2_temp, S_IWUSR | S_IRUGO,
+ show_auto_temp, store_auto_temp, 0, 1),
+ SENSOR_ATTR_2(pwm1_auto_point3_pwm, S_IWUSR | S_IRUGO,
+ show_auto_pwm, store_auto_pwm, 0, 2),
+ SENSOR_ATTR_2(pwm1_auto_point3_temp, S_IWUSR | S_IRUGO,
+ show_auto_temp, store_auto_temp, 0, 2),
+ SENSOR_ATTR_2(pwm1_auto_point4_pwm, S_IWUSR | S_IRUGO,
+ show_auto_pwm, store_auto_pwm, 0, 3),
+ SENSOR_ATTR_2(pwm1_auto_point4_temp, S_IWUSR | S_IRUGO,
+ show_auto_temp, store_auto_temp, 0, 3),
+ SENSOR_ATTR_2(pwm1_auto_point5_pwm, S_IWUSR | S_IRUGO,
+ show_auto_pwm, store_auto_pwm, 0, 4),
+ SENSOR_ATTR_2(pwm1_auto_point5_temp, S_IWUSR | S_IRUGO,
+ show_auto_temp, store_auto_temp, 0, 4),
+ SENSOR_ATTR_2(pwm1_auto_point6_pwm, S_IWUSR | S_IRUGO,
+ show_auto_pwm, store_auto_pwm, 0, 5),
+ SENSOR_ATTR_2(pwm1_auto_point6_temp, S_IWUSR | S_IRUGO,
+ show_auto_temp, store_auto_temp, 0, 5),
+ SENSOR_ATTR_2(pwm1_auto_point7_pwm, S_IWUSR | S_IRUGO,
+ show_auto_pwm, store_auto_pwm, 0, 6),
+ SENSOR_ATTR_2(pwm1_auto_point7_temp, S_IWUSR | S_IRUGO,
+ show_auto_temp, store_auto_temp, 0, 6),
+
+ SENSOR_ATTR_2(pwm2_auto_point1_pwm, S_IWUSR | S_IRUGO,
+ show_auto_pwm, store_auto_pwm, 1, 0),
+ SENSOR_ATTR_2(pwm2_auto_point1_temp, S_IWUSR | S_IRUGO,
+ show_auto_temp, store_auto_temp, 1, 0),
+ SENSOR_ATTR_2(pwm2_auto_point2_pwm, S_IWUSR | S_IRUGO,
+ show_auto_pwm, store_auto_pwm, 1, 1),
+ SENSOR_ATTR_2(pwm2_auto_point2_temp, S_IWUSR | S_IRUGO,
+ show_auto_temp, store_auto_temp, 1, 1),
+ SENSOR_ATTR_2(pwm2_auto_point3_pwm, S_IWUSR | S_IRUGO,
+ show_auto_pwm, store_auto_pwm, 1, 2),
+ SENSOR_ATTR_2(pwm2_auto_point3_temp, S_IWUSR | S_IRUGO,
+ show_auto_temp, store_auto_temp, 1, 2),
+ SENSOR_ATTR_2(pwm2_auto_point4_pwm, S_IWUSR | S_IRUGO,
+ show_auto_pwm, store_auto_pwm, 1, 3),
+ SENSOR_ATTR_2(pwm2_auto_point4_temp, S_IWUSR | S_IRUGO,
+ show_auto_temp, store_auto_temp, 1, 3),
+ SENSOR_ATTR_2(pwm2_auto_point5_pwm, S_IWUSR | S_IRUGO,
+ show_auto_pwm, store_auto_pwm, 1, 4),
+ SENSOR_ATTR_2(pwm2_auto_point5_temp, S_IWUSR | S_IRUGO,
+ show_auto_temp, store_auto_temp, 1, 4),
+ SENSOR_ATTR_2(pwm2_auto_point6_pwm, S_IWUSR | S_IRUGO,
+ show_auto_pwm, store_auto_pwm, 1, 5),
+ SENSOR_ATTR_2(pwm2_auto_point6_temp, S_IWUSR | S_IRUGO,
+ show_auto_temp, store_auto_temp, 1, 5),
+ SENSOR_ATTR_2(pwm2_auto_point7_pwm, S_IWUSR | S_IRUGO,
+ show_auto_pwm, store_auto_pwm, 1, 6),
+ SENSOR_ATTR_2(pwm2_auto_point7_temp, S_IWUSR | S_IRUGO,
+ show_auto_temp, store_auto_temp, 1, 6),
+
+ SENSOR_ATTR_2(pwm3_auto_point1_pwm, S_IWUSR | S_IRUGO,
+ show_auto_pwm, store_auto_pwm, 2, 0),
+ SENSOR_ATTR_2(pwm3_auto_point1_temp, S_IWUSR | S_IRUGO,
+ show_auto_temp, store_auto_temp, 2, 0),
+ SENSOR_ATTR_2(pwm3_auto_point2_pwm, S_IWUSR | S_IRUGO,
+ show_auto_pwm, store_auto_pwm, 2, 1),
+ SENSOR_ATTR_2(pwm3_auto_point2_temp, S_IWUSR | S_IRUGO,
+ show_auto_temp, store_auto_temp, 2, 1),
+ SENSOR_ATTR_2(pwm3_auto_point3_pwm, S_IWUSR | S_IRUGO,
+ show_auto_pwm, store_auto_pwm, 2, 2),
+ SENSOR_ATTR_2(pwm3_auto_point3_temp, S_IWUSR | S_IRUGO,
+ show_auto_temp, store_auto_temp, 2, 2),
+ SENSOR_ATTR_2(pwm3_auto_point4_pwm, S_IWUSR | S_IRUGO,
+ show_auto_pwm, store_auto_pwm, 2, 3),
+ SENSOR_ATTR_2(pwm3_auto_point4_temp, S_IWUSR | S_IRUGO,
+ show_auto_temp, store_auto_temp, 2, 3),
+ SENSOR_ATTR_2(pwm3_auto_point5_pwm, S_IWUSR | S_IRUGO,
+ show_auto_pwm, store_auto_pwm, 2, 4),
+ SENSOR_ATTR_2(pwm3_auto_point5_temp, S_IWUSR | S_IRUGO,
+ show_auto_temp, store_auto_temp, 2, 4),
+ SENSOR_ATTR_2(pwm3_auto_point6_pwm, S_IWUSR | S_IRUGO,
+ show_auto_pwm, store_auto_pwm, 2, 5),
+ SENSOR_ATTR_2(pwm3_auto_point6_temp, S_IWUSR | S_IRUGO,
+ show_auto_temp, store_auto_temp, 2, 5),
+ SENSOR_ATTR_2(pwm3_auto_point7_pwm, S_IWUSR | S_IRUGO,
+ show_auto_pwm, store_auto_pwm, 2, 6),
+ SENSOR_ATTR_2(pwm3_auto_point7_temp, S_IWUSR | S_IRUGO,
+ show_auto_temp, store_auto_temp, 2, 6),
+
+ SENSOR_ATTR_2(pwm4_auto_point1_pwm, S_IWUSR | S_IRUGO,
+ show_auto_pwm, store_auto_pwm, 3, 0),
+ SENSOR_ATTR_2(pwm4_auto_point1_temp, S_IWUSR | S_IRUGO,
+ show_auto_temp, store_auto_temp, 3, 0),
+ SENSOR_ATTR_2(pwm4_auto_point2_pwm, S_IWUSR | S_IRUGO,
+ show_auto_pwm, store_auto_pwm, 3, 1),
+ SENSOR_ATTR_2(pwm4_auto_point2_temp, S_IWUSR | S_IRUGO,
+ show_auto_temp, store_auto_temp, 3, 1),
+ SENSOR_ATTR_2(pwm4_auto_point3_pwm, S_IWUSR | S_IRUGO,
+ show_auto_pwm, store_auto_pwm, 3, 2),
+ SENSOR_ATTR_2(pwm4_auto_point3_temp, S_IWUSR | S_IRUGO,
+ show_auto_temp, store_auto_temp, 3, 2),
+ SENSOR_ATTR_2(pwm4_auto_point4_pwm, S_IWUSR | S_IRUGO,
+ show_auto_pwm, store_auto_pwm, 3, 3),
+ SENSOR_ATTR_2(pwm4_auto_point4_temp, S_IWUSR | S_IRUGO,
+ show_auto_temp, store_auto_temp, 3, 3),
+ SENSOR_ATTR_2(pwm4_auto_point5_pwm, S_IWUSR | S_IRUGO,
+ show_auto_pwm, store_auto_pwm, 3, 4),
+ SENSOR_ATTR_2(pwm4_auto_point5_temp, S_IWUSR | S_IRUGO,
+ show_auto_temp, store_auto_temp, 3, 4),
+ SENSOR_ATTR_2(pwm4_auto_point6_pwm, S_IWUSR | S_IRUGO,
+ show_auto_pwm, store_auto_pwm, 3, 5),
+ SENSOR_ATTR_2(pwm4_auto_point6_temp, S_IWUSR | S_IRUGO,
+ show_auto_temp, store_auto_temp, 3, 5),
+ SENSOR_ATTR_2(pwm4_auto_point7_pwm, S_IWUSR | S_IRUGO,
+ show_auto_pwm, store_auto_pwm, 3, 6),
+ SENSOR_ATTR_2(pwm4_auto_point7_temp, S_IWUSR | S_IRUGO,
+ show_auto_temp, store_auto_temp, 3, 6),
+
+ SENSOR_ATTR_2(pwm5_auto_point1_pwm, S_IWUSR | S_IRUGO,
+ show_auto_pwm, store_auto_pwm, 4, 0),
+ SENSOR_ATTR_2(pwm5_auto_point1_temp, S_IWUSR | S_IRUGO,
+ show_auto_temp, store_auto_temp, 4, 0),
+ SENSOR_ATTR_2(pwm5_auto_point2_pwm, S_IWUSR | S_IRUGO,
+ show_auto_pwm, store_auto_pwm, 4, 1),
+ SENSOR_ATTR_2(pwm5_auto_point2_temp, S_IWUSR | S_IRUGO,
+ show_auto_temp, store_auto_temp, 4, 1),
+ SENSOR_ATTR_2(pwm5_auto_point3_pwm, S_IWUSR | S_IRUGO,
+ show_auto_pwm, store_auto_pwm, 4, 2),
+ SENSOR_ATTR_2(pwm5_auto_point3_temp, S_IWUSR | S_IRUGO,
+ show_auto_temp, store_auto_temp, 4, 2),
+ SENSOR_ATTR_2(pwm5_auto_point4_pwm, S_IWUSR | S_IRUGO,
+ show_auto_pwm, store_auto_pwm, 4, 3),
+ SENSOR_ATTR_2(pwm5_auto_point4_temp, S_IWUSR | S_IRUGO,
+ show_auto_temp, store_auto_temp, 4, 3),
+ SENSOR_ATTR_2(pwm5_auto_point5_pwm, S_IWUSR | S_IRUGO,
+ show_auto_pwm, store_auto_pwm, 4, 4),
+ SENSOR_ATTR_2(pwm5_auto_point5_temp, S_IWUSR | S_IRUGO,
+ show_auto_temp, store_auto_temp, 4, 4),
+ SENSOR_ATTR_2(pwm5_auto_point6_pwm, S_IWUSR | S_IRUGO,
+ show_auto_pwm, store_auto_pwm, 4, 5),
+ SENSOR_ATTR_2(pwm5_auto_point6_temp, S_IWUSR | S_IRUGO,
+ show_auto_temp, store_auto_temp, 4, 5),
+ SENSOR_ATTR_2(pwm5_auto_point7_pwm, S_IWUSR | S_IRUGO,
+ show_auto_pwm, store_auto_pwm, 4, 6),
+ SENSOR_ATTR_2(pwm5_auto_point7_temp, S_IWUSR | S_IRUGO,
+ show_auto_temp, store_auto_temp, 4, 6),
+};
+
+static ssize_t
show_vid(struct device *dev, struct device_attribute *attr, char *buf)
{
struct nct6775_data *data = dev_get_drvdata(dev);
@@ -1966,6 +2965,15 @@ static void nct6775_device_remove_files(struct device *dev)
for (i = 0; i < data->pwm_num; i++)
sysfs_remove_group(&dev->kobj, &nct6775_group_pwm[i]);
+ for (i = 0; i < ARRAY_SIZE(sda_pwm_max); i++)
+ device_remove_file(dev, &sda_pwm_max[i].dev_attr);
+
+ for (i = 0; i < ARRAY_SIZE(sda_pwm_step); i++)
+ device_remove_file(dev, &sda_pwm_step[i].dev_attr);
+
+ for (i = 0; i < ARRAY_SIZE(sda_auto_pwm_arrays); i++)
+ device_remove_file(dev, &sda_auto_pwm_arrays[i].dev_attr);
+
for (i = 0; i < data->in_num; i++)
sysfs_remove_group(&dev->kobj, &nct6775_group_in[i]);
@@ -2158,6 +3166,7 @@ static int nct6775_probe(struct platform_device *pdev)
case nct6775:
data->in_num = 9;
data->pwm_num = 3;
+ data->auto_pwm_num = 6;
data->has_fan_div = true;
data->temp_fixed_num = 3;
@@ -2165,6 +3174,9 @@ static int nct6775_probe(struct platform_device *pdev)
data->fan_from_reg = fan_from_reg16;
data->fan_from_reg_min = fan_from_reg8;
+ data->target_temp_mask = 0x7f;
+ data->tolerance_mask = 0x0f;
+ data->speed_tolerance_limit = 15;
data->temp_label = nct6775_temp_label;
data->temp_label_num = ARRAY_SIZE(nct6775_temp_label);
@@ -2175,16 +3187,30 @@ static int nct6775_probe(struct platform_device *pdev)
data->REG_VIN = NCT6775_REG_IN;
data->REG_IN_MINMAX[0] = NCT6775_REG_IN_MIN;
data->REG_IN_MINMAX[1] = NCT6775_REG_IN_MAX;
+ data->REG_TARGET = NCT6775_REG_TARGET;
data->REG_FAN = NCT6775_REG_FAN;
data->REG_FAN_MODE = NCT6775_REG_FAN_MODE;
data->REG_FAN_MIN = NCT6775_REG_FAN_MIN;
data->REG_FAN_PULSES = NCT6775_REG_FAN_PULSES;
+ data->REG_FAN_TIME[0] = NCT6775_REG_FAN_STOP_TIME;
+ data->REG_FAN_TIME[1] = NCT6775_REG_FAN_STEP_UP_TIME;
+ data->REG_FAN_TIME[2] = NCT6775_REG_FAN_STEP_DOWN_TIME;
data->REG_PWM[0] = NCT6775_REG_PWM;
+ data->REG_PWM[1] = NCT6775_REG_FAN_START_OUTPUT;
+ data->REG_PWM[2] = NCT6775_REG_FAN_STOP_OUTPUT;
+ data->REG_PWM[3] = NCT6775_REG_FAN_MAX_OUTPUT;
+ data->REG_PWM[4] = NCT6775_REG_FAN_STEP_OUTPUT;
data->REG_PWM_READ = NCT6775_REG_PWM_READ;
data->REG_PWM_MODE = NCT6775_REG_PWM_MODE;
data->PWM_MODE_MASK = NCT6775_PWM_MODE_MASK;
+ data->REG_AUTO_TEMP = NCT6775_REG_AUTO_TEMP;
+ data->REG_AUTO_PWM = NCT6775_REG_AUTO_PWM;
+ data->REG_CRITICAL_TEMP = NCT6775_REG_CRITICAL_TEMP;
+ data->REG_CRITICAL_TEMP_TOLERANCE
+ = NCT6775_REG_CRITICAL_TEMP_TOLERANCE;
data->REG_TEMP_OFFSET = NCT6775_REG_TEMP_OFFSET;
data->REG_TEMP_SOURCE = NCT6775_REG_TEMP_SOURCE;
+ data->REG_TEMP_SEL = NCT6775_REG_TEMP_SEL;
data->REG_ALARM = NCT6775_REG_ALARM;
reg_temp = NCT6775_REG_TEMP;
@@ -2199,6 +3225,7 @@ static int nct6775_probe(struct platform_device *pdev)
case nct6776:
data->in_num = 9;
data->pwm_num = 3;
+ data->auto_pwm_num = 4;
data->has_fan_div = false;
data->temp_fixed_num = 3;
@@ -2206,6 +3233,9 @@ static int nct6775_probe(struct platform_device *pdev)
data->fan_from_reg = fan_from_reg13;
data->fan_from_reg_min = fan_from_reg13;
+ data->target_temp_mask = 0xff;
+ data->tolerance_mask = 0x07;
+ data->speed_tolerance_limit = 63;
data->temp_label = nct6776_temp_label;
data->temp_label_num = ARRAY_SIZE(nct6776_temp_label);
@@ -2216,16 +3246,29 @@ static int nct6775_probe(struct platform_device *pdev)
data->REG_VIN = NCT6775_REG_IN;
data->REG_IN_MINMAX[0] = NCT6775_REG_IN_MIN;
data->REG_IN_MINMAX[1] = NCT6775_REG_IN_MAX;
+ data->REG_TARGET = NCT6775_REG_TARGET;
data->REG_FAN = NCT6775_REG_FAN;
data->REG_FAN_MODE = NCT6775_REG_FAN_MODE;
data->REG_FAN_MIN = NCT6776_REG_FAN_MIN;
data->REG_FAN_PULSES = NCT6776_REG_FAN_PULSES;
+ data->REG_FAN_TIME[0] = NCT6775_REG_FAN_STOP_TIME;
+ data->REG_FAN_TIME[1] = NCT6775_REG_FAN_STEP_UP_TIME;
+ data->REG_FAN_TIME[2] = NCT6775_REG_FAN_STEP_DOWN_TIME;
+ data->REG_TOLERANCE_H = NCT6776_REG_TOLERANCE_H;
data->REG_PWM[0] = NCT6775_REG_PWM;
+ data->REG_PWM[1] = NCT6775_REG_FAN_START_OUTPUT;
+ data->REG_PWM[2] = NCT6775_REG_FAN_STOP_OUTPUT;
data->REG_PWM_READ = NCT6775_REG_PWM_READ;
data->REG_PWM_MODE = NCT6776_REG_PWM_MODE;
data->PWM_MODE_MASK = NCT6776_PWM_MODE_MASK;
+ data->REG_AUTO_TEMP = NCT6775_REG_AUTO_TEMP;
+ data->REG_AUTO_PWM = NCT6775_REG_AUTO_PWM;
+ data->REG_CRITICAL_TEMP = NCT6775_REG_CRITICAL_TEMP;
+ data->REG_CRITICAL_TEMP_TOLERANCE
+ = NCT6775_REG_CRITICAL_TEMP_TOLERANCE;
data->REG_TEMP_OFFSET = NCT6775_REG_TEMP_OFFSET;
data->REG_TEMP_SOURCE = NCT6775_REG_TEMP_SOURCE;
+ data->REG_TEMP_SEL = NCT6775_REG_TEMP_SEL;
data->REG_ALARM = NCT6775_REG_ALARM;
reg_temp = NCT6775_REG_TEMP;
@@ -2240,6 +3283,7 @@ static int nct6775_probe(struct platform_device *pdev)
case nct6779:
data->in_num = 15;
data->pwm_num = 5;
+ data->auto_pwm_num = 4;
data->has_fan_div = false;
data->temp_fixed_num = 6;
@@ -2247,6 +3291,9 @@ static int nct6775_probe(struct platform_device *pdev)
data->fan_from_reg = fan_from_reg13;
data->fan_from_reg_min = fan_from_reg13;
+ data->target_temp_mask = 0xff;
+ data->tolerance_mask = 0x07;
+ data->speed_tolerance_limit = 63;
data->temp_label = nct6779_temp_label;
data->temp_label_num = ARRAY_SIZE(nct6779_temp_label);
@@ -2257,16 +3304,29 @@ static int nct6775_probe(struct platform_device *pdev)
data->REG_VIN = NCT6779_REG_IN;
data->REG_IN_MINMAX[0] = NCT6775_REG_IN_MIN;
data->REG_IN_MINMAX[1] = NCT6775_REG_IN_MAX;
+ data->REG_TARGET = NCT6775_REG_TARGET;
data->REG_FAN = NCT6779_REG_FAN;
data->REG_FAN_MODE = NCT6775_REG_FAN_MODE;
data->REG_FAN_MIN = NCT6776_REG_FAN_MIN;
data->REG_FAN_PULSES = NCT6779_REG_FAN_PULSES;
+ data->REG_FAN_TIME[0] = NCT6775_REG_FAN_STOP_TIME;
+ data->REG_FAN_TIME[1] = NCT6775_REG_FAN_STEP_UP_TIME;
+ data->REG_FAN_TIME[2] = NCT6775_REG_FAN_STEP_DOWN_TIME;
+ data->REG_TOLERANCE_H = NCT6776_REG_TOLERANCE_H;
data->REG_PWM[0] = NCT6775_REG_PWM;
+ data->REG_PWM[1] = NCT6775_REG_FAN_START_OUTPUT;
+ data->REG_PWM[2] = NCT6775_REG_FAN_STOP_OUTPUT;
data->REG_PWM_READ = NCT6775_REG_PWM_READ;
data->REG_PWM_MODE = NCT6776_REG_PWM_MODE;
data->PWM_MODE_MASK = NCT6776_PWM_MODE_MASK;
+ data->REG_AUTO_TEMP = NCT6775_REG_AUTO_TEMP;
+ data->REG_AUTO_PWM = NCT6775_REG_AUTO_PWM;
+ data->REG_CRITICAL_TEMP = NCT6775_REG_CRITICAL_TEMP;
+ data->REG_CRITICAL_TEMP_TOLERANCE
+ = NCT6775_REG_CRITICAL_TEMP_TOLERANCE;
data->REG_TEMP_OFFSET = NCT6779_REG_TEMP_OFFSET;
data->REG_TEMP_SOURCE = NCT6775_REG_TEMP_SOURCE;
+ data->REG_TEMP_SEL = NCT6775_REG_TEMP_SEL;
data->REG_ALARM = NCT6779_REG_ALARM;
reg_temp = NCT6779_REG_TEMP;
@@ -2481,6 +3541,31 @@ static int nct6775_probe(struct platform_device *pdev)
err = sysfs_create_group(&dev->kobj, &nct6775_group_pwm[i]);
if (err)
goto exit_remove;
+
+ if (data->REG_PWM[3]) {
+ err = device_create_file(dev,
+ &sda_pwm_max[i].dev_attr);
+ if (err)
+ goto exit_remove;
+ }
+ if (data->REG_PWM[4]) {
+ err = device_create_file(dev,
+ &sda_pwm_step[i].dev_attr);
+ if (err)
+ goto exit_remove;
+ }
+ }
+ for (i = 0; i < ARRAY_SIZE(sda_auto_pwm_arrays); i++) {
+ struct sensor_device_attribute_2 *attr =
+ &sda_auto_pwm_arrays[i];
+
+ if (!(data->has_pwm & (1 << attr->nr)))
+ continue;
+ if (attr->index > data->auto_pwm_num)
+ continue;
+ err = device_create_file(dev, &attr->dev_attr);
+ if (err)
+ goto exit_remove;
}
for (i = 0; i < data->in_num; i++) {
@@ -2515,7 +3600,7 @@ static int nct6775_probe(struct platform_device *pdev)
goto exit_remove;
}
err = device_create_file(dev,
- &sda_fan_pulses[i].dev_attr);
+ &sda_fan_pulses[i].dev_attr);
if (err)
goto exit_remove;
}
--
1.7.9.7
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists