| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1366205301-4249-1-git-send-email-rajagopal.venkat@linaro.org>
Date: Wed, 17 Apr 2013 18:58:21 +0530
From: Rajagopal Venkat <rajagopal.venkat@...aro.org>
To: myungjoo.ham@...sung.com, rjw@...k.pl,
Kevin Hilman <khilman@...aro.org>,
Alan Stern <stern@...land.harvard.edu>
Cc: patches@...aro.org, linaro-kernel@...ts.linaro.org,
linux-pm@...r.kernel.org, linux-kernel@...r.kernel.org,
Rajagopal Venkat <rajagopal.venkat@...aro.org>
Subject: [PATCH V3] PM / devfreq: tie suspend/resume to runtime-pm
Devfreq core runtime suspend/resume of a device is explicitly
handled by devfreq driver using devfreq_suspend_device() and
devfreq_resume_device() apis typically called from runtime
suspend/resume callbacks. This patch aims to take away this
from devfreq drivers and handle it from runtime-pm core. So
that devfreq core runtime suspend/resume of a device is
automatically done with runtime pm suspend/resume. The devfreq
drivers shouldn't be concerned on when to suspend/resume the
devfreq.
This patch is targeted to handle devfreq core load monitoring
runtime suspend/resume only. Not the actual hardware itself.
All the resources like clocks and regulators must still be
handled by device driver using runtime-pm. The sequence of
devfreq and device runtime suspend/resume is,
pm_runtime_suspend(dev) will first suspend device devfreq
(if available) before device is suspended to ensure devfreq load
monitoring is stopped and no device resources like clocks are
accessed while device suspend is in progress.
pm_runtime_resume(dev) will resume device devfreq(if available)
after device is resumed to ensure device resources like clocks
are ready for use.
As devfreq runtime suspend/resume is done automatically from runtime
core, this patch removes the existing devfreq_suspend_device() and
devfreq_resume_device() apis.
Signed-off-by: Rajagopal Venkat <rajagopal.venkat@...aro.org>
----
Changes from V2:
Updated change log to clarify patch deals with runtime suspend/resume
Changes from v1:
Improved change log and code comments
Added NULL check for devfreq runtime-pm callbacks
---
drivers/base/power/runtime.c | 21 ++++++++++++-
drivers/devfreq/devfreq.c | 69 +++++++++++++++++++++++++++++++++++++++---
include/linux/devfreq.h | 18 +++--------
include/linux/pm.h | 2 ++
4 files changed, 91 insertions(+), 19 deletions(-)
diff --git a/drivers/base/power/runtime.c b/drivers/base/power/runtime.c
index 3148b10..2438abc 100644
--- a/drivers/base/power/runtime.c
+++ b/drivers/base/power/runtime.c
@@ -11,6 +11,7 @@
#include <linux/export.h>
#include <linux/pm_runtime.h>
#include <trace/events/rpm.h>
+#include <linux/devfreq.h>
#include "power.h"
static int rpm_resume(struct device *dev, int rpmflags);
@@ -406,6 +407,14 @@ static int rpm_suspend(struct device *dev, int rpmflags)
__update_runtime_status(dev, RPM_SUSPENDING);
+ /*
+ * Try suspending devfreq before device is runtime suspended.
+ * It wouldn't make sense to continue devfreq load monitoring
+ * when device is runtime suspended.
+ */
+ if (dev->power.devfreq && dev->power.devfreq->runtime_suspend)
+ dev->power.devfreq->runtime_suspend(dev);
+
if (dev->pm_domain)
callback = dev->pm_domain->ops.runtime_suspend;
else if (dev->type && dev->type->pm)
@@ -421,8 +430,12 @@ static int rpm_suspend(struct device *dev, int rpmflags)
callback = dev->driver->pm->runtime_suspend;
retval = rpm_callback(callback, dev);
- if (retval)
+ if (retval) {
+ /* Resume back devfreq on device suspend failure */
+ if (dev->power.devfreq && dev->power.devfreq->runtime_resume)
+ dev->power.devfreq->runtime_resume(dev);
goto fail;
+ }
no_callback:
__update_runtime_status(dev, RPM_SUSPENDED);
@@ -661,6 +674,12 @@ static int rpm_resume(struct device *dev, int rpmflags)
__update_runtime_status(dev, RPM_ACTIVE);
if (parent)
atomic_inc(&parent->power.child_count);
+ /*
+ * Resume devfreq after runtime resume sequence to ensure
+ * device resources are available for devfreq load monitoring.
+ */
+ if (dev->power.devfreq && dev->power.devfreq->runtime_resume)
+ dev->power.devfreq->runtime_resume(dev);
}
wake_up_all(&dev->power.wait_queue);
diff --git a/drivers/devfreq/devfreq.c b/drivers/devfreq/devfreq.c
index 44c4079..b8dab0d 100644
--- a/drivers/devfreq/devfreq.c
+++ b/drivers/devfreq/devfreq.c
@@ -25,6 +25,7 @@
#include <linux/list.h>
#include <linux/printk.h>
#include <linux/hrtimer.h>
+#include <linux/pm_runtime.h>
#include "governor.h"
static struct class *devfreq_class;
@@ -42,6 +43,9 @@ static LIST_HEAD(devfreq_governor_list);
static LIST_HEAD(devfreq_list);
static DEFINE_MUTEX(devfreq_list_lock);
+static void devfreq_runtime_suspend(struct device *dev);
+static void devfreq_runtime_resume(struct device *dev);
+
/**
* find_device_devfreq() - find devfreq struct using device pointer
* @dev: device pointer used to lookup device devfreq.
@@ -387,6 +391,8 @@ static int devfreq_notifier_call(struct notifier_block *nb, unsigned long type,
*/
static void _remove_devfreq(struct devfreq *devfreq, bool skip)
{
+ unsigned long flags;
+
mutex_lock(&devfreq_list_lock);
if (IS_ERR(find_device_devfreq(devfreq->dev.parent))) {
mutex_unlock(&devfreq_list_lock);
@@ -400,6 +406,10 @@ static void _remove_devfreq(struct devfreq *devfreq, bool skip)
devfreq->governor->event_handler(devfreq,
DEVFREQ_GOV_STOP, NULL);
+ spin_lock_irqsave(&devfreq->dev.parent->power.lock, flags);
+ devfreq->dev.parent->power.devfreq = NULL;
+ spin_unlock_irqrestore(&devfreq->dev.parent->power.lock, flags);
+
if (devfreq->profile->exit)
devfreq->profile->exit(devfreq->dev.parent);
@@ -442,6 +452,7 @@ struct devfreq *devfreq_add_device(struct device *dev,
{
struct devfreq *devfreq;
struct devfreq_governor *governor;
+ unsigned long flags;
int err = 0;
if (!dev || !profile || !governor_name) {
@@ -476,6 +487,12 @@ struct devfreq *devfreq_add_device(struct device *dev,
devfreq->previous_freq = profile->initial_freq;
devfreq->data = data;
devfreq->nb.notifier_call = devfreq_notifier_call;
+ devfreq->runtime_suspend = devfreq_runtime_suspend;
+ devfreq->runtime_resume = devfreq_runtime_resume;
+ spin_lock_irqsave(&dev->power.lock, flags);
+ dev->power.devfreq = devfreq;
+ spin_unlock_irqrestore(&dev->power.lock, flags);
+
devfreq->trans_table = devm_kzalloc(dev, sizeof(unsigned int) *
devfreq->profile->max_state *
@@ -549,7 +566,7 @@ EXPORT_SYMBOL(devfreq_remove_device);
* (e.g., runtime_suspend, suspend) of the device driver that
* holds the devfreq.
*/
-int devfreq_suspend_device(struct devfreq *devfreq)
+static int devfreq_suspend_device(struct devfreq *devfreq)
{
if (!devfreq)
return -EINVAL;
@@ -560,7 +577,6 @@ int devfreq_suspend_device(struct devfreq *devfreq)
return devfreq->governor->event_handler(devfreq,
DEVFREQ_GOV_SUSPEND, NULL);
}
-EXPORT_SYMBOL(devfreq_suspend_device);
/**
* devfreq_resume_device() - Resume devfreq of a device.
@@ -570,7 +586,7 @@ EXPORT_SYMBOL(devfreq_suspend_device);
* (e.g., runtime_resume, resume) of the device driver that
* holds the devfreq.
*/
-int devfreq_resume_device(struct devfreq *devfreq)
+static int devfreq_resume_device(struct devfreq *devfreq)
{
if (!devfreq)
return -EINVAL;
@@ -581,7 +597,52 @@ int devfreq_resume_device(struct devfreq *devfreq)
return devfreq->governor->event_handler(devfreq,
DEVFREQ_GOV_RESUME, NULL);
}
-EXPORT_SYMBOL(devfreq_resume_device);
+
+/**
+ * devfreq_runtime_suspend() - Suspend devfreq of a device.
+ * @dev: the device associated with devfreq
+ *
+ * This function is intended to be called by the runtime-pm
+ * core when the device associated with devfreq is
+ * runtime suspended.
+ */
+static void devfreq_runtime_suspend(struct device *dev)
+{
+ struct devfreq *devfreq;
+ int err;
+
+ mutex_lock(&devfreq_list_lock);
+ devfreq = find_device_devfreq(dev);
+ mutex_unlock(&devfreq_list_lock);
+
+ err = devfreq_suspend_device(devfreq);
+ if (err)
+ dev_err(dev, "devfreq runtime suspend failed with (%d) error\n",
+ err);
+}
+
+/**
+ * devfreq_runtime_resume() - Resume devfreq of a device.
+ * @dev: the device associated with devfreq
+ *
+ * This function is intended to be called by the runtime-pm
+ * core when the device associated with devfreq is
+ * runtime resumed.
+ */
+static void devfreq_runtime_resume(struct device *dev)
+{
+ struct devfreq *devfreq;
+ int err;
+
+ mutex_lock(&devfreq_list_lock);
+ devfreq = find_device_devfreq(dev);
+ mutex_unlock(&devfreq_list_lock);
+
+ err = devfreq_resume_device(devfreq);
+ if (err)
+ dev_err(dev, "devfreq runtime resume failed with (%d) error\n",
+ err);
+}
/**
* devfreq_add_governor() - Add devfreq governor
diff --git a/include/linux/devfreq.h b/include/linux/devfreq.h
index 5f1ab92..669368b 100644
--- a/include/linux/devfreq.h
+++ b/include/linux/devfreq.h
@@ -140,6 +140,8 @@ struct devfreq_governor {
* @trans_table: Statistics of devfreq transitions
* @time_in_state: Statistics of devfreq states
* @last_stat_updated: The last time stat updated
+ * @runtime_suspend: func to runtime suspend devfreq from runtime core
+ * @runtime_resume: func to runtime resume devfreq from runtime core
*
* This structure stores the devfreq information for a give device.
*
@@ -173,6 +175,8 @@ struct devfreq {
unsigned int *trans_table;
unsigned long *time_in_state;
unsigned long last_stat_updated;
+ void (*runtime_suspend)(struct device *dev);
+ void (*runtime_resume)(struct device *dev);
};
#if defined(CONFIG_PM_DEVFREQ)
@@ -182,10 +186,6 @@ extern struct devfreq *devfreq_add_device(struct device *dev,
void *data);
extern int devfreq_remove_device(struct devfreq *devfreq);
-/* Supposed to be called by PM_SLEEP/PM_RUNTIME callbacks */
-extern int devfreq_suspend_device(struct devfreq *devfreq);
-extern int devfreq_resume_device(struct devfreq *devfreq);
-
/* Helper functions for devfreq user device driver with OPP. */
extern struct opp *devfreq_recommended_opp(struct device *dev,
unsigned long *freq, u32 flags);
@@ -228,16 +228,6 @@ static inline int devfreq_remove_device(struct devfreq *devfreq)
return 0;
}
-static inline int devfreq_suspend_device(struct devfreq *devfreq)
-{
- return 0;
-}
-
-static inline int devfreq_resume_device(struct devfreq *devfreq)
-{
- return 0;
-}
-
static inline struct opp *devfreq_recommended_opp(struct device *dev,
unsigned long *freq, u32 flags)
{
diff --git a/include/linux/pm.h b/include/linux/pm.h
index 03d7bb1..734449c 100644
--- a/include/linux/pm.h
+++ b/include/linux/pm.h
@@ -40,6 +40,7 @@ extern void (*pm_power_off_prepare)(void);
*/
struct device;
+struct devfreq;
#ifdef CONFIG_PM
extern const char power_group_name[]; /* = "power" */
@@ -549,6 +550,7 @@ struct dev_pm_info {
#endif
struct pm_subsys_data *subsys_data; /* Owned by the subsystem. */
struct dev_pm_qos *qos;
+ struct devfreq *devfreq; /* device devfreq */
};
extern void update_pm_runtime_accounting(struct device *dev);
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists