linux-kernel - Re: 3.9-rc1: crash kernel panic - not syncing: Can not allocate SWIOTLB buffer earlier and can't now provide you with the DMA bounce buffer

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Fri, 08 Mar 2013 16:52:06 +0900
From:	Takao Indoh <indou.takao@...fujitsu.com>
To:	chaowang@...hat.com
CC:	yinghai@...nel.org, caiqian@...hat.com,
	linux-kernel@...r.kernel.org, kexec@...ts.infradead.org,
	dyoung@...hat.com, vgoyal@...hat.com, hpa@...ux.intel.com
Subject: Re: 3.9-rc1: crash kernel panic - not syncing: Can not allocate SWIOTLB
 buffer earlier and can't now provide you with the DMA bounce buffer

(2013/03/08 16:33), WANG Chao wrote:
> On 03/08/2013 03:27 PM, Yinghai Lu wrote:
>> On Thu, Mar 7, 2013 at 11:20 PM, WANG Chao <chaowang@...hat.com> wrote:
>>>>
>>>> looks like your system DO have DMAR table, please enable dmar
>>>> remapping in your kernel config.
>>>
>>> I've already got following config:
>>> CONFIG_DMAR_TABLE=y
>>> CONFIG_INTEL_IOMMU=y
>>> CONFIG_IRQ_REMAP=y
>>>
>>> but I don't have intel_iommu=on in kernel cmdline. IIRC, iommu will prevent
>>> 2nd kernel from booting ...
>>
>> Did you put intel_iommu=on on first and second cpu both?
>
> I tried, 2nd kernel didn't boot and keep splitting errors like these:
> [    2.106939] DMAR: No ATSR found
> [    2.110121] IOMMU 0 0xfed90000: using Queued invalidation
> [    2.115522] IOMMU 1 0xfed91000: using Queued invalidation
> [    2.120919] IOMMU: Setting RMRR:
> [    2.124162] IOMMU: Setting identity map for device 0000:00:02.0 [0xab800000
> - 0xaf9fffff]
> [    2.133099] IOMMU: Setting identity map for device 0000:00:1d.0 [0xaac95000
> - 0xaacb2fff]
> [    2.141305] IOMMU: Setting identity map for device 0000:00:1a.0 [0xaac95000
> - 0xaacb2fff]
> [    2.149503] IOMMU: Setting identity map for device 0000:00:14.0 [0xaac95000
> - 0xaacb2fff]
> [    2.157690] IOMMU: Prepare 0-16MiB unity mapping for LPC
> [    2.163011] IOMMU: Setting identity map for device 0000:00:1f.0 [0x0 - 0xffffff
> [Errors, here we go]
> [    2.170932] dmar: DRHD: handling fault status reg 3
> [    2.170933] PCI-DMA: Intel(R) Virtualization Technology for Directed I/O
> [    2.182486] dmar: DMAR:[DMA Write] Request device [00:02.0] fault addr ffffe000
> [    2.182486] DMAR:[fault reason 05] PTE Write access is not set
> [    2.195705] dmar: DRHD: handling fault status reg 3
> [    2.200570] dmar: DMAR:[DMA Read] Request device [00:02.0] fault addr ff873000
> [    2.200570] DMAR:[fault reason 06] PTE Read access is not set
> [    2.213618] dmar: DRHD: handling fault status reg 3
> [..]

This is the problem I'm working on.
https://lkml.org/lkml/2012/11/26/814

Thansk,
Takao Indoh

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/