| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1364978713-19612-4-git-send-email-fabio.baltieri@linaro.org>
Date: Wed, 3 Apr 2013 10:45:04 +0200
From: Fabio Baltieri <fabio.baltieri@...aro.org>
To: Felipe Balbi <balbi@...com>
Cc: Linus Walleij <linus.walleij@...aro.org>,
Praveena Nadahally <praveen.nadahally@...ricsson.com>,
linux-kernel@...r.kernel.org, linux-usb@...r.kernel.org,
Sakethram Bommisetti <sakethram.bommisetti@...ricsson.com>,
Fabio Baltieri <fabio.baltieri@...aro.org>
Subject: [PATCH 03/12] usb: phy: ab8500-usb: set phy tuning values
From: Sakethram Bommisetti <sakethram.bommisetti@...ricsson.com>
Set phy tuning values proposed by the hardware teams for AB8500 and
AB8505 to improve USB eye diagram performances.
Signed-off-by: Sakethram Bommisetti <sakethram.bommisetti@...ricsson.com>
Acked-by: Linus Walleij <linus.walleij@...aro.org>
Signed-off-by: Fabio Baltieri <fabio.baltieri@...aro.org>
---
drivers/usb/phy/phy-ab8500-usb.c | 87 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 87 insertions(+)
diff --git a/drivers/usb/phy/phy-ab8500-usb.c b/drivers/usb/phy/phy-ab8500-usb.c
index ab6dd07..5b92a59 100644
--- a/drivers/usb/phy/phy-ab8500-usb.c
+++ b/drivers/usb/phy/phy-ab8500-usb.c
@@ -33,11 +33,22 @@
#include <linux/mfd/abx500/ab8500.h>
#include <linux/usb/musb-ux500.h>
+/* Bank AB8500_SYS_CTRL2_BLOCK */
#define AB8500_MAIN_WD_CTRL_REG 0x01
+
+/* Bank AB8500_USB */
#define AB8500_USB_LINE_STAT_REG 0x80
#define AB8505_USB_LINE_STAT_REG 0x94
#define AB8500_USB_PHY_CTRL_REG 0x8A
+/* Bank AB8500_DEVELOPMENT */
+#define AB8500_BANK12_ACCESS 0x00
+
+/* Bank AB8500_DEBUG */
+#define AB8500_USB_PHY_TUNE1 0x05
+#define AB8500_USB_PHY_TUNE2 0x06
+#define AB8500_USB_PHY_TUNE3 0x07
+
#define AB8500_BIT_OTG_STAT_ID (1 << 0)
#define AB8500_BIT_PHY_CTRL_HOST_EN (1 << 0)
#define AB8500_BIT_PHY_CTRL_DEVICE_EN (1 << 1)
@@ -671,6 +682,82 @@ static int ab8500_usb_probe(struct platform_device *pdev)
return err;
}
+ /* Phy tuning values for AB8500 */
+ if (!is_ab8500_2p0_or_earlier(ab->ab8500)) {
+ /* Enable the PBT/Bank 0x12 access */
+ err = abx500_set_register_interruptible(ab->dev,
+ AB8500_DEVELOPMENT, AB8500_BANK12_ACCESS, 0x01);
+ if (err < 0)
+ dev_err(ab->dev, "Failed to enable bank12 access err=%d\n",
+ err);
+
+ err = abx500_set_register_interruptible(ab->dev,
+ AB8500_DEBUG, AB8500_USB_PHY_TUNE1, 0xC8);
+ if (err < 0)
+ dev_err(ab->dev, "Failed to set PHY_TUNE1 register err=%d\n",
+ err);
+
+ err = abx500_set_register_interruptible(ab->dev,
+ AB8500_DEBUG, AB8500_USB_PHY_TUNE2, 0x00);
+ if (err < 0)
+ dev_err(ab->dev, "Failed to set PHY_TUNE2 register err=%d\n",
+ err);
+
+ err = abx500_set_register_interruptible(ab->dev,
+ AB8500_DEBUG, AB8500_USB_PHY_TUNE3, 0x78);
+ if (err < 0)
+ dev_err(ab->dev, "Failed to set PHY_TUNE3 regester err=%d\n",
+ err);
+
+ /* Switch to normal mode/disable Bank 0x12 access */
+ err = abx500_set_register_interruptible(ab->dev,
+ AB8500_DEVELOPMENT, AB8500_BANK12_ACCESS, 0x00);
+ if (err < 0)
+ dev_err(ab->dev, "Failed to switch bank12 access err=%d\n",
+ err);
+ }
+
+ /* Phy tuning values for AB8505 */
+ if (is_ab8505(ab->ab8500)) {
+ /* Enable the PBT/Bank 0x12 access */
+ err = abx500_mask_and_set_register_interruptible(ab->dev,
+ AB8500_DEVELOPMENT, AB8500_BANK12_ACCESS,
+ 0x01, 0x01);
+ if (err < 0)
+ dev_err(ab->dev, "Failed to enable bank12 access err=%d\n",
+ err);
+
+ err = abx500_mask_and_set_register_interruptible(ab->dev,
+ AB8500_DEBUG, AB8500_USB_PHY_TUNE1,
+ 0xC8, 0xC8);
+ if (err < 0)
+ dev_err(ab->dev, "Failed to set PHY_TUNE1 register err=%d\n",
+ err);
+
+ err = abx500_mask_and_set_register_interruptible(ab->dev,
+ AB8500_DEBUG, AB8500_USB_PHY_TUNE2,
+ 0x60, 0x60);
+ if (err < 0)
+ dev_err(ab->dev, "Failed to set PHY_TUNE2 register err=%d\n",
+ err);
+
+ err = abx500_mask_and_set_register_interruptible(ab->dev,
+ AB8500_DEBUG, AB8500_USB_PHY_TUNE3,
+ 0xFC, 0x80);
+
+ if (err < 0)
+ dev_err(ab->dev, "Failed to set PHY_TUNE3 regester err=%d\n",
+ err);
+
+ /* Switch to normal mode/disable Bank 0x12 access */
+ err = abx500_mask_and_set_register_interruptible(ab->dev,
+ AB8500_DEVELOPMENT, AB8500_BANK12_ACCESS,
+ 0x00, 0x00);
+ if (err < 0)
+ dev_err(ab->dev, "Failed to switch bank12 access err=%d\n",
+ err);
+ }
+
/* Needed to enable ID detection. */
ab8500_usb_wd_workaround(ab);
--
1.8.1.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists