lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20130315100105.GA4889@quack.suse.cz>
Date:	Fri, 15 Mar 2013 11:01:05 +0100
From:	Jan Kara <jack@...e.cz>
To:	"Darrick J. Wong" <darrick.wong@...cle.com>
Cc:	Jan Kara <jack@...e.cz>, Andrew Morton <akpm@...ux-foundation.org>,
	Shuge <shugelinux@...il.com>, linux-kernel@...r.kernel.org,
	linux-mm@...ck.org, linux-ext4@...r.kernel.org,
	Kevin <kevin@...winneretch.com>, Theodore Ts'o <tytso@....edu>,
	Jens Axboe <axboe@...nel.dk>,
	Catalin Marinas <catalin.marinas@....com>,
	Will Deacon <will.deacon@....com>,
	linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH] bounce:fix bug, avoid to flush dcache on slab page
 from jbd2.

On Thu 14-03-13 15:42:43, Darrick J. Wong wrote:
> On Wed, Mar 13, 2013 at 10:02:16PM +0100, Jan Kara wrote:
> > On Wed 13-03-13 12:44:29, Darrick J. Wong wrote:
> > > On Wed, Mar 13, 2013 at 09:50:21AM +0100, Jan Kara wrote:
> > > > On Tue 12-03-13 18:10:20, Darrick J. Wong wrote:
> > > > > On Tue, Mar 12, 2013 at 03:32:21PM -0700, Andrew Morton wrote:
> > > > > > On Fri, 08 Mar 2013 20:37:36 +0800 Shuge <shugelinux@...il.com> wrote:
> > > > > > 
> > > > > > > The bounce accept slab pages from jbd2, and flush dcache on them.
> > > > > > > When enabling VM_DEBUG, it will tigger VM_BUG_ON in page_mapping().
> > > > > > > So, check PageSlab to avoid it in __blk_queue_bounce().
> > > > > > > 
> > > > > > > Bug URL: http://lkml.org/lkml/2013/3/7/56
> > > > > > > 
> > > > > > > ...
> > > > > > >
> > > > > > > --- a/mm/bounce.c
> > > > > > > +++ b/mm/bounce.c
> > > > > > > @@ -214,7 +214,8 @@ static void __blk_queue_bounce(struct request_queue 
> > > > > > > *q, struct bio **bio_orig,
> > > > > > >   		if (rw == WRITE) {
> > > > > > >   			char *vto, *vfrom;
> > > > > > >   -			flush_dcache_page(from->bv_page);
> > > > > > > +			if (unlikely(!PageSlab(from->bv_page)))
> > > > > > > +				flush_dcache_page(from->bv_page);
> > > > > > >   			vto = page_address(to->bv_page) + to->bv_offset;
> > > > > > >   			vfrom = kmap(from->bv_page) + from->bv_offset;
> > > > > > >   			memcpy(vto, vfrom, to->bv_len);
> > > > > > 
> > > > > > I guess this is triggered by Catalin's f1a0c4aa0937975b ("arm64: Cache
> > > > > > maintenance routines"), which added a page_mapping() call to arm64's
> > > > > > arch/arm64/mm/flush.c:flush_dcache_page().
> > > > > > 
> > > > > > What's happening is that jbd2 is using kmalloc() to allocate buffer_head
> > > > > > data.  That gets submitted down the BIO layer and __blk_queue_bounce()
> > > > > > calls flush_dcache_page() which in the arm64 case calls page_mapping()
> > > > > > and page_mapping() does VM_BUG_ON(PageSlab) and splat.
> > > > > > 
> > > > > > The unusual thing about all of this is that the payload for some disk
> > > > > > IO is coming from kmalloc, rather than being a user page.  It's oddball
> > > > > > but we've done this for ages and should continue to support it.
> > > > > > 
> > > > > > 
> > > > > > Now, the page from kmalloc() cannot be in highmem, so why did the
> > > > > > bounce code decide to bounce it?
> > > > > > 
> > > > > > __blk_queue_bounce() does
> > > > > > 
> > > > > > 		/*
> > > > > > 		 * is destination page below bounce pfn?
> > > > > > 		 */
> > > > > > 		if (page_to_pfn(page) <= queue_bounce_pfn(q) && !force)
> > > > > > 			continue;
> > > > > > 
> > > > > > and `force' comes from must_snapshot_stable_pages().  But
> > > > > > must_snapshot_stable_pages() must have returned false, because if it
> > > > > > had returned true then it would have been must_snapshot_stable_pages()
> > > > > > which went BUG, because must_snapshot_stable_pages() calls page_mapping().
> > > > > > 
> > > > > > So my tentative diagosis is that arm64 is fishy.  A page which was
> > > > > > allocated via jbd2_alloc(GFP_NOFS)->kmem_cache_alloc() ended up being
> > > > > > above arm64's queue_bounce_pfn().  Can you please do a bit of
> > > > > > investigation to work out if this is what is happening?  Find out why
> > > > > > __blk_queue_bounce() decided to bounce a page which shouldn't have been
> > > > > > bounced?
> > > > > 
> > > > > That sure is strange.  I didn't see any obvious reasons why we'd end up with a
> > > > > kmalloc above queue_bounce_pfn().  But then I don't have any arm64s either.
> > > > > 
> > > > > > This is all terribly fragile :( afaict if someone sets
> > > > > > bdi_cap_stable_pages_required() against that jbd2 queue, we're going to
> > > > > > hit that BUG_ON() again, via must_snapshot_stable_pages()'s
> > > > > > page_mapping() call.  (Darrick, this means you ;))
> > > > > 
> > > > > Wheeee.  You're right, we shouldn't be calling page_mapping on slab pages.
> > > > > We can keep walking the bio segments to find a non-slab page that can tell us
> > > > > MS_SNAP_STABLE is set, since we probably won't need the bounce buffer anyway.
> > > > > 
> > > > > How does something like this look?  (+ the patch above)
> > > >   Umm, this won't quite work. We can have a bio which has just PageSlab
> > > > page attached and so you won't be able to get to the superblock. Heh, isn't
> > > > the whole page_mapping() thing in must_snapshot_stable_pages() wrong? When we
> > > > do direct IO, these pages come directly from userspace and hell knows where
> > > > they come from. Definitely their page_mapping() doesn't give us anything
> > > > useful... Sorry for not realizing this earlier when reviewing the patch.
> > > > 
> > > > ... remembering why we need to get to sb and why ext3 needs this ... So
> > > > maybe a better solution would be to have a bio flag meaning that pages need
> > > > bouncing? And we would set it from filesystems that need it - in case of
> > > > ext3 only writeback of data from kjournald actually needs to bounce the
> > > > pages. Thoughts?
> > > 
> > > What about dirty pages that don't result in journal transactions?  I think
> > > ext3_sync_file() eventually calls ext3_ordered_writepage, which then calls
> > > __block_write_full_page, which in turn calls submit_bh().
> >   So here we have two options:
> > Either we let ext3 wait the same way as other filesystems when stable pages
> > are required. Then only data IO from kjournald needs to be bounced (all
> > other IO is properly protected by PageWriteback bit).
> > 
> > Or we won't let ext3 wait (as it is now), keep the superblock flag that fs
> > needs bouncing, and set the bio flag in __block_write_full_page() and
> > kjournald based on the sb flag.
> > 
> > I think the first option is slightly better but I don't feel strongly
> > about that.
> 
> I like that first option -- it contains the kludgery to jbd instead of
> spreading it around.  Here's a patch that passes a quick smoke test on ext[34],
> xfs, and vfat.  What do you think of this one?  Should I create a
> submit_snapshot_bh() instead of letting callers stuff in arbitrary dangerous
> BH_ flags?
  Thanks for writing the patch. I think _submit_bh() is OK as you did it. I
have just two comments below.

> ---
> From: Darrick J. Wong <darrick.wong@...cle.com>
> Subject: [PATCH] mm: Make snapshotting pages for stable writes a per-bio operation
> 
> Walking a bio's page mappings has proved problematic, so create a new bio flag
> to indicate that a bio's data needs to be snapshotted in order to guarantee
> stable pages during writeback.  Next, for the one user (ext3/jbd) of
> snapshotting, hook all the places where writes can be initiated without
> PG_writeback set, and set BIO_SNAP_STABLE there.  Finally, the MS_SNAP_STABLE
> mount flag (only used by ext3) is now superfluous, so get rid of it.
> 
> Signed-off-by: Darrick J. Wong <darrick.wong@...cle.com>
> ---
>  fs/buffer.c                 |    9 ++++++++-
>  fs/ext3/super.c             |    1 -
>  fs/jbd/commit.c             |    4 ++--
>  include/linux/blk_types.h   |    3 ++-
>  include/linux/buffer_head.h |    1 +
>  include/uapi/linux/fs.h     |    1 -
>  mm/bounce.c                 |   21 +--------------------
>  mm/page-writeback.c         |    4 ----
>  8 files changed, 14 insertions(+), 30 deletions(-)
> 
...
> diff --git a/fs/jbd/commit.c b/fs/jbd/commit.c
> index 86b39b1..b91b688 100644
> --- a/fs/jbd/commit.c
> +++ b/fs/jbd/commit.c
> @@ -163,7 +163,7 @@ static void journal_do_submit_data(struct buffer_head **wbuf, int bufs,
>  	for (i = 0; i < bufs; i++) {
>  		wbuf[i]->b_end_io = end_buffer_write_sync;
>  		/* We use-up our safety reference in submit_bh() */
> -		submit_bh(write_op, wbuf[i]);
> +		_submit_bh(write_op, wbuf[i], 1 << BIO_SNAP_STABLE);
  Please add a comment here why we need BIO_SNAP_STABLE. Something like:
/*
 * Here we write back pagecache data that may be mmaped. Since we cannot
 * afford to clean the page and set PageWriteback here due to lock ordering
 * (page lock ranks above transaction start), the data can change while IO is
 * in flight. Tell the block layer it should bounce the bio pages if stable
 * data during write is required.
 */

>  	}
>  }
>  
> @@ -667,7 +667,7 @@ start_journal_io:
>  				clear_buffer_dirty(bh);
>  				set_buffer_uptodate(bh);
>  				bh->b_end_io = journal_end_buffer_io_sync;
> -				submit_bh(write_op, bh);
> +				_submit_bh(write_op, bh, 1 << BIO_SNAP_STABLE);
  And this isn't needed. Here we write out only metadata and JBD already
handles copying those / waiting for IO in flight for metadata.

The rest of the patch looks OK and I like it much more than the previous
version :)

									Honza
>  			}
>  			cond_resched();
>  
> diff --git a/include/linux/blk_types.h b/include/linux/blk_types.h
> index cdf1119..22990cf 100644
> --- a/include/linux/blk_types.h
> +++ b/include/linux/blk_types.h
> @@ -111,12 +111,13 @@ struct bio {
>  #define BIO_FS_INTEGRITY 9	/* fs owns integrity data, not block layer */
>  #define BIO_QUIET	10	/* Make BIO Quiet */
>  #define BIO_MAPPED_INTEGRITY 11/* integrity metadata has been remapped */
> +#define BIO_SNAP_STABLE	12	/* bio data must be snapshotted during write */
>  
>  /*
>   * Flags starting here get preserved by bio_reset() - this includes
>   * BIO_POOL_IDX()
>   */
> -#define BIO_RESET_BITS	12
> +#define BIO_RESET_BITS	13
>  
>  #define bio_flagged(bio, flag)	((bio)->bi_flags & (1 << (flag)))
>  
> diff --git a/include/linux/buffer_head.h b/include/linux/buffer_head.h
> index 5afc4f9..714d5d9 100644
> --- a/include/linux/buffer_head.h
> +++ b/include/linux/buffer_head.h
> @@ -181,6 +181,7 @@ void ll_rw_block(int, int, struct buffer_head * bh[]);
>  int sync_dirty_buffer(struct buffer_head *bh);
>  int __sync_dirty_buffer(struct buffer_head *bh, int rw);
>  void write_dirty_buffer(struct buffer_head *bh, int rw);
> +int _submit_bh(int, struct buffer_head *, unsigned long);
>  int submit_bh(int, struct buffer_head *);
>  void write_boundary_block(struct block_device *bdev,
>  			sector_t bblock, unsigned blocksize);
> diff --git a/include/uapi/linux/fs.h b/include/uapi/linux/fs.h
> index c7fc1e6..a4ed56c 100644
> --- a/include/uapi/linux/fs.h
> +++ b/include/uapi/linux/fs.h
> @@ -88,7 +88,6 @@ struct inodes_stat_t {
>  #define MS_STRICTATIME	(1<<24) /* Always perform atime updates */
>  
>  /* These sb flags are internal to the kernel */
> -#define MS_SNAP_STABLE	(1<<27) /* Snapshot pages during writeback, if needed */
>  #define MS_NOSEC	(1<<28)
>  #define MS_BORN		(1<<29)
>  #define MS_ACTIVE	(1<<30)
> diff --git a/mm/bounce.c b/mm/bounce.c
> index 5f89017..a5c2ec3 100644
> --- a/mm/bounce.c
> +++ b/mm/bounce.c
> @@ -181,32 +181,13 @@ static void bounce_end_io_read_isa(struct bio *bio, int err)
>  #ifdef CONFIG_NEED_BOUNCE_POOL
>  static int must_snapshot_stable_pages(struct request_queue *q, struct bio *bio)
>  {
> -	struct page *page;
> -	struct backing_dev_info *bdi;
> -	struct address_space *mapping;
> -	struct bio_vec *from;
> -	int i;
> -
>  	if (bio_data_dir(bio) != WRITE)
>  		return 0;
>  
>  	if (!bdi_cap_stable_pages_required(&q->backing_dev_info))
>  		return 0;
>  
> -	/*
> -	 * Based on the first page that has a valid mapping, decide whether or
> -	 * not we have to employ bounce buffering to guarantee stable pages.
> -	 */
> -	bio_for_each_segment(from, bio, i) {
> -		page = from->bv_page;
> -		mapping = page_mapping(page);
> -		if (!mapping)
> -			continue;
> -		bdi = mapping->backing_dev_info;
> -		return mapping->host->i_sb->s_flags & MS_SNAP_STABLE;
> -	}
> -
> -	return 0;
> +	return test_bit(BIO_SNAP_STABLE, &bio->bi_flags);
>  }
>  #else
>  static int must_snapshot_stable_pages(struct request_queue *q, struct bio *bio)
> diff --git a/mm/page-writeback.c b/mm/page-writeback.c
> index efe6814..4514ad7 100644
> --- a/mm/page-writeback.c
> +++ b/mm/page-writeback.c
> @@ -2311,10 +2311,6 @@ void wait_for_stable_page(struct page *page)
>  
>  	if (!bdi_cap_stable_pages_required(bdi))
>  		return;
> -#ifdef CONFIG_NEED_BOUNCE_POOL
> -	if (mapping->host->i_sb->s_flags & MS_SNAP_STABLE)
> -		return;
> -#endif /* CONFIG_NEED_BOUNCE_POOL */
>  
>  	wait_on_page_writeback(page);
>  }
-- 
Jan Kara <jack@...e.cz>
SUSE Labs, CR
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ