[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1362464277.1111.3.camel@phoenix>
Date: Tue, 05 Mar 2013 14:17:57 +0800
From: Axel Lin <axel.lin@...ics.com>
To: Mark Brown <broonie@...nsource.wolfsonmicro.com>
Cc: Haojian Zhuang <haojian.zhuang@...il.com>,
"Jett.Zhou" <jtzhou@...vell.com>,
Liam Girdwood <lgirdwood@...il.com>,
linux-kernel@...r.kernel.org
Subject: [PATCH RESEND 3/3] regulator: max8649: Use enable_is_inverted flag
with regulator_enable_regmap and friends APIs
Signed-off-by: Axel Lin <axel.lin@...ics.com>
Reviewed-by: Haojian Zhuang <haojian.zhuang@...il.com>
---
drivers/regulator/max8649.c | 39 ++++++---------------------------------
1 file changed, 6 insertions(+), 33 deletions(-)
diff --git a/drivers/regulator/max8649.c b/drivers/regulator/max8649.c
index 3ca1438..fdb67ff 100644
--- a/drivers/regulator/max8649.c
+++ b/drivers/regulator/max8649.c
@@ -60,36 +60,6 @@ struct max8649_regulator_info {
unsigned ramp_down:1;
};
-/* EN_PD means pulldown on EN input */
-static int max8649_enable(struct regulator_dev *rdev)
-{
- struct max8649_regulator_info *info = rdev_get_drvdata(rdev);
- return regmap_update_bits(info->regmap, MAX8649_CONTROL, MAX8649_EN_PD, 0);
-}
-
-/*
- * Applied internal pulldown resistor on EN input pin.
- * If pulldown EN pin outside, it would be better.
- */
-static int max8649_disable(struct regulator_dev *rdev)
-{
- struct max8649_regulator_info *info = rdev_get_drvdata(rdev);
- return regmap_update_bits(info->regmap, MAX8649_CONTROL, MAX8649_EN_PD,
- MAX8649_EN_PD);
-}
-
-static int max8649_is_enabled(struct regulator_dev *rdev)
-{
- struct max8649_regulator_info *info = rdev_get_drvdata(rdev);
- unsigned int val;
- int ret;
-
- ret = regmap_read(info->regmap, MAX8649_CONTROL, &val);
- if (ret != 0)
- return ret;
- return !((unsigned char)val & MAX8649_EN_PD);
-}
-
static int max8649_enable_time(struct regulator_dev *rdev)
{
struct max8649_regulator_info *info = rdev_get_drvdata(rdev);
@@ -151,9 +121,9 @@ static struct regulator_ops max8649_dcdc_ops = {
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.list_voltage = regulator_list_voltage_linear,
.map_voltage = regulator_map_voltage_linear,
- .enable = max8649_enable,
- .disable = max8649_disable,
- .is_enabled = max8649_is_enabled,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
.enable_time = max8649_enable_time,
.set_mode = max8649_set_mode,
.get_mode = max8649_get_mode,
@@ -169,6 +139,9 @@ static struct regulator_desc dcdc_desc = {
.vsel_mask = MAX8649_VOL_MASK,
.min_uV = MAX8649_DCDC_VMIN,
.uV_step = MAX8649_DCDC_STEP,
+ .enable_reg = MAX8649_CONTROL,
+ .enable_mask = MAX8649_EN_PD,
+ .enable_is_inverted = true,
};
static struct regmap_config max8649_regmap_config = {
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists