| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1365776950-30094-4-git-send-email-gregory.clement@free-electrons.com>
Date: Fri, 12 Apr 2013 16:29:08 +0200
From: Gregory CLEMENT <gregory.clement@...e-electrons.com>
To: Jason Cooper <jason@...edaemon.net>, Andrew Lunn <andrew@...n.ch>,
Gregory Clement <gregory.clement@...e-electrons.com>
Cc: Grant Likely <grant.likely@...retlab.ca>,
Rob Herring <rob.herring@...xeda.com>,
Thomas Petazzoni <thomas.petazzoni@...e-electrons.com>,
Ezequiel Garcia <ezequiel.garcia@...e-electrons.com>,
linux-arm-kernel@...ts.infradead.org,
devicetree-discuss@...ts.ozlabs.org, linux-kernel@...r.kernel.org,
Arnd Bergmann <arnd@...db.de>, Olof Johansson <olof@...om.net>,
Nicolas Pitre <nico@...xnic.net>,
Lior Amsalem <alior@...vell.com>,
Maen Suleiman <maen@...vell.com>,
Tawfik Bayouk <tawfik@...vell.com>,
Shadi Ammouri <shadi@...vell.com>,
Eran Ben-Avi <benavi@...vell.com>,
Yehuda Yitschak <yehuday@...vell.com>,
Nadav Haklai <nadavh@...vell.com>,
Ike Pan <ike.pan@...onical.com>,
Chris Van Hoof <vanhoof@...onical.com>,
Dan Frazier <dann.frazier@...onical.com>,
Leif Lindholm <leif.lindholm@....com>,
Jon Masters <jcm@...hat.com>,
David Marlin <dmarlin@...hat.com>,
Sebastian Hesselbarth <sebastian.hesselbarth@...il.com>
Subject: [PATCH v4 3/5] ARM: dts: mvebu: Convert all the mvebu files to use the range property
This conversion will allow to keep 32 bits addresses for the internal
registers whereas the memory of the system will be 64 bits.
Later it will also ease the move of the mvebu-mbus driver to the
device tree support.
Signed-off-by: Gregory CLEMENT <gregory.clement@...e-electrons.com>
---
arch/arm/boot/dts/armada-370-db.dts | 16 ++--
arch/arm/boot/dts/armada-370-mirabox.dts | 16 ++--
arch/arm/boot/dts/armada-370-rd.dts | 14 +--
arch/arm/boot/dts/armada-370-xp.dtsi | 99 +++++++++++-----------
arch/arm/boot/dts/armada-370.dtsi | 65 +++++++-------
arch/arm/boot/dts/armada-xp-db.dts | 28 +++---
arch/arm/boot/dts/armada-xp-gp.dts | 22 ++---
arch/arm/boot/dts/armada-xp-mv78230.dtsi | 30 +++----
arch/arm/boot/dts/armada-xp-mv78260.dtsi | 44 +++++-----
arch/arm/boot/dts/armada-xp-mv78460.dtsi | 58 ++++++-------
arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts | 24 +++---
arch/arm/boot/dts/armada-xp.dtsi | 71 ++++++++--------
12 files changed, 245 insertions(+), 242 deletions(-)
diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts
index 6403acd..e766f8b 100644
--- a/arch/arm/boot/dts/armada-370-db.dts
+++ b/arch/arm/boot/dts/armada-370-db.dts
@@ -30,11 +30,11 @@
};
soc {
- serial@...12000 {
+ serial@...00 {
clock-frequency = <200000000>;
status = "okay";
};
- sata@...a0000 {
+ sata@...00 {
nr-ports = <2>;
status = "okay";
};
@@ -49,18 +49,18 @@
};
};
- ethernet@...70000 {
+ ethernet@...00 {
status = "okay";
phy = <&phy0>;
phy-mode = "rgmii-id";
};
- ethernet@...74000 {
+ ethernet@...00 {
status = "okay";
phy = <&phy1>;
phy-mode = "rgmii-id";
};
- mvsdio@...d4000 {
+ mvsdio@...00 {
pinctrl-0 = <&sdio_pins1>;
pinctrl-names = "default";
/*
@@ -75,15 +75,15 @@
/* No CD or WP GPIOs */
};
- usb@...50000 {
+ usb@...00 {
status = "okay";
};
- usb@...51000 {
+ usb@...00 {
status = "okay";
};
- spi0: spi@...10600 {
+ spi0: spi@...00 {
status = "okay";
spi-flash@0 {
diff --git a/arch/arm/boot/dts/armada-370-mirabox.dts b/arch/arm/boot/dts/armada-370-mirabox.dts
index 58ee793..6530ae3 100644
--- a/arch/arm/boot/dts/armada-370-mirabox.dts
+++ b/arch/arm/boot/dts/armada-370-mirabox.dts
@@ -25,11 +25,11 @@
};
soc {
- serial@...12000 {
+ serial@...00 {
clock-frequency = <200000000>;
status = "okay";
};
- timer@...20300 {
+ timer@...00 {
clock-frequency = <600000000>;
status = "okay";
};
@@ -79,18 +79,18 @@
reg = <1>;
};
};
- ethernet@...70000 {
+ ethernet@...00 {
status = "okay";
phy = <&phy0>;
phy-mode = "rgmii-id";
};
- ethernet@...74000 {
+ ethernet@...00 {
status = "okay";
phy = <&phy1>;
phy-mode = "rgmii-id";
};
- mvsdio@...d4000 {
+ mvsdio@...00 {
pinctrl-0 = <&sdio_pins3>;
pinctrl-names = "default";
status = "okay";
@@ -100,15 +100,15 @@
*/
};
- usb@...50000 {
+ usb@...00 {
status = "okay";
};
- usb@...51000 {
+ usb@...00 {
status = "okay";
};
- i2c@...11000 {
+ i2c@...00 {
status = "okay";
clock-frequency = <100000>;
pca9505: pca9505@25 {
diff --git a/arch/arm/boot/dts/armada-370-rd.dts b/arch/arm/boot/dts/armada-370-rd.dts
index 516dec3..83d5c04 100644
--- a/arch/arm/boot/dts/armada-370-rd.dts
+++ b/arch/arm/boot/dts/armada-370-rd.dts
@@ -28,11 +28,11 @@
};
soc {
- serial@...12000 {
+ serial@...00 {
clock-frequency = <200000000>;
status = "okay";
};
- sata@...a0000 {
+ sata@...00 {
nr-ports = <2>;
status = "okay";
};
@@ -47,29 +47,29 @@
};
};
- ethernet@...70000 {
+ ethernet@...00 {
status = "okay";
phy = <&phy0>;
phy-mode = "sgmii";
};
- ethernet@...74000 {
+ ethernet@...00 {
status = "okay";
phy = <&phy1>;
phy-mode = "rgmii-id";
};
- mvsdio@...d4000 {
+ mvsdio@...00 {
pinctrl-0 = <&sdio_pins1>;
pinctrl-names = "default";
status = "okay";
/* No CD or WP GPIOs */
};
- usb@...50000 {
+ usb@...00 {
status = "okay";
};
- usb@...51000 {
+ usb@...00 {
status = "okay";
};
};
diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi
index 972448c..da40ce5 100644
--- a/arch/arm/boot/dts/armada-370-xp.dtsi
+++ b/arch/arm/boot/dts/armada-370-xp.dtsi
@@ -28,54 +28,55 @@
};
};
+
soc {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
interrupt-parent = <&mpic>;
- ranges;
+ ranges = <0 0xd0000000 0x100000>;
- mpic: interrupt-controller@...20000 {
- compatible = "marvell,mpic";
- #interrupt-cells = <1>;
- #size-cells = <1>;
- interrupt-controller;
+ mpic: interrupt-controller@...00 {
+ compatible = "marvell,mpic";
+ #interrupt-cells = <1>;
+ #size-cells = <1>;
+ interrupt-controller;
};
- coherency-fabric@...20200 {
- compatible = "marvell,coherency-fabric";
- reg = <0xd0020200 0xb0>,
- <0xd0021810 0x1c>;
+ coherency-fabric@...00 {
+ compatible = "marvell,coherency-fabric";
+ reg = <0x20200 0xb0>,
+ <0x21810 0x1c>;
};
- serial@...12000 {
+ serial@...00 {
compatible = "snps,dw-apb-uart";
- reg = <0xd0012000 0x100>;
+ reg = <0x12000 0x100>;
reg-shift = <2>;
interrupts = <41>;
reg-io-width = <1>;
status = "disabled";
};
- serial@...12100 {
+ serial@...00 {
compatible = "snps,dw-apb-uart";
- reg = <0xd0012100 0x100>;
+ reg = <0x12100 0x100>;
reg-shift = <2>;
interrupts = <42>;
reg-io-width = <1>;
status = "disabled";
};
- timer@...20300 {
+ timer@...00 {
compatible = "marvell,armada-370-xp-timer";
- reg = <0xd0020300 0x30>,
- <0xd0021040 0x30>;
+ reg = <0x20300 0x30>,
+ <0x21040 0x30>;
interrupts = <37>, <38>, <39>, <40>, <5>, <6>;
clocks = <&coreclk 2>;
};
- sata@...a0000 {
+ sata@...00 {
compatible = "marvell,orion-sata";
- reg = <0xd00a0000 0x2400>;
+ reg = <0xa0000 0x2400>;
interrupts = <55>;
clocks = <&gateclk 15>, <&gateclk 30>;
clock-names = "0", "1";
@@ -86,28 +87,28 @@
#address-cells = <1>;
#size-cells = <0>;
compatible = "marvell,orion-mdio";
- reg = <0xd0072004 0x4>;
+ reg = <0x72004 0x4>;
};
- ethernet@...70000 {
+ ethernet@...00 {
compatible = "marvell,armada-370-neta";
- reg = <0xd0070000 0x2500>;
+ reg = <0x70000 0x2500>;
interrupts = <8>;
clocks = <&gateclk 4>;
status = "disabled";
};
- ethernet@...74000 {
+ ethernet@...00 {
compatible = "marvell,armada-370-neta";
- reg = <0xd0074000 0x2500>;
+ reg = <0x74000 0x2500>;
interrupts = <10>;
clocks = <&gateclk 3>;
status = "disabled";
};
- i2c0: i2c@...11000 {
+ i2c0: i2c@...00 {
compatible = "marvell,mv64xxx-i2c";
- reg = <0xd0011000 0x20>;
+ reg = <0x11000 0x20>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <31>;
@@ -116,9 +117,9 @@
status = "disabled";
};
- i2c1: i2c@...11100 {
+ i2c1: i2c@...00 {
compatible = "marvell,mv64xxx-i2c";
- reg = <0xd0011100 0x20>;
+ reg = <0x11100 0x20>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <32>;
@@ -129,35 +130,35 @@
rtc@...00 {
compatible = "marvell,orion-rtc";
- reg = <0xd0010300 0x20>;
+ reg = <0x10300 0x20>;
interrupts = <50>;
};
- mvsdio@...d4000 {
+ mvsdio@...00 {
compatible = "marvell,orion-sdio";
- reg = <0xd00d4000 0x200>;
+ reg = <0xd4000 0x200>;
interrupts = <54>;
clocks = <&gateclk 17>;
status = "disabled";
};
- usb@...50000 {
+ usb@...00 {
compatible = "marvell,orion-ehci";
- reg = <0xd0050000 0x500>;
+ reg = <0x50000 0x500>;
interrupts = <45>;
status = "disabled";
};
- usb@...51000 {
+ usb@...00 {
compatible = "marvell,orion-ehci";
- reg = <0xd0051000 0x500>;
+ reg = <0x51000 0x500>;
interrupts = <46>;
status = "disabled";
};
- spi0: spi@...10600 {
+ spi0: spi@...00 {
compatible = "marvell,orion-spi";
- reg = <0xd0010600 0x28>;
+ reg = <0x10600 0x28>;
#address-cells = <1>;
#size-cells = <0>;
cell-index = <0>;
@@ -166,9 +167,9 @@
status = "disabled";
};
- spi1: spi@...10680 {
+ spi1: spi@...80 {
compatible = "marvell,orion-spi";
- reg = <0xd0010680 0x28>;
+ reg = <0x10680 0x28>;
#address-cells = <1>;
#size-cells = <0>;
cell-index = <1>;
@@ -177,45 +178,45 @@
status = "disabled";
};
- devbus-bootcs@...10400 {
+ devbus-bootcs@...00 {
compatible = "marvell,mvebu-devbus";
- reg = <0xd0010400 0x8>;
+ reg = <0x10400 0x8>;
#address-cells = <1>;
#size-cells = <1>;
clocks = <&coreclk 0>;
status = "disabled";
};
- devbus-cs0@...10408 {
+ devbus-cs0@...08 {
compatible = "marvell,mvebu-devbus";
- reg = <0xd0010408 0x8>;
+ reg = <0x10408 0x8>;
#address-cells = <1>;
#size-cells = <1>;
clocks = <&coreclk 0>;
status = "disabled";
};
- devbus-cs1@...10410 {
+ devbus-cs1@...10 {
compatible = "marvell,mvebu-devbus";
- reg = <0xd0010410 0x8>;
+ reg = <0x10410 0x8>;
#address-cells = <1>;
#size-cells = <1>;
clocks = <&coreclk 0>;
status = "disabled";
};
- devbus-cs2@...10418 {
+ devbus-cs2@...18 {
compatible = "marvell,mvebu-devbus";
- reg = <0xd0010418 0x8>;
+ reg = <0x10418 0x8>;
#address-cells = <1>;
#size-cells = <1>;
clocks = <&coreclk 0>;
status = "disabled";
};
- devbus-cs3@...10420 {
+ devbus-cs3@...20 {
compatible = "marvell,mvebu-devbus";
- reg = <0xd0010420 0x8>;
+ reg = <0x10420 0x8>;
#address-cells = <1>;
#size-cells = <1>;
clocks = <&coreclk 0>;
diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi
index 209caeb..5c4fa65 100644
--- a/arch/arm/boot/dts/armada-370.dtsi
+++ b/arch/arm/boot/dts/armada-370.dtsi
@@ -28,14 +28,15 @@
};
soc {
- mpic: interrupt-controller@...20000 {
- reg = <0xd0020a00 0x1d0>,
- <0xd0021870 0x58>;
+
+ mpic: interrupt-controller@...00 {
+ reg = <0x20a00 0x1d0>,
+ <0x21870 0x58>;
};
- system-controller@...18200 {
+ system-controller@...00 {
compatible = "marvell,armada-370-xp-system-controller";
- reg = <0xd0018200 0x100>;
+ reg = <0x18200 0x100>;
};
L2: l2-cache {
@@ -47,7 +48,7 @@
pinctrl {
compatible = "marvell,mv88f6710-pinctrl";
- reg = <0xd0018000 0x38>;
+ reg = <0x18000 0x38>;
sdio_pins1: sdio-pins1 {
marvell,pins = "mpp9", "mpp11", "mpp12",
@@ -68,9 +69,9 @@
};
};
- gpio0: gpio@...18100 {
+ gpio0: gpio@...00 {
compatible = "marvell,orion-gpio";
- reg = <0xd0018100 0x40>;
+ reg = <0x18100 0x40>;
ngpios = <32>;
gpio-controller;
#gpio-cells = <2>;
@@ -79,9 +80,9 @@
interrupts = <82>, <83>, <84>, <85>;
};
- gpio1: gpio@...18140 {
+ gpio1: gpio@...40 {
compatible = "marvell,orion-gpio";
- reg = <0xd0018140 0x40>;
+ reg = <0x18140 0x40>;
ngpios = <32>;
gpio-controller;
#gpio-cells = <2>;
@@ -90,9 +91,9 @@
interrupts = <87>, <88>, <89>, <90>;
};
- gpio2: gpio@...18180 {
+ gpio2: gpio@...80 {
compatible = "marvell,orion-gpio";
- reg = <0xd0018180 0x40>;
+ reg = <0x18180 0x40>;
ngpios = <2>;
gpio-controller;
#gpio-cells = <2>;
@@ -101,23 +102,23 @@
interrupts = <91>;
};
- coreclk: mvebu-sar@...18230 {
+ coreclk: mvebu-sar@...30 {
compatible = "marvell,armada-370-core-clock";
- reg = <0xd0018230 0x08>;
+ reg = <0x18230 0x08>;
#clock-cells = <1>;
};
- gateclk: clock-gating-control@...18220 {
+ gateclk: clock-gating-control@...20 {
compatible = "marvell,armada-370-gating-clock";
- reg = <0xd0018220 0x4>;
+ reg = <0x18220 0x4>;
clocks = <&coreclk 0>;
#clock-cells = <1>;
};
- xor@...60800 {
+ xor@...00 {
compatible = "marvell,orion-xor";
- reg = <0xd0060800 0x100
- 0xd0060A00 0x100>;
+ reg = <0x60800 0x100
+ 0x60A00 0x100>;
status = "okay";
xor00 {
@@ -133,10 +134,10 @@
};
};
- xor@...60900 {
+ xor@...00 {
compatible = "marvell,orion-xor";
- reg = <0xd0060900 0x100
- 0xd0060b00 0x100>;
+ reg = <0x60900 0x100
+ 0x60b00 0x100>;
status = "okay";
xor10 {
@@ -152,18 +153,18 @@
};
};
- usb@...50000 {
+ usb@...00 {
clocks = <&coreclk 0>;
};
- usb@...51000 {
+ usb@...00 {
clocks = <&coreclk 0>;
};
- thermal@...18300 {
+ thermal@...00 {
compatible = "marvell,armada370-thermal";
- reg = <0xd0018300 0x4
- 0xd0018304 0x4>;
+ reg = <0x18300 0x4
+ 0x18304 0x4>;
status = "okay";
};
@@ -177,18 +178,18 @@
bus-range = <0x00 0xff>;
- reg = <0xd0040000 0x2000>, <0xd0080000 0x2000>;
+ reg = <0x40000 0x2000>, <0x80000 0x2000>;
reg-names = "pcie0.0", "pcie1.0";
- ranges = <0x82000000 0 0xd0040000 0xd0040000 0 0x00002000 /* Port 0.0 registers */
- 0x82000000 0 0xd0080000 0xd0080000 0 0x00002000 /* Port 1.0 registers */
+ ranges = <0x82000000 0 0x40000 0x40000 0 0x00002000 /* Port 0.0 registers */
+ 0x82000000 0 0x80000 0x80000 0 0x00002000 /* Port 1.0 registers */
0x82000000 0 0xe0000000 0xe0000000 0 0x08000000 /* non-prefetchable memory */
0x81000000 0 0 0xe8000000 0 0x00100000>; /* downstream I/O */
pcie@1,0 {
device_type = "pci";
- assigned-addresses = <0x82000800 0 0xd0040000 0 0x2000>;
+ assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
reg = <0x0800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
@@ -204,7 +205,7 @@
pcie@2,0 {
device_type = "pci";
- assigned-addresses = <0x82002800 0 0xd0080000 0 0x2000>;
+ assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
reg = <0x1000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
diff --git a/arch/arm/boot/dts/armada-xp-db.dts b/arch/arm/boot/dts/armada-xp-db.dts
index 54cc5bb..e37863f 100644
--- a/arch/arm/boot/dts/armada-xp-db.dts
+++ b/arch/arm/boot/dts/armada-xp-db.dts
@@ -30,24 +30,24 @@
};
soc {
- serial@...12000 {
+ serial@...00 {
clock-frequency = <250000000>;
status = "okay";
};
- serial@...12100 {
+ serial@...00 {
clock-frequency = <250000000>;
status = "okay";
};
- serial@...12200 {
+ serial@...00 {
clock-frequency = <250000000>;
status = "okay";
};
- serial@...12300 {
+ serial@...00 {
clock-frequency = <250000000>;
status = "okay";
};
- sata@...a0000 {
+ sata@...00 {
nr-ports = <2>;
status = "okay";
};
@@ -70,47 +70,47 @@
};
};
- ethernet@...70000 {
+ ethernet@...00 {
status = "okay";
phy = <&phy0>;
phy-mode = "rgmii-id";
};
- ethernet@...74000 {
+ ethernet@...00 {
status = "okay";
phy = <&phy1>;
phy-mode = "rgmii-id";
};
- ethernet@...30000 {
+ ethernet@...00 {
status = "okay";
phy = <&phy2>;
phy-mode = "sgmii";
};
- ethernet@...34000 {
+ ethernet@...00 {
status = "okay";
phy = <&phy3>;
phy-mode = "sgmii";
};
- mvsdio@...d4000 {
+ mvsdio@...00 {
pinctrl-0 = <&sdio_pins>;
pinctrl-names = "default";
status = "okay";
/* No CD or WP GPIOs */
};
- usb@...50000 {
+ usb@...00 {
status = "okay";
};
- usb@...51000 {
+ usb@...00 {
status = "okay";
};
- usb@...52000 {
+ usb@...00 {
status = "okay";
};
- spi0: spi@...10600 {
+ spi0: spi@...00 {
status = "okay";
spi-flash@0 {
diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts
index 04f28a7..55bcbff 100644
--- a/arch/arm/boot/dts/armada-xp-gp.dts
+++ b/arch/arm/boot/dts/armada-xp-gp.dts
@@ -37,24 +37,24 @@
};
soc {
- serial@...12000 {
+ serial@...00 {
clock-frequency = <250000000>;
status = "okay";
};
- serial@...12100 {
+ serial@...00 {
clock-frequency = <250000000>;
status = "okay";
};
- serial@...12200 {
+ serial@...00 {
clock-frequency = <250000000>;
status = "okay";
};
- serial@...12300 {
+ serial@...00 {
clock-frequency = <250000000>;
status = "okay";
};
- sata@...a0000 {
+ sata@...00 {
nr-ports = <2>;
status = "okay";
};
@@ -77,28 +77,28 @@
};
};
- ethernet@...70000 {
+ ethernet@...00 {
status = "okay";
phy = <&phy0>;
phy-mode = "rgmii-id";
};
- ethernet@...74000 {
+ ethernet@...00 {
status = "okay";
phy = <&phy1>;
phy-mode = "rgmii-id";
};
- ethernet@...30000 {
+ ethernet@...00 {
status = "okay";
phy = <&phy2>;
phy-mode = "rgmii-id";
};
- ethernet@...34000 {
+ ethernet@...00 {
status = "okay";
phy = <&phy3>;
phy-mode = "rgmii-id";
};
- spi0: spi@...10600 {
+ spi0: spi@...00 {
status = "okay";
spi-flash@0 {
@@ -110,7 +110,7 @@
};
};
- devbus-bootcs@...10400 {
+ devbus-bootcs@...00 {
status = "okay";
ranges = <0 0xf0000000 0x1000000>; /* @addr 0xf000000, size 0x1000000 */
diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
index e072a53..12905ab 100644
--- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
@@ -46,7 +46,7 @@
soc {
pinctrl {
compatible = "marvell,mv78230-pinctrl";
- reg = <0xd0018000 0x38>;
+ reg = <0x18000 0x38>;
sdio_pins: sdio-pins {
marvell,pins = "mpp30", "mpp31", "mpp32",
@@ -55,9 +55,9 @@
};
};
- gpio0: gpio@...18100 {
+ gpio0: gpio@...00 {
compatible = "marvell,orion-gpio";
- reg = <0xd0018100 0x40>;
+ reg = <0x18100 0x40>;
ngpios = <32>;
gpio-controller;
#gpio-cells = <2>;
@@ -66,9 +66,9 @@
interrupts = <82>, <83>, <84>, <85>;
};
- gpio1: gpio@...18140 {
+ gpio1: gpio@...40 {
compatible = "marvell,orion-gpio";
- reg = <0xd0018140 0x40>;
+ reg = <0x18140 0x40>;
ngpios = <17>;
gpio-controller;
#gpio-cells = <2>;
@@ -92,17 +92,17 @@
bus-range = <0x00 0xff>;
- ranges = <0x82000000 0 0xd0040000 0xd0040000 0 0x00002000 /* Port 0.0 registers */
- 0x82000000 0 0xd0042000 0xd0042000 0 0x00002000 /* Port 2.0 registers */
- 0x82000000 0 0xd0044000 0xd0044000 0 0x00002000 /* Port 0.1 registers */
- 0x82000000 0 0xd0048000 0xd0048000 0 0x00002000 /* Port 0.2 registers */
- 0x82000000 0 0xd004c000 0xd004c000 0 0x00002000 /* Port 0.3 registers */
+ ranges = <0x82000000 0 0x40000 0x40000 0 0x00002000 /* Port 0.0 registers */
+ 0x82000000 0 0x42000 0x42000 0 0x00002000 /* Port 2.0 registers */
+ 0x82000000 0 0x44000 0x44000 0 0x00002000 /* Port 0.1 registers */
+ 0x82000000 0 0x48000 0x48000 0 0x00002000 /* Port 0.2 registers */
+ 0x82000000 0 0x4c000 0x4c000 0 0x00002000 /* Port 0.3 registers */
0x82000000 0 0xe0000000 0xe0000000 0 0x08000000 /* non-prefetchable memory */
0x81000000 0 0 0xe8000000 0 0x00100000>; /* downstream I/O */
pcie@1,0 {
device_type = "pci";
- assigned-addresses = <0x82000800 0 0xd0040000 0 0x2000>;
+ assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
reg = <0x0800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
@@ -118,7 +118,7 @@
pcie@2,0 {
device_type = "pci";
- assigned-addresses = <0x82000800 0 0xd0044000 0 0x2000>;
+ assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
reg = <0x1000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
@@ -134,7 +134,7 @@
pcie@3,0 {
device_type = "pci";
- assigned-addresses = <0x82000800 0 0xd0048000 0 0x2000>;
+ assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
reg = <0x1800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
@@ -150,7 +150,7 @@
pcie@4,0 {
device_type = "pci";
- assigned-addresses = <0x82000800 0 0xd004c000 0 0x2000>;
+ assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>;
reg = <0x2000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
@@ -166,7 +166,7 @@
pcie@9,0 {
device_type = "pci";
- assigned-addresses = <0x82000800 0 0xd0042000 0 0x2000>;
+ assigned-addresses = <0x82000800 0 0x42000 0 0x2000>;
reg = <0x4800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
index 6dae1bc..1faacd1 100644
--- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
@@ -47,7 +47,7 @@
soc {
pinctrl {
compatible = "marvell,mv78260-pinctrl";
- reg = <0xd0018000 0x38>;
+ reg = <0x18000 0x38>;
sdio_pins: sdio-pins {
marvell,pins = "mpp30", "mpp31", "mpp32",
@@ -56,9 +56,9 @@
};
};
- gpio0: gpio@...18100 {
+ gpio0: gpio@...00 {
compatible = "marvell,orion-gpio";
- reg = <0xd0018100 0x40>;
+ reg = <0x18100 0x40>;
ngpios = <32>;
gpio-controller;
#gpio-cells = <2>;
@@ -67,9 +67,9 @@
interrupts = <82>, <83>, <84>, <85>;
};
- gpio1: gpio@...18140 {
+ gpio1: gpio@...40 {
compatible = "marvell,orion-gpio";
- reg = <0xd0018140 0x40>;
+ reg = <0x18140 0x40>;
ngpios = <32>;
gpio-controller;
#gpio-cells = <2>;
@@ -78,9 +78,9 @@
interrupts = <87>, <88>, <89>, <90>;
};
- gpio2: gpio@...18180 {
+ gpio2: gpio@...80 {
compatible = "marvell,orion-gpio";
- reg = <0xd0018180 0x40>;
+ reg = <0x18180 0x40>;
ngpios = <3>;
gpio-controller;
#gpio-cells = <2>;
@@ -89,9 +89,9 @@
interrupts = <91>;
};
- ethernet@...34000 {
+ ethernet@...00 {
compatible = "marvell,armada-370-neta";
- reg = <0xd0034000 0x2500>;
+ reg = <0x34000 0x2500>;
interrupts = <14>;
clocks = <&gateclk 1>;
status = "disabled";
@@ -112,19 +112,19 @@
bus-range = <0x00 0xff>;
- ranges = <0x82000000 0 0xd0040000 0xd0040000 0 0x00002000 /* Port 0.0 registers */
- 0x82000000 0 0xd0042000 0xd0042000 0 0x00002000 /* Port 2.0 registers */
- 0x82000000 0 0xd0044000 0xd0044000 0 0x00002000 /* Port 0.1 registers */
- 0x82000000 0 0xd0048000 0xd0048000 0 0x00002000 /* Port 0.2 registers */
- 0x82000000 0 0xd004c000 0xd004c000 0 0x00002000 /* Port 0.3 registers */
- 0x82000000 0 0xd0080000 0xd0080000 0 0x00002000 /* Port 1.0 registers */
- 0x82000000 0 0xd0082000 0xd0082000 0 0x00002000 /* Port 3.0 registers */
+ ranges = <0x82000000 0 0x40000 0x40000 0 0x00002000 /* Port 0.0 registers */
+ 0x82000000 0 0x42000 0x42000 0 0x00002000 /* Port 2.0 registers */
+ 0x82000000 0 0x44000 0x44000 0 0x00002000 /* Port 0.1 registers */
+ 0x82000000 0 0x48000 0x48000 0 0x00002000 /* Port 0.2 registers */
+ 0x82000000 0 0x4c000 0x4c000 0 0x00002000 /* Port 0.3 registers */
+ 0x82000000 0 0x80000 0x80000 0 0x00002000 /* Port 1.0 registers */
+ 0x82000000 0 0x82000 0x82000 0 0x00002000 /* Port 3.0 registers */
0x82000000 0 0xe0000000 0xe0000000 0 0x08000000 /* non-prefetchable memory */
0x81000000 0 0 0xe8000000 0 0x00100000>; /* downstream I/O */
pcie@1,0 {
device_type = "pci";
- assigned-addresses = <0x82000800 0 0xd0040000 0 0x2000>;
+ assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
reg = <0x0800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
@@ -140,7 +140,7 @@
pcie@2,0 {
device_type = "pci";
- assigned-addresses = <0x82000800 0 0xd0044000 0 0x2000>;
+ assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
reg = <0x1000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
@@ -156,7 +156,7 @@
pcie@3,0 {
device_type = "pci";
- assigned-addresses = <0x82000800 0 0xd0048000 0 0x2000>;
+ assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
reg = <0x1800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
@@ -172,7 +172,7 @@
pcie@4,0 {
device_type = "pci";
- assigned-addresses = <0x82000800 0 0xd004c000 0 0x2000>;
+ assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>;
reg = <0x2000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
@@ -188,7 +188,7 @@
pcie@9,0 {
device_type = "pci";
- assigned-addresses = <0x82000800 0 0xd0042000 0 0x2000>;
+ assigned-addresses = <0x82000800 0 0x42000 0 0x2000>;
reg = <0x4800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
@@ -204,7 +204,7 @@
pcie@10,0 {
device_type = "pci";
- assigned-addresses = <0x82000800 0 0xd0082000 0 0x2000>;
+ assigned-addresses = <0x82000800 0 0x82000 0 0x2000>;
reg = <0x5000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
index b9da5b8..ce4f80a 100644
--- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
@@ -62,7 +62,7 @@
soc {
pinctrl {
compatible = "marvell,mv78460-pinctrl";
- reg = <0xd0018000 0x38>;
+ reg = <0x18000 0x38>;
sdio_pins: sdio-pins {
marvell,pins = "mpp30", "mpp31", "mpp32",
@@ -71,9 +71,9 @@
};
};
- gpio0: gpio@...18100 {
+ gpio0: gpio@...00 {
compatible = "marvell,orion-gpio";
- reg = <0xd0018100 0x40>;
+ reg = <0x18100 0x40>;
ngpios = <32>;
gpio-controller;
#gpio-cells = <2>;
@@ -82,9 +82,9 @@
interrupts = <82>, <83>, <84>, <85>;
};
- gpio1: gpio@...18140 {
+ gpio1: gpio@...40 {
compatible = "marvell,orion-gpio";
- reg = <0xd0018140 0x40>;
+ reg = <0x18140 0x40>;
ngpios = <32>;
gpio-controller;
#gpio-cells = <2>;
@@ -93,9 +93,9 @@
interrupts = <87>, <88>, <89>, <90>;
};
- gpio2: gpio@...18180 {
+ gpio2: gpio@...80 {
compatible = "marvell,orion-gpio";
- reg = <0xd0018180 0x40>;
+ reg = <0x18180 0x40>;
ngpios = <3>;
gpio-controller;
#gpio-cells = <2>;
@@ -104,9 +104,9 @@
interrupts = <91>;
};
- ethernet@...34000 {
+ ethernet@...00 {
compatible = "marvell,armada-370-neta";
- reg = <0xd0034000 0x2500>;
+ reg = <0x34000 0x2500>;
interrupts = <14>;
clocks = <&gateclk 1>;
status = "disabled";
@@ -127,22 +127,22 @@
bus-range = <0x00 0xff>;
- ranges = <0x82000000 0 0xd0040000 0xd0040000 0 0x00002000 /* Port 0.0 registers */
- 0x82000000 0 0xd0042000 0xd0042000 0 0x00002000 /* Port 2.0 registers */
- 0x82000000 0 0xd0044000 0xd0044000 0 0x00002000 /* Port 0.1 registers */
- 0x82000000 0 0xd0048000 0xd0048000 0 0x00002000 /* Port 0.2 registers */
- 0x82000000 0 0xd004c000 0xd004c000 0 0x00002000 /* Port 0.3 registers */
- 0x82000000 0 0xd0080000 0xd0080000 0 0x00002000 /* Port 1.0 registers */
- 0x82000000 0 0xd0082000 0xd0082000 0 0x00002000 /* Port 3.0 registers */
- 0x82000000 0 0xd0084000 0xd0084000 0 0x00002000 /* Port 1.1 registers */
- 0x82000000 0 0xd0088000 0xd0088000 0 0x00002000 /* Port 1.2 registers */
- 0x82000000 0 0xd008c000 0xd008c000 0 0x00002000 /* Port 1.3 registers */
+ ranges = <0x82000000 0 0x40000 0x40000 0 0x00002000 /* Port 0.0 registers */
+ 0x82000000 0 0x42000 0x42000 0 0x00002000 /* Port 2.0 registers */
+ 0x82000000 0 0x44000 0x44000 0 0x00002000 /* Port 0.1 registers */
+ 0x82000000 0 0x48000 0x48000 0 0x00002000 /* Port 0.2 registers */
+ 0x82000000 0 0x4c000 0x4c000 0 0x00002000 /* Port 0.3 registers */
+ 0x82000000 0 0x80000 0x80000 0 0x00002000 /* Port 1.0 registers */
+ 0x82000000 0 0x82000 0x82000 0 0x00002000 /* Port 3.0 registers */
+ 0x82000000 0 0x84000 0x84000 0 0x00002000 /* Port 1.1 registers */
+ 0x82000000 0 0x88000 0x88000 0 0x00002000 /* Port 1.2 registers */
+ 0x82000000 0 0x8c000 0x8c000 0 0x00002000 /* Port 1.3 registers */
0x82000000 0 0xe0000000 0xe0000000 0 0x08000000 /* non-prefetchable memory */
0x81000000 0 0 0xe8000000 0 0x00100000>; /* downstream I/O */
pcie@1,0 {
device_type = "pci";
- assigned-addresses = <0x82000800 0 0xd0040000 0 0x2000>;
+ assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
reg = <0x0800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
@@ -158,7 +158,7 @@
pcie@2,0 {
device_type = "pci";
- assigned-addresses = <0x82001000 0 0xd0044000 0 0x2000>;
+ assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
reg = <0x1000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
@@ -174,7 +174,7 @@
pcie@3,0 {
device_type = "pci";
- assigned-addresses = <0x82001800 0 0xd0048000 0 0x2000>;
+ assigned-addresses = <0x82001800 0 0x48000 0 0x2000>;
reg = <0x1800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
@@ -190,7 +190,7 @@
pcie@4,0 {
device_type = "pci";
- assigned-addresses = <0x82002000 0 0xd004c000 0 0x2000>;
+ assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>;
reg = <0x2000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
@@ -206,7 +206,7 @@
pcie@5,0 {
device_type = "pci";
- assigned-addresses = <0x82002800 0 0xd0080000 0 0x2000>;
+ assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
reg = <0x2800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
@@ -222,7 +222,7 @@
pcie@6,0 {
device_type = "pci";
- assigned-addresses = <0x82003000 0 0xd0084000 0 0x2000>;
+ assigned-addresses = <0x82003000 0 0x84000 0 0x2000>;
reg = <0x3000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
@@ -238,7 +238,7 @@
pcie@7,0 {
device_type = "pci";
- assigned-addresses = <0x82003800 0 0xd0088000 0 0x2000>;
+ assigned-addresses = <0x82003800 0 0x88000 0 0x2000>;
reg = <0x3800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
@@ -254,7 +254,7 @@
pcie@8,0 {
device_type = "pci";
- assigned-addresses = <0x82004000 0 0xd008c000 0 0x2000>;
+ assigned-addresses = <0x82004000 0 0x8c000 0 0x2000>;
reg = <0x4000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
@@ -269,7 +269,7 @@
};
pcie@9,0 {
device_type = "pci";
- assigned-addresses = <0x82004800 0 0xd0042000 0 0x2000>;
+ assigned-addresses = <0x82004800 0 0x42000 0 0x2000>;
reg = <0x4800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
@@ -285,7 +285,7 @@
pcie@10,0 {
device_type = "pci";
- assigned-addresses = <0x82005000 0 0xd0082000 0 0x2000>;
+ assigned-addresses = <0x82005000 0 0x82000 0 0x2000>;
reg = <0x5000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
index 9d04f04..e9bc8bf 100644
--- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
+++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
@@ -27,11 +27,11 @@
};
soc {
- serial@...12000 {
+ serial@...00 {
clock-frequency = <250000000>;
status = "okay";
};
- serial@...12100 {
+ serial@...00 {
clock-frequency = <250000000>;
status = "okay";
};
@@ -96,31 +96,31 @@
};
};
- ethernet@...70000 {
+ ethernet@...00 {
status = "okay";
phy = <&phy0>;
phy-mode = "sgmii";
};
- ethernet@...74000 {
+ ethernet@...00 {
status = "okay";
phy = <&phy1>;
phy-mode = "sgmii";
};
- ethernet@...30000 {
+ ethernet@...00 {
status = "okay";
phy = <&phy2>;
phy-mode = "sgmii";
};
- ethernet@...34000 {
+ ethernet@...00 {
status = "okay";
phy = <&phy3>;
phy-mode = "sgmii";
};
- i2c@...11000 {
+ i2c@...00 {
status = "okay";
clock-frequency = <400000>;
};
- i2c@...11100 {
+ i2c@...00 {
status = "okay";
clock-frequency = <400000>;
@@ -129,18 +129,18 @@
reg = <0x30>;
};
};
- sata@...a0000 {
+ sata@...00 {
nr-ports = <2>;
status = "okay";
};
- usb@...50000 {
+ usb@...00 {
status = "okay";
};
- usb@...51000 {
+ usb@...00 {
status = "okay";
};
- devbus-bootcs@...10400 {
+ devbus-bootcs@...00 {
status = "okay";
ranges = <0 0xf0000000 0x8000000>; /* @addr 0xf000000, size 0x8000000 */
diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi
index ef3d413..465b9fa 100644
--- a/arch/arm/boot/dts/armada-xp.dtsi
+++ b/arch/arm/boot/dts/armada-xp.dtsi
@@ -22,83 +22,84 @@
model = "Marvell Armada XP family SoC";
compatible = "marvell,armadaxp", "marvell,armada-370-xp";
+
soc {
L2: l2-cache {
compatible = "marvell,aurora-system-cache";
- reg = <0xd0008000 0x1000>;
+ reg = <0x08000 0x1000>;
cache-id-part = <0x100>;
wt-override;
};
- mpic: interrupt-controller@...20000 {
- reg = <0xd0020a00 0x2d0>,
- <0xd0021070 0x58>;
+ mpic: interrupt-controller@...00 {
+ reg = <0x20a00 0x2d0>,
+ <0x21070 0x58>;
};
- armada-370-xp-pmsu@...22000 {
+ armada-370-xp-pmsu@...00 {
compatible = "marvell,armada-370-xp-pmsu";
- reg = <0xd0022100 0x430>,
- <0xd0020800 0x20>;
+ reg = <0x22100 0x430>,
+ <0x20800 0x20>;
};
- serial@...12200 {
+ serial@...00 {
compatible = "snps,dw-apb-uart";
- reg = <0xd0012200 0x100>;
+ reg = <0x12200 0x100>;
reg-shift = <2>;
interrupts = <43>;
reg-io-width = <1>;
status = "disabled";
};
- serial@...12300 {
+ serial@...00 {
compatible = "snps,dw-apb-uart";
- reg = <0xd0012300 0x100>;
+ reg = <0x12300 0x100>;
reg-shift = <2>;
interrupts = <44>;
reg-io-width = <1>;
status = "disabled";
};
- timer@...20300 {
+ timer@...00 {
marvell,timer-25Mhz;
};
- coreclk: mvebu-sar@...18230 {
+ coreclk: mvebu-sar@...30 {
compatible = "marvell,armada-xp-core-clock";
- reg = <0xd0018230 0x08>;
+ reg = <0x18230 0x08>;
#clock-cells = <1>;
};
- cpuclk: clock-complex@...18700 {
+ cpuclk: clock-complex@...00 {
#clock-cells = <1>;
compatible = "marvell,armada-xp-cpu-clock";
- reg = <0xd0018700 0xA0>;
+ reg = <0x18700 0xA0>;
clocks = <&coreclk 1>;
};
- gateclk: clock-gating-control@...18220 {
+ gateclk: clock-gating-control@...20 {
compatible = "marvell,armada-xp-gating-clock";
- reg = <0xd0018220 0x4>;
+ reg = <0x18220 0x4>;
clocks = <&coreclk 0>;
#clock-cells = <1>;
};
- system-controller@...18200 {
+ system-controller@...00 {
compatible = "marvell,armada-370-xp-system-controller";
- reg = <0xd0018200 0x500>;
+ reg = <0x18200 0x500>;
};
- ethernet@...30000 {
+ ethernet@...00 {
compatible = "marvell,armada-370-neta";
- reg = <0xd0030000 0x2500>;
+ reg = <0x30000 0x2500>;
interrupts = <12>;
clocks = <&gateclk 2>;
status = "disabled";
};
- xor@...60900 {
+ xor@...00 {
compatible = "marvell,orion-xor";
- reg = <0xd0060900 0x100
- 0xd0060b00 0x100>;
+ reg = <0x60900 0x100
+ 0x60b00 0x100>;
clocks = <&gateclk 22>;
status = "okay";
@@ -115,10 +116,10 @@
};
};
- xor@...f0900 {
+ xor@...00 {
compatible = "marvell,orion-xor";
- reg = <0xd00F0900 0x100
- 0xd00F0B00 0x100>;
+ reg = <0xF0900 0x100
+ 0xF0B00 0x100>;
clocks = <&gateclk 28>;
status = "okay";
@@ -135,26 +136,26 @@
};
};
- usb@...50000 {
+ usb@...00 {
clocks = <&gateclk 18>;
};
- usb@...51000 {
+ usb@...00 {
clocks = <&gateclk 19>;
};
- usb@...52000 {
+ usb@...00 {
compatible = "marvell,orion-ehci";
- reg = <0xd0052000 0x500>;
+ reg = <0x52000 0x500>;
interrupts = <47>;
clocks = <&gateclk 20>;
status = "disabled";
};
- thermal@...182b0 {
+ thermal@...b0 {
compatible = "marvell,armadaxp-thermal";
- reg = <0xd00182b0 0x4
- 0xd00184d0 0x4>;
+ reg = <0x182b0 0x4
+ 0x184d0 0x4>;
status = "okay";
};
};
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists