linux-kernel - [ 094/150] staging: comedi: ni_labpc: set up command4 register *after* command3

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20130226235533.841414371@linuxfoundation.org>
Date:	Tue, 26 Feb 2013 15:55:51 -0800
From:	Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To:	linux-kernel@...r.kernel.org
Cc:	Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
	stable@...r.kernel.org, Ian Abbott <abbotti@....co.uk>
Subject: [ 094/150] staging: comedi: ni_labpc: set up command4 register *after* command3

3.8-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ian Abbott <abbotti@....co.uk>

commit 22056e2b46246d97ff0f7c6e21a77b8daa07f02c upstream.

Tuomas <tvainikk _at_ gmail _dot_ com> reported problems getting
meaningful output from a Lab-PC+ in differential mode for AI cmds, but
AI insn reads gave correct readings.  He tracked it down to two
problems, one of which is addressed by this patch.

It seems that writing to the command3 register after writing to the
command4 register in `labpc_ai_cmd()` messes up the differential
reference bit setting in the command4 register.  Set up the command4
register after the command3 register (as in `labpc_ai_rinsn()`) to avoid
the problem.

Thanks to Tuomas for suggesting the fix.

Signed-off-by: Ian Abbott <abbotti@....co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>

---
 drivers/staging/comedi/drivers/ni_labpc.c |   31 +++++++++++++++---------------
 1 file changed, 16 insertions(+), 15 deletions(-)

--- a/drivers/staging/comedi/drivers/ni_labpc.c
+++ b/drivers/staging/comedi/drivers/ni_labpc.c
@@ -1217,21 +1217,6 @@ static int labpc_ai_cmd(struct comedi_de
 		devpriv->write_byte(devpriv->command1_bits,
 				    dev->iobase + COMMAND1_REG);
 	}
-	/*  setup any external triggering/pacing (command4 register) */
-	devpriv->command4_bits = 0;
-	if (cmd->convert_src != TRIG_EXT)
-		devpriv->command4_bits |= EXT_CONVERT_DISABLE_BIT;
-	/* XXX should discard first scan when using interval scanning
-	 * since manual says it is not synced with scan clock */
-	if (labpc_use_continuous_mode(cmd, mode) == 0) {
-		devpriv->command4_bits |= INTERVAL_SCAN_EN_BIT;
-		if (cmd->scan_begin_src == TRIG_EXT)
-			devpriv->command4_bits |= EXT_SCAN_EN_BIT;
-	}
-	/*  single-ended/differential */
-	if (aref == AREF_DIFF)
-		devpriv->command4_bits |= ADC_DIFF_BIT;
-	devpriv->write_byte(devpriv->command4_bits, dev->iobase + COMMAND4_REG);
 
 	devpriv->write_byte(cmd->chanlist_len,
 			    dev->iobase + INTERVAL_COUNT_REG);
@@ -1311,6 +1296,22 @@ static int labpc_ai_cmd(struct comedi_de
 		devpriv->command3_bits &= ~ADC_FNE_INTR_EN_BIT;
 	devpriv->write_byte(devpriv->command3_bits, dev->iobase + COMMAND3_REG);
 
+	/*  setup any external triggering/pacing (command4 register) */
+	devpriv->command4_bits = 0;
+	if (cmd->convert_src != TRIG_EXT)
+		devpriv->command4_bits |= EXT_CONVERT_DISABLE_BIT;
+	/* XXX should discard first scan when using interval scanning
+	 * since manual says it is not synced with scan clock */
+	if (labpc_use_continuous_mode(cmd, mode) == 0) {
+		devpriv->command4_bits |= INTERVAL_SCAN_EN_BIT;
+		if (cmd->scan_begin_src == TRIG_EXT)
+			devpriv->command4_bits |= EXT_SCAN_EN_BIT;
+	}
+	/*  single-ended/differential */
+	if (aref == AREF_DIFF)
+		devpriv->command4_bits |= ADC_DIFF_BIT;
+	devpriv->write_byte(devpriv->command4_bits, dev->iobase + COMMAND4_REG);
+
 	/*  startup acquisition */
 
 	/*  command2 reg */


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/