[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <513F089B.5080004@ti.com>
Date: Tue, 12 Mar 2013 16:21:07 +0530
From: kishon <kishon@...com>
To: Roger Quadros <rogerq@...com>
CC: <gregkh@...uxfoundation.org>, <stern@...land.harvard.edu>,
<balbi@...com>, <b-cousson@...com>, <mark.rutland@....com>,
<linux-kernel@...r.kernel.org>, <linux-usb@...r.kernel.org>,
<linux-omap@...r.kernel.org>, <devicetree-discuss@...ts.ozlabs.org>
Subject: Re: [PATCH 12/12] USB: ehci-omap: Fix detection in HSIC mode
Hi,
On Tuesday 12 March 2013 04:14 PM, Roger Quadros wrote:
> The HSIC devices need to be kept in reset while the EHCI controller
> is being initialized and only brought out of reset after the
> initialization is complete, else HSIC devices will not be detected.
>
> Signed-off-by: Roger Quadros <rogerq@...com>
> CC: Alan Stern <stern@...land.harvard.edu>
> ---
> drivers/usb/host/ehci-omap.c | 28 +++++++++++-----------------
> 1 files changed, 11 insertions(+), 17 deletions(-)
>
> diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c
> index 1ba1df8..52a2d46 100644
> --- a/drivers/usb/host/ehci-omap.c
> +++ b/drivers/usb/host/ehci-omap.c
> @@ -50,6 +50,7 @@
> #include <linux/usb/hcd.h>
> #include <linux/of.h>
> #include <linux/dma-mapping.h>
> +#include <linux/delay.h>
not needed here I guess.
>
> #include "ehci.h"
>
> @@ -90,26 +91,13 @@ static inline u32 ehci_read(void __iomem *base, u32 reg)
> static int omap_ehci_init(struct usb_hcd *hcd)
> {
> struct ehci_hcd *ehci = hcd_to_ehci(hcd);
> - struct omap_hcd *omap = (struct omap_hcd *)ehci->priv;
> - int rc, i;
> -
> - /* Hold PHYs in reset while initializing EHCI controller */
> - for (i = 0; i < omap->nports; i++) {
> - if (omap->phy[i])
> - usb_phy_shutdown(omap->phy[i]);
> - }
> + int rc;
>
> /* we know this is the memory we want, no need to ioremap again */
> ehci->caps = hcd->regs;
>
> rc = ehci_setup(hcd);
>
> - /* Bring PHYs out of reset */
> - for (i = 0; i < omap->nports; i++) {
> - if (omap->phy[i])
> - usb_phy_init(omap->phy[i]);
> - }
> -
> return rc;
> }
>
> @@ -219,9 +207,6 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev)
> }
>
> omap->phy[i] = phy;
> - usb_phy_init(omap->phy[i]);
> - /* bring PHY out of suspend */
> - usb_phy_set_suspend(omap->phy[i], 0);
> }
>
> pm_runtime_enable(dev);
> @@ -245,6 +230,15 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev)
> goto err_pm_runtime;
> }
>
> + /* Bring PHYs out of reset */
> + for (i = 0; i < omap->nports; i++) {
> + if (!omap->phy[i])
> + continue;
> +
> + usb_phy_init(omap->phy[i]);
> + /* bring PHY out of suspend */
> + usb_phy_set_suspend(omap->phy[i], 0);
> + }
But isn't HSIC supposed to be PHYless devices. Maybe a comment
explaining it might be helpful.
Thanks
Kishon
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists