| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 10 Apr 2013 16:58:30 +0300
From: Heikki Krogerus <heikki.krogerus@...ux.intel.com>
To: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Cc: linux-kernel@...r.kernel.org, linux-serial@...r.kernel.org
Subject: [PATCH 7/9] serial: 8250_dw: Let ACPI code extract the DMA client info
The new ACPI DMA helpers in dmaengine API can take care of
extracting all the necessary information regarding DMA. The
driver does not need to do this separately any more.
Signed-off-by: Heikki Krogerus <heikki.krogerus@...ux.intel.com>
---
drivers/tty/serial/8250/8250_dw.c | 75 +++++--------------------------------
1 file changed, 9 insertions(+), 66 deletions(-)
diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index de7a186..09aaea2 100644
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -163,66 +163,10 @@ static int dw8250_probe_of(struct uart_port *p)
}
#ifdef CONFIG_ACPI
-static bool dw8250_acpi_dma_filter(struct dma_chan *chan, void *parm)
-{
- return chan->chan_id == *(int *)parm;
-}
-
-static acpi_status
-dw8250_acpi_walk_resource(struct acpi_resource *res, void *data)
-{
- struct uart_port *p = data;
- struct uart_8250_port *port;
- struct uart_8250_dma *dma;
- struct acpi_resource_fixed_dma *fixed_dma;
- struct dma_slave_config *slave;
-
- port = container_of(p, struct uart_8250_port, port);
-
- switch (res->type) {
- case ACPI_RESOURCE_TYPE_FIXED_DMA:
- fixed_dma = &res->data.fixed_dma;
-
- /* TX comes first */
- if (!port->dma) {
- dma = devm_kzalloc(p->dev, sizeof(*dma), GFP_KERNEL);
- if (!dma)
- return AE_NO_MEMORY;
-
- port->dma = dma;
- slave = &dma->txconf;
-
- slave->direction = DMA_MEM_TO_DEV;
- slave->dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
- slave->slave_id = fixed_dma->request_lines;
- slave->dst_maxburst = port->tx_loadsz / 4;
-
- dma->tx_chan_id = fixed_dma->channels;
- dma->tx_param = &dma->tx_chan_id;
- dma->fn = dw8250_acpi_dma_filter;
- } else {
- dma = port->dma;
- slave = &dma->rxconf;
-
- slave->direction = DMA_DEV_TO_MEM;
- slave->src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
- slave->slave_id = fixed_dma->request_lines;
- slave->src_maxburst = p->fifosize / 4;
-
- dma->rx_chan_id = fixed_dma->channels;
- dma->rx_param = &dma->rx_chan_id;
- }
-
- break;
- }
-
- return AE_OK;
-}
-
-static int dw8250_probe_acpi(struct uart_port *p)
+static int dw8250_probe_acpi(struct uart_8250_port *up)
{
const struct acpi_device_id *id;
- acpi_status status;
+ struct uart_port *p = &up->port;
id = acpi_match_device(p->dev->driver->acpi_match_table, p->dev);
if (!id)
@@ -236,13 +180,12 @@ static int dw8250_probe_acpi(struct uart_port *p)
if (!p->uartclk)
p->uartclk = (unsigned int)id->driver_data;
- status = acpi_walk_resources(ACPI_HANDLE(p->dev), METHOD_NAME__CRS,
- dw8250_acpi_walk_resource, p);
- if (ACPI_FAILURE(status)) {
- dev_err_ratelimited(p->dev, "%s failed \"%s\"\n", __func__,
- acpi_format_exception(status));
- return -ENODEV;
- }
+ up->dma = devm_kzalloc(p->dev, sizeof(*up->dma), GFP_KERNEL);
+ if (!up->dma)
+ return -ENOMEM;
+
+ up->dma->rxconf.src_maxburst = p->fifosize / 4;
+ up->dma->txconf.dst_maxburst = p->fifosize / 4;
return 0;
}
@@ -329,7 +272,7 @@ static int dw8250_probe(struct platform_device *pdev)
if (err)
return err;
} else if (ACPI_HANDLE(&pdev->dev)) {
- err = dw8250_probe_acpi(&uart.port);
+ err = dw8250_probe_acpi(&uart);
if (err)
return err;
} else {
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists