linux-kernel - Re: No serial since kernel 3.8

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <1973551.DT5YstaY8S@vostro.rjw.lan>
Date:	Wed, 17 Apr 2013 20:55:04 +0200
From:	"Rafael J. Wysocki" <rjw@...k.pl>
To:	Bjorn Helgaas <bhelgaas@...gle.com>,
	Stephan von Krawczynski <skraw@...net.com>
Cc:	Josh Boyer <jwboyer@...il.com>,
	richard -rw- weinberger <richard.weinberger@...il.com>,
	LKML <linux-kernel@...r.kernel.org>,
	Greg KH <gregkh@...uxfoundation.org>,
	"linux-acpi@...r.kernel.org" <linux-acpi@...r.kernel.org>
Subject: Re: No serial since kernel 3.8

On Wednesday, April 17, 2013 11:38:30 AM Bjorn Helgaas wrote:
> [+cc Rafael & linux-acpi]

Thanks.

> On Tue, Apr 16, 2013 at 10:14 AM, Stephan von Krawczynski
> <skraw@...net.com> wrote:
> > On Tue, 16 Apr 2013 10:59:53 -0400
> > Josh Boyer <jwboyer@...il.com> wrote:
> >
> >> On Tue, Apr 16, 2013 at 04:55:25PM +0200, richard -rw- weinberger wrote:
> >> >On Tue, Apr 16, 2013 at 4:20 PM, Stephan von Krawczynski
> >> ><skraw@...net.com> wrote:
> >> >> Hello,
> >> >>
> >> >> can some kind soul please explain how I can get my serial port back under
> >> >> kernel 3.8.X. Earlier kernels showed:
> >> >>
> >> >> Jan 10 13:57:18 mybox kernel: [    0.712829] serial8250: ttyS0 at I/O 0x3f8
> >> >> (irq = 4) is a 16550A
> >> >>
> >> >> But 3.8.4:
> >> >>
> >> >> Mar 26 10:39:14 admin kernel: [    0.603647] serial 00:0a: disabled
> >> >>
> >> >> Only kernel is replaced, no change in distro
> >> >> Is there some kernel boot parameter needed now?
> >> >> I tried 3.4.X and it works, even 3.7.X works...
> >> >
> >> >So, 3.8.3 worked and 3.8.4 introduced a regression?
> >> >If so please confirm.
> >> >
> >> >CC'ing gregkh, just in case...
> >>
> >> We had a report of this in Fedora that was fixed with 3.8.7.  An upstream
> >> change had been brought back to the 3.8.x series, and it was subsequently
> >> reverted.  3.8.7 picked up the revert.
> >>
> >> josh
> >
> > 3.8.7 does not work either. I just checked it. I tried shared and not shared IRQ:
> >
> > Apr 16 17:47:05 mybox kernel: [    0.604826] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
> >
> > and another test:
> >
> > Apr 16 18:07:08 mybox kernel: [    0.601203] Serial: 8250/16550 driver, 8 ports, IRQ sharing enabled
> >
> > I must say that 3.8.7 does not even tell the "serial 00:0a: disabled" any more.
> > This is no special board, it is a pretty mainstream asus xeon board with onboard serial.
> > Loading 3.4.24 (just an example) makes the port work immediately.
> > Anything else I can test?
> 
> 3.7.6 works, and 3.8.3, 3.8.4, 3.8.7 all fail.  So it looks like a
> regression between 3.7.6 and 3.8.3.
> 
> The "serial 00:0a: disabled" message is from PNP, so I added Rafael
> and linux-acpi.  Complete dmesg logs from 3.7.6 and 3.8.4 would be a
> place to start.  Also maybe an acpidump, since the 00:0a PNP device
> probably came from PNPACPI.  You could attach all these to a
> https://bugzilla.kernel.org report if you want a place to stash them.
> 
> Josh, do you have a pointer (URL) to the Fedora issue so we can rule
> that in or out?

Stephan, below is a list of commits touching the PNP code between 3.7 and 3.8.

Can you please check if any of them has triggered the problem you're seeing?

Rafael


13cde3b PNP: Handle IORESOURCE_BITS in resource allocation
c937766 PNP: Simplify setting of resources
cdc87c5 pnpacpi: fix incorrect TEST_ALPHA() test
a6b5e88 ACPI / PNP: Do not crash due to stale pointer use during system resume
38de279 pnpbios: remove CONFIG_HOTPLUG ifdefs
2905875 ACPI / PNP: skip ACPI device nodes associated with physical nodes already
046d9ce ACPI: Move device resources interpretation code from PNP to ACPI core

-- 
I speak only for myself.
Rafael J. Wysocki, Intel Open Source Technology Center.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/