[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <20130419181134.06eded8f@e6520eb>
Date: Fri, 19 Apr 2013 18:11:34 +0200
From: Eric Bénard <eric@...rea.com>
To: Fabio Estevam <festevam@...il.com>
Cc: linux-arm-kernel@...ts.infradead.org, shawn.guo@...aro.org,
linux-kernel@...r.kernel.org, kernel@...gutronix.de
Subject: Re: [PATCH] ARM: mx28: add dma channels for all auarts
Hi Fabio,
Le Fri, 19 Apr 2013 12:26:33 -0300,
Fabio Estevam <festevam@...il.com> a écrit :
> On Fri, Apr 19, 2013 at 12:05 PM, Eric Bénard <eric@...rea.com> wrote:
> > Only auart0 was filled.
> > Tested on a custom i.MX283 board for ttyAPP1/2/3/4.
> >
> > Signed-off-by: Eric Bénard <eric@...rea.com>
> > ---
> > arch/arm/boot/dts/imx28.dtsi | 4 ++++
> > 1 file changed, 4 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
> > index 25f2243..15933ed 100644
> > --- a/arch/arm/boot/dts/imx28.dtsi
> > +++ b/arch/arm/boot/dts/imx28.dtsi
> > @@ -886,6 +886,7 @@
> > compatible = "fsl,imx28-auart", "fsl,imx23-auart";
> > reg = <0x8006c000 0x2000>;
> > interrupts = <113 72 73>;
> > + fsl,auart-dma-channel = <10 11>;
>
> Now we use the generic 'dmas' binding to passing such information.
>
> If you look at linux-next tree these UART dma channels are already
> been passed via the new 'dmas' method:
>
> auart1: serial@...6c000 {
> compatible = "fsl,imx28-auart", "fsl,imx23-auart";
> reg = <0x8006c000 0x2000>;
> interrupts = <113 72 73>;
> dmas = <&dma_apbx 10>, <&dma_apbx 11>;
> dma-names = "rx", "tx";
> clocks = <&clks 45>;
> status = "disabled";
> };
OK so forget my patch it was against 3.9-rc
Eric
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists