linux-kernel - [PATCH 8/8] USB: phy: nop: Defer probe if device needs VCC/RESET

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <1363087466-32444-9-git-send-email-rogerq@ti.com>
Date:	Tue, 12 Mar 2013 13:24:26 +0200
From:	Roger Quadros <rogerq@...com>
To:	<balbi@...com>
CC:	<tony@...mide.com>, <mark.rutland@....com>, <mkl@...gutronix.de>,
	<linux-kernel@...r.kernel.org>, <linux-usb@...r.kernel.org>,
	<linux-omap@...r.kernel.org>,
	<devicetree-discuss@...ts.ozlabs.org>, <rogerq@...com>
Subject: [PATCH 8/8] USB: phy: nop: Defer probe if device needs VCC/RESET

Add 2 flags, needs_vcc and needs_reset to platform data.
If the flag is set and the regulator couldn't be found
then we bail out with -EPROBE_DEFER.

For device tree boot we depend on presensce of vcc-supply/
reset-supply properties to decide if we should bail out
with -EPROBE_DEFER or just continue in case the regulator
can't be found.

This is required for proper functionality in cases where the
regulator is needed but is probed later than the PHY device.

Signed-off-by: Roger Quadros <rogerq@...com>
Acked-by: Felipe Balbi <balbi@...com>
---
 drivers/usb/otg/nop-usb-xceiv.c |   11 +++++++++++
 1 files changed, 11 insertions(+), 0 deletions(-)

diff --git a/drivers/usb/otg/nop-usb-xceiv.c b/drivers/usb/otg/nop-usb-xceiv.c
index b26b1c2..2b10cc9 100644
--- a/drivers/usb/otg/nop-usb-xceiv.c
+++ b/drivers/usb/otg/nop-usb-xceiv.c
@@ -147,6 +147,8 @@ static int nop_usb_xceiv_probe(struct platform_device *pdev)
 	enum usb_phy_type	type = USB_PHY_TYPE_USB2;
 	int err;
 	u32 clk_rate = 0;
+	bool needs_vcc = false;
+	bool needs_reset = false;
 
 	nop = devm_kzalloc(&pdev->dev, sizeof(*nop), GFP_KERNEL);
 	if (!nop)
@@ -163,9 +165,14 @@ static int nop_usb_xceiv_probe(struct platform_device *pdev)
 		if (of_property_read_u32(node, "clock-frequency", &clk_rate))
 			clk_rate = 0;
 
+		needs_vcc = of_property_read_bool(node, "vcc-supply");
+		needs_reset = of_property_read_bool(node, "reset-supply");
+
 	} else if (pdata) {
 		type = pdata->type;
 		clk_rate = pdata->clk_rate;
+		needs_vcc = pdata->needs_vcc;
+		needs_reset = pdata->needs_reset;
 	}
 
 	nop->clk = devm_clk_get(&pdev->dev, "main_clk");
@@ -194,12 +201,16 @@ static int nop_usb_xceiv_probe(struct platform_device *pdev)
 	if (IS_ERR(nop->vcc)) {
 		dev_dbg(&pdev->dev, "Error getting vcc regulator: %ld\n",
 					PTR_ERR(nop->vcc));
+		if (needs_vcc)
+			return -EPROBE_DEFER;
 	}
 
 	nop->reset = devm_regulator_get(&pdev->dev, "reset");
 	if (IS_ERR(nop->reset)) {
 		dev_dbg(&pdev->dev, "Error getting reset regulator: %ld\n",
 					PTR_ERR(nop->reset));
+		if (needs_reset)
+			return -EPROBE_DEFER;
 	}
 
 	nop->dev		= &pdev->dev;
-- 
1.7.4.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/