| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <51519FD3.5000402@gmail.com>
Date: Tue, 26 Mar 2013 08:17:07 -0500
From: Rob Herring <robherring2@...il.com>
To: Viresh Kumar <viresh.kumar@...aro.org>
CC: "Rafael J. Wysocki" <rjw@...k.pl>, nicolas.pitre@...aro.org,
robin.randhawa@....com, linux@....linux.org.uk,
mark.hambleton@...adcom.com, linux-pm@...r.kernel.org,
Sudeep KarkadaNagesha <sudeep.karkadanagesha@....com>,
devicetree-discuss@...ts.ozlabs.org, Liviu.Dudau@....com,
linux-kernel@...r.kernel.org, cpufreq@...r.kernel.org,
linaro-kernel@...ts.linaro.org, Steve.Bannister@....com,
arvind.chauhan@....com, linux-arm-kernel@...ts.infradead.org,
charles.garcia-tobin@....com,
Mark Langsdorf <mark.langsdorf@...xeda.com>,
Shawn Guo <shawn.guo@...aro.org>
Subject: Re: [PATCH V2] cpufreq: ARM big LITTLE: Add generic cpufreq driver
and its DT glue
On 03/26/2013 04:51 AM, Viresh Kumar wrote:
> big LITTLE is ARM's new Architecture focussing power/performance needs of modern
> world. More information about big LITTLE can be found here:
>
> http://www.arm.com/products/processors/technologies/biglittleprocessing.php
> http://lwn.net/Articles/481055/
>
> In order to keep cpufreq support for all big LITTLE platforms simple/generic,
> this patch tries to add a generic cpufreq driver layer for all big LITTLE
> platforms.
>
> The driver is divided into two parts:
> - Core driver: Generic and shared across all big LITTLE SoC's
> - Glue drivers: Per platform drivers providing ops to the core driver
>
> This patch adds in a generic glue driver which would extract information from
> Device Tree.
>
> Future SoC's can either reuse the DT glue or write their own depending on the
> need.
>
> Signed-off-by: Sudeep KarkadaNagesha <sudeep.karkadanagesha@....com>
> Signed-off-by: Viresh Kumar <viresh.kumar@...aro.org>
> ---
> V1->V2:
> - It was reviewed here earlier: https://lkml.org/lkml/2013/3/4/614
> - It supports OPP library now and doesn't create a new binding for cpufreq table
> - It doesn't add any dependency on cluster node in DT, rather we work with
> existing cpu nodes, Documentation updated.
> - cpu_dev used because of OPP library and hence dev_err/dbg/info used at
> multiple places.
> - Interface with glue driver updated a bit
> - IS_ERR_OR_NULL replaced with IS_ERR for clk_get
> - clk_get_sys used instead of clk_get and name of clk is also updated
> - Few more minor cleanups done.
>
> It is pushed here:
>
> http://git.linaro.org/gitweb?p=people/vireshk/linux.git;a=shortlog;h=refs/heads/cpufreq-biglittle
>
> .../bindings/cpufreq/arm_big_little_dt.txt | 65 +++++
> MAINTAINERS | 11 +
> drivers/cpufreq/Kconfig.arm | 12 +
> drivers/cpufreq/Makefile | 4 +
> drivers/cpufreq/arm_big_little.c | 282 +++++++++++++++++++++
> drivers/cpufreq/arm_big_little.h | 40 +++
> drivers/cpufreq/arm_big_little_dt.c | 92 +++++++
> 7 files changed, 506 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/cpufreq/arm_big_little_dt.txt
> create mode 100644 drivers/cpufreq/arm_big_little.c
> create mode 100644 drivers/cpufreq/arm_big_little.h
> create mode 100644 drivers/cpufreq/arm_big_little_dt.c
>
> diff --git a/Documentation/devicetree/bindings/cpufreq/arm_big_little_dt.txt b/Documentation/devicetree/bindings/cpufreq/arm_big_little_dt.txt
> new file mode 100644
> index 0000000..34a460d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/cpufreq/arm_big_little_dt.txt
> @@ -0,0 +1,65 @@
> +Generic ARM big LITTLE cpufreq driver's DT glue
> +-----------------------------------------------
> +
> +This is DT specific glue layer for generic cpufreq driver for big LITTLE
> +systems.
I fail to see anything bL specific here. This is just multi-cluster, but
even for that I don't see anything new other than simply allowing per
cpu or per cluster opp's. The fact that we have one opp for a cluster is
simply an implementation decision in CortexA cores.
> +
> +Both required and optional properties listed below must be defined
> +under node /cpus/cpu@x. Where x is the first cpu inside a cluster.
> +
> +NOTE: Cpus should boot in the order specified in DT and all cpus for a cluster
> +must be present contiguously. Generic DT driver will check only node 'x' for
> +cpu:x.
The OS cannot necessarily control the order. The OS should be able to
boot on which ever core comes up first.
> +
> +Required properties:
> +- operating-points: Refer to Documentation/devicetree/bindings/power/opp.txt
> + for details
> +
> +Optional properties:
> +- clock-latency: Specify the possible maximum transition latency for clock,
> + in unit of nanoseconds.
Don't we already have "transition-latency" defined? Don't create
something new. Ideally, this should have had "-ns" appended, but the
binding is already defined.
> +
> +Examples:
> +
> +cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + cpu@0 {
> + compatible = "arm,cortex-a15";
> + reg = <0>;
> + next-level-cache = <&L2>;
> + operating-points = <
> + /* kHz uV */
> + 792000 1100000
> + 396000 950000
> + 198000 850000
> + >;
> + clock-latency = <61036>; /* two CLK32 periods */
> + };
> +
> + cpu@1 {
> + compatible = "arm,cortex-a15";
> + reg = <1>;
> + next-level-cache = <&L2>;
> + };
> +
> + cpu@100 {
> + compatible = "arm,cortex-a7";
> + reg = <100>;
> + next-level-cache = <&L2>;
> + operating-points = <
> + /* kHz uV */
> + 792000 950000
> + 396000 750000
> + 198000 450000
> + >;
> + clock-latency = <61036>; /* two CLK32 periods */
> + };
> +
> + cpu@101 {
> + compatible = "arm,cortex-a7";
> + reg = <101>;
> + next-level-cache = <&L2>;
> + };
> +};
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 4cf5fd3..4071b71 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -2206,6 +2206,17 @@ S: Maintained
> F: drivers/cpufreq/
> F: include/linux/cpufreq.h
>
> +CPU FREQUENCY DRIVERS - ARM BIG LITTLE
> +M: Viresh Kumar <viresh.kumar@...aro.org>
> +M: Sudeep KarkadaNagesha <sudeep.karkadanagesha@....com>
> +L: cpufreq@...r.kernel.org
> +L: linux-pm@...r.kernel.org
> +W: http://www.arm.com/products/processors/technologies/biglittleprocessing.php
> +S: Maintained
> +F: drivers/cpufreq/arm_big_little.h
> +F: drivers/cpufreq/arm_big_little.c
> +F: drivers/cpufreq/arm_big_little_dt.c
> +
> CPUID/MSR DRIVER
> M: "H. Peter Anvin" <hpa@...or.com>
> S: Maintained
> diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
> index 030ddf6..87b7e48 100644
> --- a/drivers/cpufreq/Kconfig.arm
> +++ b/drivers/cpufreq/Kconfig.arm
> @@ -2,6 +2,18 @@
> # ARM CPU Frequency scaling drivers
> #
>
> +config ARM_BIG_LITTLE_CPUFREQ
> + tristate
> + depends on ARM_CPU_TOPOLOGY
> +
> +config ARM_DT_BL_CPUFREQ
> + tristate "Generic ARM big LITTLE CPUfreq driver probed via DT"
> + select ARM_BIG_LITTLE_CPUFREQ
> + depends on OF && HAVE_CLK
> + help
> + This enables the Generic CPUfreq driver for ARM big.LITTLE platform.
> + This gets frequency tables from DT.
> +
> config ARM_OMAP2PLUS_CPUFREQ
> bool "TI OMAP2+"
> depends on ARCH_OMAP2PLUS
> diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
> index 863fd18..d1b0832 100644
> --- a/drivers/cpufreq/Makefile
> +++ b/drivers/cpufreq/Makefile
> @@ -44,6 +44,10 @@ obj-$(CONFIG_X86_INTEL_PSTATE) += intel_pstate.o
>
> ##################################################################################
> # ARM SoC drivers
> +obj-$(CONFIG_ARM_BIG_LITTLE_CPUFREQ) += arm_big_little.o
> +# big LITTLE per platform glues. Keep DT_BL_CPUFREQ as the last entry in all big
> +# LITTLE drivers, so that it is probed last.
> +obj-$(CONFIG_ARM_DT_BL_CPUFREQ) += arm_big_little_dt.o
> obj-$(CONFIG_UX500_SOC_DB8500) += dbx500-cpufreq.o
> obj-$(CONFIG_ARM_S3C2416_CPUFREQ) += s3c2416-cpufreq.o
> obj-$(CONFIG_ARM_S3C64XX_CPUFREQ) += s3c64xx-cpufreq.o
> diff --git a/drivers/cpufreq/arm_big_little.c b/drivers/cpufreq/arm_big_little.c
> new file mode 100644
> index 0000000..1d29d1a
> --- /dev/null
> +++ b/drivers/cpufreq/arm_big_little.c
> @@ -0,0 +1,282 @@
> +/*
> + * ARM big.LITTLE Platforms CPUFreq support
What is specific to bL? This looks like just a multi-cluster cpufreq
driver and should be generalized to that. Also, why can't the existing
cpufreq-cpu0 driver be extended to support this?
> + * Copyright (C) 2013 ARM Ltd.
> + * Sudeep KarkadaNagesha <sudeep.karkadanagesha@....com>
> + *
> + * Copyright (C) 2013 Linaro.
> + * Viresh Kumar <viresh.kumar@...aro.org>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed "as is" WITHOUT ANY WARRANTY of any
> + * kind, whether express or implied; without even the implied warranty
> + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
> +
> +#include <linux/clk.h>
> +#include <linux/cpu.h>
> +#include <linux/cpufreq.h>
> +#include <linux/cpumask.h>
> +#include <linux/export.h>
> +#include <linux/of_platform.h>
> +#include <linux/opp.h>
> +#include <linux/slab.h>
> +#include <linux/topology.h>
> +#include <linux/types.h>
> +
> +#include "arm_big_little.h"
> +
> +/* Currently we support only two clusters */
> +#define MAX_CLUSTERS 2
Why? Because that is what the define is or there are other limitations?
Seems like this could and should be dynamically discovered with DT.
Rob
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists