linux-kernel - [PATCH 6/9] serial: 8250_dw: Support clk framework also with ACPI

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1365602312-25436-7-git-send-email-heikki.krogerus@linux.intel.com>
Date:	Wed, 10 Apr 2013 16:58:29 +0300
From:	Heikki Krogerus <heikki.krogerus@...ux.intel.com>
To:	Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Cc:	linux-kernel@...r.kernel.org, linux-serial@...r.kernel.org
Subject: [PATCH 6/9] serial: 8250_dw: Support clk framework also with ACPI

The Lynxpoint LPSS peripheral clocks are now handled in clk
framework so the drivers do not need to take care of them
manually. In dw8250_probe_acpi(), the uartclk is now taken
from the driver_data only if it was not already set.

Signed-off-by: Heikki Krogerus <heikki.krogerus@...ux.intel.com>
---
 drivers/tty/serial/8250/8250_dw.c |   18 +++++-------------
 1 file changed, 5 insertions(+), 13 deletions(-)

diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index d6aea85..de7a186 100644
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -36,9 +36,6 @@
 #define DW_UART_CPR	0xf4 /* Component Parameter Register */
 #define DW_UART_UCV	0xf8 /* UART Component Version */
 
-/* Intel Low Power Subsystem specific */
-#define LPSS_PRV_CLOCK_PARAMS 0x800
-
 /* Component Parameter Register bits */
 #define DW_UART_CPR_ABP_DATA_WIDTH	(3 << 0)
 #define DW_UART_CPR_AFCE_MODE		(1 << 4)
@@ -226,7 +223,6 @@ static int dw8250_probe_acpi(struct uart_port *p)
 {
 	const struct acpi_device_id *id;
 	acpi_status status;
-	u32 reg;
 
 	id = acpi_match_device(p->dev->driver->acpi_match_table, p->dev);
 	if (!id)
@@ -236,7 +232,9 @@ static int dw8250_probe_acpi(struct uart_port *p)
 	p->serial_in = dw8250_serial_in32;
 	p->serial_out = dw8250_serial_out32;
 	p->regshift = 2;
-	p->uartclk = (unsigned int)id->driver_data;
+
+	if (!p->uartclk)
+		p->uartclk = (unsigned int)id->driver_data;
 
 	status = acpi_walk_resources(ACPI_HANDLE(p->dev), METHOD_NAME__CRS,
 				     dw8250_acpi_walk_resource, p);
@@ -246,12 +244,6 @@ static int dw8250_probe_acpi(struct uart_port *p)
 		return -ENODEV;
 	}
 
-	/* Fix Haswell issue where the clocks do not get enabled */
-	if (!strcmp(id->id, "INT33C4") || !strcmp(id->id, "INT33C5")) {
-		reg = readl(p->membase + LPSS_PRV_CLOCK_PARAMS);
-		writel(reg | 1, p->membase + LPSS_PRV_CLOCK_PARAMS);
-	}
-
 	return 0;
 }
 #else
@@ -425,8 +417,8 @@ static const struct of_device_id dw8250_of_match[] = {
 MODULE_DEVICE_TABLE(of, dw8250_of_match);
 
 static const struct acpi_device_id dw8250_acpi_match[] = {
-	{ "INT33C4", 100000000 },
-	{ "INT33C5", 100000000 },
+	{ "INT33C4", 0 },
+	{ "INT33C5", 0 },
 	{ },
 };
 MODULE_DEVICE_TABLE(acpi, dw8250_acpi_match);
-- 
1.7.10.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/