| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 15 Mar 2013 17:16:23 +0200
From: Roger Quadros <rogerq@...com>
To: <tony@...mide.com>
CC: <balbi@...com>, <linux-omap@...r.kernel.org>,
<linux-usb@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<devicetree-discuss@...ts.ozlabs.org>, <rogerq@...com>
Subject: [PATCH v2 02/23] ARM: OMAP2+: omap-usb-host: Add usbhs_init_phys()
This helper allows board support code to add the PHY's
VCC and RESET regulators which are GPIO controlled.
It also links the "vcc" and "reset" supplies to the
PHY's device ID that is supplied in the struct usbhs_phy_data
argument.
Signed-off-by: Roger Quadros <rogerq@...com>
---
arch/arm/mach-omap2/usb-host.c | 138 +++++++++++++++++++++++++++++++++++++++-
arch/arm/mach-omap2/usb.h | 9 +++
2 files changed, 145 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-omap2/usb-host.c b/arch/arm/mach-omap2/usb-host.c
index 5706bdc..e788fe5 100644
--- a/arch/arm/mach-omap2/usb-host.c
+++ b/arch/arm/mach-omap2/usb-host.c
@@ -22,8 +22,11 @@
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/dma-mapping.h>
-
-#include <asm/io.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/fixed.h>
+#include <linux/string.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
#include "soc.h"
#include "omap_device.h"
@@ -526,3 +529,134 @@ void __init usbhs_init(struct usbhs_omap_platform_data *pdata)
}
#endif
+
+static const char *reset_supply = "reset";
+static const char *vcc_supply = "vcc";
+
+/* Template for PHY regulators */
+static struct regulator_consumer_supply hsusb_reg_supplies[] = {
+ { /* .supply & .dev_name filled later */ },
+};
+
+static struct regulator_init_data hsusb_reg_data = {
+ .constraints = {
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ .consumer_supplies = hsusb_reg_supplies,
+ .num_consumer_supplies = ARRAY_SIZE(hsusb_reg_supplies),
+};
+
+static struct fixed_voltage_config hsusb_reg_config = {
+ /* .supply_name filled later */
+ .microvolts = 3300000,
+ .gpio = -1, /* updated later */
+ .startup_delay = 70000, /* 70msec */
+ .enable_high = 1, /* updated later */
+ .enabled_at_boot = 0, /* keep in RESET */
+ /* .init_data filled later */
+};
+
+static struct platform_device_info hsusb_reg_pdev_info = {
+ .name = "reg-fixed-voltage",
+ .id = PLATFORM_DEVID_AUTO,
+};
+
+int usbhs_init_phys(struct usbhs_phy_data *phy, int num_phys)
+{
+ struct regulator_consumer_supply *supplies;
+ struct regulator_init_data *reg_data;
+ struct fixed_voltage_config *config;
+ char *supply_name;
+ int i;
+
+ for (i = 0; i < num_phys; i++) {
+
+ if (!phy->phy_id || !phy->port) {
+ pr_info("%s: Invalid phy_id or port\n", __func__);
+ continue;
+ }
+
+ if (!gpio_is_valid(phy->reset_gpio))
+ goto check_vcc;
+
+ supplies = kmemdup(hsusb_reg_supplies,
+ ARRAY_SIZE(hsusb_reg_supplies) *
+ sizeof(struct regulator_consumer_supply),
+ GFP_KERNEL);
+ if (!supplies)
+ return -ENOMEM;
+
+ supplies->supply = reset_supply;
+ supplies->dev_name = phy->phy_id;
+
+ reg_data = kmemdup(&hsusb_reg_data, sizeof(hsusb_reg_data),
+ GFP_KERNEL);
+ if (!reg_data)
+ return -ENOMEM;
+
+ reg_data->consumer_supplies = supplies;
+
+ config = kmemdup(&hsusb_reg_config, sizeof(hsusb_reg_config),
+ GFP_KERNEL);
+ if (!config)
+ return -ENOMEM;
+
+ supply_name = kmalloc(14, GFP_KERNEL);
+ if (!supply_name)
+ return -ENOMEM;
+
+ scnprintf(supply_name, 13, "hsusb%d_reset", phy->port);
+ config->supply_name = supply_name;
+ config->gpio = phy->reset_gpio;
+ config->init_data = reg_data;
+
+ hsusb_reg_pdev_info.data = config;
+ hsusb_reg_pdev_info.size_data = sizeof(hsusb_reg_config);
+ platform_device_register_full(&hsusb_reg_pdev_info);
+
+check_vcc:
+ if (!gpio_is_valid(phy->vcc_gpio))
+ goto next;
+
+ supplies = kmemdup(hsusb_reg_supplies,
+ ARRAY_SIZE(hsusb_reg_supplies) *
+ sizeof(struct regulator_consumer_supply),
+ GFP_KERNEL);
+ if (!supplies)
+ return -ENOMEM;
+
+ supplies->supply = vcc_supply;
+ supplies->dev_name = phy->phy_id;
+
+ reg_data = kmemdup(&hsusb_reg_data, sizeof(hsusb_reg_data),
+ GFP_KERNEL);
+ if (!reg_data)
+ return -ENOMEM;
+
+ reg_data->consumer_supplies = supplies;
+
+ config = kmemdup(&hsusb_reg_config, sizeof(hsusb_reg_config),
+ GFP_KERNEL);
+ if (!config)
+ return -ENOMEM;
+
+ supply_name = kmalloc(14, GFP_KERNEL);
+ if (!supply_name)
+ return -ENOMEM;
+
+ scnprintf(supply_name, 13, "hsusb%d_vcc", phy->port);
+ config->supply_name = supply_name;
+ config->gpio = phy->vcc_gpio;
+ config->enable_high = phy->vcc_polarity;
+ config->init_data = reg_data;
+
+ hsusb_reg_pdev_info.data = config;
+ hsusb_reg_pdev_info.size_data = sizeof(hsusb_reg_config);
+ platform_device_register_full(&hsusb_reg_pdev_info);
+
+next:
+ phy++;
+ }
+
+ return 0;
+}
diff --git a/arch/arm/mach-omap2/usb.h b/arch/arm/mach-omap2/usb.h
index 3319f5c..4c21863 100644
--- a/arch/arm/mach-omap2/usb.h
+++ b/arch/arm/mach-omap2/usb.h
@@ -53,8 +53,17 @@
#define USBPHY_OTGSESSEND_EN (1 << 20)
#define USBPHY_DATA_POLARITY (1 << 23)
+struct usbhs_phy_data {
+ int port; /* 1 indexed port number */
+ int reset_gpio;
+ int vcc_gpio;
+ bool vcc_polarity; /* 1 active high, 0 active low */
+ char *phy_id;
+};
+
extern void usb_musb_init(struct omap_musb_board_data *board_data);
extern void usbhs_init(struct usbhs_omap_platform_data *pdata);
+extern int usbhs_init_phys(struct usbhs_phy_data *phy, int num_phys);
extern void am35x_musb_reset(void);
extern void am35x_musb_phy_power(u8 on);
--
1.7.4.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists