lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1363866099.2289.8.camel@leyfoon-vm>
Date:	Thu, 21 Mar 2013 19:41:39 +0800
From:	Ley Foon Tan <lftan@...era.com>
To:	Heikki Krogerus <heikki.krogerus@...ux.intel.com>
CC:	Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
	Jiri Slaby <jslaby@...e.cz>, Rob Landley <rob@...dley.net>,
	<linux-kernel@...r.kernel.org>, <linux-serial@...r.kernel.org>
Subject: Re: [PATCH 2/2] serial: of_serial: Handle fifosize property

On Thu, 2013-03-21 at 12:48 +0200, Heikki Krogerus wrote:
> fifosize property is already used with a number of serial
> devices. This should reduce the need for extra types in
> 8250.c just in case the fifosize differs from the standard.
> 
> Signed-off-by: Heikki Krogerus <heikki.krogerus@...ux.intel.com>
> ---
>  Documentation/devicetree/bindings/tty/serial/of-serial.txt |    1 +
>  drivers/tty/serial/of_serial.c                             |    4 ++++
>  2 files changed, 5 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/tty/serial/of-serial.txt b/Documentation/devicetree/bindings/tty/serial/of-serial.txt
> index 8f01cb1..55fe4e7 100644
> --- a/Documentation/devicetree/bindings/tty/serial/of-serial.txt
> +++ b/Documentation/devicetree/bindings/tty/serial/of-serial.txt
> @@ -33,6 +33,7 @@ Optional properties:
>    RTAS and should not be registered.
>  - no-loopback-test: set to indicate that the port does not implements loopback
>    test mode
> +- fifosize: the fifo size of the UART.
>  
>  Example:
>  
> diff --git a/drivers/tty/serial/of_serial.c b/drivers/tty/serial/of_serial.c
> index b025d54..4f89761 100644
> --- a/drivers/tty/serial/of_serial.c
> +++ b/drivers/tty/serial/of_serial.c
> @@ -97,6 +97,10 @@ static int of_platform_serial_setup(struct platform_device *ofdev,
>  	if (of_property_read_u32(np, "reg-shift", &prop) == 0)
>  		port->regshift = prop;
>  
> +	/* Check for fifo size */
> +	if (of_property_read_u32(np, "fifosize", &prop) == 0)
> +		port->fifosize = prop;
> +
Suggest to use "fifo-size" for the device tree property, to align with
other DT properties.

>  	port->irq = irq_of_parse_and_map(np, 0);
>  	port->iotype = UPIO_MEM;
>  	if (of_property_read_u32(np, "reg-io-width", &prop) == 0) {

I think you need to remove the UPF_FIXED_TYPE from port-flags as well to
use the fifo size from device tree. Otherwise, it will get from the
static array in 8250.c.

LFTan


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ