| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20130410193432.GA25678@roeck-us.net>
Date: Wed, 10 Apr 2013 12:34:32 -0700
From: Guenter Roeck <linux@...ck-us.net>
To: Sebastian Hesselbarth <sebastian.hesselbarth@...il.com>
Cc: Grant Likely <grant.likely@...retlab.ca>,
Rob Herring <rob.herring@...xeda.com>,
Rob Landley <rob@...dley.net>,
Mike Turquette <mturquette@...aro.org>,
Stephen Warren <swarren@...dia.com>,
Thierry Reding <thierry.reding@...onic-design.de>,
Dom Cobley <popcornmix@...il.com>,
Linus Walleij <linus.walleij@...aro.org>,
Arnd Bergmann <arnd@...db.de>,
Andrew Morton <akpm@...ux-foundation.org>,
Pawel Moll <pawel.moll@....com>,
Mark Brown <broonie@...nsource.wolfsonmicro.com>,
Russell King - ARM Linux <linux@....linux.org.uk>,
Rabeeh Khoury <rabeeh@...id-run.com>,
Daniel Mack <zonque@...il.com>,
Jean-Francois Moine <moinejf@...e.fr>,
Lars-Peter Clausen <lars@...afoo.de>,
Michal Bachraty <michal.bachraty@...eamunlimited.com>,
devicetree-discuss@...ts.ozlabs.org, linux-doc@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH v7] clk: add si5351 i2c common clock driver
On Wed, Apr 10, 2013 at 11:40:10AM +0200, Sebastian Hesselbarth wrote:
> This patch adds a common clock driver for Silicon Labs Si5351a/b/c
> i2c programmable clock generators. Currently, the driver does not
> support VXCO feature of si5351b. Passing platform_data or DT bindings
> selectively allows to overwrite stored Si5351 configuration which is
> very helpful for clock generators with empty eeprom configuration.
> Corresponding device tree binding documentation is also added.
>
> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@...il.com>
> ---
> I consider this v7 now as feature complete. Please review/test a
> hopefully last time and add your Acked-By/Tested-By. Thanks!
>
> Changes from v6:
> - make invalid DT data parsing fatal (Suggested by Guenter Roeck)
> - add more variant checks and return errors
> - remove inline from _si5351_* functions
> - remove pll reset/clkout powerdown for gapless tuning
> (Provided by Michal Backraty)
>
> Changes from v5:
> - removed __clk_set_flags
> - remove CONFIG_OF dependency
> - introduce si5351_platform_data (non-DT untested)
> - parse DT into si5351_platform_data (tested)
> - minor cleanups
>
> Changes from v4:
> - move from clk-private.h to clk-provider.h (Reported by Mike Turquette)
> - use __clk_set_flags() helper
>
> Changes from v3:
> - add silabs prefix to custom DT properties (Reported by Lars-Peter Clausen)
> - use sizeof(*foo) instead of sizeof(struct bar) (Reported by Lars-Peter Clausen)
> - check return value of of_clk_add_provider (Reported by Lars-Peter Clausen)
> - clean up i2c client init (Reported by Lars-Peter Clausen)
> - silence successful probe (Suggested by Lars-Peter Clausen)
> - make CONFIG_CLK_SI5351 depend on CONFIG_OF
>
> Changes from v2:
> - add curly brackets to if-else-statements (Reported by Daniel Mack)
> - fix div-by-zero for clk6/clk7 (Reported by Daniel Mack)
> - fix parameter address calculation for clk6/clk7
>
> Changes from v1:
> - remove .is_enabled functions as they read from i2c
> (Reported by Daniel Mack)
> - add CLK_SET_RATE_PARENT on clkout reparent if clkout uses
> its own multisync
>
> Cc: Grant Likely <grant.likely@...retlab.ca>
> Cc: Rob Herring <rob.herring@...xeda.com>
> Cc: Rob Landley <rob@...dley.net>
> Cc: Mike Turquette <mturquette@...aro.org>
> Cc: Stephen Warren <swarren@...dia.com>
> Cc: Thierry Reding <thierry.reding@...onic-design.de>
> Cc: Dom Cobley <popcornmix@...il.com>
> Cc: Linus Walleij <linus.walleij@...aro.org>
> Cc: Arnd Bergmann <arnd@...db.de>
> Cc: Andrew Morton <akpm@...ux-foundation.org>
> Cc: Pawel Moll <pawel.moll@....com>
> Cc: Mark Brown <broonie@...nsource.wolfsonmicro.com>
> Cc: Russell King - ARM Linux <linux@....linux.org.uk>
> Cc: Rabeeh Khoury <rabeeh@...id-run.com>
> Cc: Daniel Mack <zonque@...il.com>
> Cc: Jean-Francois Moine <moinejf@...e.fr>
> Cc: Lars-Peter Clausen <lars@...afoo.de>
> Cc: Guenter Roeck <linux@...ck-us.net>
Acked-by: Guenter Roeck <linux@...ck-us.net>
> Cc: Michal Bachraty <michal.bachraty@...eamunlimited.com>
> Cc: devicetree-discuss@...ts.ozlabs.org
> Cc: linux-doc@...r.kernel.org
> Cc: linux-kernel@...r.kernel.org
> Cc: linux-arm-kernel@...ts.infradead.org
> ---
> .../devicetree/bindings/clock/silabs,si5351.txt | 114 ++
> .../devicetree/bindings/vendor-prefixes.txt | 1 +
> drivers/clk/Kconfig | 9 +
> drivers/clk/Makefile | 1 +
> drivers/clk/clk-si5351.c | 1506 ++++++++++++++++++++
> drivers/clk/clk-si5351.h | 155 ++
> include/linux/platform_data/si5351.h | 114 ++
> 7 files changed, 1900 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/clock/silabs,si5351.txt
> create mode 100644 drivers/clk/clk-si5351.c
> create mode 100644 drivers/clk/clk-si5351.h
> create mode 100644 include/linux/platform_data/si5351.h
>
> diff --git a/Documentation/devicetree/bindings/clock/silabs,si5351.txt b/Documentation/devicetree/bindings/clock/silabs,si5351.txt
> new file mode 100644
> index 0000000..cc37465
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/silabs,si5351.txt
> @@ -0,0 +1,114 @@
> +Binding for Silicon Labs Si5351a/b/c programmable i2c clock generator.
> +
> +Reference
> +[1] Si5351A/B/C Data Sheet
> + http://www.silabs.com/Support%20Documents/TechnicalDocs/Si5351.pdf
> +
> +The Si5351a/b/c are programmable i2c clock generators with upto 8 output
> +clocks. Si5351a also has a reduced pin-count package (MSOP10) where only
> +3 output clocks are accessible. The internal structure of the clock
> +generators can be found in [1].
> +
> +==I2C device node==
> +
> +Required properties:
> +- compatible: shall be one of "silabs,si5351{a,a-msop,b,c}".
> +- reg: i2c device address, shall be 0x60 or 0x61.
> +- #clock-cells: from common clock binding; shall be set to 1.
> +- clocks: from common clock binding; list of parent clock
> + handles, shall be xtal reference clock or xtal and clkin for
> + si5351c only.
> +- #address-cells: shall be set to 1.
> +- #size-cells: shall be set to 0.
> +
> +Optional properties:
> +- silabs,pll-source: pair of (number, source) for each pll. Allows
> + to overwrite clock source of pll A (number=0) or B (number=1).
> +
> +==Child nodes==
> +
> +Each of the clock outputs can be overwritten individually by
> +using a child node to the I2C device node. If a child node for a clock
> +output is not set, the eeprom configuration is not overwritten.
> +
> +Required child node properties:
> +- reg: number of clock output.
> +
> +Optional child node properties:
> +- silabs,clock-source: source clock of the output divider stage N, shall be
> + 0 = multisynth N
> + 1 = multisynth 0 for output clocks 0-3, else multisynth4
> + 2 = xtal
> + 3 = clkin (si5351c only)
> +- silabs,drive-strength: output drive strength in mA, shall be one of {2,4,6,8}.
> +- silabs,multisynth-source: source pll A(0) or B(1) of corresponding multisynth
> + divider.
> +- silabs,pll-master: boolean, multisynth can change pll frequency.
> +
> +==Example==
> +
> +/* 25MHz reference crystal */
> +ref25: ref25M {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <25000000>;
> +};
> +
> +i2c-master-node {
> +
> + /* Si5351a msop10 i2c clock generator */
> + si5351a: clock-generator@60 {
> + compatible = "silabs,si5351a-msop";
> + reg = <0x60>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + #clock-cells = <1>;
> +
> + /* connect xtal input to 25MHz reference */
> + clocks = <&ref25>;
> +
> + /* connect xtal input as source of pll0 and pll1 */
> + silabs,pll-source = <0 0>, <1 0>;
> +
> + /*
> + * overwrite clkout0 configuration with:
> + * - 8mA output drive strength
> + * - pll0 as clock source of multisynth0
> + * - multisynth0 as clock source of output divider
> + * - multisynth0 can change pll0
> + * - set initial clock frequency of 74.25MHz
> + */
> + clkout0 {
> + reg = <0>;
> + silabs,drive-strength = <8>;
> + silabs,multisynth-source = <0>;
> + silabs,clock-source = <0>;
> + silabs,pll-master;
> + clock-frequency = <74250000>;
> + };
> +
> + /*
> + * overwrite clkout1 configuration with:
> + * - 4mA output drive strength
> + * - pll1 as clock source of multisynth1
> + * - multisynth1 as clock source of output divider
> + * - multisynth1 can change pll1
> + */
> + clkout1 {
> + reg = <1>;
> + silabs,drive-strength = <4>;
> + silabs,multisynth-source = <1>;
> + silabs,clock-source = <0>;
> + pll-master;
> + };
> +
> + /*
> + * overwrite clkout2 configuration with:
> + * - xtal as clock source of output divider
> + */
> + clkout2 {
> + reg = <2>;
> + silabs,clock-source = <2>;
> + };
> + };
> +};
> diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
> index 19e1ef7..ca60849 100644
> --- a/Documentation/devicetree/bindings/vendor-prefixes.txt
> +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
> @@ -48,6 +48,7 @@ samsung Samsung Semiconductor
> sbs Smart Battery System
> schindler Schindler
> sil Silicon Image
> +silabs Silicon Laboratories
> simtek
> sirf SiRF Technology, Inc.
> snps Synopsys, Inc.
> diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
> index a47e6ee..5039e41 100644
> --- a/drivers/clk/Kconfig
> +++ b/drivers/clk/Kconfig
> @@ -55,6 +55,15 @@ config COMMON_CLK_MAX77686
> ---help---
> This driver supports Maxim 77686 crystal oscillator clock.
>
> +config COMMON_CLK_SI5351
> + tristate "Clock driver for SiLabs 5351A/B/C"
> + depends on I2C
> + select REGMAP_I2C
> + select RATIONAL
> + ---help---
> + This driver supports Silicon Labs 5351A/B/C programmable clock
> + generators.
> +
> config CLK_TWL6040
> tristate "External McPDM functional clock from twl6040"
> depends on TWL6040_CORE
> diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
> index 300d477..92ca698 100644
> --- a/drivers/clk/Makefile
> +++ b/drivers/clk/Makefile
> @@ -33,4 +33,5 @@ obj-$(CONFIG_X86) += x86/
> # Chip specific
> obj-$(CONFIG_COMMON_CLK_WM831X) += clk-wm831x.o
> obj-$(CONFIG_COMMON_CLK_MAX77686) += clk-max77686.o
> +obj-$(CONFIG_COMMON_CLK_SI5351) += clk-si5351.o
> obj-$(CONFIG_CLK_TWL6040) += clk-twl6040.o
> diff --git a/drivers/clk/clk-si5351.c b/drivers/clk/clk-si5351.c
> new file mode 100644
> index 0000000..4e2506c
> --- /dev/null
> +++ b/drivers/clk/clk-si5351.c
> @@ -0,0 +1,1506 @@
> +/*
> + * clk-si5351.c: Silicon Laboratories Si5351A/B/C I2C Clock Generator
> + *
> + * Sebastian Hesselbarth <sebastian.hesselbarth@...il.com>
> + * Rabeeh Khoury <rabeeh@...id-run.com>
> + *
> + * References:
> + * [1] "Si5351A/B/C Data Sheet"
> + * http://www.silabs.com/Support%20Documents/TechnicalDocs/Si5351.pdf
> + * [2] "Manually Generating an Si5351 Register Map"
> + * http://www.silabs.com/Support%20Documents/TechnicalDocs/AN619.pdf
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License as published by the
> + * Free Software Foundation; either version 2 of the License, or (at your
> + * option) any later version.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/kernel.h>
> +#include <linux/clkdev.h>
> +#include <linux/clk-provider.h>
> +#include <linux/delay.h>
> +#include <linux/err.h>
> +#include <linux/errno.h>
> +#include <linux/rational.h>
> +#include <linux/i2c.h>
> +#include <linux/of_platform.h>
> +#include <linux/platform_data/si5351.h>
> +#include <linux/regmap.h>
> +#include <linux/slab.h>
> +#include <linux/string.h>
> +#include <asm/div64.h>
> +
> +#include "clk-si5351.h"
> +
> +struct si5351_driver_data;
> +
> +struct si5351_parameters {
> + unsigned long p1;
> + unsigned long p2;
> + unsigned long p3;
> + int valid;
> +};
> +
> +struct si5351_hw_data {
> + struct clk_hw hw;
> + struct si5351_driver_data *drvdata;
> + struct si5351_parameters params;
> + unsigned char num;
> +};
> +
> +struct si5351_driver_data {
> + enum si5351_variant variant;
> + struct i2c_client *client;
> + struct regmap *regmap;
> + struct clk_onecell_data onecell;
> +
> + struct clk *pxtal;
> + const char *pxtal_name;
> + struct clk_hw xtal;
> + struct clk *pclkin;
> + const char *pclkin_name;
> + struct clk_hw clkin;
> +
> + struct si5351_hw_data pll[2];
> + struct si5351_hw_data *msynth;
> + struct si5351_hw_data *clkout;
> +};
> +
> +static const char const *si5351_input_names[] = {
> + "xtal", "clkin"
> +};
> +static const char const *si5351_pll_names[] = {
> + "plla", "pllb", "vxco"
> +};
> +static const char const *si5351_msynth_names[] = {
> + "ms0", "ms1", "ms2", "ms3", "ms4", "ms5", "ms6", "ms7"
> +};
> +static const char const *si5351_clkout_names[] = {
> + "clk0", "clk1", "clk2", "clk3", "clk4", "clk5", "clk6", "clk7"
> +};
> +
> +/*
> + * Si5351 i2c regmap
> + */
> +static inline u8 si5351_reg_read(struct si5351_driver_data *drvdata, u8 reg)
> +{
> + u32 val;
> + int ret;
> +
> + ret = regmap_read(drvdata->regmap, reg, &val);
> + if (ret) {
> + dev_err(&drvdata->client->dev,
> + "unable to read from reg%02x\n", reg);
> + return 0;
> + }
> +
> + return (u8)val;
> +}
> +
> +static inline int si5351_bulk_read(struct si5351_driver_data *drvdata,
> + u8 reg, u8 count, u8 *buf)
> +{
> + return regmap_bulk_read(drvdata->regmap, reg, buf, count);
> +}
> +
> +static inline int si5351_reg_write(struct si5351_driver_data *drvdata,
> + u8 reg, u8 val)
> +{
> + return regmap_write(drvdata->regmap, reg, val);
> +}
> +
> +static inline int si5351_bulk_write(struct si5351_driver_data *drvdata,
> + u8 reg, u8 count, const u8 *buf)
> +{
> + return regmap_raw_write(drvdata->regmap, reg, buf, count);
> +}
> +
> +static inline int si5351_set_bits(struct si5351_driver_data *drvdata,
> + u8 reg, u8 mask, u8 val)
> +{
> + return regmap_update_bits(drvdata->regmap, reg, mask, val);
> +}
> +
> +static inline u8 si5351_msynth_params_address(int num)
> +{
> + if (num > 5)
> + return SI5351_CLK6_PARAMETERS + (num - 6);
> + return SI5351_CLK0_PARAMETERS + (SI5351_PARAMETERS_LENGTH * num);
> +}
> +
> +static void si5351_read_parameters(struct si5351_driver_data *drvdata,
> + u8 reg, struct si5351_parameters *params)
> +{
> + u8 buf[SI5351_PARAMETERS_LENGTH];
> +
> + switch (reg) {
> + case SI5351_CLK6_PARAMETERS:
> + case SI5351_CLK7_PARAMETERS:
> + buf[0] = si5351_reg_read(drvdata, reg);
> + params->p1 = buf[0];
> + params->p2 = 0;
> + params->p3 = 1;
> + break;
> + default:
> + si5351_bulk_read(drvdata, reg, SI5351_PARAMETERS_LENGTH, buf);
> + params->p1 = ((buf[2] & 0x03) << 16) | (buf[3] << 8) | buf[4];
> + params->p2 = ((buf[5] & 0x0f) << 16) | (buf[6] << 8) | buf[7];
> + params->p3 = ((buf[5] & 0xf0) << 12) | (buf[0] << 8) | buf[1];
> + }
> + params->valid = 1;
> +}
> +
> +static void si5351_write_parameters(struct si5351_driver_data *drvdata,
> + u8 reg, struct si5351_parameters *params)
> +{
> + u8 buf[SI5351_PARAMETERS_LENGTH];
> +
> + switch (reg) {
> + case SI5351_CLK6_PARAMETERS:
> + case SI5351_CLK7_PARAMETERS:
> + buf[0] = params->p1 & 0xff;
> + si5351_reg_write(drvdata, reg, buf[0]);
> + break;
> + default:
> + buf[0] = ((params->p3 & 0x0ff00) >> 8) & 0xff;
> + buf[1] = params->p3 & 0xff;
> + /* save rdiv and divby4 */
> + buf[2] = si5351_reg_read(drvdata, reg + 2) & ~0x03;
> + buf[2] |= ((params->p1 & 0x30000) >> 16) & 0x03;
> + buf[3] = ((params->p1 & 0x0ff00) >> 8) & 0xff;
> + buf[4] = params->p1 & 0xff;
> + buf[5] = ((params->p3 & 0xf0000) >> 12) |
> + ((params->p2 & 0xf0000) >> 16);
> + buf[6] = ((params->p2 & 0x0ff00) >> 8) & 0xff;
> + buf[7] = params->p2 & 0xff;
> + si5351_bulk_write(drvdata, reg, SI5351_PARAMETERS_LENGTH, buf);
> + }
> +}
> +
> +static bool si5351_regmap_is_volatile(struct device *dev, unsigned int reg)
> +{
> + switch (reg) {
> + case SI5351_DEVICE_STATUS:
> + case SI5351_INTERRUPT_STATUS:
> + case SI5351_PLL_RESET:
> + return true;
> + }
> + return false;
> +}
> +
> +static bool si5351_regmap_is_writeable(struct device *dev, unsigned int reg)
> +{
> + /* reserved registers */
> + if (reg >= 4 && reg <= 8)
> + return false;
> + if (reg >= 10 && reg <= 14)
> + return false;
> + if (reg >= 173 && reg <= 176)
> + return false;
> + if (reg >= 178 && reg <= 182)
> + return false;
> + /* read-only */
> + if (reg == SI5351_DEVICE_STATUS)
> + return false;
> + return true;
> +}
> +
> +static struct regmap_config si5351_regmap_config = {
> + .reg_bits = 8,
> + .val_bits = 8,
> + .cache_type = REGCACHE_RBTREE,
> + .max_register = 187,
> + .writeable_reg = si5351_regmap_is_writeable,
> + .volatile_reg = si5351_regmap_is_volatile,
> +};
> +
> +/*
> + * Si5351 xtal clock input
> + */
> +static int si5351_xtal_prepare(struct clk_hw *hw)
> +{
> + struct si5351_driver_data *drvdata =
> + container_of(hw, struct si5351_driver_data, xtal);
> + si5351_set_bits(drvdata, SI5351_FANOUT_ENABLE,
> + SI5351_XTAL_ENABLE, SI5351_XTAL_ENABLE);
> + return 0;
> +}
> +
> +static void si5351_xtal_unprepare(struct clk_hw *hw)
> +{
> + struct si5351_driver_data *drvdata =
> + container_of(hw, struct si5351_driver_data, xtal);
> + si5351_set_bits(drvdata, SI5351_FANOUT_ENABLE,
> + SI5351_XTAL_ENABLE, 0);
> +}
> +
> +static const struct clk_ops si5351_xtal_ops = {
> + .prepare = si5351_xtal_prepare,
> + .unprepare = si5351_xtal_unprepare,
> +};
> +
> +/*
> + * Si5351 clkin clock input (Si5351C only)
> + */
> +static int si5351_clkin_prepare(struct clk_hw *hw)
> +{
> + struct si5351_driver_data *drvdata =
> + container_of(hw, struct si5351_driver_data, clkin);
> + si5351_set_bits(drvdata, SI5351_FANOUT_ENABLE,
> + SI5351_CLKIN_ENABLE, SI5351_CLKIN_ENABLE);
> + return 0;
> +}
> +
> +static void si5351_clkin_unprepare(struct clk_hw *hw)
> +{
> + struct si5351_driver_data *drvdata =
> + container_of(hw, struct si5351_driver_data, clkin);
> + si5351_set_bits(drvdata, SI5351_FANOUT_ENABLE,
> + SI5351_CLKIN_ENABLE, 0);
> +}
> +
> +/*
> + * CMOS clock source constraints:
> + * The input frequency range of the PLL is 10Mhz to 40MHz.
> + * If CLKIN is >40MHz, the input divider must be used.
> + */
> +static unsigned long si5351_clkin_recalc_rate(struct clk_hw *hw,
> + unsigned long parent_rate)
> +{
> + struct si5351_driver_data *drvdata =
> + container_of(hw, struct si5351_driver_data, clkin);
> + unsigned long rate;
> + unsigned char idiv;
> +
> + rate = parent_rate;
> + if (parent_rate > 160000000) {
> + idiv = SI5351_CLKIN_DIV_8;
> + rate /= 8;
> + } else if (parent_rate > 80000000) {
> + idiv = SI5351_CLKIN_DIV_4;
> + rate /= 4;
> + } else if (parent_rate > 40000000) {
> + idiv = SI5351_CLKIN_DIV_2;
> + rate /= 2;
> + } else {
> + idiv = SI5351_CLKIN_DIV_1;
> + }
> +
> + si5351_set_bits(drvdata, SI5351_PLL_INPUT_SOURCE,
> + SI5351_CLKIN_DIV_MASK, idiv);
> +
> + dev_dbg(&drvdata->client->dev, "%s - clkin div = %d, rate = %lu\n",
> + __func__, (1 << (idiv >> 6)), rate);
> +
> + return rate;
> +}
> +
> +static const struct clk_ops si5351_clkin_ops = {
> + .prepare = si5351_clkin_prepare,
> + .unprepare = si5351_clkin_unprepare,
> + .recalc_rate = si5351_clkin_recalc_rate,
> +};
> +
> +/*
> + * Si5351 vxco clock input (Si5351B only)
> + */
> +
> +static int si5351_vxco_prepare(struct clk_hw *hw)
> +{
> + struct si5351_hw_data *hwdata =
> + container_of(hw, struct si5351_hw_data, hw);
> +
> + dev_warn(&hwdata->drvdata->client->dev, "VXCO currently unsupported\n");
> +
> + return 0;
> +}
> +
> +static void si5351_vxco_unprepare(struct clk_hw *hw)
> +{
> +}
> +
> +static unsigned long si5351_vxco_recalc_rate(struct clk_hw *hw,
> + unsigned long parent_rate)
> +{
> + return 0;
> +}
> +
> +static int si5351_vxco_set_rate(struct clk_hw *hw, unsigned long rate,
> + unsigned long parent)
> +{
> + return 0;
> +}
> +
> +static const struct clk_ops si5351_vxco_ops = {
> + .prepare = si5351_vxco_prepare,
> + .unprepare = si5351_vxco_unprepare,
> + .recalc_rate = si5351_vxco_recalc_rate,
> + .set_rate = si5351_vxco_set_rate,
> +};
> +
> +/*
> + * Si5351 pll a/b
> + *
> + * Feedback Multisynth Divider Equations [2]
> + *
> + * fVCO = fIN * (a + b/c)
> + *
> + * with 15 + 0/1048575 <= (a + b/c) <= 90 + 0/1048575 and
> + * fIN = fXTAL or fIN = fCLKIN/CLKIN_DIV
> + *
> + * Feedback Multisynth Register Equations
> + *
> + * (1) MSNx_P1[17:0] = 128 * a + floor(128 * b/c) - 512
> + * (2) MSNx_P2[19:0] = 128 * b - c * floor(128 * b/c) = (128*b) mod c
> + * (3) MSNx_P3[19:0] = c
> + *
> + * Transposing (2) yields: (4) floor(128 * b/c) = (128 * b / MSNx_P2)/c
> + *
> + * Using (4) on (1) yields:
> + * MSNx_P1 = 128 * a + (128 * b/MSNx_P2)/c - 512
> + * MSNx_P1 + 512 + MSNx_P2/c = 128 * a + 128 * b/c
> + *
> + * a + b/c = (MSNx_P1 + MSNx_P2/MSNx_P3 + 512)/128
> + * = (MSNx_P1*MSNx_P3 + MSNx_P2 + 512*MSNx_P3)/(128*MSNx_P3)
> + *
> + */
> +static int _si5351_pll_reparent(struct si5351_driver_data *drvdata,
> + int num, enum si5351_pll_src parent)
> +{
> + u8 mask = (num == 0) ? SI5351_PLLA_SOURCE : SI5351_PLLB_SOURCE;
> +
> + if (parent == SI5351_PLL_SRC_DEFAULT)
> + return 0;
> +
> + if (num > 2)
> + return -EINVAL;
> +
> + if (drvdata->variant != SI5351_VARIANT_C &&
> + parent != SI5351_PLL_SRC_XTAL)
> + return -EINVAL;
> +
> + si5351_set_bits(drvdata, SI5351_PLL_INPUT_SOURCE, mask,
> + (parent == SI5351_PLL_SRC_XTAL) ? 0 : mask);
> + return 0;
> +}
> +
> +static unsigned char si5351_pll_get_parent(struct clk_hw *hw)
> +{
> + struct si5351_hw_data *hwdata =
> + container_of(hw, struct si5351_hw_data, hw);
> + u8 mask = (hwdata->num == 0) ? SI5351_PLLA_SOURCE : SI5351_PLLB_SOURCE;
> + u8 val;
> +
> + val = si5351_reg_read(hwdata->drvdata, SI5351_PLL_INPUT_SOURCE);
> +
> + return (val & mask) ? 1 : 0;
> +}
> +
> +static int si5351_pll_set_parent(struct clk_hw *hw, u8 index)
> +{
> + struct si5351_hw_data *hwdata =
> + container_of(hw, struct si5351_hw_data, hw);
> +
> + if (hwdata->drvdata->variant != SI5351_VARIANT_C &&
> + index > 0)
> + return -EPERM;
> +
> + if (index > 1)
> + return -EINVAL;
> +
> + return _si5351_pll_reparent(hwdata->drvdata, hwdata->num,
> + (index == 0) ? SI5351_PLL_SRC_XTAL :
> + SI5351_PLL_SRC_CLKIN);
> +}
> +
> +static unsigned long si5351_pll_recalc_rate(struct clk_hw *hw,
> + unsigned long parent_rate)
> +{
> + struct si5351_hw_data *hwdata =
> + container_of(hw, struct si5351_hw_data, hw);
> + u8 reg = (hwdata->num == 0) ? SI5351_PLLA_PARAMETERS :
> + SI5351_PLLB_PARAMETERS;
> + unsigned long long rate;
> +
> + if (!hwdata->params.valid)
> + si5351_read_parameters(hwdata->drvdata, reg, &hwdata->params);
> +
> + if (hwdata->params.p3 == 0)
> + return parent_rate;
> +
> + /* fVCO = fIN * (P1*P3 + 512*P3 + P2)/(128*P3) */
> + rate = hwdata->params.p1 * hwdata->params.p3;
> + rate += 512 * hwdata->params.p3;
> + rate += hwdata->params.p2;
> + rate *= parent_rate;
> + do_div(rate, 128 * hwdata->params.p3);
> +
> + dev_dbg(&hwdata->drvdata->client->dev,
> + "%s - %s: p1 = %lu, p2 = %lu, p3 = %lu, parent_rate = %lu, rate = %lu\n",
> + __func__, __clk_get_name(hwdata->hw.clk),
> + hwdata->params.p1, hwdata->params.p2, hwdata->params.p3,
> + parent_rate, (unsigned long)rate);
> +
> + return (unsigned long)rate;
> +}
> +
> +static long si5351_pll_round_rate(struct clk_hw *hw, unsigned long rate,
> + unsigned long *parent_rate)
> +{
> + struct si5351_hw_data *hwdata =
> + container_of(hw, struct si5351_hw_data, hw);
> + unsigned long rfrac, denom, a, b, c;
> + unsigned long long lltmp;
> +
> + if (rate < SI5351_PLL_VCO_MIN)
> + rate = SI5351_PLL_VCO_MIN;
> + if (rate > SI5351_PLL_VCO_MAX)
> + rate = SI5351_PLL_VCO_MAX;
> +
> + /* determine integer part of feedback equation */
> + a = rate / *parent_rate;
> +
> + if (a < SI5351_PLL_A_MIN)
> + rate = *parent_rate * SI5351_PLL_A_MIN;
> + if (a > SI5351_PLL_A_MAX)
> + rate = *parent_rate * SI5351_PLL_A_MAX;
> +
> + /* find best approximation for b/c = fVCO mod fIN */
> + denom = 1000 * 1000;
> + lltmp = rate % (*parent_rate);
> + lltmp *= denom;
> + do_div(lltmp, *parent_rate);
> + rfrac = (unsigned long)lltmp;
> +
> + b = 0;
> + c = 1;
> + if (rfrac)
> + rational_best_approximation(rfrac, denom,
> + SI5351_PLL_B_MAX, SI5351_PLL_C_MAX, &b, &c);
> +
> + /* calculate parameters */
> + hwdata->params.p3 = c;
> + hwdata->params.p2 = (128 * b) % c;
> + hwdata->params.p1 = 128 * a;
> + hwdata->params.p1 += (128 * b / c);
> + hwdata->params.p1 -= 512;
> +
> + /* recalculate rate by fIN * (a + b/c) */
> + lltmp = *parent_rate;
> + lltmp *= b;
> + do_div(lltmp, c);
> +
> + rate = (unsigned long)lltmp;
> + rate += *parent_rate * a;
> +
> + dev_dbg(&hwdata->drvdata->client->dev,
> + "%s - %s: a = %lu, b = %lu, c = %lu, parent_rate = %lu, rate = %lu\n",
> + __func__, __clk_get_name(hwdata->hw.clk), a, b, c,
> + *parent_rate, rate);
> +
> + return rate;
> +}
> +
> +static int si5351_pll_set_rate(struct clk_hw *hw, unsigned long rate,
> + unsigned long parent_rate)
> +{
> + struct si5351_hw_data *hwdata =
> + container_of(hw, struct si5351_hw_data, hw);
> + u8 reg = (hwdata->num == 0) ? SI5351_PLLA_PARAMETERS :
> + SI5351_PLLB_PARAMETERS;
> +
> + /* write multisynth parameters */
> + si5351_write_parameters(hwdata->drvdata, reg, &hwdata->params);
> +
> + /* plla/pllb ctrl is in clk6/clk7 ctrl registers */
> + si5351_set_bits(hwdata->drvdata, SI5351_CLK6_CTRL + hwdata->num,
> + SI5351_CLK_INTEGER_MODE,
> + (hwdata->params.p2 == 0) ? SI5351_CLK_INTEGER_MODE : 0);
> +
> + dev_dbg(&hwdata->drvdata->client->dev,
> + "%s - %s: p1 = %lu, p2 = %lu, p3 = %lu, parent_rate = %lu, rate = %lu\n",
> + __func__, __clk_get_name(hwdata->hw.clk),
> + hwdata->params.p1, hwdata->params.p2, hwdata->params.p3,
> + parent_rate, rate);
> +
> + return 0;
> +}
> +
> +static const struct clk_ops si5351_pll_ops = {
> + .set_parent = si5351_pll_set_parent,
> + .get_parent = si5351_pll_get_parent,
> + .recalc_rate = si5351_pll_recalc_rate,
> + .round_rate = si5351_pll_round_rate,
> + .set_rate = si5351_pll_set_rate,
> +};
> +
> +/*
> + * Si5351 multisync divider
> + *
> + * for fOUT <= 150 MHz:
> + *
> + * fOUT = (fIN * (a + b/c)) / CLKOUTDIV
> + *
> + * with 6 + 0/1048575 <= (a + b/c) <= 1800 + 0/1048575 and
> + * fIN = fVCO0, fVCO1
> + *
> + * Output Clock Multisynth Register Equations
> + *
> + * MSx_P1[17:0] = 128 * a + floor(128 * b/c) - 512
> + * MSx_P2[19:0] = 128 * b - c * floor(128 * b/c) = (128*b) mod c
> + * MSx_P3[19:0] = c
> + *
> + * MS[6,7] are integer (P1) divide only, P2 = 0, P3 = 0
> + *
> + * for 150MHz < fOUT <= 160MHz:
> + *
> + * MSx_P1 = 0, MSx_P2 = 0, MSx_P3 = 1, MSx_INT = 1, MSx_DIVBY4 = 11b
> + */
> +static int _si5351_msynth_reparent(struct si5351_driver_data *drvdata,
> + int num, enum si5351_multisynth_src parent)
> +{
> + if (parent == SI5351_MULTISYNTH_SRC_DEFAULT)
> + return 0;
> +
> + if (num > 8)
> + return -EINVAL;
> +
> + si5351_set_bits(drvdata, SI5351_CLK0_CTRL + num, SI5351_CLK_PLL_SELECT,
> + (parent == SI5351_MULTISYNTH_SRC_VCO0) ? 0 :
> + SI5351_CLK_PLL_SELECT);
> + return 0;
> +}
> +
> +static unsigned char si5351_msynth_get_parent(struct clk_hw *hw)
> +{
> + struct si5351_hw_data *hwdata =
> + container_of(hw, struct si5351_hw_data, hw);
> + u8 val;
> +
> + val = si5351_reg_read(hwdata->drvdata, SI5351_CLK0_CTRL + hwdata->num);
> +
> + return (val & SI5351_CLK_PLL_SELECT) ? 1 : 0;
> +}
> +
> +static int si5351_msynth_set_parent(struct clk_hw *hw, u8 index)
> +{
> + struct si5351_hw_data *hwdata =
> + container_of(hw, struct si5351_hw_data, hw);
> +
> + return _si5351_msynth_reparent(hwdata->drvdata, hwdata->num,
> + (index == 0) ? SI5351_MULTISYNTH_SRC_VCO0 :
> + SI5351_MULTISYNTH_SRC_VCO1);
> +}
> +
> +static unsigned long si5351_msynth_recalc_rate(struct clk_hw *hw,
> + unsigned long parent_rate)
> +{
> + struct si5351_hw_data *hwdata =
> + container_of(hw, struct si5351_hw_data, hw);
> + u8 reg = si5351_msynth_params_address(hwdata->num);
> + unsigned long long rate;
> + unsigned long m;
> +
> + if (!hwdata->params.valid)
> + si5351_read_parameters(hwdata->drvdata, reg, &hwdata->params);
> +
> + if (hwdata->params.p3 == 0)
> + return parent_rate;
> +
> + /*
> + * multisync0-5: fOUT = (128 * P3 * fIN) / (P1*P3 + P2 + 512*P3)
> + * multisync6-7: fOUT = fIN / P1
> + */
> + rate = parent_rate;
> + if (hwdata->num > 5) {
> + m = hwdata->params.p1;
> + } else if ((si5351_reg_read(hwdata->drvdata, reg + 2) &
> + SI5351_OUTPUT_CLK_DIVBY4) == SI5351_OUTPUT_CLK_DIVBY4) {
> + m = 4;
> + } else {
> + rate *= 128 * hwdata->params.p3;
> + m = hwdata->params.p1 * hwdata->params.p3;
> + m += hwdata->params.p2;
> + m += 512 * hwdata->params.p3;
> + }
> +
> + if (m == 0)
> + return 0;
> + do_div(rate, m);
> +
> + dev_dbg(&hwdata->drvdata->client->dev,
> + "%s - %s: p1 = %lu, p2 = %lu, p3 = %lu, m = %lu, parent_rate = %lu, rate = %lu\n",
> + __func__, __clk_get_name(hwdata->hw.clk),
> + hwdata->params.p1, hwdata->params.p2, hwdata->params.p3,
> + m, parent_rate, (unsigned long)rate);
> +
> + return (unsigned long)rate;
> +}
> +
> +static long si5351_msynth_round_rate(struct clk_hw *hw, unsigned long rate,
> + unsigned long *parent_rate)
> +{
> + struct si5351_hw_data *hwdata =
> + container_of(hw, struct si5351_hw_data, hw);
> + unsigned long long lltmp;
> + unsigned long a, b, c;
> + int divby4;
> +
> + /* multisync6-7 can only handle freqencies < 150MHz */
> + if (hwdata->num >= 6 && rate > SI5351_MULTISYNTH67_MAX_FREQ)
> + rate = SI5351_MULTISYNTH67_MAX_FREQ;
> +
> + /* multisync frequency is 1MHz .. 160MHz */
> + if (rate > SI5351_MULTISYNTH_MAX_FREQ)
> + rate = SI5351_MULTISYNTH_MAX_FREQ;
> + if (rate < SI5351_MULTISYNTH_MIN_FREQ)
> + rate = SI5351_MULTISYNTH_MIN_FREQ;
> +
> + divby4 = 0;
> + if (rate > SI5351_MULTISYNTH_DIVBY4_FREQ)
> + divby4 = 1;
> +
> + /* multisync can set pll */
> + if (__clk_get_flags(hwdata->hw.clk) & CLK_SET_RATE_PARENT) {
> + /*
> + * find largest integer divider for max
> + * vco frequency and given target rate
> + */
> + if (divby4 == 0) {
> + lltmp = SI5351_PLL_VCO_MAX;
> + do_div(lltmp, rate);
> + a = (unsigned long)lltmp;
> + } else
> + a = 4;
> +
> + b = 0;
> + c = 1;
> +
> + *parent_rate = a * rate;
> + } else {
> + unsigned long rfrac, denom;
> +
> + /* disable divby4 */
> + if (divby4) {
> + rate = SI5351_MULTISYNTH_DIVBY4_FREQ;
> + divby4 = 0;
> + }
> +
> + /* determine integer part of divider equation */
> + a = *parent_rate / rate;
> + if (a < SI5351_MULTISYNTH_A_MIN)
> + a = SI5351_MULTISYNTH_A_MIN;
> + if (hwdata->num >= 6 && a > SI5351_MULTISYNTH67_A_MAX)
> + a = SI5351_MULTISYNTH67_A_MAX;
> + else if (a > SI5351_MULTISYNTH_A_MAX)
> + a = SI5351_MULTISYNTH_A_MAX;
> +
> + /* find best approximation for b/c = fVCO mod fOUT */
> + denom = 1000 * 1000;
> + lltmp = (*parent_rate) % rate;
> + lltmp *= denom;
> + do_div(lltmp, rate);
> + rfrac = (unsigned long)lltmp;
> +
> + b = 0;
> + c = 1;
> + if (rfrac)
> + rational_best_approximation(rfrac, denom,
> + SI5351_MULTISYNTH_B_MAX, SI5351_MULTISYNTH_C_MAX,
> + &b, &c);
> + }
> +
> + /* recalculate rate by fOUT = fIN / (a + b/c) */
> + lltmp = *parent_rate;
> + lltmp *= c;
> + do_div(lltmp, a * c + b);
> + rate = (unsigned long)lltmp;
> +
> + /* calculate parameters */
> + if (divby4) {
> + hwdata->params.p3 = 1;
> + hwdata->params.p2 = 0;
> + hwdata->params.p1 = 0;
> + } else {
> + hwdata->params.p3 = c;
> + hwdata->params.p2 = (128 * b) % c;
> + hwdata->params.p1 = 128 * a;
> + hwdata->params.p1 += (128 * b / c);
> + hwdata->params.p1 -= 512;
> + }
> +
> + dev_dbg(&hwdata->drvdata->client->dev,
> + "%s - %s: a = %lu, b = %lu, c = %lu, divby4 = %d, parent_rate = %lu, rate = %lu\n",
> + __func__, __clk_get_name(hwdata->hw.clk), a, b, c, divby4,
> + *parent_rate, rate);
> +
> + return rate;
> +}
> +
> +static int si5351_msynth_set_rate(struct clk_hw *hw, unsigned long rate,
> + unsigned long parent_rate)
> +{
> + struct si5351_hw_data *hwdata =
> + container_of(hw, struct si5351_hw_data, hw);
> + u8 reg = si5351_msynth_params_address(hwdata->num);
> + int divby4 = 0;
> +
> + /* write multisynth parameters */
> + si5351_write_parameters(hwdata->drvdata, reg, &hwdata->params);
> +
> + if (rate > SI5351_MULTISYNTH_DIVBY4_FREQ)
> + divby4 = 1;
> +
> + /* enable/disable integer mode and divby4 on multisynth0-5 */
> + if (hwdata->num < 6) {
> + si5351_set_bits(hwdata->drvdata, reg + 2,
> + SI5351_OUTPUT_CLK_DIVBY4,
> + (divby4) ? SI5351_OUTPUT_CLK_DIVBY4 : 0);
> + si5351_set_bits(hwdata->drvdata, SI5351_CLK0_CTRL + hwdata->num,
> + SI5351_CLK_INTEGER_MODE,
> + (hwdata->params.p2 == 0) ? SI5351_CLK_INTEGER_MODE : 0);
> + }
> +
> + dev_dbg(&hwdata->drvdata->client->dev,
> + "%s - %s: p1 = %lu, p2 = %lu, p3 = %lu, divby4 = %d, parent_rate = %lu, rate = %lu\n",
> + __func__, __clk_get_name(hwdata->hw.clk),
> + hwdata->params.p1, hwdata->params.p2, hwdata->params.p3,
> + divby4, parent_rate, rate);
> +
> + return 0;
> +}
> +
> +static const struct clk_ops si5351_msynth_ops = {
> + .set_parent = si5351_msynth_set_parent,
> + .get_parent = si5351_msynth_get_parent,
> + .recalc_rate = si5351_msynth_recalc_rate,
> + .round_rate = si5351_msynth_round_rate,
> + .set_rate = si5351_msynth_set_rate,
> +};
> +
> +/*
> + * Si5351 clkout divider
> + */
> +static int _si5351_clkout_reparent(struct si5351_driver_data *drvdata,
> + int num, enum si5351_clkout_src parent)
> +{
> + u8 val;
> +
> + if (num > 8)
> + return -EINVAL;
> +
> + switch (parent) {
> + case SI5351_CLKOUT_SRC_MSYNTH_N:
> + val = SI5351_CLK_INPUT_MULTISYNTH_N;
> + break;
> + case SI5351_CLKOUT_SRC_MSYNTH_0_4:
> + /* clk0/clk4 can only connect to its own multisync */
> + if (num == 0 || num == 4)
> + val = SI5351_CLK_INPUT_MULTISYNTH_N;
> + else
> + val = SI5351_CLK_INPUT_MULTISYNTH_0_4;
> + break;
> + case SI5351_CLKOUT_SRC_XTAL:
> + val = SI5351_CLK_INPUT_XTAL;
> + break;
> + case SI5351_CLKOUT_SRC_CLKIN:
> + if (drvdata->variant != SI5351_VARIANT_C)
> + return -EINVAL;
> +
> + val = SI5351_CLK_INPUT_CLKIN;
> + break;
> + default:
> + return 0;
> + }
> +
> + si5351_set_bits(drvdata, SI5351_CLK0_CTRL + num,
> + SI5351_CLK_INPUT_MASK, val);
> + return 0;
> +}
> +
> +static int _si5351_clkout_set_drive_strength(
> + struct si5351_driver_data *drvdata, int num,
> + enum si5351_drive_strength drive)
> +{
> + u8 mask;
> +
> + if (num > 8)
> + return -EINVAL;
> +
> + switch (drive) {
> + case SI5351_DRIVE_2MA:
> + mask = SI5351_CLK_DRIVE_STRENGTH_2MA;
> + break;
> + case SI5351_DRIVE_4MA:
> + mask = SI5351_CLK_DRIVE_STRENGTH_4MA;
> + break;
> + case SI5351_DRIVE_6MA:
> + mask = SI5351_CLK_DRIVE_STRENGTH_6MA;
> + break;
> + case SI5351_DRIVE_8MA:
> + mask = SI5351_CLK_DRIVE_STRENGTH_8MA;
> + break;
> + default:
> + return 0;
> + }
> +
> + si5351_set_bits(drvdata, SI5351_CLK0_CTRL + num,
> + SI5351_CLK_DRIVE_STRENGTH_MASK, mask);
> + return 0;
> +}
> +
> +static int si5351_clkout_prepare(struct clk_hw *hw)
> +{
> + struct si5351_hw_data *hwdata =
> + container_of(hw, struct si5351_hw_data, hw);
> +
> + si5351_set_bits(hwdata->drvdata, SI5351_CLK0_CTRL + hwdata->num,
> + SI5351_CLK_POWERDOWN, 0);
> + si5351_set_bits(hwdata->drvdata, SI5351_OUTPUT_ENABLE_CTRL,
> + (1 << hwdata->num), 0);
> + return 0;
> +}
> +
> +static void si5351_clkout_unprepare(struct clk_hw *hw)
> +{
> + struct si5351_hw_data *hwdata =
> + container_of(hw, struct si5351_hw_data, hw);
> +
> + si5351_set_bits(hwdata->drvdata, SI5351_CLK0_CTRL + hwdata->num,
> + SI5351_CLK_POWERDOWN, SI5351_CLK_POWERDOWN);
> + si5351_set_bits(hwdata->drvdata, SI5351_OUTPUT_ENABLE_CTRL,
> + (1 << hwdata->num), (1 << hwdata->num));
> +}
> +
> +static u8 si5351_clkout_get_parent(struct clk_hw *hw)
> +{
> + struct si5351_hw_data *hwdata =
> + container_of(hw, struct si5351_hw_data, hw);
> + int index = 0;
> + unsigned char val;
> +
> + val = si5351_reg_read(hwdata->drvdata, SI5351_CLK0_CTRL + hwdata->num);
> + switch (val & SI5351_CLK_INPUT_MASK) {
> + case SI5351_CLK_INPUT_MULTISYNTH_N:
> + index = 0;
> + break;
> + case SI5351_CLK_INPUT_MULTISYNTH_0_4:
> + index = 1;
> + break;
> + case SI5351_CLK_INPUT_XTAL:
> + index = 2;
> + break;
> + case SI5351_CLK_INPUT_CLKIN:
> + index = 3;
> + break;
> + }
> +
> + return index;
> +}
> +
> +static int si5351_clkout_set_parent(struct clk_hw *hw, u8 index)
> +{
> + struct si5351_hw_data *hwdata =
> + container_of(hw, struct si5351_hw_data, hw);
> + enum si5351_clkout_src parent = SI5351_CLKOUT_SRC_DEFAULT;
> +
> + switch (index) {
> + case 0:
> + parent = SI5351_CLKOUT_SRC_MSYNTH_N;
> + break;
> + case 1:
> + parent = SI5351_CLKOUT_SRC_MSYNTH_0_4;
> + break;
> + case 2:
> + parent = SI5351_CLKOUT_SRC_XTAL;
> + break;
> + case 3:
> + parent = SI5351_CLKOUT_SRC_CLKIN;
> + break;
> + }
> +
> + return _si5351_clkout_reparent(hwdata->drvdata, hwdata->num, parent);
> +}
> +
> +static unsigned long si5351_clkout_recalc_rate(struct clk_hw *hw,
> + unsigned long parent_rate)
> +{
> + struct si5351_hw_data *hwdata =
> + container_of(hw, struct si5351_hw_data, hw);
> + unsigned char reg;
> + unsigned char rdiv;
> +
> + if (hwdata->num > 5)
> + reg = si5351_msynth_params_address(hwdata->num) + 2;
> + else
> + reg = SI5351_CLK6_7_OUTPUT_DIVIDER;
> +
> + rdiv = si5351_reg_read(hwdata->drvdata, reg);
> + if (hwdata->num == 6) {
> + rdiv &= SI5351_OUTPUT_CLK6_DIV_MASK;
> + } else {
> + rdiv &= SI5351_OUTPUT_CLK_DIV_MASK;
> + rdiv >>= SI5351_OUTPUT_CLK_DIV_SHIFT;
> + }
> +
> + return parent_rate >> rdiv;
> +}
> +
> +static long si5351_clkout_round_rate(struct clk_hw *hw, unsigned long rate,
> + unsigned long *parent_rate)
> +{
> + struct si5351_hw_data *hwdata =
> + container_of(hw, struct si5351_hw_data, hw);
> + unsigned char rdiv;
> +
> + /* clkout6/7 can only handle output freqencies < 150MHz */
> + if (hwdata->num >= 6 && rate > SI5351_CLKOUT67_MAX_FREQ)
> + rate = SI5351_CLKOUT67_MAX_FREQ;
> +
> + /* clkout freqency is 8kHz - 160MHz */
> + if (rate > SI5351_CLKOUT_MAX_FREQ)
> + rate = SI5351_CLKOUT_MAX_FREQ;
> + if (rate < SI5351_CLKOUT_MIN_FREQ)
> + rate = SI5351_CLKOUT_MIN_FREQ;
> +
> + /* request frequency if multisync master */
> + if (__clk_get_flags(hwdata->hw.clk) & CLK_SET_RATE_PARENT) {
> + /* use r divider for frequencies below 1MHz */
> + rdiv = SI5351_OUTPUT_CLK_DIV_1;
> + while (rate < SI5351_MULTISYNTH_MIN_FREQ &&
> + rdiv < SI5351_OUTPUT_CLK_DIV_128) {
> + rdiv += 1;
> + rate *= 2;
> + }
> + *parent_rate = rate;
> + } else {
> + unsigned long new_rate, new_err, err;
> +
> + /* round to closed rdiv */
> + rdiv = SI5351_OUTPUT_CLK_DIV_1;
> + new_rate = *parent_rate;
> + err = abs(new_rate - rate);
> + do {
> + new_rate >>= 1;
> + new_err = abs(new_rate - rate);
> + if (new_err > err || rdiv == SI5351_OUTPUT_CLK_DIV_128)
> + break;
> + rdiv++;
> + err = new_err;
> + } while (1);
> + }
> + rate = *parent_rate >> rdiv;
> +
> + dev_dbg(&hwdata->drvdata->client->dev,
> + "%s - %s: rdiv = %u, parent_rate = %lu, rate = %lu\n",
> + __func__, __clk_get_name(hwdata->hw.clk), (1 << rdiv),
> + *parent_rate, rate);
> +
> + return rate;
> +}
> +
> +static int si5351_clkout_set_rate(struct clk_hw *hw, unsigned long rate,
> + unsigned long parent_rate)
> +{
> + struct si5351_hw_data *hwdata =
> + container_of(hw, struct si5351_hw_data, hw);
> + unsigned long new_rate, new_err, err;
> + unsigned char rdiv;
> +
> + /* round to closed rdiv */
> + rdiv = SI5351_OUTPUT_CLK_DIV_1;
> + new_rate = parent_rate;
> + err = abs(new_rate - rate);
> + do {
> + new_rate >>= 1;
> + new_err = abs(new_rate - rate);
> + if (new_err > err || rdiv == SI5351_OUTPUT_CLK_DIV_128)
> + break;
> + rdiv++;
> + err = new_err;
> + } while (1);
> +
> + /* write output divider */
> + switch (hwdata->num) {
> + case 6:
> + si5351_set_bits(hwdata->drvdata, SI5351_CLK6_7_OUTPUT_DIVIDER,
> + SI5351_OUTPUT_CLK6_DIV_MASK, rdiv);
> + break;
> + case 7:
> + si5351_set_bits(hwdata->drvdata, SI5351_CLK6_7_OUTPUT_DIVIDER,
> + SI5351_OUTPUT_CLK_DIV_MASK,
> + rdiv << SI5351_OUTPUT_CLK_DIV_SHIFT);
> + break;
> + default:
> + si5351_set_bits(hwdata->drvdata,
> + si5351_msynth_params_address(hwdata->num) + 2,
> + SI5351_OUTPUT_CLK_DIV_MASK,
> + rdiv << SI5351_OUTPUT_CLK_DIV_SHIFT);
> + }
> +
> + dev_dbg(&hwdata->drvdata->client->dev,
> + "%s - %s: rdiv = %u, parent_rate = %lu, rate = %lu\n",
> + __func__, __clk_get_name(hwdata->hw.clk), (1 << rdiv),
> + parent_rate, rate);
> +
> + return 0;
> +}
> +
> +static const struct clk_ops si5351_clkout_ops = {
> + .prepare = si5351_clkout_prepare,
> + .unprepare = si5351_clkout_unprepare,
> + .set_parent = si5351_clkout_set_parent,
> + .get_parent = si5351_clkout_get_parent,
> + .recalc_rate = si5351_clkout_recalc_rate,
> + .round_rate = si5351_clkout_round_rate,
> + .set_rate = si5351_clkout_set_rate,
> +};
> +
> +/*
> + * Si5351 i2c probe and DT
> + */
> +#ifdef CONFIG_OF
> +static const struct of_device_id si5351_dt_ids[] = {
> + { .compatible = "silabs,si5351a", .data = (void *)SI5351_VARIANT_A, },
> + { .compatible = "silabs,si5351a-msop",
> + .data = (void *)SI5351_VARIANT_A3, },
> + { .compatible = "silabs,si5351b", .data = (void *)SI5351_VARIANT_B, },
> + { .compatible = "silabs,si5351c", .data = (void *)SI5351_VARIANT_C, },
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, si5351_dt_ids);
> +
> +static int si5351_dt_parse(struct i2c_client *client)
> +{
> + struct device_node *child, *np = client->dev.of_node;
> + struct si5351_platform_data *pdata;
> + const struct of_device_id *match;
> + struct property *prop;
> + const __be32 *p;
> + int num = 0;
> + u32 val;
> +
> + if (np == NULL)
> + return 0;
> +
> + match = of_match_node(si5351_dt_ids, np);
> + if (match == NULL)
> + return -EINVAL;
> +
> + pdata = devm_kzalloc(&client->dev, sizeof(*pdata), GFP_KERNEL);
> + if (!pdata)
> + return -ENOMEM;
> +
> + pdata->variant = (enum si5351_variant)match->data;
> + pdata->clk_xtal = of_clk_get(np, 0);
> + if (!IS_ERR(pdata->clk_xtal))
> + clk_put(pdata->clk_xtal);
> + pdata->clk_clkin = of_clk_get(np, 1);
> + if (!IS_ERR(pdata->clk_clkin))
> + clk_put(pdata->clk_clkin);
> +
> + /*
> + * property silabs,pll-source : <num src>, [<..>]
> + * allow to selectively set pll source
> + */
> + of_property_for_each_u32(np, "silabs,pll-source", prop, p, num) {
> + if (num >= 2) {
> + dev_err(&client->dev,
> + "invalid pll %d on pll-source prop\n", num);
> + return -EINVAL;
> + }
> +
> + p = of_prop_next_u32(prop, p, &val);
> + if (!p) {
> + dev_err(&client->dev,
> + "missing pll-source for pll %d\n", num);
> + return -EINVAL;
> + }
> +
> + switch (val) {
> + case 0:
> + pdata->pll_src[num] = SI5351_PLL_SRC_XTAL;
> + break;
> + case 1:
> + if (pdata->variant != SI5351_VARIANT_C) {
> + dev_err(&client->dev,
> + "invalid parent %d for pll %d\n",
> + val, num);
> + return -EINVAL;
> + }
> + pdata->pll_src[num] = SI5351_PLL_SRC_CLKIN;
> + break;
> + default:
> + dev_err(&client->dev,
> + "invalid parent %d for pll %d\n", val, num);
> + return -EINVAL;
> + }
> + }
> +
> + /* per clkout properties */
> + for_each_child_of_node(np, child) {
> + if (of_property_read_u32(child, "reg", &num)) {
> + dev_err(&client->dev, "missing reg property of %s\n",
> + child->name);
> + return -EINVAL;
> + }
> +
> + if (num >= 8 ||
> + (pdata->variant == SI5351_VARIANT_A3 && num >= 3)) {
> + dev_err(&client->dev, "invalid clkout %d\n", num);
> + return -EINVAL;
> + }
> +
> + if (!of_property_read_u32(child, "silabs,multisynth-source",
> + &val)) {
> + switch (val) {
> + case 0:
> + pdata->clkout[num].multisynth_src =
> + SI5351_MULTISYNTH_SRC_VCO0;
> + break;
> + case 1:
> + pdata->clkout[num].multisynth_src =
> + SI5351_MULTISYNTH_SRC_VCO1;
> + break;
> + default:
> + dev_err(&client->dev,
> + "invalid parent %d for multisynth %d\n",
> + val, num);
> + return -EINVAL;
> + }
> + }
> +
> + if (!of_property_read_u32(child, "silabs,clock-source", &val)) {
> + switch (val) {
> + case 0:
> + pdata->clkout[num].clkout_src =
> + SI5351_CLKOUT_SRC_MSYNTH_N;
> + break;
> + case 1:
> + pdata->clkout[num].clkout_src =
> + SI5351_CLKOUT_SRC_MSYNTH_0_4;
> + break;
> + case 2:
> + pdata->clkout[num].clkout_src =
> + SI5351_CLKOUT_SRC_XTAL;
> + break;
> + case 3:
> + if (pdata->variant != SI5351_VARIANT_C) {
> + dev_err(&client->dev,
> + "invalid parent %d for clkout %d\n",
> + val, num);
> + return -EINVAL;
> + }
> + pdata->clkout[num].clkout_src =
> + SI5351_CLKOUT_SRC_CLKIN;
> + break;
> + default:
> + dev_err(&client->dev,
> + "invalid parent %d for clkout %d\n",
> + val, num);
> + return -EINVAL;
> + }
> + }
> +
> + if (!of_property_read_u32(child, "silabs,drive-strength",
> + &val)) {
> + switch (val) {
> + case SI5351_DRIVE_2MA:
> + case SI5351_DRIVE_4MA:
> + case SI5351_DRIVE_6MA:
> + case SI5351_DRIVE_8MA:
> + pdata->clkout[num].drive = val;
> + break;
> + default:
> + dev_err(&client->dev,
> + "invalid drive strength %d for clkout %d\n",
> + val, num);
> + return -EINVAL;
> + }
> + }
> +
> + if (!of_property_read_u32(child, "clock-frequency", &val))
> + pdata->clkout[num].rate = val;
> +
> + pdata->clkout[num].pll_master =
> + of_property_read_bool(child, "silabs,pll-master");
> + }
> + client->dev.platform_data = pdata;
> +
> + return 0;
> +}
> +#else
> +static int si5351_dt_parse(struct i2c_client *client)
> +{
> + return 0;
> +}
> +#endif /* CONFIG_OF */
> +
> +static int si5351_i2c_probe(struct i2c_client *client,
> + const struct i2c_device_id *id)
> +{
> + struct si5351_platform_data *pdata;
> + struct si5351_driver_data *drvdata;
> + struct clk_init_data init;
> + struct clk *clk;
> + const char *parent_names[4];
> + u8 num_parents, num_clocks;
> + int ret, n;
> +
> + ret = si5351_dt_parse(client);
> + if (ret)
> + return ret;
> +
> + pdata = client->dev.platform_data;
> + if (!pdata)
> + return -EINVAL;
> +
> + drvdata = devm_kzalloc(&client->dev, sizeof(*drvdata), GFP_KERNEL);
> + if (drvdata == NULL) {
> + dev_err(&client->dev, "unable to allocate driver data\n");
> + return -ENOMEM;
> + }
> +
> + i2c_set_clientdata(client, drvdata);
> + drvdata->client = client;
> + drvdata->variant = pdata->variant;
> + drvdata->pxtal = pdata->clk_xtal;
> + drvdata->pclkin = pdata->clk_clkin;
> +
> + drvdata->regmap = devm_regmap_init_i2c(client, &si5351_regmap_config);
> + if (IS_ERR(drvdata->regmap)) {
> + dev_err(&client->dev, "failed to allocate register map\n");
> + return PTR_ERR(drvdata->regmap);
> + }
> +
> + /* Disable interrupts */
> + si5351_reg_write(drvdata, SI5351_INTERRUPT_MASK, 0xf0);
> + /* Set disabled output drivers to drive low */
> + si5351_reg_write(drvdata, SI5351_CLK3_0_DISABLE_STATE, 0x00);
> + si5351_reg_write(drvdata, SI5351_CLK7_4_DISABLE_STATE, 0x00);
> + /* Ensure pll select is on XTAL for Si5351A/B */
> + if (drvdata->variant != SI5351_VARIANT_C)
> + si5351_set_bits(drvdata, SI5351_PLL_INPUT_SOURCE,
> + SI5351_PLLA_SOURCE | SI5351_PLLB_SOURCE, 0);
> +
> + /* setup clock configuration */
> + for (n = 0; n < 2; n++) {
> + ret = _si5351_pll_reparent(drvdata, n, pdata->pll_src[n]);
> + if (ret) {
> + dev_err(&client->dev,
> + "failed to reparent pll %d to %d\n",
> + n, pdata->pll_src[n]);
> + return ret;
> + }
> + }
> +
> + for (n = 0; n < 8; n++) {
> + ret = _si5351_msynth_reparent(drvdata, n,
> + pdata->clkout[n].multisynth_src);
> + if (ret) {
> + dev_err(&client->dev,
> + "failed to reparent multisynth %d to %d\n",
> + n, pdata->clkout[n].multisynth_src);
> + return ret;
> + }
> +
> + ret = _si5351_clkout_reparent(drvdata, n,
> + pdata->clkout[n].clkout_src);
> + if (ret) {
> + dev_err(&client->dev,
> + "failed to reparent clkout %d to %d\n",
> + n, pdata->clkout[n].clkout_src);
> + return ret;
> + }
> +
> + ret = _si5351_clkout_set_drive_strength(drvdata, n,
> + pdata->clkout[n].drive);
> + if (ret) {
> + dev_err(&client->dev,
> + "failed set drive strength of clkout%d to %d\n",
> + n, pdata->clkout[n].drive);
> + return ret;
> + }
> + }
> +
> + /* register xtal input clock gate */
> + memset(&init, 0, sizeof(init));
> + init.name = si5351_input_names[0];
> + init.ops = &si5351_xtal_ops;
> + init.flags = 0;
> + if (!IS_ERR(drvdata->pxtal)) {
> + drvdata->pxtal_name = __clk_get_name(drvdata->pxtal);
> + init.parent_names = &drvdata->pxtal_name;
> + init.num_parents = 1;
> + }
> + drvdata->xtal.init = &init;
> + clk = devm_clk_register(&client->dev, &drvdata->xtal);
> + if (IS_ERR(clk)) {
> + dev_err(&client->dev, "unable to register %s\n", init.name);
> + return PTR_ERR(clk);
> + }
> +
> + /* register clkin input clock gate */
> + if (drvdata->variant == SI5351_VARIANT_C) {
> + memset(&init, 0, sizeof(init));
> + init.name = si5351_input_names[1];
> + init.ops = &si5351_clkin_ops;
> + if (!IS_ERR(drvdata->pclkin)) {
> + drvdata->pclkin_name = __clk_get_name(drvdata->pclkin);
> + init.parent_names = &drvdata->pclkin_name;
> + init.num_parents = 1;
> + }
> + drvdata->clkin.init = &init;
> + clk = devm_clk_register(&client->dev, &drvdata->clkin);
> + if (IS_ERR(clk)) {
> + dev_err(&client->dev, "unable to register %s\n",
> + init.name);
> + return PTR_ERR(clk);
> + }
> + }
> +
> + /* Si5351C allows to mux either xtal or clkin to PLL input */
> + num_parents = (drvdata->variant == SI5351_VARIANT_C) ? 2 : 1;
> + parent_names[0] = si5351_input_names[0];
> + parent_names[1] = si5351_input_names[1];
> +
> + /* register PLLA */
> + drvdata->pll[0].num = 0;
> + drvdata->pll[0].drvdata = drvdata;
> + drvdata->pll[0].hw.init = &init;
> + memset(&init, 0, sizeof(init));
> + init.name = si5351_pll_names[0];
> + init.ops = &si5351_pll_ops;
> + init.flags = 0;
> + init.parent_names = parent_names;
> + init.num_parents = num_parents;
> + clk = devm_clk_register(&client->dev, &drvdata->pll[0].hw);
> + if (IS_ERR(clk)) {
> + dev_err(&client->dev, "unable to register %s\n", init.name);
> + return -EINVAL;
> + }
> +
> + /* register PLLB or VXCO (Si5351B) */
> + drvdata->pll[1].num = 1;
> + drvdata->pll[1].drvdata = drvdata;
> + drvdata->pll[1].hw.init = &init;
> + memset(&init, 0, sizeof(init));
> + if (drvdata->variant == SI5351_VARIANT_B) {
> + init.name = si5351_pll_names[2];
> + init.ops = &si5351_vxco_ops;
> + init.flags = CLK_IS_ROOT;
> + init.parent_names = NULL;
> + init.num_parents = 0;
> + } else {
> + init.name = si5351_pll_names[1];
> + init.ops = &si5351_pll_ops;
> + init.flags = 0;
> + init.parent_names = parent_names;
> + init.num_parents = num_parents;
> + }
> + clk = devm_clk_register(&client->dev, &drvdata->pll[1].hw);
> + if (IS_ERR(clk)) {
> + dev_err(&client->dev, "unable to register %s\n", init.name);
> + return -EINVAL;
> + }
> +
> + /* register clk multisync and clk out divider */
> + num_clocks = (drvdata->variant == SI5351_VARIANT_A3) ? 3 : 8;
> + parent_names[0] = si5351_pll_names[0];
> + if (drvdata->variant == SI5351_VARIANT_B)
> + parent_names[1] = si5351_pll_names[2];
> + else
> + parent_names[1] = si5351_pll_names[1];
> +
> + drvdata->msynth = devm_kzalloc(&client->dev, num_clocks *
> + sizeof(*drvdata->msynth), GFP_KERNEL);
> + drvdata->clkout = devm_kzalloc(&client->dev, num_clocks *
> + sizeof(*drvdata->clkout), GFP_KERNEL);
> +
> + drvdata->onecell.clk_num = num_clocks;
> + drvdata->onecell.clks = devm_kzalloc(&client->dev,
> + num_clocks * sizeof(*drvdata->onecell.clks), GFP_KERNEL);
> +
> + if (WARN_ON(!drvdata->msynth || !drvdata->clkout ||
> + !drvdata->onecell.clks))
> + return -ENOMEM;
> +
> + for (n = 0; n < num_clocks; n++) {
> + drvdata->msynth[n].num = n;
> + drvdata->msynth[n].drvdata = drvdata;
> + drvdata->msynth[n].hw.init = &init;
> + memset(&init, 0, sizeof(init));
> + init.name = si5351_msynth_names[n];
> + init.ops = &si5351_msynth_ops;
> + init.flags = 0;
> + if (pdata->clkout[n].pll_master)
> + init.flags |= CLK_SET_RATE_PARENT;
> + init.parent_names = parent_names;
> + init.num_parents = 2;
> + clk = devm_clk_register(&client->dev, &drvdata->msynth[n].hw);
> + if (IS_ERR(clk)) {
> + dev_err(&client->dev, "unable to register %s\n",
> + init.name);
> + return -EINVAL;
> + }
> + }
> +
> + num_parents = (drvdata->variant == SI5351_VARIANT_C) ? 4 : 3;
> + parent_names[2] = si5351_input_names[0];
> + parent_names[3] = si5351_input_names[1];
> + for (n = 0; n < num_clocks; n++) {
> + parent_names[0] = si5351_msynth_names[n];
> + parent_names[1] = (n < 4) ? si5351_msynth_names[0] :
> + si5351_msynth_names[4];
> +
> + drvdata->clkout[n].num = n;
> + drvdata->clkout[n].drvdata = drvdata;
> + drvdata->clkout[n].hw.init = &init;
> + memset(&init, 0, sizeof(init));
> + init.name = si5351_clkout_names[n];
> + init.ops = &si5351_clkout_ops;
> + init.flags = 0;
> + if (pdata->clkout[n].clkout_src == SI5351_CLKOUT_SRC_MSYNTH_N)
> + init.flags |= CLK_SET_RATE_PARENT;
> + init.parent_names = parent_names;
> + init.num_parents = num_parents;
> + clk = devm_clk_register(&client->dev, &drvdata->clkout[n].hw);
> + if (IS_ERR(clk)) {
> + dev_err(&client->dev, "unable to register %s\n",
> + init.name);
> + return -EINVAL;
> + }
> + drvdata->onecell.clks[n] = clk;
> + }
> +
> + ret = of_clk_add_provider(client->dev.of_node, of_clk_src_onecell_get,
> + &drvdata->onecell);
> + if (ret) {
> + dev_err(&client->dev, "unable to add clk provider\n");
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static const struct i2c_device_id si5351_i2c_ids[] = {
> + { "silabs,si5351", 0 },
> + { }
> +};
> +MODULE_DEVICE_TABLE(i2c, si5351_i2c_ids);
> +
> +static struct i2c_driver si5351_driver = {
> + .driver = {
> + .name = "si5351",
> + .of_match_table = of_match_ptr(si5351_dt_ids),
> + },
> + .probe = si5351_i2c_probe,
> + .id_table = si5351_i2c_ids,
> +};
> +module_i2c_driver(si5351_driver);
> +
> +MODULE_AUTHOR("Sebastian Hesselbarth <sebastian.hesselbarth@...il.com");
> +MODULE_DESCRIPTION("Silicon Labs Si5351A/B/C clock generator driver");
> +MODULE_LICENSE("GPL");
> diff --git a/drivers/clk/clk-si5351.h b/drivers/clk/clk-si5351.h
> new file mode 100644
> index 0000000..af41b50
> --- /dev/null
> +++ b/drivers/clk/clk-si5351.h
> @@ -0,0 +1,155 @@
> +/*
> + * clk-si5351.h: Silicon Laboratories Si5351A/B/C I2C Clock Generator
> + *
> + * Sebastian Hesselbarth <sebastian.hesselbarth@...il.com>
> + * Rabeeh Khoury <rabeeh@...id-run.com>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License as published by the
> + * Free Software Foundation; either version 2 of the License, or (at your
> + * option) any later version.
> + */
> +
> +#ifndef _CLK_SI5351_H_
> +#define _CLK_SI5351_H_
> +
> +#define SI5351_BUS_BASE_ADDR 0x60
> +
> +#define SI5351_PLL_VCO_MIN 600000000
> +#define SI5351_PLL_VCO_MAX 900000000
> +#define SI5351_MULTISYNTH_MIN_FREQ 1000000
> +#define SI5351_MULTISYNTH_DIVBY4_FREQ 150000000
> +#define SI5351_MULTISYNTH_MAX_FREQ 160000000
> +#define SI5351_MULTISYNTH67_MAX_FREQ SI5351_MULTISYNTH_DIVBY4_FREQ
> +#define SI5351_CLKOUT_MIN_FREQ 8000
> +#define SI5351_CLKOUT_MAX_FREQ SI5351_MULTISYNTH_MAX_FREQ
> +#define SI5351_CLKOUT67_MAX_FREQ SI5351_MULTISYNTH67_MAX_FREQ
> +
> +#define SI5351_PLL_A_MIN 15
> +#define SI5351_PLL_A_MAX 90
> +#define SI5351_PLL_B_MAX (SI5351_PLL_C_MAX-1)
> +#define SI5351_PLL_C_MAX 1048575
> +#define SI5351_MULTISYNTH_A_MIN 6
> +#define SI5351_MULTISYNTH_A_MAX 1800
> +#define SI5351_MULTISYNTH67_A_MAX 254
> +#define SI5351_MULTISYNTH_B_MAX (SI5351_MULTISYNTH_C_MAX-1)
> +#define SI5351_MULTISYNTH_C_MAX 1048575
> +#define SI5351_MULTISYNTH_P1_MAX ((1<<18)-1)
> +#define SI5351_MULTISYNTH_P2_MAX ((1<<20)-1)
> +#define SI5351_MULTISYNTH_P3_MAX ((1<<20)-1)
> +
> +#define SI5351_DEVICE_STATUS 0
> +#define SI5351_INTERRUPT_STATUS 1
> +#define SI5351_INTERRUPT_MASK 2
> +#define SI5351_STATUS_SYS_INIT (1<<7)
> +#define SI5351_STATUS_LOL_B (1<<6)
> +#define SI5351_STATUS_LOL_A (1<<5)
> +#define SI5351_STATUS_LOS (1<<4)
> +#define SI5351_OUTPUT_ENABLE_CTRL 3
> +#define SI5351_OEB_PIN_ENABLE_CTRL 9
> +#define SI5351_PLL_INPUT_SOURCE 15
> +#define SI5351_CLKIN_DIV_MASK (3<<6)
> +#define SI5351_CLKIN_DIV_1 (0<<6)
> +#define SI5351_CLKIN_DIV_2 (1<<6)
> +#define SI5351_CLKIN_DIV_4 (2<<6)
> +#define SI5351_CLKIN_DIV_8 (3<<6)
> +#define SI5351_PLLB_SOURCE (1<<3)
> +#define SI5351_PLLA_SOURCE (1<<2)
> +
> +#define SI5351_CLK0_CTRL 16
> +#define SI5351_CLK1_CTRL 17
> +#define SI5351_CLK2_CTRL 18
> +#define SI5351_CLK3_CTRL 19
> +#define SI5351_CLK4_CTRL 20
> +#define SI5351_CLK5_CTRL 21
> +#define SI5351_CLK6_CTRL 22
> +#define SI5351_CLK7_CTRL 23
> +#define SI5351_CLK_POWERDOWN (1<<7)
> +#define SI5351_CLK_INTEGER_MODE (1<<6)
> +#define SI5351_CLK_PLL_SELECT (1<<5)
> +#define SI5351_CLK_INVERT (1<<4)
> +#define SI5351_CLK_INPUT_MASK (3<<2)
> +#define SI5351_CLK_INPUT_XTAL (0<<2)
> +#define SI5351_CLK_INPUT_CLKIN (1<<2)
> +#define SI5351_CLK_INPUT_MULTISYNTH_0_4 (2<<2)
> +#define SI5351_CLK_INPUT_MULTISYNTH_N (3<<2)
> +#define SI5351_CLK_DRIVE_STRENGTH_MASK (3<<0)
> +#define SI5351_CLK_DRIVE_STRENGTH_2MA (0<<0)
> +#define SI5351_CLK_DRIVE_STRENGTH_4MA (1<<0)
> +#define SI5351_CLK_DRIVE_STRENGTH_6MA (2<<0)
> +#define SI5351_CLK_DRIVE_STRENGTH_8MA (3<<0)
> +
> +#define SI5351_CLK3_0_DISABLE_STATE 24
> +#define SI5351_CLK7_4_DISABLE_STATE 25
> +#define SI5351_CLK_DISABLE_STATE_LOW 0
> +#define SI5351_CLK_DISABLE_STATE_HIGH 1
> +#define SI5351_CLK_DISABLE_STATE_FLOAT 2
> +#define SI5351_CLK_DISABLE_STATE_NEVER 3
> +
> +#define SI5351_PARAMETERS_LENGTH 8
> +#define SI5351_PLLA_PARAMETERS 26
> +#define SI5351_PLLB_PARAMETERS 34
> +#define SI5351_CLK0_PARAMETERS 42
> +#define SI5351_CLK1_PARAMETERS 50
> +#define SI5351_CLK2_PARAMETERS 58
> +#define SI5351_CLK3_PARAMETERS 66
> +#define SI5351_CLK4_PARAMETERS 74
> +#define SI5351_CLK5_PARAMETERS 82
> +#define SI5351_CLK6_PARAMETERS 90
> +#define SI5351_CLK7_PARAMETERS 91
> +#define SI5351_CLK6_7_OUTPUT_DIVIDER 92
> +#define SI5351_OUTPUT_CLK_DIV_MASK (7 << 4)
> +#define SI5351_OUTPUT_CLK6_DIV_MASK (7 << 0)
> +#define SI5351_OUTPUT_CLK_DIV_SHIFT 4
> +#define SI5351_OUTPUT_CLK_DIV6_SHIFT 0
> +#define SI5351_OUTPUT_CLK_DIV_1 0
> +#define SI5351_OUTPUT_CLK_DIV_2 1
> +#define SI5351_OUTPUT_CLK_DIV_4 2
> +#define SI5351_OUTPUT_CLK_DIV_8 3
> +#define SI5351_OUTPUT_CLK_DIV_16 4
> +#define SI5351_OUTPUT_CLK_DIV_32 5
> +#define SI5351_OUTPUT_CLK_DIV_64 6
> +#define SI5351_OUTPUT_CLK_DIV_128 7
> +#define SI5351_OUTPUT_CLK_DIVBY4 (3<<2)
> +
> +#define SI5351_SSC_PARAM0 149
> +#define SI5351_SSC_PARAM1 150
> +#define SI5351_SSC_PARAM2 151
> +#define SI5351_SSC_PARAM3 152
> +#define SI5351_SSC_PARAM4 153
> +#define SI5351_SSC_PARAM5 154
> +#define SI5351_SSC_PARAM6 155
> +#define SI5351_SSC_PARAM7 156
> +#define SI5351_SSC_PARAM8 157
> +#define SI5351_SSC_PARAM9 158
> +#define SI5351_SSC_PARAM10 159
> +#define SI5351_SSC_PARAM11 160
> +#define SI5351_SSC_PARAM12 161
> +
> +#define SI5351_VXCO_PARAMETERS_LOW 162
> +#define SI5351_VXCO_PARAMETERS_MID 163
> +#define SI5351_VXCO_PARAMETERS_HIGH 164
> +
> +#define SI5351_CLK0_PHASE_OFFSET 165
> +#define SI5351_CLK1_PHASE_OFFSET 166
> +#define SI5351_CLK2_PHASE_OFFSET 167
> +#define SI5351_CLK3_PHASE_OFFSET 168
> +#define SI5351_CLK4_PHASE_OFFSET 169
> +#define SI5351_CLK5_PHASE_OFFSET 170
> +
> +#define SI5351_PLL_RESET 177
> +#define SI5351_PLL_RESET_B (1<<7)
> +#define SI5351_PLL_RESET_A (1<<5)
> +
> +#define SI5351_CRYSTAL_LOAD 183
> +#define SI5351_CRYSTAL_LOAD_MASK (3<<6)
> +#define SI5351_CRYSTAL_LOAD_6PF (1<<6)
> +#define SI5351_CRYSTAL_LOAD_8PF (2<<6)
> +#define SI5351_CRYSTAL_LOAD_10PF (3<<6)
> +
> +#define SI5351_FANOUT_ENABLE 187
> +#define SI5351_CLKIN_ENABLE (1<<7)
> +#define SI5351_XTAL_ENABLE (1<<6)
> +#define SI5351_MULTISYNTH_ENABLE (1<<4)
> +
> +#endif
> diff --git a/include/linux/platform_data/si5351.h b/include/linux/platform_data/si5351.h
> new file mode 100644
> index 0000000..92dabca
> --- /dev/null
> +++ b/include/linux/platform_data/si5351.h
> @@ -0,0 +1,114 @@
> +/*
> + * Si5351A/B/C programmable clock generator platform_data.
> + */
> +
> +#ifndef __LINUX_PLATFORM_DATA_SI5351_H__
> +#define __LINUX_PLATFORM_DATA_SI5351_H__
> +
> +struct clk;
> +
> +/**
> + * enum si5351_variant - SiLabs Si5351 chip variant
> + * @SI5351_VARIANT_A: Si5351A (8 output clocks, XTAL input)
> + * @SI5351_VARIANT_A3: Si5351A MSOP10 (3 output clocks, XTAL input)
> + * @SI5351_VARIANT_B: Si5351B (8 output clocks, XTAL/VXCO input)
> + * @SI5351_VARIANT_C: Si5351C (8 output clocks, XTAL/CLKIN input)
> + */
> +enum si5351_variant {
> + SI5351_VARIANT_A = 1,
> + SI5351_VARIANT_A3 = 2,
> + SI5351_VARIANT_B = 3,
> + SI5351_VARIANT_C = 4,
> +};
> +
> +/**
> + * enum si5351_pll_src - Si5351 pll clock source
> + * @SI5351_PLL_SRC_DEFAULT: default, do not change eeprom config
> + * @SI5351_PLL_SRC_XTAL: pll source clock is XTAL input
> + * @SI5351_PLL_SRC_CLKIN: pll source clock is CLKIN input (Si5351C only)
> + */
> +enum si5351_pll_src {
> + SI5351_PLL_SRC_DEFAULT = 0,
> + SI5351_PLL_SRC_XTAL = 1,
> + SI5351_PLL_SRC_CLKIN = 2,
> +};
> +
> +/**
> + * enum si5351_multisynth_src - Si5351 multisynth clock source
> + * @SI5351_MULTISYNTH_SRC_DEFAULT: default, do not change eeprom config
> + * @SI5351_MULTISYNTH_SRC_VCO0: multisynth source clock is VCO0
> + * @SI5351_MULTISYNTH_SRC_VCO1: multisynth source clock is VCO1/VXCO
> + */
> +enum si5351_multisynth_src {
> + SI5351_MULTISYNTH_SRC_DEFAULT = 0,
> + SI5351_MULTISYNTH_SRC_VCO0 = 1,
> + SI5351_MULTISYNTH_SRC_VCO1 = 2,
> +};
> +
> +/**
> + * enum si5351_clkout_src - Si5351 clock output clock source
> + * @SI5351_CLKOUT_SRC_DEFAULT: default, do not change eeprom config
> + * @SI5351_CLKOUT_SRC_MSYNTH_N: clkout N source clock is multisynth N
> + * @SI5351_CLKOUT_SRC_MSYNTH_0_4: clkout N source clock is multisynth 0 (N<4)
> + * or 4 (N>=4)
> + * @SI5351_CLKOUT_SRC_XTAL: clkout N source clock is XTAL
> + * @SI5351_CLKOUT_SRC_CLKIN: clkout N source clock is CLKIN (Si5351C only)
> + */
> +enum si5351_clkout_src {
> + SI5351_CLKOUT_SRC_DEFAULT = 0,
> + SI5351_CLKOUT_SRC_MSYNTH_N = 1,
> + SI5351_CLKOUT_SRC_MSYNTH_0_4 = 2,
> + SI5351_CLKOUT_SRC_XTAL = 3,
> + SI5351_CLKOUT_SRC_CLKIN = 4,
> +};
> +
> +/**
> + * enum si5351_drive_strength - Si5351 clock output drive strength
> + * @SI5351_DRIVE_DEFAULT: default, do not change eeprom config
> + * @SI5351_DRIVE_2MA: 2mA clock output drive strength
> + * @SI5351_DRIVE_4MA: 4mA clock output drive strength
> + * @SI5351_DRIVE_6MA: 6mA clock output drive strength
> + * @SI5351_DRIVE_8MA: 8mA clock output drive strength
> + */
> +enum si5351_drive_strength {
> + SI5351_DRIVE_DEFAULT = 0,
> + SI5351_DRIVE_2MA = 2,
> + SI5351_DRIVE_4MA = 4,
> + SI5351_DRIVE_6MA = 6,
> + SI5351_DRIVE_8MA = 8,
> +};
> +
> +/**
> + * struct si5351_clkout_config - Si5351 clock output configuration
> + * @clkout: clkout number
> + * @multisynth_src: multisynth source clock
> + * @clkout_src: clkout source clock
> + * @pll_master: if true, clkout can also change pll rate
> + * @drive: output drive strength
> + * @rate: initial clkout rate, or default if 0
> + */
> +struct si5351_clkout_config {
> + enum si5351_multisynth_src multisynth_src;
> + enum si5351_clkout_src clkout_src;
> + enum si5351_drive_strength drive;
> + bool pll_master;
> + unsigned long rate;
> +};
> +
> +/**
> + * struct si5351_platform_data - Platform data for the Si5351 clock driver
> + * @variant: Si5351 chip variant
> + * @clk_xtal: xtal input clock
> + * @clk_clkin: clkin input clock
> + * @pll_src: array of pll source clock setting
> + * @clkout: array of clkout configuration
> + */
> +struct si5351_platform_data {
> + enum si5351_variant variant;
> + struct clk *clk_xtal;
> + struct clk *clk_clkin;
> + enum si5351_pll_src pll_src[2];
> + struct si5351_clkout_config clkout[8];
> +};
> +
> +#endif
> --
> 1.7.10.4
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists