| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1364313298-17336-18-git-send-email-jiang.liu@huawei.com>
Date: Tue, 26 Mar 2013 23:54:36 +0800
From: Jiang Liu <liuj97@...il.com>
To: Andrew Morton <akpm@...ux-foundation.org>,
David Rientjes <rientjes@...gle.com>
Cc: Jiang Liu <jiang.liu@...wei.com>,
Wen Congyang <wency@...fujitsu.com>,
Mel Gorman <mgorman@...e.de>, Minchan Kim <minchan@...nel.org>,
KAMEZAWA Hiroyuki <kamezawa.hiroyu@...fujitsu.com>,
Michal Hocko <mhocko@...e.cz>,
James Bottomley <James.Bottomley@...senPartnership.com>,
Sergei Shtylyov <sergei.shtylyov@...entembedded.com>,
David Howells <dhowells@...hat.com>,
Mark Salter <msalter@...hat.com>,
Jianguo Wu <wujianguo@...wei.com>, linux-mm@...ck.org,
linux-arch@...r.kernel.org, linux-kernel@...r.kernel.org,
Andi Kleen <ak@...ux.intel.com>,
Geert Uytterhoeven <geert@...ux-m68k.org>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Subject: [PATCH v3, part4 17/39] mm/frv: prepare for removing num_physpages and simplify mem_init()
Prepare for removing num_physpages and simplify mem_init().
Signed-off-by: Jiang Liu <jiang.liu@...wei.com>
Cc: David Howells <dhowells@...hat.com>
Cc: Andi Kleen <ak@...ux.intel.com>
Cc: Geert Uytterhoeven <geert@...ux-m68k.org>
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Cc: linux-kernel@...r.kernel.org
---
Hi all,
Sorry for my mistake that my previous patch series has been screwed up.
So I regenerate a third version and also set up a git tree at:
git://github.com/jiangliu/linux.git mem_init
Any help to review and test are welcomed!
Regards!
Gerry
---
arch/frv/kernel/setup.c | 14 +++++++-------
arch/frv/mm/init.c | 49 ++++++++++++++---------------------------------
2 files changed, 21 insertions(+), 42 deletions(-)
diff --git a/arch/frv/kernel/setup.c b/arch/frv/kernel/setup.c
index a513647..beee5d7 100644
--- a/arch/frv/kernel/setup.c
+++ b/arch/frv/kernel/setup.c
@@ -875,7 +875,7 @@ late_initcall(setup_arch_serial);
#ifdef CONFIG_MMU
static void __init setup_linux_memory(void)
{
- unsigned long bootmap_size, low_top_pfn, kstart, kend, high_mem;
+ unsigned long bootmap_size, low_top_pfn, kstart, kend, high_mem, physpages;
kstart = (unsigned long) &__kernel_image_start - PAGE_OFFSET;
kend = (unsigned long) &__kernel_image_end - PAGE_OFFSET;
@@ -893,19 +893,19 @@ static void __init setup_linux_memory(void)
);
/* pass the memory that the kernel can immediately use over to the bootmem allocator */
- max_mapnr = num_physpages = (memory_end - memory_start) >> PAGE_SHIFT;
+ max_mapnr = physpages = (memory_end - memory_start) >> PAGE_SHIFT;
low_top_pfn = (KERNEL_LOWMEM_END - KERNEL_LOWMEM_START) >> PAGE_SHIFT;
high_mem = 0;
- if (num_physpages > low_top_pfn) {
+ if (physpages > low_top_pfn) {
#ifdef CONFIG_HIGHMEM
- high_mem = num_physpages - low_top_pfn;
+ high_mem = physpages - low_top_pfn;
#else
- max_mapnr = num_physpages = low_top_pfn;
+ max_mapnr = physpages = low_top_pfn;
#endif
}
else {
- low_top_pfn = num_physpages;
+ low_top_pfn = physpages;
}
min_low_pfn = memory_start >> PAGE_SHIFT;
@@ -979,7 +979,7 @@ static void __init setup_uclinux_memory(void)
free_bootmem(memory_start, memory_end - memory_start);
high_memory = (void *) (memory_end & PAGE_MASK);
- max_mapnr = num_physpages = ((unsigned long) high_memory - PAGE_OFFSET) >> PAGE_SHIFT;
+ max_mapnr = ((unsigned long) high_memory - PAGE_OFFSET) >> PAGE_SHIFT;
min_low_pfn = memory_start >> PAGE_SHIFT;
max_low_pfn = memory_end >> PAGE_SHIFT;
diff --git a/arch/frv/mm/init.c b/arch/frv/mm/init.c
index 4215822..e9e2b6f 100644
--- a/arch/frv/mm/init.c
+++ b/arch/frv/mm/init.c
@@ -78,7 +78,7 @@ void __init paging_init(void)
memset((void *) empty_zero_page, 0, PAGE_SIZE);
#ifdef CONFIG_HIGHMEM
- if (num_physpages - num_mappedpages) {
+ if (get_num_physpages() - num_mappedpages) {
pgd_t *pge;
pud_t *pue;
pmd_t *pme;
@@ -96,7 +96,7 @@ void __init paging_init(void)
*/
zones_size[ZONE_NORMAL] = max_low_pfn - min_low_pfn;
#ifdef CONFIG_HIGHMEM
- zones_size[ZONE_HIGHMEM] = num_physpages - num_mappedpages;
+ zones_size[ZONE_HIGHMEM] = get_num_physpages() - num_mappedpages;
#endif
free_area_init(zones_size);
@@ -114,45 +114,24 @@ void __init paging_init(void)
*/
void __init mem_init(void)
{
- unsigned long npages = (memory_end - memory_start) >> PAGE_SHIFT;
- unsigned long tmp;
-#ifdef CONFIG_MMU
- unsigned long loop, pfn;
- int datapages = 0;
-#endif
- int codek = 0, datak = 0;
+ unsigned long code_size = _etext - _stext;
/* this will put all low memory onto the freelists */
free_all_bootmem();
+#if defined(CONFIG_MMU) && defined(CONFIG_HIGHMEM)
+ {
+ unsigned long pfn;
-#ifdef CONFIG_MMU
- for (loop = 0 ; loop < npages ; loop++)
- if (PageReserved(&mem_map[loop]))
- datapages++;
-
-#ifdef CONFIG_HIGHMEM
- for (pfn = num_physpages - 1; pfn >= num_mappedpages; pfn--)
- free_highmem_page(&mem_map[pfn]);
-#endif
-
- codek = ((unsigned long) &_etext - (unsigned long) &_stext) >> 10;
- datak = datapages << (PAGE_SHIFT - 10);
-
-#else
- codek = (_etext - _stext) >> 10;
- datak = 0; //(__bss_stop - _sdata) >> 10;
+ for (pfn = get_num_physpages() - 1;
+ pfn >= num_mappedpages; pfn--)
+ free_highmem_page(&mem_map[pfn]);
+ }
#endif
- tmp = nr_free_pages() << PAGE_SHIFT;
- printk("Memory available: %luKiB/%luKiB RAM, %luKiB/%luKiB ROM (%dKiB kernel code, %dKiB data)\n",
- tmp >> 10,
- npages << (PAGE_SHIFT - 10),
- (rom_length > 0) ? ((rom_length >> 10) - codek) : 0,
- rom_length >> 10,
- codek,
- datak
- );
-
+ mem_init_print_info(NULL);
+ if (rom_length > 0 && rom_length >= code_size)
+ printk("Memory available: %luKiB/%luKiB ROM\n",
+ (rom_length - code_size) >> 10, rom_length >> 10);
} /* end mem_init() */
/*****************************************************************************/
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists