| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <A874F61F95741C4A9BA573A70FE3998F82E48E3F@DQHE02.ent.ti.com>
Date: Thu, 21 Mar 2013 00:37:14 +0000
From: "Kim, Milo" <Milo.Kim@...com>
To: "Mike Turquette (mturquette@...aro.org)" <mturquette@...aro.org>
CC: "Samuel Ortiz (sameo@...ux.intel.com)" <sameo@...ux.intel.com>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: [PATCH] clk: add LP8788 clock driver
LP8788 PMU consists of regulator, battery charger, RTC, ADC, backlight driver
and current sinks.
Here is additional driver, clock.
* Clock source
LP8788 clock is generated by two clock source.
One is internal oscillator. The other is attached external crystal oscillator.
LP8788 provides automatic clock source selection through the I2C register.
This operation is executed in 'prepare' of common clock driver architecture.
* Clock rate
LP8788 generates a fixed 32768Hz clock which is used for the system.
* Supported operation
.prepare: Before the clock is enabled, automatic clock source selection is done
by register access.
.unprepare: No register for disable or remove the clock source, so do nothing.
.is_enabled
.recalc_rate: Fixed clock rate, 32.768KHz.
* clk_register_fixed_rate() vs devm_clk_register() and clkdev_add()
Fixed clock driver can be created by common clock helper function but
but LP8788 should be built as a module.
Using devm_clk_register() and clkdev_add() is more appropriate method to
implement LP8788 clock driver.
Signed-off-by: Milo(Woogyom) Kim <milo.kim@...com>
---
drivers/clk/Kconfig | 7 ++
drivers/clk/Makefile | 1 +
drivers/clk/clk-lp8788.c | 186 ++++++++++++++++++++++++++++++++++++++++++++
drivers/mfd/lp8788.c | 2 +
include/linux/mfd/lp8788.h | 1 +
5 files changed, 197 insertions(+)
create mode 100644 drivers/clk/clk-lp8788.c
diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index a64caef..4b5109c 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -71,6 +71,13 @@ config COMMON_CLK_AXI_CLKGEN
Support for the Analog Devices axi-clkgen pcore clock generator for Xilinx
FPGAs. It is commonly used in Analog Devices' reference designs.
+config CLK_LP8788
+ tristate "Clock driver for TI LP8788 PMU"
+ depends on MFD_LP8788
+ ---help---
+ Supports the clock subsystem of TI LP8788. It generates the 32KHz
+ clock output.
+
endmenu
source "drivers/clk/mvebu/Kconfig"
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index 1c22f9d..06d0763 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -35,3 +35,4 @@ obj-$(CONFIG_COMMON_CLK_AXI_CLKGEN) += clk-axi-clkgen.o
obj-$(CONFIG_COMMON_CLK_WM831X) += clk-wm831x.o
obj-$(CONFIG_COMMON_CLK_MAX77686) += clk-max77686.o
obj-$(CONFIG_CLK_TWL6040) += clk-twl6040.o
+obj-$(CONFIG_CLK_LP8788) += clk-lp8788.o
diff --git a/drivers/clk/clk-lp8788.c b/drivers/clk/clk-lp8788.c
new file mode 100644
index 0000000..de56887
--- /dev/null
+++ b/drivers/clk/clk-lp8788.c
@@ -0,0 +1,186 @@
+/*
+ * TI LP8788 Clock Driver
+ *
+ * Copyright 2013 Texas Instruments
+ *
+ * Author: Milo(Woogyom) Kim <milo.kim@...com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/mfd/lp8788.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+
+/* Registers */
+#define LP8788_REG_STATUS 0x06
+#define LP8788_OSC_WORKING 0x10
+
+#define LP8788_REG_CLKCTRL 0xA2
+#define LP8788_CLKMODE_MASK 0x02
+#define LP8788_CLKMODE_AUTO 0X02
+
+#define CLKOUT_32KHZ 32768
+
+struct lp8788_clk {
+ struct lp8788 *lp;
+ struct clk *clk;
+ struct clk_hw hw;
+ struct clk_lookup *lookup;
+ bool enabled;
+};
+
+static struct lp8788_clk *to_lp8788_clk(struct clk_hw *hw)
+{
+ return container_of(hw, struct lp8788_clk, hw);
+}
+
+static int lp8788_clk_prepare(struct clk_hw *hw)
+{
+ struct lp8788_clk *pclk = to_lp8788_clk(hw);
+
+ /* Automatic oscillator source selection */
+ return lp8788_update_bits(pclk->lp, LP8788_REG_CLKCTRL,
+ LP8788_CLKMODE_MASK, LP8788_CLKMODE_AUTO);
+}
+
+static void lp8788_clk_unprepare(struct clk_hw *hw)
+{
+ /* Do nothing */
+ return;
+}
+
+static int lp8788_clk_is_enabled(struct clk_hw *hw)
+{
+ struct lp8788_clk *pclk = to_lp8788_clk(hw);
+
+ /*
+ * Do not use the LP8788 register access here, unsafe locking problem
+ * may occur during loading the driver. So stored varible is prefered.
+ */
+
+ return pclk->enabled;
+}
+
+static unsigned long lp8788_clk_recalc_rate(struct clk_hw *hw,
+ unsigned long unused)
+{
+ return CLKOUT_32KHZ;
+}
+
+static const struct clk_ops lp8788_clk_ops = {
+ .prepare = lp8788_clk_prepare,
+ .unprepare = lp8788_clk_unprepare,
+ .is_enabled = lp8788_clk_is_enabled,
+ .recalc_rate = lp8788_clk_recalc_rate,
+};
+
+static struct clk_init_data lp8788_clk_cfg = {
+ .name = "32k_clk",
+ .ops = &lp8788_clk_ops,
+ .flags = CLK_IS_ROOT,
+};
+
+static int lp8788_clk_register(struct device *dev, struct lp8788_clk *pclk)
+{
+ struct clk_lookup *lookup;
+
+ pclk->hw.init = &lp8788_clk_cfg;
+ pclk->clk = devm_clk_register(dev, &pclk->hw);
+ if (IS_ERR(pclk->clk)) {
+ dev_err(dev, "clk register err\n");
+ return PTR_ERR(pclk->clk);
+ }
+
+ lookup = clkdev_alloc(pclk->clk, lp8788_clk_cfg.name, NULL);
+ if (!lookup) {
+ dev_err(dev, "clkdev_alloc err\n");
+ return -ENOMEM;
+ }
+ pclk->lookup = lookup;
+
+ clkdev_add(lookup);
+
+ return 0;
+}
+
+static void lp8788_clk_unregister(struct lp8788_clk *pclk)
+{
+ if (pclk->lookup)
+ clkdev_drop(pclk->lookup);
+}
+
+static int lp8788_get_clk_status(struct lp8788_clk *pclk)
+{
+ int ret;
+ u8 val;
+
+ ret = lp8788_read_byte(pclk->lp, LP8788_REG_STATUS, &val);
+ if (ret)
+ return ret;
+
+ pclk->enabled = val & LP8788_OSC_WORKING;
+
+ return 0;
+}
+
+static int lp8788_clk_probe(struct platform_device *pdev)
+{
+ struct lp8788 *lp = dev_get_drvdata(pdev->dev.parent);
+ struct lp8788_clk *pclk;
+ int ret;
+
+ pclk = devm_kzalloc(&pdev->dev, sizeof(struct lp8788_clk), GFP_KERNEL);
+ if (!pclk)
+ return -ENOMEM;
+
+ pclk->lp = lp;
+ platform_set_drvdata(pdev, pclk);
+
+ ret = lp8788_get_clk_status(pclk);
+ if (ret)
+ return ret;
+
+ return lp8788_clk_register(&pdev->dev, pclk);
+}
+
+static int lp8788_clk_remove(struct platform_device *pdev)
+{
+ struct lp8788_clk *pclk = platform_get_drvdata(pdev);
+
+ lp8788_clk_unregister(pclk);
+ return 0;
+}
+
+static struct platform_driver lp8788_clk_driver = {
+ .probe = lp8788_clk_probe,
+ .remove = lp8788_clk_remove,
+ .driver = {
+ .name = LP8788_DEV_CLK,
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init lp8788_clk_init(void)
+{
+ return platform_driver_register(&lp8788_clk_driver);
+}
+subsys_initcall(lp8788_clk_init);
+
+static void __exit lp8788_clk_exit(void)
+{
+ platform_driver_unregister(&lp8788_clk_driver);
+}
+module_exit(lp8788_clk_exit);
+
+MODULE_DESCRIPTION("TI LP8788 Clock Driver");
+MODULE_AUTHOR("Milo Kim");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:lp8788-clk");
diff --git a/drivers/mfd/lp8788.c b/drivers/mfd/lp8788.c
index c3d3c9b..9f5596e 100644
--- a/drivers/mfd/lp8788.c
+++ b/drivers/mfd/lp8788.c
@@ -72,6 +72,8 @@ static struct resource rtc_irqs[] = {
};
static struct mfd_cell lp8788_devs[] = {
+ MFD_DEV_SIMPLE(CLK),
+
/* 4 bucks */
MFD_DEV_WITH_ID(BUCK, 1),
MFD_DEV_WITH_ID(BUCK, 2),
diff --git a/include/linux/mfd/lp8788.h b/include/linux/mfd/lp8788.h
index 786bf66..5f33be8 100644
--- a/include/linux/mfd/lp8788.h
+++ b/include/linux/mfd/lp8788.h
@@ -28,6 +28,7 @@
#define LP8788_DEV_VIBRATOR "lp8788-vibrator"
#define LP8788_DEV_KEYLED "lp8788-keyled"
#define LP8788_DEV_ADC "lp8788-adc"
+#define LP8788_DEV_CLK "lp8788-clk"
#define LP8788_NUM_BUCKS 4
#define LP8788_NUM_DLDOS 12
--
1.7.9.5
Best Regards,
Milo
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists