linux-kernel - Re: [Lxc-users] Containers slow to start after 1600

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <CD724CB7.72DE%blourdel@juniper.net>
Date:	Fri, 22 Mar 2013 17:05:44 +0000
From:	Benoit Lourdelet <blourdel@...iper.net>
To:	"Eric W. Biederman" <ebiederm@...ssion.com>
CC:	Serge Hallyn <serge.hallyn@...ntu.com>,
	"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
	lxc-users <lxc-users@...ts.sourceforge.net>
Subject: Re: [Lxc-users] Containers slow to start after 1600

Hello,

I tried multiple kernels with similar results.

I ran the following on 3.8.2

$ cat > test-script.sh << 'EOF'
#!/bin/bash
for i in $(seq 1 2000) ; do
	ip link add a$i type veth peer name b$i
done
EOF

$ perf record -a test-script.sh
$ perf report


# event : name = cycles, type = 0, config = 0x0, config1 = 0x0, config2 =
0x0, excl_usr = 0, excl_kern = 0, excl_host = 0, excl_guest = 1,
precise_ip = 0, id = { 33
# HEADER_NUMA_TOPOLOGY info available, use -I to display
# pmu mappings: cpu = 4, software = 1, uncore_pcu = 15, tracepoint = 2,
uncore_imc_0 = 17, uncore_imc_1 = 18, uncore_imc_2 = 19, uncore_imc_3 =
20, uncore_qpi_0 = 2
# ========
#
# Samples: 2M of event 'cycles'
# Event count (approx.): 638240250735
#
# Overhead Command Shared Object Symbol
# ........ ............... .............................
.......................................ŠŠ.
#
    11.13% ip [kernel.kallsyms] [k] snmp_fold_field
   
     4.24% ip [kernel.kallsyms] [k] find_next_bit
   
     2.51% swapper [kernel.kallsyms] [k] intel_idle
        
     1.71% init libnih.so.1.0.0 [.] nih_list_add_after
   
     1.35% ip [kernel.kallsyms] [k] memcpy
   
     1.28% ip [xt_conntrack] [k] 0x0000000000005296
     1.26% ip [kernel.kallsyms] [k] rtnl_fill_ifinfo
   
     1.25% sed ld-2.15.so [.] 0x0000000000015972
     1.13% ifquery ld-2.15.so [.] 0x0000000000008bdb
 
     1.10% init [kernel.kallsyms] [k] page_fault
     
     1.00% ifquery [kernel.kallsyms] [k] page_fault
        
     0.97% init libc-2.15.so [.] 0x0000000000131e42
     0.94% sed [kernel.kallsyms] [k] page_fault
    
     0.75% ip [kernel.kallsyms] [k] inet6_fill_ifla6_attrs
   
     0.67% ip [kernel.kallsyms] [k] memset
   
     0.66% init [kernel.kallsyms] [k] copy_pte_range
     
     0.64% init init [.] 0x0000000000012433
     0.58% sed libc-2.15.so [.] 0x000000000008149a
     0.48% init libnih.so.1.0.0 [.] nih_tree_next_post_full




If I increase the number of links created , time spent for SNMP can even
increase :

12.04% ip [kernel.kallsyms] [k] snmp_fold_field
    
    12.03% sudo [kernel.kallsyms] [k] snmp_fold_field
          
     8.56% sudo libc-2.15.so [.] 0x000000000009198b
     
     4.39% sudo [kernel.kallsyms] [k] find_next_bit
          
     4.36% ip [kernel.kallsyms] [k] find_next_bit
        
     3.17% irqbalance libc-2.15.so [.] 0x000000000003d298
           
     2.01% init libnih.so.1.0.0 [.] nih_list_add_after
        
     1.63% ip [kernel.kallsyms] [k] rtnl_fill_ifinfo


Regards

Benoit


On 20/03/2013 21:38, "Eric W. Biederman" <ebiederm@...ssion.com> wrote:

>Benoit Lourdelet <blourdel@...iper.net> writes:
>
>> Hello,
>>
>> The measurement has been done with kernel 3.8.2.
>>
>> Linux ieng-serv06 3.7.9 #3 SMP Wed Feb 27 02:38:58 PST 2013 x86_64
>>x86_64
>> x86_64 GNU/Linux
>
>Two different kernel versions?
>
>> What information would you like to see on the kernel ?
>
>The question is where is the kernel spending it's time.  So profiling
>information should help us see that.  Something like.
>
>$ cat > test-script.sh << 'EOF'
>#!/bin/bash
>for i in $(seq 1 2000) ; do
>	ip link add a$i type veth peer name b$i
>done
>EOF
>
>$ perf record -a -g test-script.sh
>$ perf report 
>
>I don't do anywhere enough work with perf to remember what good options
>are.
>
>You definititely don't want to time anything you are doing something
>silly like asking ip link add to generate device names which is O(N^2)
>when you create one device at a time.
>
>And of course there is the interesting discrepency.  Why can I add 5000
>veth pairs in 120 seconds and it takes you 1123 seconds.  Do you have a
>very
>slow cpu in your test environment?  Or was your test asking the kernel
>to generate names.
>
>Once we know where the kernel is spending it's time we can look to see
>if there is anything that is easy to fix, and where to point you.
>
>Both my timing and yours indicates that there is something taking O(N^2)
>time in there.  So it would at least be interesting to see what that
>something is.
>
>Eric
>


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/