| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 11 Apr 2013 16:30:47 -0400
From: Eduardo Valentin <eduardo.valentin@...com>
To: Amit Daniel Kachhap <amit.daniel@...sung.com>
CC: <linux-pm@...r.kernel.org>,
Thomas Abraham <thomas.abraham@...aro.org>,
Zhang Rui <rui.zhang@...el.com>,
<linux-samsung-soc@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <amit.kachhap@...il.com>,
Kukjin Kim <kgene.kim@...sung.com>, <eduardo.valentin@...com>
Subject: Re: [4/9] thermal: exynos: Bifurcate exynos thermal common and tmu
controller code
Amit,
On 26-03-2013 07:33, Amit Daniel Kachhap wrote:
> This code bifurcates exynos thermal implementation into common and sensor
> specific parts as it will simplify adding support for new temperature
> sensors. The file is named as exynos4210 because it was original SOC for
> which this driver was developed and then later SOC's(5250, 4412) were added
> into it. This change is needed to add different TMU sensor for future exynos5
> SOC.
>
> Signed-off-by: Amit Daniel Kachhap <amit.daniel@...sung.com>
>
> ---
> drivers/thermal/samsung/Kconfig | 24 +-
> drivers/thermal/samsung/Makefile | 4 +-
> drivers/thermal/samsung/exynos4210_thermal.c | 658 ++++++++++++++++
> drivers/thermal/samsung/exynos_common.c | 421 ++++++++++
> drivers/thermal/samsung/exynos_common.h | 73 ++
> drivers/thermal/samsung/exynos_thermal.c | 1093 --------------------------
> 6 files changed, 1172 insertions(+), 1101 deletions(-)
> create mode 100644 drivers/thermal/samsung/exynos4210_thermal.c
> create mode 100644 drivers/thermal/samsung/exynos_common.c
> create mode 100644 drivers/thermal/samsung/exynos_common.h
> delete mode 100644 drivers/thermal/samsung/exynos_thermal.c
>
Same comment as in patch 3. Can you please use --find-renames?
Besides, it would be interesting if you easier the review process by
splitting this patch into 2 at least. One for creating the _common.* and
another to rename the remaining to 4210_thermal.
BTW, This follow same design pattern as under
drivers/stating/ti-soc-thermal/ :-). I had to do similar design by
having common and specific split so that I could afford the support for
IPs with several sensors. Like OMAP5.
> diff --git a/drivers/thermal/samsung/Kconfig b/drivers/thermal/samsung/Kconfig
> index 5737b85..cefe693 100644
> --- a/drivers/thermal/samsung/Kconfig
> +++ b/drivers/thermal/samsung/Kconfig
> @@ -1,11 +1,23 @@
>
> -config EXYNOS_THERMAL
> - tristate "Temperature sensor on Samsung EXYNOS"
> +config EXYNOS_COMMON
> + tristate "Common thermal support for EXYNOS SOC's"
> depends on (ARCH_EXYNOS4 || ARCH_EXYNOS5)
> + help
> + If you say yes here you get support for EXYNOS TMU
> + (Thermal Management Unit) common registration/unregistration
> + functions to the core thermal layer and also to use the generic
> + cpu cooling API's.
> +
> +if EXYNOS_COMMON
> +
> +config EXYNOS4210_THERMAL
> + tristate "Temperature sensor on Samsung EXYNOS series SOC"
> + depends on (CPU_EXYNOS4210 || SOC_EXYNOS4212 || SOC_EXYNOS4412 || SOC_EXYNOS5250)
> depends on CPU_THERMAL
> help
> - If you say yes here you get support for TMU (Thermal Management
> - Unit) on SAMSUNG EXYNOS series of SoC. This helps in registering
> - the exynos thermal driver with the core thermal layer and cpu
> - cooling API's.
> + If you say yes here you can enable TMU (Thermal Management Unit) on
> + SAMSUNG EXYNOS 4210, 4412, 4414 and 5250 series of SoC. This option
> + initialises the TMU controller and registers/unregisters with exynos
> + common thermal layer.
>
> +endif
> diff --git a/drivers/thermal/samsung/Makefile b/drivers/thermal/samsung/Makefile
> index fa55df5..d51d0c2 100644
> --- a/drivers/thermal/samsung/Makefile
> +++ b/drivers/thermal/samsung/Makefile
> @@ -1,5 +1,5 @@
> #
> # Samsung thermal specific Makefile
> #
> -obj-$(CONFIG_EXYNOS_THERMAL) += exynos_thermal.o
> -
> +obj-$(CONFIG_EXYNOS_COMMON) += exynos_common.o
> +obj-$(CONFIG_EXYNOS4210_THERMAL) += exynos4210_thermal.o
> diff --git a/drivers/thermal/samsung/exynos4210_thermal.c b/drivers/thermal/samsung/exynos4210_thermal.c
> new file mode 100644
> index 0000000..09ea8c8
> --- /dev/null
> +++ b/drivers/thermal/samsung/exynos4210_thermal.c
> @@ -0,0 +1,658 @@
> +/*
> + * exynos4210_thermal.c - Samsung EXYNOS 4210, 4412, 5250 TMU
> + * (Thermal Management Unit)
> + *
> + * Copyright (C) 2011 Samsung Electronics
> + * Donggeun Kim <dg77.kim@...sung.com>
> + * Amit Daniel Kachhap <amit.kachhap@...aro.org>
> + * Amit Daniel Kachhap <amit.daniel@...sung.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
> + *
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/io.h>
> +#include <linux/interrupt.h>
> +#include <linux/kernel.h>
> +#include <linux/kobject.h>
> +#include <linux/module.h>
> +#include <linux/mutex.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/platform_data/exynos_thermal.h>
> +#include <linux/slab.h>
> +#include <linux/workqueue.h>
> +#include "exynos_common.h"
> +
> +/* Exynos generic registers */
> +#define EXYNOS_TMU_REG_TRIMINFO 0x0
> +#define EXYNOS_TMU_REG_CONTROL 0x20
> +#define EXYNOS_TMU_REG_STATUS 0x28
> +#define EXYNOS_TMU_REG_CURRENT_TEMP 0x40
> +#define EXYNOS_TMU_REG_INTEN 0x70
> +#define EXYNOS_TMU_REG_INTSTAT 0x74
> +#define EXYNOS_TMU_REG_INTCLEAR 0x78
> +
> +#define EXYNOS_TMU_TRIM_TEMP_MASK 0xff
> +#define EXYNOS_TMU_GAIN_SHIFT 8
> +#define EXYNOS_TMU_REF_VOLTAGE_SHIFT 24
> +#define EXYNOS_TMU_CORE_ON 3
> +#define EXYNOS_TMU_CORE_OFF 2
> +#define EXYNOS_TMU_DEF_CODE_TO_TEMP_OFFSET 50
> +
> +/* Exynos4210 specific registers */
> +#define EXYNOS4210_TMU_REG_THRESHOLD_TEMP 0x44
> +#define EXYNOS4210_TMU_REG_TRIG_LEVEL0 0x50
> +#define EXYNOS4210_TMU_REG_TRIG_LEVEL1 0x54
> +#define EXYNOS4210_TMU_REG_TRIG_LEVEL2 0x58
> +#define EXYNOS4210_TMU_REG_TRIG_LEVEL3 0x5C
> +#define EXYNOS4210_TMU_REG_PAST_TEMP0 0x60
> +#define EXYNOS4210_TMU_REG_PAST_TEMP1 0x64
> +#define EXYNOS4210_TMU_REG_PAST_TEMP2 0x68
> +#define EXYNOS4210_TMU_REG_PAST_TEMP3 0x6C
> +
> +#define EXYNOS4210_TMU_TRIG_LEVEL0_MASK 0x1
> +#define EXYNOS4210_TMU_TRIG_LEVEL1_MASK 0x10
> +#define EXYNOS4210_TMU_TRIG_LEVEL2_MASK 0x100
> +#define EXYNOS4210_TMU_TRIG_LEVEL3_MASK 0x1000
> +#define EXYNOS4210_TMU_INTCLEAR_VAL 0x1111
> +
> +/* Exynos5250 and Exynos4412 specific registers */
> +#define EXYNOS_TMU_TRIMINFO_CON 0x14
> +#define EXYNOS_THD_TEMP_RISE 0x50
> +#define EXYNOS_THD_TEMP_FALL 0x54
> +#define EXYNOS_EMUL_CON 0x80
> +
> +#define EXYNOS_TRIMINFO_RELOAD 0x1
> +#define EXYNOS_TMU_CLEAR_RISE_INT 0x111
> +#define EXYNOS_TMU_CLEAR_FALL_INT (0x111 << 12)
> +#define EXYNOS_MUX_ADDR_VALUE 6
> +#define EXYNOS_MUX_ADDR_SHIFT 20
> +#define EXYNOS_TMU_TRIP_MODE_SHIFT 13
> +
> +#define EFUSE_MIN_VALUE 40
> +#define EFUSE_MAX_VALUE 100
> +
> +#ifdef CONFIG_THERMAL_EMULATION
> +#define EXYNOS_EMUL_TIME 0x57F0
> +#define EXYNOS_EMUL_TIME_SHIFT 16
> +#define EXYNOS_EMUL_DATA_SHIFT 8
> +#define EXYNOS_EMUL_DATA_MASK 0xFF
> +#define EXYNOS_EMUL_ENABLE 0x1
> +#endif /* CONFIG_THERMAL_EMULATION */
> +
> +struct exynos_tmu_data {
> + struct exynos_tmu_platform_data *pdata;
> + struct resource *mem;
> + void __iomem *base;
> + int irq;
> + enum soc_type soc;
> + struct work_struct irq_work;
> + struct mutex lock;
> + struct clk *clk;
> + u8 temp_error1, temp_error2;
> +};
> +
> +/*
> + * TMU treats temperature as a mapped temperature code.
> + * The temperature is converted differently depending on the calibration type.
> + */
> +static int temp_to_code(struct exynos_tmu_data *data, u8 temp)
> +{
> + struct exynos_tmu_platform_data *pdata = data->pdata;
> + int temp_code;
> +
> + if (data->soc == SOC_ARCH_EXYNOS4210)
> + /* temp should range between 25 and 125 */
> + if (temp < 25 || temp > 125) {
> + temp_code = -EINVAL;
> + goto out;
> + }
> +
> + switch (pdata->cal_type) {
> + case TYPE_TWO_POINT_TRIMMING:
> + temp_code = (temp - 25) *
> + (data->temp_error2 - data->temp_error1) /
> + (85 - 25) + data->temp_error1;
> + break;
> + case TYPE_ONE_POINT_TRIMMING:
> + temp_code = temp + data->temp_error1 - 25;
> + break;
> + default:
> + temp_code = temp + EXYNOS_TMU_DEF_CODE_TO_TEMP_OFFSET;
> + break;
> + }
> +out:
> + return temp_code;
> +}
> +
> +/*
> + * Calculate a temperature value from a temperature code.
> + * The unit of the temperature is degree Celsius.
> + */
> +static int code_to_temp(struct exynos_tmu_data *data, u8 temp_code)
> +{
> + struct exynos_tmu_platform_data *pdata = data->pdata;
> + int temp;
> +
> + if (data->soc == SOC_ARCH_EXYNOS4210)
> + /* temp_code should range between 75 and 175 */
> + if (temp_code < 75 || temp_code > 175) {
> + temp = -ENODATA;
> + goto out;
> + }
> +
> + switch (pdata->cal_type) {
> + case TYPE_TWO_POINT_TRIMMING:
> + temp = (temp_code - data->temp_error1) * (85 - 25) /
> + (data->temp_error2 - data->temp_error1) + 25;
> + break;
> + case TYPE_ONE_POINT_TRIMMING:
> + temp = temp_code - data->temp_error1 + 25;
> + break;
> + default:
> + temp = temp_code - EXYNOS_TMU_DEF_CODE_TO_TEMP_OFFSET;
> + break;
> + }
> +out:
> + return temp;
> +}
> +
> +static int exynos_tmu_initialize(struct platform_device *pdev)
> +{
> + struct exynos_tmu_data *data = platform_get_drvdata(pdev);
> + struct exynos_tmu_platform_data *pdata = data->pdata;
> + unsigned int status, trim_info;
> + unsigned int rising_threshold = 0, falling_threshold = 0;
> + int ret = 0, threshold_code, i, trigger_levs = 0;
> +
> + mutex_lock(&data->lock);
> + clk_enable(data->clk);
> +
> + status = readb(data->base + EXYNOS_TMU_REG_STATUS);
> + if (!status) {
> + ret = -EBUSY;
> + goto out;
> + }
> +
> + if (data->soc == SOC_ARCH_EXYNOS) {
> + __raw_writel(EXYNOS_TRIMINFO_RELOAD,
> + data->base + EXYNOS_TMU_TRIMINFO_CON);
> + }
> + /* Save trimming info in order to perform calibration */
> + trim_info = readl(data->base + EXYNOS_TMU_REG_TRIMINFO);
> + data->temp_error1 = trim_info & EXYNOS_TMU_TRIM_TEMP_MASK;
> + data->temp_error2 = ((trim_info >> 8) & EXYNOS_TMU_TRIM_TEMP_MASK);
> +
> + if ((EFUSE_MIN_VALUE > data->temp_error1) ||
> + (data->temp_error1 > EFUSE_MAX_VALUE) ||
> + (data->temp_error2 != 0))
> + data->temp_error1 = pdata->efuse_value;
> +
> + /* Count trigger levels to be enabled */
> + for (i = 0; i < MAX_THRESHOLD_LEVS; i++)
> + if (pdata->trigger_levels[i])
> + trigger_levs++;
> +
> + if (data->soc == SOC_ARCH_EXYNOS4210) {
> + /* Write temperature code for threshold */
> + threshold_code = temp_to_code(data, pdata->threshold);
> + if (threshold_code < 0) {
> + ret = threshold_code;
> + goto out;
> + }
> + writeb(threshold_code,
> + data->base + EXYNOS4210_TMU_REG_THRESHOLD_TEMP);
> + for (i = 0; i < trigger_levs; i++)
> + writeb(pdata->trigger_levels[i],
> + data->base + EXYNOS4210_TMU_REG_TRIG_LEVEL0 + i * 4);
> +
> + writel(EXYNOS4210_TMU_INTCLEAR_VAL,
> + data->base + EXYNOS_TMU_REG_INTCLEAR);
> + } else if (data->soc == SOC_ARCH_EXYNOS) {
> + /* Write temperature code for rising and falling threshold */
> + for (i = 0; i < trigger_levs; i++) {
> + threshold_code = temp_to_code(data,
> + pdata->trigger_levels[i]);
> + if (threshold_code < 0) {
> + ret = threshold_code;
> + goto out;
> + }
> + rising_threshold |= threshold_code << 8 * i;
> + if (pdata->threshold_falling) {
> + threshold_code = temp_to_code(data,
> + pdata->trigger_levels[i] -
> + pdata->threshold_falling);
> + if (threshold_code > 0)
> + falling_threshold |=
> + threshold_code << 8 * i;
> + }
> + }
> +
> + writel(rising_threshold,
> + data->base + EXYNOS_THD_TEMP_RISE);
> + writel(falling_threshold,
> + data->base + EXYNOS_THD_TEMP_FALL);
> +
> + writel(EXYNOS_TMU_CLEAR_RISE_INT | EXYNOS_TMU_CLEAR_FALL_INT,
> + data->base + EXYNOS_TMU_REG_INTCLEAR);
> + }
> +out:
> + clk_disable(data->clk);
> + mutex_unlock(&data->lock);
> +
> + return ret;
> +}
> +
> +static void exynos_tmu_control(struct platform_device *pdev, bool on)
> +{
> + struct exynos_tmu_data *data = platform_get_drvdata(pdev);
> + struct exynos_tmu_platform_data *pdata = data->pdata;
> + unsigned int con, interrupt_en;
> +
> + mutex_lock(&data->lock);
> + clk_enable(data->clk);
> +
> + con = pdata->reference_voltage << EXYNOS_TMU_REF_VOLTAGE_SHIFT |
> + pdata->gain << EXYNOS_TMU_GAIN_SHIFT;
> +
> + if (data->soc == SOC_ARCH_EXYNOS) {
> + con |= pdata->noise_cancel_mode << EXYNOS_TMU_TRIP_MODE_SHIFT;
> + con |= (EXYNOS_MUX_ADDR_VALUE << EXYNOS_MUX_ADDR_SHIFT);
> + }
> +
> + if (on) {
> + con |= EXYNOS_TMU_CORE_ON;
> + interrupt_en = pdata->trigger_level3_en << 12 |
> + pdata->trigger_level2_en << 8 |
> + pdata->trigger_level1_en << 4 |
> + pdata->trigger_level0_en;
> + if (pdata->threshold_falling)
> + interrupt_en |= interrupt_en << 16;
> + } else {
> + con |= EXYNOS_TMU_CORE_OFF;
> + interrupt_en = 0; /* Disable all interrupts */
> + }
> + writel(interrupt_en, data->base + EXYNOS_TMU_REG_INTEN);
> + writel(con, data->base + EXYNOS_TMU_REG_CONTROL);
> +
> + clk_disable(data->clk);
> + mutex_unlock(&data->lock);
> +}
> +
> +static int exynos_tmu_read(struct exynos_tmu_data *data)
> +{
> + u8 temp_code;
> + int temp;
> +
> + mutex_lock(&data->lock);
> + clk_enable(data->clk);
> +
> + temp_code = readb(data->base + EXYNOS_TMU_REG_CURRENT_TEMP);
> + temp = code_to_temp(data, temp_code);
> +
> + clk_disable(data->clk);
> + mutex_unlock(&data->lock);
> +
> + return temp;
> +}
> +
> +#ifdef CONFIG_THERMAL_EMULATION
> +static int exynos_tmu_set_emulation(void *drv_data, unsigned long temp)
> +{
> + struct exynos_tmu_data *data = drv_data;
> + unsigned int reg;
> + int ret = -EINVAL;
> +
> + if (data->soc == SOC_ARCH_EXYNOS4210)
> + goto out;
> +
> + if (temp && temp < MCELSIUS)
> + goto out;
> +
> + mutex_lock(&data->lock);
> + clk_enable(data->clk);
> +
> + reg = readl(data->base + EXYNOS_EMUL_CON);
> +
> + if (temp) {
> + temp /= MCELSIUS;
> +
> + reg = (EXYNOS_EMUL_TIME << EXYNOS_EMUL_TIME_SHIFT) |
> + (temp_to_code(data, temp)
> + << EXYNOS_EMUL_DATA_SHIFT) | EXYNOS_EMUL_ENABLE;
> + } else {
> + reg &= ~EXYNOS_EMUL_ENABLE;
> + }
> +
> + writel(reg, data->base + EXYNOS_EMUL_CON);
> +
> + clk_disable(data->clk);
> + mutex_unlock(&data->lock);
> + return 0;
> +out:
> + return ret;
> +}
> +#else
> +static int exynos_tmu_set_emulation(void *drv_data, unsigned long temp)
> + { return -EINVAL; }
> +#endif/*CONFIG_THERMAL_EMULATION*/
> +
> +static struct thermal_sensor_conf exynos_sensor_conf = {
> + .name = "exynos-therm",
> + .read_temperature = (int (*)(void *))exynos_tmu_read,
> + .write_emul_temp = exynos_tmu_set_emulation,
> +};
> +
> +static void exynos_tmu_work(struct work_struct *work)
> +{
> + struct exynos_tmu_data *data = container_of(work,
> + struct exynos_tmu_data, irq_work);
> +
> + exynos_report_trigger(&exynos_sensor_conf);
> + mutex_lock(&data->lock);
> + clk_enable(data->clk);
> + if (data->soc == SOC_ARCH_EXYNOS)
> + writel(EXYNOS_TMU_CLEAR_RISE_INT |
> + EXYNOS_TMU_CLEAR_FALL_INT,
> + data->base + EXYNOS_TMU_REG_INTCLEAR);
> + else
> + writel(EXYNOS4210_TMU_INTCLEAR_VAL,
> + data->base + EXYNOS_TMU_REG_INTCLEAR);
> + clk_disable(data->clk);
> + mutex_unlock(&data->lock);
> +
> + enable_irq(data->irq);
> +}
> +
> +static irqreturn_t exynos_tmu_irq(int irq, void *id)
> +{
> + struct exynos_tmu_data *data = id;
> +
> + disable_irq_nosync(irq);
> + schedule_work(&data->irq_work);
> +
> + return IRQ_HANDLED;
> +}
> +
> +#if defined(CONFIG_CPU_EXYNOS4210)
> +static struct exynos_tmu_platform_data const exynos4210_default_tmu_data = {
> + .threshold = 80,
> + .trigger_levels[0] = 5,
> + .trigger_levels[1] = 20,
> + .trigger_levels[2] = 30,
> + .trigger_level0_en = 1,
> + .trigger_level1_en = 1,
> + .trigger_level2_en = 1,
> + .trigger_level3_en = 0,
> + .gain = 15,
> + .reference_voltage = 7,
> + .cal_type = TYPE_ONE_POINT_TRIMMING,
> + .freq_tab[0] = {
> + .freq_clip_max = 800 * 1000,
> + .temp_level = 85,
> + },
> + .freq_tab[1] = {
> + .freq_clip_max = 200 * 1000,
> + .temp_level = 100,
> + },
> + .freq_tab_count = 2,
> + .type = SOC_ARCH_EXYNOS4210,
> +};
> +#define EXYNOS4210_TMU_DRV_DATA (&exynos4210_default_tmu_data)
> +#else
> +#define EXYNOS4210_TMU_DRV_DATA (NULL)
> +#endif
> +
> +#if defined(CONFIG_SOC_EXYNOS5250) || defined(CONFIG_SOC_EXYNOS4412)
> +static struct exynos_tmu_platform_data const exynos_default_tmu_data = {
> + .threshold_falling = 10,
> + .trigger_levels[0] = 85,
> + .trigger_levels[1] = 103,
> + .trigger_levels[2] = 110,
> + .trigger_level0_en = 1,
> + .trigger_level1_en = 1,
> + .trigger_level2_en = 1,
> + .trigger_level3_en = 0,
> + .gain = 8,
> + .reference_voltage = 16,
> + .noise_cancel_mode = 4,
> + .cal_type = TYPE_ONE_POINT_TRIMMING,
> + .efuse_value = 55,
> + .freq_tab[0] = {
> + .freq_clip_max = 800 * 1000,
> + .temp_level = 85,
> + },
> + .freq_tab[1] = {
> + .freq_clip_max = 200 * 1000,
> + .temp_level = 103,
> + },
> + .freq_tab_count = 2,
> + .type = SOC_ARCH_EXYNOS,
> +};
> +#define EXYNOS_TMU_DRV_DATA (&exynos_default_tmu_data)
> +#else
> +#define EXYNOS_TMU_DRV_DATA (NULL)
> +#endif
> +
> +#ifdef CONFIG_OF
> +static const struct of_device_id exynos_tmu_match[] = {
> + {
> + .compatible = "samsung,exynos4210-tmu",
> + .data = (void *)EXYNOS4210_TMU_DRV_DATA,
> + },
> + {
> + .compatible = "samsung,exynos5250-tmu",
> + .data = (void *)EXYNOS_TMU_DRV_DATA,
> + },
> + {},
> +};
> +MODULE_DEVICE_TABLE(of, exynos_tmu_match);
> +#endif
> +
> +static struct platform_device_id exynos_tmu_driver_ids[] = {
> + {
> + .name = "exynos4210-tmu",
> + .driver_data = (kernel_ulong_t)EXYNOS4210_TMU_DRV_DATA,
> + },
> + {
> + .name = "exynos5250-tmu",
> + .driver_data = (kernel_ulong_t)EXYNOS_TMU_DRV_DATA,
> + },
> + { },
> +};
> +MODULE_DEVICE_TABLE(platform, exynos_tmu_driver_ids);
> +
> +static inline struct exynos_tmu_platform_data *exynos_get_driver_data(
> + struct platform_device *pdev)
> +{
> +#ifdef CONFIG_OF
> + if (pdev->dev.of_node) {
> + const struct of_device_id *match;
> + match = of_match_node(exynos_tmu_match, pdev->dev.of_node);
> + if (!match)
> + return NULL;
> + return (struct exynos_tmu_platform_data *) match->data;
> + }
> +#endif
> + return (struct exynos_tmu_platform_data *)
> + platform_get_device_id(pdev)->driver_data;
> +}
> +
> +static int exynos_tmu_probe(struct platform_device *pdev)
> +{
> + struct exynos_tmu_data *data;
> + struct exynos_tmu_platform_data *pdata = pdev->dev.platform_data;
> + int ret, i;
> +
> + if (!pdata)
> + pdata = exynos_get_driver_data(pdev);
> +
> + if (!pdata) {
> + dev_err(&pdev->dev, "No platform init data supplied.\n");
> + return -ENODEV;
> + }
> + data = devm_kzalloc(&pdev->dev, sizeof(struct exynos_tmu_data),
> + GFP_KERNEL);
> + if (!data) {
> + dev_err(&pdev->dev, "Failed to allocate driver structure\n");
> + return -ENOMEM;
> + }
> +
> + data->irq = platform_get_irq(pdev, 0);
> + if (data->irq < 0) {
> + dev_err(&pdev->dev, "Failed to get platform irq\n");
> + return data->irq;
> + }
> +
> + INIT_WORK(&data->irq_work, exynos_tmu_work);
> +
> + data->mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + if (!data->mem) {
> + dev_err(&pdev->dev, "Failed to get platform resource\n");
> + return -ENOENT;
> + }
> +
> + data->base = devm_ioremap_resource(&pdev->dev, data->mem);
> + if (IS_ERR(data->base))
> + return PTR_ERR(data->base);
> +
> + ret = devm_request_irq(&pdev->dev, data->irq, exynos_tmu_irq,
> + IRQF_TRIGGER_RISING, "exynos-tmu", data);
> + if (ret) {
> + dev_err(&pdev->dev, "Failed to request irq: %d\n", data->irq);
> + return ret;
> + }
> +
> + data->clk = clk_get(NULL, "tmu_apbif");
> + if (IS_ERR(data->clk)) {
> + dev_err(&pdev->dev, "Failed to get clock\n");
> + return PTR_ERR(data->clk);
> + }
> +
> + if (pdata->type == SOC_ARCH_EXYNOS ||
> + pdata->type == SOC_ARCH_EXYNOS4210)
> + data->soc = pdata->type;
> + else {
> + ret = -EINVAL;
> + dev_err(&pdev->dev, "Platform not supported\n");
> + goto err_clk;
> + }
> +
> + data->pdata = pdata;
> + platform_set_drvdata(pdev, data);
> + mutex_init(&data->lock);
> +
> + ret = exynos_tmu_initialize(pdev);
> + if (ret) {
> + dev_err(&pdev->dev, "Failed to initialize TMU\n");
> + goto err_clk;
> + }
> +
> + exynos_tmu_control(pdev, true);
> +
> + /* Register the sensor with thermal management interface */
> + (&exynos_sensor_conf)->driver_data = data;
> + exynos_sensor_conf.trip_data.trip_count = pdata->trigger_level0_en +
> + pdata->trigger_level1_en + pdata->trigger_level2_en +
> + pdata->trigger_level3_en;
> +
> + for (i = 0; i < exynos_sensor_conf.trip_data.trip_count; i++)
> + exynos_sensor_conf.trip_data.trip_val[i] =
> + pdata->threshold + pdata->trigger_levels[i];
> +
> + exynos_sensor_conf.trip_data.trigger_falling = pdata->threshold_falling;
> +
> + exynos_sensor_conf.cooling_data.freq_clip_count =
> + pdata->freq_tab_count;
> + for (i = 0; i < pdata->freq_tab_count; i++) {
> + exynos_sensor_conf.cooling_data.freq_data[i].freq_clip_max =
> + pdata->freq_tab[i].freq_clip_max;
> + exynos_sensor_conf.cooling_data.freq_data[i].temp_level =
> + pdata->freq_tab[i].temp_level;
> + }
> +
> + ret = exynos_register_thermal(&exynos_sensor_conf);
> + if (ret) {
> + dev_err(&pdev->dev, "Failed to register thermal interface\n");
> + goto err_clk;
> + }
> +
> + return 0;
> +err_clk:
> + platform_set_drvdata(pdev, NULL);
> + clk_put(data->clk);
> + return ret;
> +}
> +
> +static int exynos_tmu_remove(struct platform_device *pdev)
> +{
> + struct exynos_tmu_data *data = platform_get_drvdata(pdev);
> +
> + exynos_tmu_control(pdev, false);
> +
> + exynos_unregister_thermal(&exynos_sensor_conf);
> +
> + clk_put(data->clk);
> +
> + platform_set_drvdata(pdev, NULL);
> +
> + return 0;
> +}
> +
> +#ifdef CONFIG_PM_SLEEP
> +static int exynos_tmu_suspend(struct device *dev)
> +{
> + exynos_tmu_control(to_platform_device(dev), false);
> +
> + return 0;
> +}
> +
> +static int exynos_tmu_resume(struct device *dev)
> +{
> + struct platform_device *pdev = to_platform_device(dev);
> +
> + exynos_tmu_initialize(pdev);
> + exynos_tmu_control(pdev, true);
> +
> + return 0;
> +}
> +
> +static SIMPLE_DEV_PM_OPS(exynos_tmu_pm,
> + exynos_tmu_suspend, exynos_tmu_resume);
> +#define EXYNOS_TMU_PM (&exynos_tmu_pm)
> +#else
> +#define EXYNOS_TMU_PM NULL
> +#endif
> +
> +static struct platform_driver exynos_tmu_driver = {
> + .driver = {
> + .name = "exynos-tmu",
> + .owner = THIS_MODULE,
> + .pm = EXYNOS_TMU_PM,
> + .of_match_table = of_match_ptr(exynos_tmu_match),
> + },
> + .probe = exynos_tmu_probe,
> + .remove = exynos_tmu_remove,
> + .id_table = exynos_tmu_driver_ids,
> +};
> +
> +module_platform_driver(exynos_tmu_driver);
> +
> +MODULE_DESCRIPTION("EXYNOS TMU Driver");
> +MODULE_AUTHOR("Donggeun Kim <dg77.kim@...sung.com>");
> +MODULE_LICENSE("GPL");
> +MODULE_ALIAS("platform:exynos-tmu");
> diff --git a/drivers/thermal/samsung/exynos_common.c b/drivers/thermal/samsung/exynos_common.c
> new file mode 100644
> index 0000000..649d67c
> --- /dev/null
> +++ b/drivers/thermal/samsung/exynos_common.c
> @@ -0,0 +1,421 @@
> +/*
> + * exynos_common.c - Samsung EXYNOS common thermal file
> + *
> + * Copyright (C) 2013 Samsung Electronics
> + * Amit Daniel Kachhap <amit.daniel@...sung.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
> + *
> + */
> +
> +#include <linux/cpufreq.h>
> +#include <linux/cpu_cooling.h>
> +#include <linux/err.h>
> +#include <linux/io.h>
> +#include <linux/kernel.h>
> +#include <linux/kobject.h>
> +#include <linux/mutex.h>
> +#include <linux/platform_data/exynos_thermal.h>
> +#include <linux/slab.h>
> +#include <linux/thermal.h>
> +#include "exynos_common.h"
> +
> +struct exynos_thermal_zone {
> + enum thermal_device_mode mode;
> + struct thermal_zone_device *therm_dev;
> + struct thermal_cooling_device *cool_dev[MAX_COOLING_DEVICE];
> + unsigned int cool_dev_size;
> + struct platform_device *exynos4_dev;
> + struct thermal_sensor_conf *sensor_conf;
> + bool bind;
> +};
> +
> +/* Get mode callback functions for thermal zone */
> +static int exynos_get_mode(struct thermal_zone_device *thermal,
> + enum thermal_device_mode *mode)
> +{
> + struct exynos_thermal_zone *th_zone = thermal->devdata;
> + if (th_zone)
> + *mode = th_zone->mode;
> + return 0;
> +}
> +
> +/* Set mode callback functions for thermal zone */
> +static int exynos_set_mode(struct thermal_zone_device *thermal,
> + enum thermal_device_mode mode)
> +{
> + struct exynos_thermal_zone *th_zone = thermal->devdata;
> + if (!th_zone) {
> + pr_notice("thermal zone not registered\n");
> + return 0;
> + }
> +
> + mutex_lock(&thermal->lock);
> +
> + if (mode == THERMAL_DEVICE_ENABLED &&
> + !th_zone->sensor_conf->trip_data.trigger_falling)
> + thermal->polling_delay = IDLE_INTERVAL;
> + else
> + thermal->polling_delay = 0;
> +
> + mutex_unlock(&thermal->lock);
> +
> + th_zone->mode = mode;
> + thermal_zone_device_update(thermal);
> + pr_info("thermal polling set for duration=%d msec\n",
> + thermal->polling_delay);
> + return 0;
> +}
> +
> +
> +/* Get trip type callback functions for thermal zone */
> +static int exynos_get_trip_type(struct thermal_zone_device *thermal, int trip,
> + enum thermal_trip_type *type)
> +{
> + switch (GET_ZONE(trip)) {
> + case MONITOR_ZONE:
> + case WARN_ZONE:
> + *type = THERMAL_TRIP_ACTIVE;
> + break;
> + case PANIC_ZONE:
> + *type = THERMAL_TRIP_CRITICAL;
> + break;
> + default:
> + return -EINVAL;
> + }
> + return 0;
> +}
> +
> +/* Get trip temperature callback functions for thermal zone */
> +static int exynos_get_trip_temp(struct thermal_zone_device *thermal, int trip,
> + unsigned long *temp)
> +{
> + struct exynos_thermal_zone *th_zone = thermal->devdata;
> +
> + if (trip < GET_TRIP(MONITOR_ZONE) || trip > GET_TRIP(PANIC_ZONE))
> + return -EINVAL;
> +
> + *temp = th_zone->sensor_conf->trip_data.trip_val[trip];
> + /* convert the temperature into millicelsius */
> + *temp = *temp * MCELSIUS;
> +
> + return 0;
> +}
> +
> +/* Get critical temperature callback functions for thermal zone */
> +static int exynos_get_crit_temp(struct thermal_zone_device *thermal,
> + unsigned long *temp)
> +{
> + int ret;
> + /* Panic zone */
> + ret = exynos_get_trip_temp(thermal, GET_TRIP(PANIC_ZONE), temp);
> + return ret;
> +}
> +
> +int exynos_get_frequency_level(unsigned int cpu, unsigned int freq)
> +{
> + int i = 0, ret = -EINVAL;
> + struct cpufreq_frequency_table *table = NULL;
> +#ifdef CONFIG_CPU_FREQ
> + table = cpufreq_frequency_get_table(cpu);
> +#endif
> + if (!table)
> + return ret;
> +
> + while (table[i].frequency != CPUFREQ_TABLE_END) {
> + if (table[i].frequency == CPUFREQ_ENTRY_INVALID)
> + continue;
> + if (table[i].frequency == freq)
> + return i;
> + i++;
> + }
> + return ret;
> +}
> +
> +/* Bind callback functions for thermal zone */
> +static int exynos_bind(struct thermal_zone_device *thermal,
> + struct thermal_cooling_device *cdev)
> +{
> + int ret = 0, i, tab_size, level;
> + struct freq_clip_table *tab_ptr, *clip_data;
> + struct exynos_thermal_zone *th_zone = thermal->devdata;
> + struct thermal_sensor_conf *data = th_zone->sensor_conf;
> +
> + tab_ptr = (struct freq_clip_table *)data->cooling_data.freq_data;
> + tab_size = data->cooling_data.freq_clip_count;
> +
> + if (tab_ptr == NULL || tab_size == 0)
> + return -EINVAL;
> +
> + /* find the cooling device registered*/
> + for (i = 0; i < th_zone->cool_dev_size; i++)
> + if (cdev == th_zone->cool_dev[i])
> + break;
> +
> + /* No matching cooling device */
> + if (i == th_zone->cool_dev_size)
> + return 0;
> +
> + /* Bind the thermal zone to the cpufreq cooling device */
> + for (i = 0; i < tab_size; i++) {
> + clip_data = (struct freq_clip_table *)&(tab_ptr[i]);
> + level = exynos_get_frequency_level(0, clip_data->freq_clip_max);
> + if (level < 0)
> + return 0;
> + switch (GET_ZONE(i)) {
> + case MONITOR_ZONE:
> + case WARN_ZONE:
> + if (thermal_zone_bind_cooling_device(thermal, i, cdev,
> + level, 0)) {
> + pr_err("error binding cdev inst %d\n", i);
> + ret = -EINVAL;
> + }
> + th_zone->bind = true;
> + break;
> + default:
> + ret = -EINVAL;
> + }
> + }
> +
> + return ret;
> +}
> +
> +/* Unbind callback functions for thermal zone */
> +static int exynos_unbind(struct thermal_zone_device *thermal,
> + struct thermal_cooling_device *cdev)
> +{
> + int ret = 0, i, tab_size;
> + struct exynos_thermal_zone *th_zone = thermal->devdata;
> + struct thermal_sensor_conf *data = th_zone->sensor_conf;
> +
> + if (th_zone->bind == false)
> + return 0;
> +
> + tab_size = data->cooling_data.freq_clip_count;
> +
> + if (tab_size == 0)
> + return -EINVAL;
> +
> + /* find the cooling device registered*/
> + for (i = 0; i < th_zone->cool_dev_size; i++)
> + if (cdev == th_zone->cool_dev[i])
> + break;
> +
> + /* No matching cooling device */
> + if (i == th_zone->cool_dev_size)
> + return 0;
> +
> + /* Bind the thermal zone to the cpufreq cooling device */
> + for (i = 0; i < tab_size; i++) {
> + switch (GET_ZONE(i)) {
> + case MONITOR_ZONE:
> + case WARN_ZONE:
> + if (thermal_zone_unbind_cooling_device(thermal, i,
> + cdev)) {
> + pr_err("error unbinding cdev inst=%d\n", i);
> + ret = -EINVAL;
> + }
> + th_zone->bind = false;
> + break;
> + default:
> + ret = -EINVAL;
> + }
> + }
> + return ret;
> +}
> +
> +/* Get temperature callback functions for thermal zone */
> +static int exynos_get_temp(struct thermal_zone_device *thermal,
> + unsigned long *temp)
> +{
> + struct exynos_thermal_zone *th_zone = thermal->devdata;
> + void *data;
> +
> + if (!th_zone->sensor_conf) {
> + pr_info("Temperature sensor not initialised\n");
> + return -EINVAL;
> + }
> + data = th_zone->sensor_conf->driver_data;
> + *temp = th_zone->sensor_conf->read_temperature(data);
> + /* convert the temperature into millicelsius */
> + *temp = *temp * MCELSIUS;
> + return 0;
> +}
> +
> +/* Get temperature callback functions for thermal zone */
> +static int exynos_set_emul_temp(struct thermal_zone_device *thermal,
> + unsigned long temp)
> +{
> + void *data;
> + int ret = -EINVAL;
> + struct exynos_thermal_zone *th_zone = thermal->devdata;
> +
> + if (!th_zone->sensor_conf) {
> + pr_info("Temperature sensor not initialised\n");
> + return -EINVAL;
> + }
> + data = th_zone->sensor_conf->driver_data;
> + if (th_zone->sensor_conf->write_emul_temp)
> + ret = th_zone->sensor_conf->write_emul_temp(data, temp);
> + return ret;
> +}
> +
> +/* Get the temperature trend */
> +static int exynos_get_trend(struct thermal_zone_device *thermal,
> + int trip, enum thermal_trend *trend)
> +{
> + int ret = 0;
> + unsigned long trip_temp;
> +
> + ret = exynos_get_trip_temp(thermal, trip, &trip_temp);
> + if (ret < 0)
> + return ret;
> +
> + if (thermal->temperature >= trip_temp)
> + *trend = THERMAL_TREND_RAISE_FULL;
> + else
> + *trend = THERMAL_TREND_DROP_FULL;
> +
> + return ret;
> +}
> +/* Operation callback functions for thermal zone */
> +static struct thermal_zone_device_ops const exynos_dev_ops = {
> + .bind = exynos_bind,
> + .unbind = exynos_unbind,
> + .get_temp = exynos_get_temp,
> + .set_emul_temp = exynos_set_emul_temp,
> + .get_trend = exynos_get_trend,
> + .get_mode = exynos_get_mode,
> + .set_mode = exynos_set_mode,
> + .get_trip_type = exynos_get_trip_type,
> + .get_trip_temp = exynos_get_trip_temp,
> + .get_crit_temp = exynos_get_crit_temp,
> +};
> +
> +/*
> + * This function may be called from interrupt based temperature sensor
> + * when threshold is changed.
> + */
> +void exynos_report_trigger(struct thermal_sensor_conf *conf)
> +{
> + unsigned int i;
> + char data[10];
> + char *envp[] = { data, NULL };
> + struct exynos_thermal_zone *th_zone = conf->pzone_data;
> +
> + if (!th_zone || !th_zone->therm_dev)
> + return;
> + if (th_zone->bind == false) {
> + for (i = 0; i < th_zone->cool_dev_size; i++) {
> + if (!th_zone->cool_dev[i])
> + continue;
> + exynos_bind(th_zone->therm_dev,
> + th_zone->cool_dev[i]);
> + }
> + }
> +
> + thermal_zone_device_update(th_zone->therm_dev);
> +
> + mutex_lock(&th_zone->therm_dev->lock);
> + /* Find the level for which trip happened */
> + for (i = 0; i < th_zone->sensor_conf->trip_data.trip_count; i++) {
> + if (th_zone->therm_dev->last_temperature <
> + th_zone->sensor_conf->trip_data.trip_val[i] * MCELSIUS)
> + break;
> + }
> +
> + if (th_zone->mode == THERMAL_DEVICE_ENABLED &&
> + !th_zone->sensor_conf->trip_data.trigger_falling) {
> + if (i > 0)
> + th_zone->therm_dev->polling_delay = ACTIVE_INTERVAL;
> + else
> + th_zone->therm_dev->polling_delay = IDLE_INTERVAL;
> + }
> +
> + snprintf(data, sizeof(data), "%u", i);
> + kobject_uevent_env(&th_zone->therm_dev->device.kobj, KOBJ_CHANGE, envp);
> + mutex_unlock(&th_zone->therm_dev->lock);
> +}
> +
> +/* Register with the in-kernel thermal management */
> +int exynos_register_thermal(struct thermal_sensor_conf *sensor_conf)
> +{
> + int ret, id;
> + struct cpumask mask_val;
> + struct exynos_thermal_zone *th_zone;
> +
> + if (!sensor_conf || !sensor_conf->read_temperature) {
> + pr_err("Temperature sensor not initialised\n");
> + return -EINVAL;
> + }
> +
> + th_zone = kzalloc(sizeof(struct exynos_thermal_zone), GFP_KERNEL);
> + if (!th_zone)
> + return -ENOMEM;
> +
> + th_zone->sensor_conf = sensor_conf;
> + cpumask_set_cpu(0, &mask_val);
> + th_zone->cool_dev[0] = cpufreq_cooling_register(&mask_val);
> + if (IS_ERR(th_zone->cool_dev[0])) {
> + pr_err("Failed to register cpufreq cooling device\n");
> + ret = -EINVAL;
> + goto err_unregister;
> + }
> + th_zone->cool_dev_size++;
> +
> + th_zone->therm_dev = thermal_zone_device_register(sensor_conf->name,
> + EXYNOS_ZONE_COUNT, 0, th_zone, &exynos_dev_ops, NULL, 0,
> + sensor_conf->trip_data.trigger_falling ?
> + 0 : IDLE_INTERVAL);
> +
> + if (IS_ERR(th_zone->therm_dev)) {
> + pr_err("Failed to register thermal zone device\n");
> + ret = PTR_ERR(th_zone->therm_dev);
> + goto err_unregister;
> + }
> + th_zone->mode = THERMAL_DEVICE_ENABLED;
> + sensor_conf->pzone_data = th_zone;
> + id = th_zone->therm_dev->id;
> +
> + pr_info("Exynos: Kernel Thermal[%d] management registered\n", id);
> +
> + return 0;
> +
> +err_unregister:
> + exynos_unregister_thermal(sensor_conf);
> + return ret;
> +}
> +
> +/* Un-Register with the in-kernel thermal management */
> +void exynos_unregister_thermal(struct thermal_sensor_conf *sensor_conf)
> +{
> + int i, id;
> + struct exynos_thermal_zone *th_zone = sensor_conf->pzone_data;
> +
> + if (!th_zone)
> + return;
> +
> + id = th_zone->therm_dev->id;
> + if (th_zone->therm_dev)
> + thermal_zone_device_unregister(th_zone->therm_dev);
> +
> + for (i = 0; i < th_zone->cool_dev_size; i++) {
> + if (th_zone->cool_dev[i])
> + cpufreq_cooling_unregister(th_zone->cool_dev[i]);
> + }
> +
> + kfree(th_zone);
> + pr_info("Exynos: Kernel Thermal[%d] management unregistered\n", id);
> +}
> diff --git a/drivers/thermal/samsung/exynos_common.h b/drivers/thermal/samsung/exynos_common.h
> new file mode 100644
> index 0000000..b8d289e
> --- /dev/null
> +++ b/drivers/thermal/samsung/exynos_common.h
> @@ -0,0 +1,73 @@
> +/*
> + * exynos_common.h - Samsung EXYNOS common header file
> + *
> + * Copyright (C) 2013 Samsung Electronics
> + * Amit Daniel Kachhap <amit.daniel@...sung.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
> + *
> + */
> +
> +#ifndef _LINUX_EXYNOS_COMMON_H
> +#define _LINUX_EXYNOS_COMMON_H
> +
> +/* In-kernel thermal framework related macros & definations */
> +#define SENSOR_NAME_LEN 16
> +#define MAX_TRIP_COUNT 8
> +#define MAX_COOLING_DEVICE 4
> +#define MAX_THRESHOLD_LEVS 4
> +
> +#define ACTIVE_INTERVAL 500
> +#define IDLE_INTERVAL 10000
> +#define MCELSIUS 1000
> +
> +/* CPU Zone information */
> +#define PANIC_ZONE 4
> +#define WARN_ZONE 3
> +#define MONITOR_ZONE 2
> +#define SAFE_ZONE 1
> +
> +#define GET_ZONE(trip) (trip + 2)
> +#define GET_TRIP(zone) (zone - 2)
> +
> +#define EXYNOS_ZONE_COUNT 3
> +
> +struct thermal_trip_point_conf {
> + int trip_val[MAX_TRIP_COUNT];
> + int trip_count;
> + u8 trigger_falling;
> +};
> +
> +struct thermal_cooling_conf {
> + struct freq_clip_table freq_data[MAX_TRIP_COUNT];
> + int freq_clip_count;
> +};
> +
> +struct thermal_sensor_conf {
> + char name[SENSOR_NAME_LEN];
> + int (*read_temperature)(void *data);
> + int (*write_emul_temp)(void *drv_data, unsigned long temp);
> + struct thermal_trip_point_conf trip_data;
> + struct thermal_cooling_conf cooling_data;
> + void *driver_data;
> + void *pzone_data;
> +};
> +
> +/*Functions used exynos based thermal sensor driver*/
> +void exynos_unregister_thermal(struct thermal_sensor_conf *sensor_conf);
> +int exynos_register_thermal(struct thermal_sensor_conf *sensor_conf);
> +void exynos_report_trigger(struct thermal_sensor_conf *sensor_conf);
> +int exynos_get_frequency_level(unsigned int cpu, unsigned int freq);
> +#endif /* _LINUX_EXYNOS_COMMON_H */
> diff --git a/drivers/thermal/samsung/exynos_thermal.c b/drivers/thermal/samsung/exynos_thermal.c
> deleted file mode 100644
> index dc9b91b..0000000
> --- a/drivers/thermal/samsung/exynos_thermal.c
> +++ /dev/null
> @@ -1,1093 +0,0 @@
> -/*
> - * exynos_thermal.c - Samsung EXYNOS TMU (Thermal Management Unit)
> - *
> - * Copyright (C) 2011 Samsung Electronics
> - * Donggeun Kim <dg77.kim@...sung.com>
> - * Amit Daniel Kachhap <amit.kachhap@...aro.org>
> - *
> - * This program is free software; you can redistribute it and/or modify
> - * it under the terms of the GNU General Public License as published by
> - * the Free Software Foundation; either version 2 of the License, or
> - * (at your option) any later version.
> - *
> - * This program is distributed in the hope that it will be useful,
> - * but WITHOUT ANY WARRANTY; without even the implied warranty of
> - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> - * GNU General Public License for more details.
> - *
> - * You should have received a copy of the GNU General Public License
> - * along with this program; if not, write to the Free Software
> - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
> - *
> - */
> -
> -#include <linux/module.h>
> -#include <linux/err.h>
> -#include <linux/kernel.h>
> -#include <linux/slab.h>
> -#include <linux/platform_device.h>
> -#include <linux/interrupt.h>
> -#include <linux/clk.h>
> -#include <linux/workqueue.h>
> -#include <linux/sysfs.h>
> -#include <linux/kobject.h>
> -#include <linux/io.h>
> -#include <linux/mutex.h>
> -#include <linux/platform_data/exynos_thermal.h>
> -#include <linux/thermal.h>
> -#include <linux/cpufreq.h>
> -#include <linux/cpu_cooling.h>
> -#include <linux/of.h>
> -
> -#include <plat/cpu.h>
> -
> -/* Exynos generic registers */
> -#define EXYNOS_TMU_REG_TRIMINFO 0x0
> -#define EXYNOS_TMU_REG_CONTROL 0x20
> -#define EXYNOS_TMU_REG_STATUS 0x28
> -#define EXYNOS_TMU_REG_CURRENT_TEMP 0x40
> -#define EXYNOS_TMU_REG_INTEN 0x70
> -#define EXYNOS_TMU_REG_INTSTAT 0x74
> -#define EXYNOS_TMU_REG_INTCLEAR 0x78
> -
> -#define EXYNOS_TMU_TRIM_TEMP_MASK 0xff
> -#define EXYNOS_TMU_GAIN_SHIFT 8
> -#define EXYNOS_TMU_REF_VOLTAGE_SHIFT 24
> -#define EXYNOS_TMU_CORE_ON 3
> -#define EXYNOS_TMU_CORE_OFF 2
> -#define EXYNOS_TMU_DEF_CODE_TO_TEMP_OFFSET 50
> -
> -/* Exynos4210 specific registers */
> -#define EXYNOS4210_TMU_REG_THRESHOLD_TEMP 0x44
> -#define EXYNOS4210_TMU_REG_TRIG_LEVEL0 0x50
> -#define EXYNOS4210_TMU_REG_TRIG_LEVEL1 0x54
> -#define EXYNOS4210_TMU_REG_TRIG_LEVEL2 0x58
> -#define EXYNOS4210_TMU_REG_TRIG_LEVEL3 0x5C
> -#define EXYNOS4210_TMU_REG_PAST_TEMP0 0x60
> -#define EXYNOS4210_TMU_REG_PAST_TEMP1 0x64
> -#define EXYNOS4210_TMU_REG_PAST_TEMP2 0x68
> -#define EXYNOS4210_TMU_REG_PAST_TEMP3 0x6C
> -
> -#define EXYNOS4210_TMU_TRIG_LEVEL0_MASK 0x1
> -#define EXYNOS4210_TMU_TRIG_LEVEL1_MASK 0x10
> -#define EXYNOS4210_TMU_TRIG_LEVEL2_MASK 0x100
> -#define EXYNOS4210_TMU_TRIG_LEVEL3_MASK 0x1000
> -#define EXYNOS4210_TMU_INTCLEAR_VAL 0x1111
> -
> -/* Exynos5250 and Exynos4412 specific registers */
> -#define EXYNOS_TMU_TRIMINFO_CON 0x14
> -#define EXYNOS_THD_TEMP_RISE 0x50
> -#define EXYNOS_THD_TEMP_FALL 0x54
> -#define EXYNOS_EMUL_CON 0x80
> -
> -#define EXYNOS_TRIMINFO_RELOAD 0x1
> -#define EXYNOS_TMU_CLEAR_RISE_INT 0x111
> -#define EXYNOS_TMU_CLEAR_FALL_INT (0x111 << 12)
> -#define EXYNOS_MUX_ADDR_VALUE 6
> -#define EXYNOS_MUX_ADDR_SHIFT 20
> -#define EXYNOS_TMU_TRIP_MODE_SHIFT 13
> -
> -#define EFUSE_MIN_VALUE 40
> -#define EFUSE_MAX_VALUE 100
> -
> -/* In-kernel thermal framework related macros & definations */
> -#define SENSOR_NAME_LEN 16
> -#define MAX_TRIP_COUNT 8
> -#define MAX_COOLING_DEVICE 4
> -#define MAX_THRESHOLD_LEVS 4
> -
> -#define ACTIVE_INTERVAL 500
> -#define IDLE_INTERVAL 10000
> -#define MCELSIUS 1000
> -
> -#ifdef CONFIG_THERMAL_EMULATION
> -#define EXYNOS_EMUL_TIME 0x57F0
> -#define EXYNOS_EMUL_TIME_SHIFT 16
> -#define EXYNOS_EMUL_DATA_SHIFT 8
> -#define EXYNOS_EMUL_DATA_MASK 0xFF
> -#define EXYNOS_EMUL_ENABLE 0x1
> -#endif /* CONFIG_THERMAL_EMULATION */
> -
> -/* CPU Zone information */
> -#define PANIC_ZONE 4
> -#define WARN_ZONE 3
> -#define MONITOR_ZONE 2
> -#define SAFE_ZONE 1
> -
> -#define GET_ZONE(trip) (trip + 2)
> -#define GET_TRIP(zone) (zone - 2)
> -
> -#define EXYNOS_ZONE_COUNT 3
> -
> -struct exynos_tmu_data {
> - struct exynos_tmu_platform_data *pdata;
> - struct resource *mem;
> - void __iomem *base;
> - int irq;
> - enum soc_type soc;
> - struct work_struct irq_work;
> - struct mutex lock;
> - struct clk *clk;
> - u8 temp_error1, temp_error2;
> -};
> -
> -struct thermal_trip_point_conf {
> - int trip_val[MAX_TRIP_COUNT];
> - int trip_count;
> - u8 trigger_falling;
> -};
> -
> -struct thermal_cooling_conf {
> - struct freq_clip_table freq_data[MAX_TRIP_COUNT];
> - int freq_clip_count;
> -};
> -
> -struct thermal_sensor_conf {
> - char name[SENSOR_NAME_LEN];
> - int (*read_temperature)(void *data);
> - int (*write_emul_temp)(void *drv_data, unsigned long temp);
> - struct thermal_trip_point_conf trip_data;
> - struct thermal_cooling_conf cooling_data;
> - void *driver_data;
> - void *pzone_data;
> -};
> -
> -struct exynos_thermal_zone {
> - enum thermal_device_mode mode;
> - struct thermal_zone_device *therm_dev;
> - struct thermal_cooling_device *cool_dev[MAX_COOLING_DEVICE];
> - unsigned int cool_dev_size;
> - struct platform_device *exynos4_dev;
> - struct thermal_sensor_conf *sensor_conf;
> - bool bind;
> -};
> -
> -static void exynos_unregister_thermal(struct thermal_sensor_conf *sensor_conf);
> -static int exynos_register_thermal(struct thermal_sensor_conf *sensor_conf);
> -
> -/* Get mode callback functions for thermal zone */
> -static int exynos_get_mode(struct thermal_zone_device *thermal,
> - enum thermal_device_mode *mode)
> -{
> - struct exynos_thermal_zone *th_zone = thermal->devdata;
> - if (th_zone)
> - *mode = th_zone->mode;
> - return 0;
> -}
> -
> -/* Set mode callback functions for thermal zone */
> -static int exynos_set_mode(struct thermal_zone_device *thermal,
> - enum thermal_device_mode mode)
> -{
> - struct exynos_thermal_zone *th_zone = thermal->devdata;
> - if (!th_zone) {
> - pr_notice("thermal zone not registered\n");
> - return 0;
> - }
> -
> - mutex_lock(&thermal->lock);
> -
> - if (mode == THERMAL_DEVICE_ENABLED &&
> - !th_zone->sensor_conf->trip_data.trigger_falling)
> - thermal->polling_delay = IDLE_INTERVAL;
> - else
> - thermal->polling_delay = 0;
> -
> - mutex_unlock(&thermal->lock);
> -
> - th_zone->mode = mode;
> - thermal_zone_device_update(thermal);
> - pr_info("thermal polling set for duration=%d msec\n",
> - thermal->polling_delay);
> - return 0;
> -}
> -
> -
> -/* Get trip type callback functions for thermal zone */
> -static int exynos_get_trip_type(struct thermal_zone_device *thermal, int trip,
> - enum thermal_trip_type *type)
> -{
> - switch (GET_ZONE(trip)) {
> - case MONITOR_ZONE:
> - case WARN_ZONE:
> - *type = THERMAL_TRIP_ACTIVE;
> - break;
> - case PANIC_ZONE:
> - *type = THERMAL_TRIP_CRITICAL;
> - break;
> - default:
> - return -EINVAL;
> - }
> - return 0;
> -}
> -
> -/* Get trip temperature callback functions for thermal zone */
> -static int exynos_get_trip_temp(struct thermal_zone_device *thermal, int trip,
> - unsigned long *temp)
> -{
> - struct exynos_thermal_zone *th_zone = thermal->devdata;
> -
> - if (trip < GET_TRIP(MONITOR_ZONE) || trip > GET_TRIP(PANIC_ZONE))
> - return -EINVAL;
> -
> - *temp = th_zone->sensor_conf->trip_data.trip_val[trip];
> - /* convert the temperature into millicelsius */
> - *temp = *temp * MCELSIUS;
> -
> - return 0;
> -}
> -
> -/* Get critical temperature callback functions for thermal zone */
> -static int exynos_get_crit_temp(struct thermal_zone_device *thermal,
> - unsigned long *temp)
> -{
> - int ret;
> - /* Panic zone */
> - ret = exynos_get_trip_temp(thermal, GET_TRIP(PANIC_ZONE), temp);
> - return ret;
> -}
> -
> -static int exynos_get_frequency_level(unsigned int cpu, unsigned int freq)
> -{
> - int i = 0, ret = -EINVAL;
> - struct cpufreq_frequency_table *table = NULL;
> -#ifdef CONFIG_CPU_FREQ
> - table = cpufreq_frequency_get_table(cpu);
> -#endif
> - if (!table)
> - return ret;
> -
> - while (table[i].frequency != CPUFREQ_TABLE_END) {
> - if (table[i].frequency == CPUFREQ_ENTRY_INVALID)
> - continue;
> - if (table[i].frequency == freq)
> - return i;
> - i++;
> - }
> - return ret;
> -}
> -
> -/* Bind callback functions for thermal zone */
> -static int exynos_bind(struct thermal_zone_device *thermal,
> - struct thermal_cooling_device *cdev)
> -{
> - int ret = 0, i, tab_size, level;
> - struct freq_clip_table *tab_ptr, *clip_data;
> - struct exynos_thermal_zone *th_zone = thermal->devdata;
> - struct thermal_sensor_conf *data = th_zone->sensor_conf;
> -
> - tab_ptr = (struct freq_clip_table *)data->cooling_data.freq_data;
> - tab_size = data->cooling_data.freq_clip_count;
> -
> - if (tab_ptr == NULL || tab_size == 0)
> - return -EINVAL;
> -
> - /* find the cooling device registered*/
> - for (i = 0; i < th_zone->cool_dev_size; i++)
> - if (cdev == th_zone->cool_dev[i])
> - break;
> -
> - /* No matching cooling device */
> - if (i == th_zone->cool_dev_size)
> - return 0;
> -
> - /* Bind the thermal zone to the cpufreq cooling device */
> - for (i = 0; i < tab_size; i++) {
> - clip_data = (struct freq_clip_table *)&(tab_ptr[i]);
> - level = exynos_get_frequency_level(0, clip_data->freq_clip_max);
> - if (level < 0)
> - return 0;
> - switch (GET_ZONE(i)) {
> - case MONITOR_ZONE:
> - case WARN_ZONE:
> - if (thermal_zone_bind_cooling_device(thermal, i, cdev,
> - level, 0)) {
> - pr_err("error binding cdev inst %d\n", i);
> - ret = -EINVAL;
> - }
> - th_zone->bind = true;
> - break;
> - default:
> - ret = -EINVAL;
> - }
> - }
> -
> - return ret;
> -}
> -
> -/* Unbind callback functions for thermal zone */
> -static int exynos_unbind(struct thermal_zone_device *thermal,
> - struct thermal_cooling_device *cdev)
> -{
> - int ret = 0, i, tab_size;
> - struct exynos_thermal_zone *th_zone = thermal->devdata;
> - struct thermal_sensor_conf *data = th_zone->sensor_conf;
> -
> - if (th_zone->bind == false)
> - return 0;
> -
> - tab_size = data->cooling_data.freq_clip_count;
> -
> - if (tab_size == 0)
> - return -EINVAL;
> -
> - /* find the cooling device registered*/
> - for (i = 0; i < th_zone->cool_dev_size; i++)
> - if (cdev == th_zone->cool_dev[i])
> - break;
> -
> - /* No matching cooling device */
> - if (i == th_zone->cool_dev_size)
> - return 0;
> -
> - /* Bind the thermal zone to the cpufreq cooling device */
> - for (i = 0; i < tab_size; i++) {
> - switch (GET_ZONE(i)) {
> - case MONITOR_ZONE:
> - case WARN_ZONE:
> - if (thermal_zone_unbind_cooling_device(thermal, i,
> - cdev)) {
> - pr_err("error unbinding cdev inst=%d\n", i);
> - ret = -EINVAL;
> - }
> - th_zone->bind = false;
> - break;
> - default:
> - ret = -EINVAL;
> - }
> - }
> - return ret;
> -}
> -
> -/* Get temperature callback functions for thermal zone */
> -static int exynos_get_temp(struct thermal_zone_device *thermal,
> - unsigned long *temp)
> -{
> - struct exynos_thermal_zone *th_zone = thermal->devdata;
> - void *data;
> -
> - if (!th_zone->sensor_conf) {
> - pr_info("Temperature sensor not initialised\n");
> - return -EINVAL;
> - }
> - data = th_zone->sensor_conf->driver_data;
> - *temp = th_zone->sensor_conf->read_temperature(data);
> - /* convert the temperature into millicelsius */
> - *temp = *temp * MCELSIUS;
> - return 0;
> -}
> -
> -/* Get temperature callback functions for thermal zone */
> -static int exynos_set_emul_temp(struct thermal_zone_device *thermal,
> - unsigned long temp)
> -{
> - void *data;
> - int ret = -EINVAL;
> - struct exynos_thermal_zone *th_zone = thermal->devdata;
> -
> - if (!th_zone->sensor_conf) {
> - pr_info("Temperature sensor not initialised\n");
> - return -EINVAL;
> - }
> - data = th_zone->sensor_conf->driver_data;
> - if (th_zone->sensor_conf->write_emul_temp)
> - ret = th_zone->sensor_conf->write_emul_temp(data, temp);
> - return ret;
> -}
> -
> -/* Get the temperature trend */
> -static int exynos_get_trend(struct thermal_zone_device *thermal,
> - int trip, enum thermal_trend *trend)
> -{
> - int ret = 0;
> - unsigned long trip_temp;
> -
> - ret = exynos_get_trip_temp(thermal, trip, &trip_temp);
> - if (ret < 0)
> - return ret;
> -
> - if (thermal->temperature >= trip_temp)
> - *trend = THERMAL_TREND_RAISE_FULL;
> - else
> - *trend = THERMAL_TREND_DROP_FULL;
> -
> - return ret;
> -}
> -/* Operation callback functions for thermal zone */
> -static struct thermal_zone_device_ops const exynos_dev_ops = {
> - .bind = exynos_bind,
> - .unbind = exynos_unbind,
> - .get_temp = exynos_get_temp,
> - .set_emul_temp = exynos_set_emul_temp,
> - .get_trend = exynos_get_trend,
> - .get_mode = exynos_get_mode,
> - .set_mode = exynos_set_mode,
> - .get_trip_type = exynos_get_trip_type,
> - .get_trip_temp = exynos_get_trip_temp,
> - .get_crit_temp = exynos_get_crit_temp,
> -};
> -
> -/*
> - * This function may be called from interrupt based temperature sensor
> - * when threshold is changed.
> - */
> -static void exynos_report_trigger(struct thermal_sensor_conf *conf)
> -{
> - unsigned int i;
> - char data[10];
> - char *envp[] = { data, NULL };
> - struct exynos_thermal_zone *th_zone = conf->pzone_data;
> -
> - if (!th_zone || !th_zone->therm_dev)
> - return;
> - if (th_zone->bind == false) {
> - for (i = 0; i < th_zone->cool_dev_size; i++) {
> - if (!th_zone->cool_dev[i])
> - continue;
> - exynos_bind(th_zone->therm_dev,
> - th_zone->cool_dev[i]);
> - }
> - }
> -
> - thermal_zone_device_update(th_zone->therm_dev);
> -
> - mutex_lock(&th_zone->therm_dev->lock);
> - /* Find the level for which trip happened */
> - for (i = 0; i < th_zone->sensor_conf->trip_data.trip_count; i++) {
> - if (th_zone->therm_dev->last_temperature <
> - th_zone->sensor_conf->trip_data.trip_val[i] * MCELSIUS)
> - break;
> - }
> -
> - if (th_zone->mode == THERMAL_DEVICE_ENABLED &&
> - !th_zone->sensor_conf->trip_data.trigger_falling) {
> - if (i > 0)
> - th_zone->therm_dev->polling_delay = ACTIVE_INTERVAL;
> - else
> - th_zone->therm_dev->polling_delay = IDLE_INTERVAL;
> - }
> -
> - snprintf(data, sizeof(data), "%u", i);
> - kobject_uevent_env(&th_zone->therm_dev->device.kobj, KOBJ_CHANGE, envp);
> - mutex_unlock(&th_zone->therm_dev->lock);
> -}
> -
> -/* Register with the in-kernel thermal management */
> -static int exynos_register_thermal(struct thermal_sensor_conf *sensor_conf)
> -{
> - int ret;
> - struct cpumask mask_val;
> - struct exynos_thermal_zone *th_zone;
> -
> - if (!sensor_conf || !sensor_conf->read_temperature) {
> - pr_err("Temperature sensor not initialised\n");
> - return -EINVAL;
> - }
> -
> - th_zone = kzalloc(sizeof(struct exynos_thermal_zone), GFP_KERNEL);
> - if (!th_zone)
> - return -ENOMEM;
> -
> - th_zone->sensor_conf = sensor_conf;
> - cpumask_set_cpu(0, &mask_val);
> - th_zone->cool_dev[0] = cpufreq_cooling_register(&mask_val);
> - if (IS_ERR(th_zone->cool_dev[0])) {
> - pr_err("Failed to register cpufreq cooling device\n");
> - ret = -EINVAL;
> - goto err_unregister;
> - }
> - th_zone->cool_dev_size++;
> -
> - th_zone->therm_dev = thermal_zone_device_register(sensor_conf->name,
> - EXYNOS_ZONE_COUNT, 0, th_zone, &exynos_dev_ops, NULL, 0,
> - sensor_conf->trip_data.trigger_falling ?
> - 0 : IDLE_INTERVAL);
> -
> - if (IS_ERR(th_zone->therm_dev)) {
> - pr_err("Failed to register thermal zone device\n");
> - ret = PTR_ERR(th_zone->therm_dev);
> - goto err_unregister;
> - }
> - th_zone->mode = THERMAL_DEVICE_ENABLED;
> - sensor_conf->pzone_data = th_zone;
> -
> - pr_info("Exynos: Kernel Thermal management registered\n");
> -
> - return 0;
> -
> -err_unregister:
> - exynos_unregister_thermal(sensor_conf);
> - return ret;
> -}
> -
> -/* Un-Register with the in-kernel thermal management */
> -static void exynos_unregister_thermal(struct thermal_sensor_conf *sensor_conf)
> -{
> - int i;
> - struct exynos_thermal_zone *th_zone = sensor_conf->pzone_data;
> -
> - if (!th_zone)
> - return;
> -
> - if (th_zone->therm_dev)
> - thermal_zone_device_unregister(th_zone->therm_dev);
> -
> - for (i = 0; i < th_zone->cool_dev_size; i++) {
> - if (th_zone->cool_dev[i])
> - cpufreq_cooling_unregister(th_zone->cool_dev[i]);
> - }
> -
> - kfree(th_zone);
> - pr_info("Exynos: Kernel Thermal management unregistered\n");
> -}
> -
> -/*
> - * TMU treats temperature as a mapped temperature code.
> - * The temperature is converted differently depending on the calibration type.
> - */
> -static int temp_to_code(struct exynos_tmu_data *data, u8 temp)
> -{
> - struct exynos_tmu_platform_data *pdata = data->pdata;
> - int temp_code;
> -
> - if (data->soc == SOC_ARCH_EXYNOS4210)
> - /* temp should range between 25 and 125 */
> - if (temp < 25 || temp > 125) {
> - temp_code = -EINVAL;
> - goto out;
> - }
> -
> - switch (pdata->cal_type) {
> - case TYPE_TWO_POINT_TRIMMING:
> - temp_code = (temp - 25) *
> - (data->temp_error2 - data->temp_error1) /
> - (85 - 25) + data->temp_error1;
> - break;
> - case TYPE_ONE_POINT_TRIMMING:
> - temp_code = temp + data->temp_error1 - 25;
> - break;
> - default:
> - temp_code = temp + EXYNOS_TMU_DEF_CODE_TO_TEMP_OFFSET;
> - break;
> - }
> -out:
> - return temp_code;
> -}
> -
> -/*
> - * Calculate a temperature value from a temperature code.
> - * The unit of the temperature is degree Celsius.
> - */
> -static int code_to_temp(struct exynos_tmu_data *data, u8 temp_code)
> -{
> - struct exynos_tmu_platform_data *pdata = data->pdata;
> - int temp;
> -
> - if (data->soc == SOC_ARCH_EXYNOS4210)
> - /* temp_code should range between 75 and 175 */
> - if (temp_code < 75 || temp_code > 175) {
> - temp = -ENODATA;
> - goto out;
> - }
> -
> - switch (pdata->cal_type) {
> - case TYPE_TWO_POINT_TRIMMING:
> - temp = (temp_code - data->temp_error1) * (85 - 25) /
> - (data->temp_error2 - data->temp_error1) + 25;
> - break;
> - case TYPE_ONE_POINT_TRIMMING:
> - temp = temp_code - data->temp_error1 + 25;
> - break;
> - default:
> - temp = temp_code - EXYNOS_TMU_DEF_CODE_TO_TEMP_OFFSET;
> - break;
> - }
> -out:
> - return temp;
> -}
> -
> -static int exynos_tmu_initialize(struct platform_device *pdev)
> -{
> - struct exynos_tmu_data *data = platform_get_drvdata(pdev);
> - struct exynos_tmu_platform_data *pdata = data->pdata;
> - unsigned int status, trim_info;
> - unsigned int rising_threshold = 0, falling_threshold = 0;
> - int ret = 0, threshold_code, i, trigger_levs = 0;
> -
> - mutex_lock(&data->lock);
> - clk_enable(data->clk);
> -
> - status = readb(data->base + EXYNOS_TMU_REG_STATUS);
> - if (!status) {
> - ret = -EBUSY;
> - goto out;
> - }
> -
> - if (data->soc == SOC_ARCH_EXYNOS) {
> - __raw_writel(EXYNOS_TRIMINFO_RELOAD,
> - data->base + EXYNOS_TMU_TRIMINFO_CON);
> - }
> - /* Save trimming info in order to perform calibration */
> - trim_info = readl(data->base + EXYNOS_TMU_REG_TRIMINFO);
> - data->temp_error1 = trim_info & EXYNOS_TMU_TRIM_TEMP_MASK;
> - data->temp_error2 = ((trim_info >> 8) & EXYNOS_TMU_TRIM_TEMP_MASK);
> -
> - if ((EFUSE_MIN_VALUE > data->temp_error1) ||
> - (data->temp_error1 > EFUSE_MAX_VALUE) ||
> - (data->temp_error2 != 0))
> - data->temp_error1 = pdata->efuse_value;
> -
> - /* Count trigger levels to be enabled */
> - for (i = 0; i < MAX_THRESHOLD_LEVS; i++)
> - if (pdata->trigger_levels[i])
> - trigger_levs++;
> -
> - if (data->soc == SOC_ARCH_EXYNOS4210) {
> - /* Write temperature code for threshold */
> - threshold_code = temp_to_code(data, pdata->threshold);
> - if (threshold_code < 0) {
> - ret = threshold_code;
> - goto out;
> - }
> - writeb(threshold_code,
> - data->base + EXYNOS4210_TMU_REG_THRESHOLD_TEMP);
> - for (i = 0; i < trigger_levs; i++)
> - writeb(pdata->trigger_levels[i],
> - data->base + EXYNOS4210_TMU_REG_TRIG_LEVEL0 + i * 4);
> -
> - writel(EXYNOS4210_TMU_INTCLEAR_VAL,
> - data->base + EXYNOS_TMU_REG_INTCLEAR);
> - } else if (data->soc == SOC_ARCH_EXYNOS) {
> - /* Write temperature code for rising and falling threshold */
> - for (i = 0; i < trigger_levs; i++) {
> - threshold_code = temp_to_code(data,
> - pdata->trigger_levels[i]);
> - if (threshold_code < 0) {
> - ret = threshold_code;
> - goto out;
> - }
> - rising_threshold |= threshold_code << 8 * i;
> - if (pdata->threshold_falling) {
> - threshold_code = temp_to_code(data,
> - pdata->trigger_levels[i] -
> - pdata->threshold_falling);
> - if (threshold_code > 0)
> - falling_threshold |=
> - threshold_code << 8 * i;
> - }
> - }
> -
> - writel(rising_threshold,
> - data->base + EXYNOS_THD_TEMP_RISE);
> - writel(falling_threshold,
> - data->base + EXYNOS_THD_TEMP_FALL);
> -
> - writel(EXYNOS_TMU_CLEAR_RISE_INT | EXYNOS_TMU_CLEAR_FALL_INT,
> - data->base + EXYNOS_TMU_REG_INTCLEAR);
> - }
> -out:
> - clk_disable(data->clk);
> - mutex_unlock(&data->lock);
> -
> - return ret;
> -}
> -
> -static void exynos_tmu_control(struct platform_device *pdev, bool on)
> -{
> - struct exynos_tmu_data *data = platform_get_drvdata(pdev);
> - struct exynos_tmu_platform_data *pdata = data->pdata;
> - unsigned int con, interrupt_en;
> -
> - mutex_lock(&data->lock);
> - clk_enable(data->clk);
> -
> - con = pdata->reference_voltage << EXYNOS_TMU_REF_VOLTAGE_SHIFT |
> - pdata->gain << EXYNOS_TMU_GAIN_SHIFT;
> -
> - if (data->soc == SOC_ARCH_EXYNOS) {
> - con |= pdata->noise_cancel_mode << EXYNOS_TMU_TRIP_MODE_SHIFT;
> - con |= (EXYNOS_MUX_ADDR_VALUE << EXYNOS_MUX_ADDR_SHIFT);
> - }
> -
> - if (on) {
> - con |= EXYNOS_TMU_CORE_ON;
> - interrupt_en = pdata->trigger_level3_en << 12 |
> - pdata->trigger_level2_en << 8 |
> - pdata->trigger_level1_en << 4 |
> - pdata->trigger_level0_en;
> - if (pdata->threshold_falling)
> - interrupt_en |= interrupt_en << 16;
> - } else {
> - con |= EXYNOS_TMU_CORE_OFF;
> - interrupt_en = 0; /* Disable all interrupts */
> - }
> - writel(interrupt_en, data->base + EXYNOS_TMU_REG_INTEN);
> - writel(con, data->base + EXYNOS_TMU_REG_CONTROL);
> -
> - clk_disable(data->clk);
> - mutex_unlock(&data->lock);
> -}
> -
> -static int exynos_tmu_read(struct exynos_tmu_data *data)
> -{
> - u8 temp_code;
> - int temp;
> -
> - mutex_lock(&data->lock);
> - clk_enable(data->clk);
> -
> - temp_code = readb(data->base + EXYNOS_TMU_REG_CURRENT_TEMP);
> - temp = code_to_temp(data, temp_code);
> -
> - clk_disable(data->clk);
> - mutex_unlock(&data->lock);
> -
> - return temp;
> -}
> -
> -#ifdef CONFIG_THERMAL_EMULATION
> -static int exynos_tmu_set_emulation(void *drv_data, unsigned long temp)
> -{
> - struct exynos_tmu_data *data = drv_data;
> - unsigned int reg;
> - int ret = -EINVAL;
> -
> - if (data->soc == SOC_ARCH_EXYNOS4210)
> - goto out;
> -
> - if (temp && temp < MCELSIUS)
> - goto out;
> -
> - mutex_lock(&data->lock);
> - clk_enable(data->clk);
> -
> - reg = readl(data->base + EXYNOS_EMUL_CON);
> -
> - if (temp) {
> - temp /= MCELSIUS;
> -
> - reg = (EXYNOS_EMUL_TIME << EXYNOS_EMUL_TIME_SHIFT) |
> - (temp_to_code(data, temp)
> - << EXYNOS_EMUL_DATA_SHIFT) | EXYNOS_EMUL_ENABLE;
> - } else {
> - reg &= ~EXYNOS_EMUL_ENABLE;
> - }
> -
> - writel(reg, data->base + EXYNOS_EMUL_CON);
> -
> - clk_disable(data->clk);
> - mutex_unlock(&data->lock);
> - return 0;
> -out:
> - return ret;
> -}
> -#else
> -static int exynos_tmu_set_emulation(void *drv_data, unsigned long temp)
> - { return -EINVAL; }
> -#endif/*CONFIG_THERMAL_EMULATION*/
> -
> -static struct thermal_sensor_conf exynos_sensor_conf = {
> - .name = "exynos-therm",
> - .read_temperature = (int (*)(void *))exynos_tmu_read,
> - .write_emul_temp = exynos_tmu_set_emulation,
> -};
> -
> -static void exynos_tmu_work(struct work_struct *work)
> -{
> - struct exynos_tmu_data *data = container_of(work,
> - struct exynos_tmu_data, irq_work);
> -
> - exynos_report_trigger(&exynos_sensor_conf);
> - mutex_lock(&data->lock);
> - clk_enable(data->clk);
> - if (data->soc == SOC_ARCH_EXYNOS)
> - writel(EXYNOS_TMU_CLEAR_RISE_INT |
> - EXYNOS_TMU_CLEAR_FALL_INT,
> - data->base + EXYNOS_TMU_REG_INTCLEAR);
> - else
> - writel(EXYNOS4210_TMU_INTCLEAR_VAL,
> - data->base + EXYNOS_TMU_REG_INTCLEAR);
> - clk_disable(data->clk);
> - mutex_unlock(&data->lock);
> -
> - enable_irq(data->irq);
> -}
> -
> -static irqreturn_t exynos_tmu_irq(int irq, void *id)
> -{
> - struct exynos_tmu_data *data = id;
> -
> - disable_irq_nosync(irq);
> - schedule_work(&data->irq_work);
> -
> - return IRQ_HANDLED;
> -}
> -
> -#if defined(CONFIG_CPU_EXYNOS4210)
> -static struct exynos_tmu_platform_data const exynos4210_default_tmu_data = {
> - .threshold = 80,
> - .trigger_levels[0] = 5,
> - .trigger_levels[1] = 20,
> - .trigger_levels[2] = 30,
> - .trigger_level0_en = 1,
> - .trigger_level1_en = 1,
> - .trigger_level2_en = 1,
> - .trigger_level3_en = 0,
> - .gain = 15,
> - .reference_voltage = 7,
> - .cal_type = TYPE_ONE_POINT_TRIMMING,
> - .freq_tab[0] = {
> - .freq_clip_max = 800 * 1000,
> - .temp_level = 85,
> - },
> - .freq_tab[1] = {
> - .freq_clip_max = 200 * 1000,
> - .temp_level = 100,
> - },
> - .freq_tab_count = 2,
> - .type = SOC_ARCH_EXYNOS4210,
> -};
> -#define EXYNOS4210_TMU_DRV_DATA (&exynos4210_default_tmu_data)
> -#else
> -#define EXYNOS4210_TMU_DRV_DATA (NULL)
> -#endif
> -
> -#if defined(CONFIG_SOC_EXYNOS5250) || defined(CONFIG_SOC_EXYNOS4412)
> -static struct exynos_tmu_platform_data const exynos_default_tmu_data = {
> - .threshold_falling = 10,
> - .trigger_levels[0] = 85,
> - .trigger_levels[1] = 103,
> - .trigger_levels[2] = 110,
> - .trigger_level0_en = 1,
> - .trigger_level1_en = 1,
> - .trigger_level2_en = 1,
> - .trigger_level3_en = 0,
> - .gain = 8,
> - .reference_voltage = 16,
> - .noise_cancel_mode = 4,
> - .cal_type = TYPE_ONE_POINT_TRIMMING,
> - .efuse_value = 55,
> - .freq_tab[0] = {
> - .freq_clip_max = 800 * 1000,
> - .temp_level = 85,
> - },
> - .freq_tab[1] = {
> - .freq_clip_max = 200 * 1000,
> - .temp_level = 103,
> - },
> - .freq_tab_count = 2,
> - .type = SOC_ARCH_EXYNOS,
> -};
> -#define EXYNOS_TMU_DRV_DATA (&exynos_default_tmu_data)
> -#else
> -#define EXYNOS_TMU_DRV_DATA (NULL)
> -#endif
> -
> -#ifdef CONFIG_OF
> -static const struct of_device_id exynos_tmu_match[] = {
> - {
> - .compatible = "samsung,exynos4210-tmu",
> - .data = (void *)EXYNOS4210_TMU_DRV_DATA,
> - },
> - {
> - .compatible = "samsung,exynos5250-tmu",
> - .data = (void *)EXYNOS_TMU_DRV_DATA,
> - },
> - {},
> -};
> -MODULE_DEVICE_TABLE(of, exynos_tmu_match);
> -#endif
> -
> -static struct platform_device_id exynos_tmu_driver_ids[] = {
> - {
> - .name = "exynos4210-tmu",
> - .driver_data = (kernel_ulong_t)EXYNOS4210_TMU_DRV_DATA,
> - },
> - {
> - .name = "exynos5250-tmu",
> - .driver_data = (kernel_ulong_t)EXYNOS_TMU_DRV_DATA,
> - },
> - { },
> -};
> -MODULE_DEVICE_TABLE(platform, exynos_tmu_driver_ids);
> -
> -static inline struct exynos_tmu_platform_data *exynos_get_driver_data(
> - struct platform_device *pdev)
> -{
> -#ifdef CONFIG_OF
> - if (pdev->dev.of_node) {
> - const struct of_device_id *match;
> - match = of_match_node(exynos_tmu_match, pdev->dev.of_node);
> - if (!match)
> - return NULL;
> - return (struct exynos_tmu_platform_data *) match->data;
> - }
> -#endif
> - return (struct exynos_tmu_platform_data *)
> - platform_get_device_id(pdev)->driver_data;
> -}
> -
> -static int exynos_tmu_probe(struct platform_device *pdev)
> -{
> - struct exynos_tmu_data *data;
> - struct exynos_tmu_platform_data *pdata = pdev->dev.platform_data;
> - int ret, i;
> -
> - if (!pdata)
> - pdata = exynos_get_driver_data(pdev);
> -
> - if (!pdata) {
> - dev_err(&pdev->dev, "No platform init data supplied.\n");
> - return -ENODEV;
> - }
> - data = devm_kzalloc(&pdev->dev, sizeof(struct exynos_tmu_data),
> - GFP_KERNEL);
> - if (!data) {
> - dev_err(&pdev->dev, "Failed to allocate driver structure\n");
> - return -ENOMEM;
> - }
> -
> - data->irq = platform_get_irq(pdev, 0);
> - if (data->irq < 0) {
> - dev_err(&pdev->dev, "Failed to get platform irq\n");
> - return data->irq;
> - }
> -
> - INIT_WORK(&data->irq_work, exynos_tmu_work);
> -
> - data->mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> - if (!data->mem) {
> - dev_err(&pdev->dev, "Failed to get platform resource\n");
> - return -ENOENT;
> - }
> -
> - data->base = devm_ioremap_resource(&pdev->dev, data->mem);
> - if (IS_ERR(data->base))
> - return PTR_ERR(data->base);
> -
> - ret = devm_request_irq(&pdev->dev, data->irq, exynos_tmu_irq,
> - IRQF_TRIGGER_RISING, "exynos-tmu", data);
> - if (ret) {
> - dev_err(&pdev->dev, "Failed to request irq: %d\n", data->irq);
> - return ret;
> - }
> -
> - data->clk = clk_get(NULL, "tmu_apbif");
> - if (IS_ERR(data->clk)) {
> - dev_err(&pdev->dev, "Failed to get clock\n");
> - return PTR_ERR(data->clk);
> - }
> -
> - if (pdata->type == SOC_ARCH_EXYNOS ||
> - pdata->type == SOC_ARCH_EXYNOS4210)
> - data->soc = pdata->type;
> - else {
> - ret = -EINVAL;
> - dev_err(&pdev->dev, "Platform not supported\n");
> - goto err_clk;
> - }
> -
> - data->pdata = pdata;
> - platform_set_drvdata(pdev, data);
> - mutex_init(&data->lock);
> -
> - ret = exynos_tmu_initialize(pdev);
> - if (ret) {
> - dev_err(&pdev->dev, "Failed to initialize TMU\n");
> - goto err_clk;
> - }
> -
> - exynos_tmu_control(pdev, true);
> -
> - /* Register the sensor with thermal management interface */
> - (&exynos_sensor_conf)->driver_data = data;
> - exynos_sensor_conf.trip_data.trip_count = pdata->trigger_level0_en +
> - pdata->trigger_level1_en + pdata->trigger_level2_en +
> - pdata->trigger_level3_en;
> -
> - for (i = 0; i < exynos_sensor_conf.trip_data.trip_count; i++)
> - exynos_sensor_conf.trip_data.trip_val[i] =
> - pdata->threshold + pdata->trigger_levels[i];
> -
> - exynos_sensor_conf.trip_data.trigger_falling = pdata->threshold_falling;
> -
> - exynos_sensor_conf.cooling_data.freq_clip_count =
> - pdata->freq_tab_count;
> - for (i = 0; i < pdata->freq_tab_count; i++) {
> - exynos_sensor_conf.cooling_data.freq_data[i].freq_clip_max =
> - pdata->freq_tab[i].freq_clip_max;
> - exynos_sensor_conf.cooling_data.freq_data[i].temp_level =
> - pdata->freq_tab[i].temp_level;
> - }
> -
> - ret = exynos_register_thermal(&exynos_sensor_conf);
> - if (ret) {
> - dev_err(&pdev->dev, "Failed to register thermal interface\n");
> - goto err_clk;
> - }
> -
> - return 0;
> -err_clk:
> - platform_set_drvdata(pdev, NULL);
> - clk_put(data->clk);
> - return ret;
> -}
> -
> -static int exynos_tmu_remove(struct platform_device *pdev)
> -{
> - struct exynos_tmu_data *data = platform_get_drvdata(pdev);
> -
> - exynos_tmu_control(pdev, false);
> -
> - exynos_unregister_thermal(&exynos_sensor_conf);
> -
> - clk_put(data->clk);
> -
> - platform_set_drvdata(pdev, NULL);
> -
> - return 0;
> -}
> -
> -#ifdef CONFIG_PM_SLEEP
> -static int exynos_tmu_suspend(struct device *dev)
> -{
> - exynos_tmu_control(to_platform_device(dev), false);
> -
> - return 0;
> -}
> -
> -static int exynos_tmu_resume(struct device *dev)
> -{
> - struct platform_device *pdev = to_platform_device(dev);
> -
> - exynos_tmu_initialize(pdev);
> - exynos_tmu_control(pdev, true);
> -
> - return 0;
> -}
> -
> -static SIMPLE_DEV_PM_OPS(exynos_tmu_pm,
> - exynos_tmu_suspend, exynos_tmu_resume);
> -#define EXYNOS_TMU_PM (&exynos_tmu_pm)
> -#else
> -#define EXYNOS_TMU_PM NULL
> -#endif
> -
> -static struct platform_driver exynos_tmu_driver = {
> - .driver = {
> - .name = "exynos-tmu",
> - .owner = THIS_MODULE,
> - .pm = EXYNOS_TMU_PM,
> - .of_match_table = of_match_ptr(exynos_tmu_match),
> - },
> - .probe = exynos_tmu_probe,
> - .remove = exynos_tmu_remove,
> - .id_table = exynos_tmu_driver_ids,
> -};
> -
> -module_platform_driver(exynos_tmu_driver);
> -
> -MODULE_DESCRIPTION("EXYNOS TMU Driver");
> -MODULE_AUTHOR("Donggeun Kim <dg77.kim@...sung.com>");
> -MODULE_LICENSE("GPL");
> -MODULE_ALIAS("platform:exynos-tmu");
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists