| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 5 Apr 2013 17:39:56 +0800
From: Tang Chen <tangchen@...fujitsu.com>
To: rob@...dley.net, tglx@...utronix.de, mingo@...hat.com,
hpa@...or.com, yinghai@...nel.org, akpm@...ux-foundation.org,
wency@...fujitsu.com, trenn@...e.de, liwanp@...ux.vnet.ibm.com,
mgorman@...e.de, walken@...gle.com, riel@...hat.com,
khlebnikov@...nvz.org, tj@...nel.org, minchan@...nel.org,
m.szyprowski@...sung.com, mina86@...a86.com, laijs@...fujitsu.com,
isimatu.yasuaki@...fujitsu.com, linfeng@...fujitsu.com,
kosaki.motohiro@...fujitsu.com, jiang.liu@...wei.com,
guz.fnst@...fujitsu.com
Cc: x86@...nel.org, linux-doc@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-mm@...ck.org
Subject: [PATCH 06/11] X86, numa, acpi, memory-hotplug: Add hotpluggable ranges to movablemem_map.
When parsing SRAT, we are able to know which memory ranges are hotpluggable,
and we add them to movablemem_map. So movablemem_map could be used to prevent
memblock from allocating memory in area which will be set as ZONE_MOVABLE later.
Signed-off-by: Tang Chen <tangchen@...fujitsu.com>
---
arch/x86/mm/numa.c | 39 ++++++++++++++++++++++
include/linux/mm.h | 4 ++
mm/page_alloc.c | 92 ++++++++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 135 insertions(+), 0 deletions(-)
diff --git a/arch/x86/mm/numa.c b/arch/x86/mm/numa.c
index 26d1800..73e7934 100644
--- a/arch/x86/mm/numa.c
+++ b/arch/x86/mm/numa.c
@@ -725,6 +725,43 @@ static void __init early_x86_numa_init_mapping(void)
}
#endif
+#ifdef CONFIG_HAVE_MEMBLOCK_NODE_MAP
+/**
+ * early_mem_hotplug_init - Add hotpluggable memory ranges to movablemem_map.
+ *
+ * This function scan numa_meminfo.blk[], and add all the hotpluggable memory
+ * ranges to movablemem_map. movablemem_map can be used to prevent memblock
+ * from allocating memory in area which will be set as ZONE_MOVABLE later, so
+ * this function should be called after memory mapping is initialized because
+ * we will put pagetable pages in local node even if the memory of that node is
+ * hotpluggable.
+ *
+ * If users specify movablemem_map=acpi, then:
+ *
+ * SRAT: |_____| |_____| |_________| |_________| ......
+ * node id: 0 1 1 2
+ * hotpluggable: n y y n
+ * movablemem_map: |_____| |_________|
+ */
+static void __init early_mem_hotplug_init()
+{
+ int i;
+
+ if (!movablemem_map.acpi)
+ return;
+
+ for (i = 0; i < numa_meminfo.nr_blks; i++) {
+ if (numa_meminfo.blk[i].hotpluggable)
+ movablemem_map_add_region(numa_meminfo.blk[i].start,
+ numa_meminfo.blk[i].end);
+ }
+}
+#else /* CONFIG_HAVE_MEMBLOCK_NODE_MAP */
+static inline void early_mem_hotplug_init()
+{
+}
+#endif /* CONFIG_HAVE_MEMBLOCK_NODE_MAP */
+
void __init early_initmem_init(void)
{
early_x86_numa_init();
@@ -734,6 +771,8 @@ void __init early_initmem_init(void)
load_cr3(swapper_pg_dir);
__flush_tlb_all();
+ early_mem_hotplug_init();
+
early_memtest(0, max_pfn_mapped<<PAGE_SHIFT);
}
diff --git a/include/linux/mm.h b/include/linux/mm.h
index 52c3558..7468221 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -1344,6 +1344,10 @@ struct movablemem_map {
struct movablemem_entry map[MOVABLEMEM_MAP_MAX];
};
+extern struct movablemem_map movablemem_map;
+
+extern void __init movablemem_map_add_region(u64 start, u64 size);
+
#endif /* CONFIG_HAVE_MEMBLOCK_NODE_MAP */
#if !defined(CONFIG_HAVE_MEMBLOCK_NODE_MAP) && \
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 475fd8b..2a7904f 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -5068,6 +5068,98 @@ early_param("kernelcore", cmdline_parse_kernelcore);
early_param("movablecore", cmdline_parse_movablecore);
/**
+ * insert_movablemem_map - Insert a memory range in to movablemem_map.map.
+ * @start_pfn: start pfn of the range
+ * @end_pfn: end pfn of the range
+ *
+ * This function will also merge the overlapped ranges, and sort the array
+ * by start_pfn in monotonic increasing order.
+ */
+static void __init insert_movablemem_map(unsigned long start_pfn,
+ unsigned long end_pfn)
+{
+ int pos, overlap;
+
+ /*
+ * pos will be at the 1st overlapped range, or the position
+ * where the element should be inserted.
+ */
+ for (pos = 0; pos < movablemem_map.nr_map; pos++)
+ if (start_pfn <= movablemem_map.map[pos].end_pfn)
+ break;
+
+ /* If there is no overlapped range, just insert the element. */
+ if (pos == movablemem_map.nr_map ||
+ end_pfn < movablemem_map.map[pos].start_pfn) {
+ /*
+ * If pos is not the end of array, we need to move all
+ * the rest elements backward.
+ */
+ if (pos < movablemem_map.nr_map)
+ memmove(&movablemem_map.map[pos+1],
+ &movablemem_map.map[pos],
+ sizeof(struct movablemem_entry) *
+ (movablemem_map.nr_map - pos));
+ movablemem_map.map[pos].start_pfn = start_pfn;
+ movablemem_map.map[pos].end_pfn = end_pfn;
+ movablemem_map.nr_map++;
+ return;
+ }
+
+ /* overlap will be at the last overlapped range */
+ for (overlap = pos + 1; overlap < movablemem_map.nr_map; overlap++)
+ if (end_pfn < movablemem_map.map[overlap].start_pfn)
+ break;
+
+ /*
+ * If there are more ranges overlapped, we need to merge them,
+ * and move the rest elements forward.
+ */
+ overlap--;
+ movablemem_map.map[pos].start_pfn = min(start_pfn,
+ movablemem_map.map[pos].start_pfn);
+ movablemem_map.map[pos].end_pfn = max(end_pfn,
+ movablemem_map.map[overlap].end_pfn);
+
+ if (pos != overlap && overlap + 1 != movablemem_map.nr_map)
+ memmove(&movablemem_map.map[pos+1],
+ &movablemem_map.map[overlap+1],
+ sizeof(struct movablemem_entry) *
+ (movablemem_map.nr_map - overlap - 1));
+
+ movablemem_map.nr_map -= overlap - pos;
+}
+
+/**
+ * movablemem_map_add_region - Add a memory range into movablemem_map.
+ * @start: physical start address of range
+ * @end: physical end address of range
+ *
+ * This function transform the physical address into pfn, and then add the
+ * range into movablemem_map by calling insert_movablemem_map().
+ */
+void __init movablemem_map_add_region(u64 start, u64 size)
+{
+ unsigned long start_pfn, end_pfn;
+
+ /* In case size == 0 or start + size overflows */
+ if (start + size <= start)
+ return;
+
+ if (movablemem_map.nr_map >= ARRAY_SIZE(movablemem_map.map)) {
+ pr_err("movablemem_map: too many entries; "
+ "ignoring [mem %#010llx-%#010llx]\n",
+ (unsigned long long) start,
+ (unsigned long long) (start + size - 1));
+ return;
+ }
+
+ start_pfn = PFN_DOWN(start);
+ end_pfn = PFN_UP(start + size);
+ insert_movablemem_map(start_pfn, end_pfn);
+}
+
+/**
* cmdline_parse_movablemem_map - Parse boot option movablemem_map.
* @p: The boot option of the following format:
* movablemem_map=acpi
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists