| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1363956907-5644-1-git-send-email-lkundrak@v3.sk>
Date: Fri, 22 Mar 2013 13:55:07 +0100
From: Lubomir Rintel <lkundrak@...sk>
To: linux-kernel@...r.kernel.org
Cc: Lubomir Rintel <lkundrak@...sk>,
Stephen Warren <swarren@...dotorg.org>,
Wim Van Sebroeck <wim@...ana.be>,
linux-rpi-kernel@...ts.infradead.org,
linux-watchdog@...r.kernel.org
Subject: [PATCH] watchdog: Add Broadcom BCM2708 watchdog timer driver
Signed-off-by: Lubomir Rintel <lkundrak@...sk>
Cc: Stephen Warren <swarren@...dotorg.org>
Cc: Wim Van Sebroeck <wim@...ana.be>
Cc: linux-rpi-kernel@...ts.infradead.org
Cc: linux-watchdog@...r.kernel.org
---
arch/arm/configs/bcm2835_defconfig | 4 +
drivers/watchdog/Kconfig | 11 +++
drivers/watchdog/Makefile | 1 +
drivers/watchdog/bcm2835_wdt.c | 158 ++++++++++++++++++++++++++++++++++++
4 files changed, 174 insertions(+), 0 deletions(-)
create mode 100644 drivers/watchdog/bcm2835_wdt.c
diff --git a/arch/arm/configs/bcm2835_defconfig b/arch/arm/configs/bcm2835_defconfig
index 611bda2..8f1547a 100644
--- a/arch/arm/configs/bcm2835_defconfig
+++ b/arch/arm/configs/bcm2835_defconfig
@@ -67,6 +67,10 @@ CONFIG_I2C_BCM2835=y
CONFIG_GPIO_SYSFS=y
# CONFIG_HWMON is not set
# CONFIG_USB_SUPPORT is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_CORE=y
+CONFIG_BCM2835_WDT=y
+
CONFIG_MMC=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PLTFM=y
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 9fcc70c..f4e4a8e 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -1098,6 +1098,17 @@ config BCM63XX_WDT
To compile this driver as a loadable module, choose M here.
The module will be called bcm63xx_wdt.
+config BCM2835_WDT
+ tristate "Broadcom BCM2835 hardware watchdog"
+ depends on ARCH_BCM2835
+ select WATCHDOG_CORE
+ help
+ Watchdog driver for the built in watchdog hardware in Broadcom
+ BCM2835 SoC.
+
+ To compile this driver as a loadable module, choose M here.
+ The module will be called bcm2835_wdt.
+
config LANTIQ_WDT
tristate "Lantiq SoC watchdog"
depends on LANTIQ
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index a300b94..1bf5675 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -54,6 +54,7 @@ obj-$(CONFIG_TS72XX_WATCHDOG) += ts72xx_wdt.o
obj-$(CONFIG_IMX2_WDT) += imx2_wdt.o
obj-$(CONFIG_UX500_WATCHDOG) += ux500_wdt.o
obj-$(CONFIG_RETU_WATCHDOG) += retu_wdt.o
+obj-$(CONFIG_BCM2835_WDT) += bcm2835_wdt.o
# AVR32 Architecture
obj-$(CONFIG_AT32AP700X_WDT) += at32ap700x_wdt.o
diff --git a/drivers/watchdog/bcm2835_wdt.c b/drivers/watchdog/bcm2835_wdt.c
new file mode 100644
index 0000000..834f201
--- /dev/null
+++ b/drivers/watchdog/bcm2835_wdt.c
@@ -0,0 +1,158 @@
+/*
+ * Watchdog driver for Broadcom BCM2835
+ *
+ * Copyright (C) 2013 Lubomir Rintel <lkundrak@...sk>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/watchdog.h>
+#include <linux/platform_device.h>
+#include <linux/of_address.h>
+#include <linux/miscdevice.h>
+
+#define PM_RSTC 0x1c
+#define PM_RSTS 0x20
+#define PM_WDOG 0x24
+
+#define PM_PASSWORD 0x5a000000
+#define PM_RSTC_WRCFG_MASK 0x00000030
+#define PM_RSTC_WRCFG_FULL_RESET 0x00000020
+#define PM_RSTS_HADWRH_SET 0x00000040
+
+#define PM_WDOG_TIME_SET 0x000fffff
+#define PM_RSTC_WRCFG_CLR 0xffffffcf
+#define PM_RSTC_WRCFG_SET 0x00000030
+#define PM_RSTC_WRCFG_FULL_RESET 0x00000020
+#define PM_RSTC_RESET 0x00000102
+
+#define SECS_TO_WDOG_TICKS(x) ((x) << 16)
+#define WDOG_TICKS_TO_SECS(x) ((x) >> 16)
+
+static int heartbeat = -1;
+static bool nowayout = WATCHDOG_NOWAYOUT;
+static void __iomem *wdt_regs;
+static DEFINE_SPINLOCK(wdog_lock);
+
+static int bcm2835_wdt_start(struct watchdog_device *wdog)
+{
+ uint32_t cur;
+ unsigned long flags;
+
+ spin_lock_irqsave(&wdog_lock, flags);
+
+ writel_relaxed(PM_PASSWORD | (SECS_TO_WDOG_TICKS(wdog->timeout) &
+ PM_WDOG_TIME_SET), wdt_regs + PM_WDOG);
+ cur = readl_relaxed(wdt_regs + PM_RSTC);
+ writel_relaxed(PM_PASSWORD | (cur & PM_RSTC_WRCFG_CLR) |
+ PM_RSTC_WRCFG_FULL_RESET, wdt_regs + PM_RSTC);
+
+ spin_unlock_irqrestore(&wdog_lock, flags);
+
+ return 0;
+}
+
+static int bcm2835_wdt_stop(struct watchdog_device *wdog)
+{
+ writel_relaxed(PM_PASSWORD | PM_RSTC_RESET, wdt_regs + PM_RSTC);
+ dev_info(wdog->dev, "Watchdog timer stopped");
+ return 0;
+}
+
+static int bcm2835_wdt_set_timeout(struct watchdog_device *wdog, unsigned int t)
+{
+ wdog->timeout = t;
+ return 0;
+}
+
+static unsigned int bcm2835_wdt_get_timeleft(struct watchdog_device *wdog)
+{
+ uint32_t ret = readl_relaxed(wdt_regs + PM_WDOG);
+ return WDOG_TICKS_TO_SECS(ret & PM_WDOG_TIME_SET);
+}
+
+static struct watchdog_ops bcm2835_wdt_ops = {
+ .owner = THIS_MODULE,
+ .start = bcm2835_wdt_start,
+ .stop = bcm2835_wdt_stop,
+ .set_timeout = bcm2835_wdt_set_timeout,
+ .get_timeleft = bcm2835_wdt_get_timeleft,
+};
+
+static struct watchdog_info bcm2835_wdt_info = {
+ .options = WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE |
+ WDIOF_KEEPALIVEPING,
+ .identity = "Broacom BCM2835 Watchdog timer",
+};
+
+static struct watchdog_device bcm2835_wdt_wdd = {
+ .info = &bcm2835_wdt_info,
+ .ops = &bcm2835_wdt_ops,
+ .min_timeout = 1,
+ .max_timeout = WDOG_TICKS_TO_SECS(PM_WDOG_TIME_SET),
+};
+
+static int bcm2835_wdt_probe(struct platform_device *op)
+{
+ struct device *dev = &op->dev;
+ struct device_node *np = dev->of_node;
+
+ wdt_regs = of_iomap(np, 0);
+ if (WARN(!wdt_regs, "failed to remap watchdog regs"))
+ return -ENODEV;
+ dev_info(dev, "Broadcom BCM2835 watchdog timer");
+
+ watchdog_init_timeout(&bcm2835_wdt_wdd, heartbeat, dev);
+ watchdog_set_nowayout(&bcm2835_wdt_wdd, nowayout);
+ return watchdog_register_device(&bcm2835_wdt_wdd);
+}
+
+static int bcm2835_wdt_remove(struct platform_device *op)
+{
+ watchdog_unregister_device(&bcm2835_wdt_wdd);
+ iounmap(wdt_regs);
+
+ return 0;
+}
+
+static void bcm2835_wdt_shutdown(struct platform_device *op)
+{
+ bcm2835_wdt_stop(&bcm2835_wdt_wdd);
+}
+
+static const struct of_device_id bcm2835_wdt_of_match[] = {
+ { .compatible = "brcm,bcm2835-pm-wdt", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, bcm2835_wdt_of_match);
+
+static struct platform_driver bcm2835_wdt_driver = {
+ .probe = bcm2835_wdt_probe,
+ .remove = bcm2835_wdt_remove,
+ .shutdown = bcm2835_wdt_shutdown,
+ .driver = {
+ .name = "bcm2835-wdt",
+ .owner = THIS_MODULE,
+ .of_match_table = bcm2835_wdt_of_match,
+ },
+};
+
+module_platform_driver(bcm2835_wdt_driver);
+
+module_param(heartbeat, int, 0);
+MODULE_PARM_DESC(heartbeat, "Initial watchdog heartbeat in seconds");
+
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
+ __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+MODULE_AUTHOR("Lubomir Rintel <lkundrak@...sk>");
+MODULE_DESCRIPTION("Driver for Broadcom BCM2835 watchdog timer");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists