[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1363770725-13717-6-git-send-email-kishon@ti.com>
Date: Wed, 20 Mar 2013 14:42:04 +0530
From: Kishon Vijay Abraham I <kishon@...com>
To: <balbi@...com>, <gregkh@...uxfoundation.org>, <arnd@...db.de>,
<akpm@...ux-foundation.org>, <rob@...dley.net>
CC: <davem@...emloft.net>, <cesarb@...arb.net>,
<linux-usb@...r.kernel.org>, <linux-omap@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <tony@...mide.com>,
<grant.likely@...retlab.ca>, <rob.herring@...xeda.com>,
<b-cousson@...com>, <linux@....linux.org.uk>,
<eballetbo@...il.com>, <javier@...hile0.org>, <kishon@...com>,
<mchehab@...hat.com>, <santosh.shilimkar@...com>,
<broonie@...nsource.wolfsonmicro.com>, <swarren@...dia.com>,
<linux-doc@...r.kernel.org>, <devicetree-discuss@...ts.ozlabs.org>,
<linux-arm-kernel@...ts.infradead.org>
Subject: [PATCH v3 5/6] ARM: dts: omap: update usb_otg_hs data
Updated the usb_otg_hs dt data to include the *phy* and *phy-names*
binding in order for the driver to use the new generic PHY framework.
Also updated the Documentation to include the binding information.
Signed-off-by: Kishon Vijay Abraham I <kishon@...com>
---
Documentation/devicetree/bindings/usb/omap-usb.txt | 5 +++++
arch/arm/boot/dts/omap3.dtsi | 2 ++
arch/arm/boot/dts/omap4.dtsi | 2 ++
3 files changed, 9 insertions(+)
diff --git a/Documentation/devicetree/bindings/usb/omap-usb.txt b/Documentation/devicetree/bindings/usb/omap-usb.txt
index abce256..3d6f9f6 100644
--- a/Documentation/devicetree/bindings/usb/omap-usb.txt
+++ b/Documentation/devicetree/bindings/usb/omap-usb.txt
@@ -19,6 +19,9 @@ OMAP MUSB GLUE
- power : Should be "50". This signifies the controller can supply upto
100mA when operating in host mode.
- usb-phy : the phandle for the PHY device
+ - phy : the phandle for the PHY device (used by generic PHY framework)
+ - phy-names : the names of the PHY corresponding to the PHYs present in the
+ *phy* phandle.
Optional properties:
- ctrl-module : phandle of the control module this glue uses to write to
@@ -33,6 +36,8 @@ usb_otg_hs: usb_otg_hs@...ab000 {
num_eps = <16>;
ram_bits = <12>;
ctrl-module = <&omap_control_usb>;
+ phy = <&usb2_phy>;
+ phy-names = "usb2-phy";
};
Board specific device node entry
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index 1e21565..cf50c18 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -405,6 +405,8 @@
interrupt-names = "mc", "dma";
ti,hwmods = "usb_otg_hs";
usb-phy = <&usb2_phy>;
+ phy = <&usb2_phy>;
+ phy-names = "usb2-phy";
multipoint = <1>;
num-eps = <16>;
ram-bits = <12>;
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index 06d044e..188d5b8 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -550,6 +550,8 @@
interrupt-names = "mc", "dma";
ti,hwmods = "usb_otg_hs";
usb-phy = <&usb2_phy>;
+ phy = <&usb2_phy>;
+ phy-names = "usb2-phy";
multipoint = <1>;
num-eps = <16>;
ram-bits = <12>;
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists