linux-kernel - [PATCH v2 1/2] regulator: ab8500-ext: Don't update info->update_val if set

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <1366126152.14735.2.camel@phoenix>
Date:	Tue, 16 Apr 2013 23:29:12 +0800
From:	Axel Lin <axel.lin@...ics.com>
To:	Mark Brown <broonie@...nsource.wolfsonmicro.com>
Cc:	Bengt Jonsson <bengt.g.jonsson@...ricsson.com>,
	Lee Jones <lee.jones@...aro.org>,
	Yvan FILLION <yvan.fillion@...ricsson.com>,
	Liam Girdwood <lgirdwood@...il.com>,
	linux-kernel@...r.kernel.org
Subject: [PATCH v2 1/2] regulator: ab8500-ext: Don't update info->update_val
 if set_mode() fails

This ensures info->update_val status is still correct if set_mode() call fails.
Otherwise, get_mode() may return wrong status if a set_mode() call fails.

Signed-off-by: Axel Lin <axel.lin@...ics.com>
---
 drivers/regulator/ab8500-ext.c |   26 ++++++++++++++++++--------
 1 file changed, 18 insertions(+), 8 deletions(-)

diff --git a/drivers/regulator/ab8500-ext.c b/drivers/regulator/ab8500-ext.c
index 20680f3..03faf9c 100644
--- a/drivers/regulator/ab8500-ext.c
+++ b/drivers/regulator/ab8500-ext.c
@@ -181,6 +181,7 @@ static int ab8500_ext_regulator_set_mode(struct regulator_dev *rdev,
 {
 	int ret = 0;
 	struct ab8500_ext_regulator_info *info = rdev_get_drvdata(rdev);
+	u8 regval;
 
 	if (info == NULL) {
 		dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
@@ -189,23 +190,30 @@ static int ab8500_ext_regulator_set_mode(struct regulator_dev *rdev,
 
 	switch (mode) {
 	case REGULATOR_MODE_NORMAL:
-		info->update_val = info->update_val_hp;
+		regval = info->update_val_hp;
 		break;
 	case REGULATOR_MODE_IDLE:
-		info->update_val = info->update_val_lp;
+		regval = info->update_val_lp;
 		break;
 
 	default:
 		return -EINVAL;
 	}
 
-	if (ab8500_ext_regulator_is_enabled(rdev)) {
-		u8 regval;
-
-		ret = enable(info, &regval);
-		if (ret < 0)
+	/* If regulator is enabled and info->cfg->hwreq is set, the regulator
+	   must be on in high power, so we don't need to write the register with
+	   the same value.
+	 */
+	if (ab8500_ext_regulator_is_enabled(rdev) &&
+	    !(info->cfg && info->cfg->hwreq)) {
+		ret = abx500_mask_and_set_register_interruptible(info->dev,
+					info->update_bank, info->update_reg,
+					info->update_mask, regval);
+		if (ret < 0) {
 			dev_err(rdev_get_dev(rdev),
 				"Could not set regulator mode.\n");
+			return ret;
+		}
 
 		dev_dbg(rdev_get_dev(rdev),
 			"%s-set_mode (bank, reg, mask, value): "
@@ -214,7 +222,9 @@ static int ab8500_ext_regulator_set_mode(struct regulator_dev *rdev,
 			info->update_mask, regval);
 	}
 
-	return ret;
+	info->update_val = regval;
+
+	return 0;
 }
 
 static unsigned int ab8500_ext_regulator_get_mode(struct regulator_dev *rdev)
-- 
1.7.10.4



--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/