| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1365434591-21569-3-git-send-email-lee.jones@linaro.org>
Date: Mon, 8 Apr 2013 16:23:09 +0100
From: Lee Jones <lee.jones@...aro.org>
To: linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Cc: arnd@...db.de, linus.walleij@...ricsson.com,
Lee Jones <lee.jones@...aro.org>,
Vinod Koul <vinod.koul@...el.com>, Dan Williams <djbw@...com>,
Per Forlin <per.forlin@...ricsson.com>
Subject: [PATCH 3/5] dmaengine: ste_dma40: Move default memcpy configs into the driver
There are only two default memcpy configurations used for the DMA40
driver; one for physical memcpy and one for logical memcpy. Instead
of invariably passing the same configurations though platform data,
we're moving them into the driver instead.
Cc: Vinod Koul <vinod.koul@...el.com>
Cc: Dan Williams <djbw@...com>
Cc: Per Forlin <per.forlin@...ricsson.com>
Signed-off-by: Lee Jones <lee.jones@...aro.org>
---
arch/arm/mach-ux500/devices-db8500.c | 28 -----------------------
drivers/dma/ste_dma40.c | 32 +++++++++++++++++++++++++--
include/linux/platform_data/dma-ste-dma40.h | 4 ----
3 files changed, 30 insertions(+), 34 deletions(-)
diff --git a/arch/arm/mach-ux500/devices-db8500.c b/arch/arm/mach-ux500/devices-db8500.c
index 2a63c19..c7da6e1 100644
--- a/arch/arm/mach-ux500/devices-db8500.c
+++ b/arch/arm/mach-ux500/devices-db8500.c
@@ -42,32 +42,6 @@ static struct resource dma40_resources[] = {
}
};
-/* Default configuration for physcial memcpy */
-struct stedma40_chan_cfg dma40_memcpy_conf_phy = {
- .mode = STEDMA40_MODE_PHYSICAL,
- .dir = STEDMA40_MEM_TO_MEM,
-
- .src_info.data_width = STEDMA40_BYTE_WIDTH,
- .src_info.psize = STEDMA40_PSIZE_PHY_1,
- .src_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
-
- .dst_info.data_width = STEDMA40_BYTE_WIDTH,
- .dst_info.psize = STEDMA40_PSIZE_PHY_1,
- .dst_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
-};
-/* Default configuration for logical memcpy */
-struct stedma40_chan_cfg dma40_memcpy_conf_log = {
- .dir = STEDMA40_MEM_TO_MEM,
-
- .src_info.data_width = STEDMA40_BYTE_WIDTH,
- .src_info.psize = STEDMA40_PSIZE_LOG_1,
- .src_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
-
- .dst_info.data_width = STEDMA40_BYTE_WIDTH,
- .dst_info.psize = STEDMA40_PSIZE_LOG_1,
- .dst_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
-};
-
/*
* Mapping between destination event lines and physical device address.
* The event line is tied to a device and therefore the address is constant.
@@ -150,8 +124,6 @@ static struct stedma40_platform_data dma40_plat_data = {
.dev_len = DB8500_DMA_NR_DEV,
.dev_rx = dma40_rx_map,
.dev_tx = dma40_tx_map,
- .memcpy_conf_phy = &dma40_memcpy_conf_phy,
- .memcpy_conf_log = &dma40_memcpy_conf_log,
.disabled_channels = {-1},
};
diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c
index 3ae5f99..ecca492 100644
--- a/drivers/dma/ste_dma40.c
+++ b/drivers/dma/ste_dma40.c
@@ -66,6 +66,34 @@ static int dma40_memcpy_channels[] = {
DB8500_DMA_MEMCPY_TX_5,
};
+/* Default configuration for physcial memcpy */
+struct stedma40_chan_cfg dma40_memcpy_conf_phy = {
+ .mode = STEDMA40_MODE_PHYSICAL,
+ .dir = STEDMA40_MEM_TO_MEM,
+
+ .src_info.data_width = STEDMA40_BYTE_WIDTH,
+ .src_info.psize = STEDMA40_PSIZE_PHY_1,
+ .src_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
+
+ .dst_info.data_width = STEDMA40_BYTE_WIDTH,
+ .dst_info.psize = STEDMA40_PSIZE_PHY_1,
+ .dst_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
+};
+
+/* Default configuration for logical memcpy */
+struct stedma40_chan_cfg dma40_memcpy_conf_log = {
+ .mode = STEDMA40_MODE_LOGICAL,
+ .dir = STEDMA40_MEM_TO_MEM,
+
+ .src_info.data_width = STEDMA40_BYTE_WIDTH,
+ .src_info.psize = STEDMA40_PSIZE_LOG_1,
+ .src_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
+
+ .dst_info.data_width = STEDMA40_BYTE_WIDTH,
+ .dst_info.psize = STEDMA40_PSIZE_LOG_1,
+ .dst_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
+};
+
/**
* enum 40_command - The different commands and/or statuses.
*
@@ -2023,13 +2051,13 @@ static int d40_config_memcpy(struct d40_chan *d40c)
dma_cap_mask_t cap = d40c->chan.device->cap_mask;
if (dma_has_cap(DMA_MEMCPY, cap) && !dma_has_cap(DMA_SLAVE, cap)) {
- d40c->dma_cfg = *d40c->base->plat_data->memcpy_conf_log;
+ d40c->dma_cfg = dma40_memcpy_conf_log;
d40c->dma_cfg.src_dev_type = STEDMA40_DEV_SRC_MEMORY;
d40c->dma_cfg.dst_dev_type = dma40_memcpy_channels[d40c->chan.chan_id];
} else if (dma_has_cap(DMA_MEMCPY, cap) &&
dma_has_cap(DMA_SLAVE, cap)) {
- d40c->dma_cfg = *d40c->base->plat_data->memcpy_conf_phy;
+ d40c->dma_cfg = dma40_memcpy_conf_phy;
} else {
chan_err(d40c, "No memcpy\n");
return -EINVAL;
diff --git a/include/linux/platform_data/dma-ste-dma40.h b/include/linux/platform_data/dma-ste-dma40.h
index a808784..869c571 100644
--- a/include/linux/platform_data/dma-ste-dma40.h
+++ b/include/linux/platform_data/dma-ste-dma40.h
@@ -141,8 +141,6 @@ struct stedma40_chan_cfg {
* @dev_len: length of dev_tx and dev_rx
* @dev_tx: mapping between destination event line and io address
* @dev_rx: mapping between source event line and io address
- * @memcpy_conf_phy: default configuration of physical channel memcpy
- * @memcpy_conf_log: default configuration of logical channel memcpy
* @disabled_channels: A vector, ending with -1, that marks physical channels
* that are for different reasons not available for the driver.
* @soft_lli_chans: A vector, that marks physical channels will use LLI by SW
@@ -160,8 +158,6 @@ struct stedma40_platform_data {
u32 dev_len;
const dma_addr_t *dev_tx;
const dma_addr_t *dev_rx;
- struct stedma40_chan_cfg *memcpy_conf_phy;
- struct stedma40_chan_cfg *memcpy_conf_log;
int disabled_channels[STEDMA40_MAX_PHYS];
int *soft_lli_chans;
int num_of_soft_lli_chans;
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists