| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1742014.AbCVskUi8i@skinner.arch.suse.de>
Date: Mon, 04 Mar 2013 17:14:43 +0100
From: Thomas Renninger <trenn@...e.de>
To: Alan Stern <stern@...land.harvard.edu>
Cc: Hannes Reinecke <hare@...e.de>, linux-usb@...r.kernel.org,
linux-kernel@...r.kernel.org, Bjorn Helgaas <bhelgaas@...gle.com>,
Oliver Neukum <oneukum@...e.de>,
Yinghai Lu <yinghai@...nel.org>,
Frederik Himpe <fhimpe@....ac.be>,
David Haerdeman <david@...deman.nu>
Subject: [PATCH][v3] xhci: correctly enable interrupts
From: Hannes Reinecke <hare@...e.de>
xhci has its own interrupt enabling routine, which will try to
use MSI-X/MSI if present. So the usb core shouldn't try to enable
legacy interrupts; on some machines the xhci legacy IRQ setting
is invalid.
v3: Be careful to not break XHCI_BROKEN_MSI workaround (by trenn)
Cc: Bjorn Helgaas <bhelgaas@...gle.com>
Cc: Oliver Neukum <oneukum@...e.de>
Cc: Thomas Renninger <trenn@...e.de>
Cc: Yinghai Lu <yinghai@...nel.org>
Cc: Frederik Himpe <fhimpe@....ac.be>
Cc: David Haerdeman <david@...deman.nu>
Cc: Alan Stern <stern@...land.harvard.edu>
Reviewed-by: Thomas Renninger <trenn@...e.de>
Signed-off-by: Hannes Reinecke <hare@...e.de>
diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c
index 622b4a4..2b487d4 100644
--- a/drivers/usb/core/hcd-pci.c
+++ b/drivers/usb/core/hcd-pci.c
@@ -173,6 +173,7 @@ int usb_hcd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
struct hc_driver *driver;
struct usb_hcd *hcd;
int retval;
+ int hcd_irq = 0;
if (usb_disabled())
return -ENODEV;
@@ -187,15 +188,19 @@ int usb_hcd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
return -ENODEV;
dev->current_state = PCI_D0;
- /* The xHCI driver supports MSI and MSI-X,
- * so don't fail if the BIOS doesn't provide a legacy IRQ.
+ /*
+ * The xHCI driver has its own irq management
+ * make sure irq setup is not touched for xhci in generic hcd code
*/
- if (!dev->irq && (driver->flags & HCD_MASK) != HCD_USB3) {
- dev_err(&dev->dev,
- "Found HC with no IRQ. Check BIOS/PCI %s setup!\n",
- pci_name(dev));
- retval = -ENODEV;
- goto disable_pci;
+ if ((driver->flags & HCD_MASK) != HCD_USB3) {
+ if (!dev->irq) {
+ dev_err(&dev->dev,
+ "Found HC with no IRQ. Check BIOS/PCI %s setup!\n",
+ pci_name(dev));
+ retval = -ENODEV;
+ goto disable_pci;
+ }
+ hcd_irq = dev->irq;
}
hcd = usb_create_hcd(driver, &dev->dev, pci_name(dev));
@@ -245,7 +250,7 @@ int usb_hcd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
pci_set_master(dev);
- retval = usb_add_hcd(hcd, dev->irq, IRQF_SHARED);
+ retval = usb_add_hcd(hcd, hcd_irq, IRQF_SHARED);
if (retval != 0)
goto unmap_registers;
set_hs_companion(dev, hcd);
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index f1f01a8..849470b 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -350,7 +350,7 @@ static int xhci_try_enable_msi(struct usb_hcd *hcd)
* generate interrupts. Don't even try to enable MSI.
*/
if (xhci->quirks & XHCI_BROKEN_MSI)
- return 0;
+ goto legacy_irq;
/* unregister the legacy interrupt */
if (hcd->irq)
@@ -371,6 +371,7 @@ static int xhci_try_enable_msi(struct usb_hcd *hcd)
return -EINVAL;
}
+ legacy_irq:
/* fall back to legacy interrupt*/
ret = request_irq(pdev->irq, &usb_hcd_irq, IRQF_SHARED,
hcd->irq_descr, hcd);
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists