| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <ede8ee08bb2616c2ed642200e3357367@localhost>
Date: Thu, 18 Apr 2013 08:49:33 +0200
From: Marc Zyngier <maz@...terjones.org>
To: PranavkumarSawargaonkar <pranavkumar@...aro.org>
Cc: <kvmarm@...ts.cs.columbia.edu>, <linaro-kernel@...ts.linaro.org>,
Anup Patel <anup.patel@...aro.org>, <patches@...aro.org>,
<rusty@...tcorp.com.au>, <linux-kernel@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>
Subject: Re: [RFC] arm64: Early printk support for virtio-mmio console devices.
Hi Pranavkumar,
On Thu, 18 Apr 2013 11:22:24 +0530, PranavkumarSawargaonkar
<pranavkumar@...aro.org> wrote:
> From: Pranavkumar Sawargaonkar <pranavkumar@...aro.org>
>
> This patch implements early printk support for virtio-mmio console
devices
> without using any hypercalls.
>
> The current virtio early printk code in kernel expects that hypervisor
> will provide some mechanism generally a hypercall to support early
printk.
> This patch does not break existing hypercall based early print support.
>
> This implementation adds:
> 1. Early read-write register named early_rw in virtio console's config
> space.
> 2. Two host feature flags namely VIRTIO_CONSOLE_F_EARLY_READ and
> VIRTIO_CONSOLE_F_EARLY_WRITE for telling guest about early-read and
> early-write capability in console device.
>
> Early write mechanism:
> 1. When a guest wants to out some character, it has to simply write the
> character to early_rw register in config space of virtio console device.
>
> Early read mechanism:
> 1. When a guest wants to in some character, it has to simply read the
> early_rw register in config space of virtio console device. Lets say we
get
> 32-bit value X.
> 2. If most significant bit of X is set (i.e. X & 0x80000000 ==
0x80000000)
> then least significant 8 bits of X represents input charaacter else
guest
> need to try again reading early_rw register.
>
> Note: This patch only includes kernel side changes for early printk, the
> host/hypervisor side emulation of early_rw register is out of scope
here.
Well, that's unfortunate, as it makes it quite difficult to understand the
impact of this patch.
Has the virtio side been posted somewhere? I expect you've implemented
something in kvmtool...
> Signed-off-by: Anup Patel <anup.patel@...aro.org>
> ---
> arch/arm64/kernel/early_printk.c | 24 ++++++++++++++++++++++++
> include/uapi/linux/virtio_console.h | 4 ++++
> 2 files changed, 28 insertions(+)
>
> diff --git a/arch/arm64/kernel/early_printk.c
> b/arch/arm64/kernel/early_printk.c
> index ac974f4..a82b5aa 100644
> --- a/arch/arm64/kernel/early_printk.c
> +++ b/arch/arm64/kernel/early_printk.c
> @@ -25,6 +25,9 @@
>
> #include <linux/amba/serial.h>
> #include <linux/serial_reg.h>
> +#include <linux/virtio_ids.h>
> +#include <linux/virtio_mmio.h>
> +#include <linux/virtio_console.h>
>
> static void __iomem *early_base;
> static void (*printch)(char ch);
> @@ -53,6 +56,26 @@ static void smh_printch(char ch)
> }
>
> /*
> + * VIRTIO MMIO based debug console.
> + */
> +static void virtio_console_early_printch(char ch)
> +{
> + u32 tmp;
> + struct virtio_console_config *p = early_base + VIRTIO_MMIO_CONFIG;
> +
> + tmp = readl_relaxed(early_base + VIRTIO_MMIO_DEVICE_ID);
> + if (tmp != VIRTIO_ID_CONSOLE) {
> + return;
> + }
> +
> + tmp = readl_relaxed(early_base + VIRTIO_MMIO_HOST_FEATURES);
> + if (!(tmp & (1 << VIRTIO_CONSOLE_F_EARLY_WRITE))) {
> + return;
> + }
> + writeb_relaxed(ch, &p->early_rw);
So here, you end up trapping 3 times per character being output on the
console. Surely there's a better way. How about remembering the result of
these tests in a static variable?
> +}
> +
> +/*
> * 8250/16550 (8-bit aligned registers) single character TX.
> */
> static void uart8250_8bit_printch(char ch)
> @@ -82,6 +105,7 @@ static const struct earlycon_match earlycon_match[]
> __initconst = {
> { .name = "smh", .printch = smh_printch, },
> { .name = "uart8250-8bit", .printch = uart8250_8bit_printch, },
> { .name = "uart8250-32bit", .printch = uart8250_32bit_printch, },
> + { .name = "virtio-console", .printch = virtio_console_early_printch,
},
> {}
> };
>
> diff --git a/include/uapi/linux/virtio_console.h
> b/include/uapi/linux/virtio_console.h
> index ee13ab6..1171cb4 100644
> --- a/include/uapi/linux/virtio_console.h
> +++ b/include/uapi/linux/virtio_console.h
> @@ -38,6 +38,8 @@
> /* Feature bits */
> #define VIRTIO_CONSOLE_F_SIZE 0 /* Does host provide console size? */
> #define VIRTIO_CONSOLE_F_MULTIPORT 1 /* Does host provide multiple
ports?
> */
> +#define VIRTIO_CONSOLE_F_EARLY_READ 2 /* Does host support early read?
*/
> +#define VIRTIO_CONSOLE_F_EARLY_WRITE 3 /* Does host support early
write?
> */
>
> #define VIRTIO_CONSOLE_BAD_ID (~(u32)0)
>
> @@ -48,6 +50,8 @@ struct virtio_console_config {
> __u16 rows;
> /* max. number of ports this device can hold */
> __u32 max_nr_ports;
> + /* early read/write register */
> + __u32 early_rw;
> } __attribute__((packed));
>
> /*
So that bit is clearly a spec change. How does it work with PCI, or any
other virtio transport?
Overall, I'm a bit concerned with adding features that don't really match
the way virtio is supposed to work. The whole goal of virtio is to minimize
the amount of trapping, and here you end up trapping on each and every
access.
If you need an early console, why not simply wire the 8250 emulation in
kvmtool to be useable from the MMIO bus? I reckon this would solve your
problem in a more elegant way...
Cheers,
M.
--
Who you jivin' with that Cosmik Debris?
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists