[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1363088606-2692-2-git-send-email-rogerq@ti.com>
Date: Tue, 12 Mar 2013 13:43:03 +0200
From: Roger Quadros <rogerq@...com>
To: <tony@...mide.com>
CC: <balbi@...com>, <b-cousson@...com>, <linux-kernel@...r.kernel.org>,
<linux-usb@...r.kernel.org>, <linux-omap@...r.kernel.org>,
<devicetree-discuss@...ts.ozlabs.org>, <rogerq@...com>
Subject: [PATCH 01/24] usb: phy: nop: Add some parameters to platform data
Add clk_rate parameter to platform data. If supplied, the
NOP phy driver will program the clock to that rate during probe.
Also add 2 flags, needs_vcc and needs_reset.
If the flag is set and the regulator couldn't be found
then the driver will bail out with -EPROBE_DEFER.
Signed-off-by: Roger Quadros <rogerq@...com>
Acked-by: Felipe Balbi <balbi@...com>
---
include/linux/usb/nop-usb-xceiv.h | 5 +++++
1 files changed, 5 insertions(+), 0 deletions(-)
diff --git a/include/linux/usb/nop-usb-xceiv.h b/include/linux/usb/nop-usb-xceiv.h
index 28884c7..148d351 100644
--- a/include/linux/usb/nop-usb-xceiv.h
+++ b/include/linux/usb/nop-usb-xceiv.h
@@ -5,6 +5,11 @@
struct nop_usb_xceiv_platform_data {
enum usb_phy_type type;
+ unsigned long clk_rate;
+
+ /* if set fails with -EPROBE_DEFER if can't get regulator */
+ unsigned int needs_vcc:1;
+ unsigned int needs_reset:1;
};
#if defined(CONFIG_NOP_USB_XCEIV) || (defined(CONFIG_NOP_USB_XCEIV_MODULE) && defined(MODULE))
--
1.7.4.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists