lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:	Fri, 29 Mar 2013 11:44:09 +0100
From:	Stefan Richter <stefanr@...6.in-berlin.de>
To:	Stefan Richter <stefanr@...6.in-berlin.de>
Cc:	Peter Hurley <peter@...leysoftware.com>,
	linux1394-devel@...ts.sourceforge.net,
	linux-kernel@...r.kernel.org, Clemens Ladisch <clemens@...isch.de>
Subject: Re: [PATCH] firewire: Enable physical DMA above 4GB

On Mar 26 Stefan Richter wrote:
> On Mar 26 Peter Hurley wrote:
> > On Tue, 2013-03-26 at 19:56 +0100, Stefan Richter wrote:
> > > It has been a long time though since I last checked whether PhyUpperBound
> > > is implemented; maybe it has become more widespread than it was back then.
> > > 
> > > Or maybe it hasn't:  All OHCI-1394 chips that ever came to market are 32
> > > bit chips anyway.  So the few rare ones that do support PhyUpperBound
> > > larger than 4 GB cannot in fact use it.
> > > 
> > > Or am I severely behind the times about this?
> > 
> > The FW643e-2 is natively PCIe (not behind a bridge) and supports phys
> > DMA past 4GB (the datasheet says all 48 bits but I can only test it out
> > to 10GB).
> > 
> > I thought the FW643e was as well? You'll have to test that out :)
> 
> OK, will do.

Does lspci or something similar show which PCI devices are capable of 64 bit
wide addressing?
-- 
Stefan Richter
-=====-===-= --== ===-=
http://arcgraph.de/sr/
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ