Message-Id: <1366813919-13766-2-git-send-email-alexandre.bounine@idt.com>
Date:	Wed, 24 Apr 2013 10:31:57 -0400
From:	Alexandre Bounine <alexandre.bounine@....com>
To:	Andrew Morton <akpm@...ux-foundation.org>,
	linux-kernel@...r.kernel.org, linuxppc-dev@...ts.ozlabs.org
Cc:	Alexandre Bounine <alexandre.bounine@....com>,
	Matt Porter <mporter@...nel.crashing.org>,
	Li Yang <leoli@...escale.com>,
	Kumar Gala <galak@...nel.crashing.org>,
	Andre van Herk <andre.van.herk@...drive.nl>,
	Micha Nelissen <micha.nelissen@...drive.nl>
Subject: [PATCH 1/3] rapidio: make enumeration/discovery configurable

Rework to implement RapidIO enumeration/discovery method selection
combined with ability to use enumeration/discovery as a kernel module.

This patch adds ability to introduce new RapidIO enumeration/discovery methods
using kernel configuration options or loadable modules. Configuration option
mechanism allows to select built-in or modular enumeration/discovery method from
the list of existing methods or use external modules.
If a modular enumeration/discovery is selected each RapidIO mport device can
have its own method attached to it.

The currently existing enumeration/discovery code was updated to be used
as built-in or modular method. This configuration option is named "Basic
enumeration/discovery" method.

Several common routines have been moved from rio-scan.c to make them available
to other enumeration methods and reduce number of exported symbols.

Signed-off-by: Alexandre Bounine <alexandre.bounine@....com>
Cc: Matt Porter <mporter@...nel.crashing.org>
Cc: Li Yang <leoli@...escale.com>
Cc: Kumar Gala <galak@...nel.crashing.org>
Cc: Andre van Herk <andre.van.herk@...drive.nl>
Cc: Micha Nelissen <micha.nelissen@...drive.nl>
---
 drivers/rapidio/Kconfig      |   19 ++++
 drivers/rapidio/Makefile     |    3 +-
 drivers/rapidio/rio-driver.c |    7 ++
 drivers/rapidio/rio-scan.c   |  171 +++++++++-------------------------
 drivers/rapidio/rio.c        |  212 +++++++++++++++++++++++++++++++++++++++++-
 drivers/rapidio/rio.h        |   10 ++-
 include/linux/rio.h          |   12 +++
 include/linux/rio_drv.h      |    1 +
 8 files changed, 300 insertions(+), 135 deletions(-)

diff --git a/drivers/rapidio/Kconfig b/drivers/rapidio/Kconfig
index 6194d35..e392cab 100644
--- a/drivers/rapidio/Kconfig
+++ b/drivers/rapidio/Kconfig
@@ -47,4 +47,23 @@ config RAPIDIO_DEBUG
 
 	  If you are unsure about this, say N here.
 
+choice
+	prompt "Enumeration method"
+	depends on RAPIDIO
+	help
+	  There are different enumeration and discovery mechanisms offered
+	  for RapidIO subsystem. You may select single built-in method or
+	  or any number of methods to be built as modules.
+	  Selecting a built-in method disables use of loadable methods.
+
+	  If unsure, select Basic built-in.
+
+config RAPIDIO_ENUM_BASIC
+	tristate "Basic"
+	help
+	  This option includes basic RapidIO fabric enumeration and discovery
+	  mechanism similar to one described in RapidIO specification Annex 1.
+
+endchoice
+
 source "drivers/rapidio/switches/Kconfig"
diff --git a/drivers/rapidio/Makefile b/drivers/rapidio/Makefile
index ec3fb81..3036702 100644
--- a/drivers/rapidio/Makefile
+++ b/drivers/rapidio/Makefile
@@ -1,7 +1,8 @@
 #
 # Makefile for RapidIO interconnect services
 #
-obj-y += rio.o rio-access.o rio-driver.o rio-scan.o rio-sysfs.o
+obj-y += rio.o rio-access.o rio-driver.o rio-sysfs.o
+obj-$(CONFIG_RAPIDIO_ENUM_BASIC) += rio-scan.o
 
 obj-$(CONFIG_RAPIDIO)		+= switches/
 obj-$(CONFIG_RAPIDIO)		+= devices/
diff --git a/drivers/rapidio/rio-driver.c b/drivers/rapidio/rio-driver.c
index 0f4a53b..55850bb 100644
--- a/drivers/rapidio/rio-driver.c
+++ b/drivers/rapidio/rio-driver.c
@@ -164,6 +164,13 @@ void rio_unregister_driver(struct rio_driver *rdrv)
 	driver_unregister(&rdrv->driver);
 }
 
+void rio_attach_device(struct rio_dev *rdev)
+{
+	rdev->dev.bus = &rio_bus_type;
+	rdev->dev.parent = &rio_bus;
+}
+EXPORT_SYMBOL_GPL(rio_attach_device);
+
 /**
  *  rio_match_bus - Tell if a RIO device structure has a matching RIO driver device id structure
  *  @dev: the standard device structure to match against
diff --git a/drivers/rapidio/rio-scan.c b/drivers/rapidio/rio-scan.c
index a965acd..33fc332 100644
--- a/drivers/rapidio/rio-scan.c
+++ b/drivers/rapidio/rio-scan.c
@@ -37,12 +37,8 @@
 
 #include "rio.h"
 
-LIST_HEAD(rio_devices);
-
 static void rio_init_em(struct rio_dev *rdev);
 
-DEFINE_SPINLOCK(rio_global_list_lock);
-
 static int next_destid = 0;
 static int next_comptag = 1;
 
@@ -327,127 +323,6 @@ static int rio_is_switch(struct rio_dev *rdev)
 }
 
 /**
- * rio_switch_init - Sets switch operations for a particular vendor switch
- * @rdev: RIO device
- * @do_enum: Enumeration/Discovery mode flag
- *
- * Searches the RIO switch ops table for known switch types. If the vid
- * and did match a switch table entry, then call switch initialization
- * routine to setup switch-specific routines.
- */
-static void rio_switch_init(struct rio_dev *rdev, int do_enum)
-{
-	struct rio_switch_ops *cur = __start_rio_switch_ops;
-	struct rio_switch_ops *end = __end_rio_switch_ops;
-
-	while (cur < end) {
-		if ((cur->vid == rdev->vid) && (cur->did == rdev->did)) {
-			pr_debug("RIO: calling init routine for %s\n",
-				 rio_name(rdev));
-			cur->init_hook(rdev, do_enum);
-			break;
-		}
-		cur++;
-	}
-
-	if ((cur >= end) && (rdev->pef & RIO_PEF_STD_RT)) {
-		pr_debug("RIO: adding STD routing ops for %s\n",
-			rio_name(rdev));
-		rdev->rswitch->add_entry = rio_std_route_add_entry;
-		rdev->rswitch->get_entry = rio_std_route_get_entry;
-		rdev->rswitch->clr_table = rio_std_route_clr_table;
-	}
-
-	if (!rdev->rswitch->add_entry || !rdev->rswitch->get_entry)
-		printk(KERN_ERR "RIO: missing routing ops for %s\n",
-		       rio_name(rdev));
-}
-
-/**
- * rio_add_device- Adds a RIO device to the device model
- * @rdev: RIO device
- *
- * Adds the RIO device to the global device list and adds the RIO
- * device to the RIO device list.  Creates the generic sysfs nodes
- * for an RIO device.
- */
-static int rio_add_device(struct rio_dev *rdev)
-{
-	int err;
-
-	err = device_add(&rdev->dev);
-	if (err)
-		return err;
-
-	spin_lock(&rio_global_list_lock);
-	list_add_tail(&rdev->global_list, &rio_devices);
-	spin_unlock(&rio_global_list_lock);
-
-	rio_create_sysfs_dev_files(rdev);
-
-	return 0;
-}
-
-/**
- * rio_enable_rx_tx_port - enable input receiver and output transmitter of
- * given port
- * @port: Master port associated with the RIO network
- * @local: local=1 select local port otherwise a far device is reached
- * @destid: Destination ID of the device to check host bit
- * @hopcount: Number of hops to reach the target
- * @port_num: Port (-number on switch) to enable on a far end device
- *
- * Returns 0 or 1 from on General Control Command and Status Register
- * (EXT_PTR+0x3C)
- */
-inline int rio_enable_rx_tx_port(struct rio_mport *port,
-				 int local, u16 destid,
-				 u8 hopcount, u8 port_num) {
-#ifdef CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS
-	u32 regval;
-	u32 ext_ftr_ptr;
-
-	/*
-	* enable rx input tx output port
-	*/
-	pr_debug("rio_enable_rx_tx_port(local = %d, destid = %d, hopcount = "
-		 "%d, port_num = %d)\n", local, destid, hopcount, port_num);
-
-	ext_ftr_ptr = rio_mport_get_physefb(port, local, destid, hopcount);
-
-	if (local) {
-		rio_local_read_config_32(port, ext_ftr_ptr +
-				RIO_PORT_N_CTL_CSR(0),
-				&regval);
-	} else {
-		if (rio_mport_read_config_32(port, destid, hopcount,
-		ext_ftr_ptr + RIO_PORT_N_CTL_CSR(port_num), &regval) < 0)
-			return -EIO;
-	}
-
-	if (regval & RIO_PORT_N_CTL_P_TYP_SER) {
-		/* serial */
-		regval = regval | RIO_PORT_N_CTL_EN_RX_SER
-				| RIO_PORT_N_CTL_EN_TX_SER;
-	} else {
-		/* parallel */
-		regval = regval | RIO_PORT_N_CTL_EN_RX_PAR
-				| RIO_PORT_N_CTL_EN_TX_PAR;
-	}
-
-	if (local) {
-		rio_local_write_config_32(port, ext_ftr_ptr +
-					  RIO_PORT_N_CTL_CSR(0), regval);
-	} else {
-		if (rio_mport_write_config_32(port, destid, hopcount,
-		    ext_ftr_ptr + RIO_PORT_N_CTL_CSR(port_num), regval) < 0)
-			return -EIO;
-	}
-#endif
-	return 0;
-}
-
-/**
  * rio_setup_device- Allocates and sets up a RIO device
  * @net: RIO network
  * @port: Master port to send transactions
@@ -587,8 +462,7 @@ static struct rio_dev *rio_setup_device(struct rio_net *net,
 			     rdev->destid);
 	}
 
-	rdev->dev.bus = &rio_bus_type;
-	rdev->dev.parent = &rio_bus;
+	rio_attach_device(rdev);
 
 	device_initialize(&rdev->dev);
 	rdev->dev.release = rio_release_dev;
@@ -1421,3 +1295,46 @@ enum_done:
 bail:
 	return -EBUSY;
 }
+
+struct rio_scan rio_scan_ops = {
+	.enumerate = rio_enum_mport,
+	.discover = rio_disc_mport,
+};
+
+
+#ifdef MODULE
+
+static bool scan;
+module_param(scan, bool, 0);
+MODULE_PARM_DESC(scan, "Start RapidIO network enumeration/discovery "
+			"(default = 1)");
+
+/**
+ * rio_basic_attach:
+ *
+ * When this enumeration/discovery method is loaded as a module this function
+ * registers its specific enumeration and discover routines for all available
+ * RapidIO mport devices. The "scan" command line parameter controls ability of
+ * the module to start RapidIO enumeration/discovery automatically.
+ *
+ * Returns 0 for success or -EIO if unable to register itself.
+ *
+ * This enumeration/discovery method cannot be unloaded and therefore does not
+ * provide a matching cleanup_module routine.
+ */
+
+int __init rio_basic_attach(void)
+{
+	if (rio_register_scan(RIO_MPORT_ANY, &rio_scan_ops))
+		return -EIO;
+	if (scan)
+		rio_init_mports();
+	return 0;
+}
+
+module_init(rio_basic_attach);
+
+MODULE_DESCRIPTION("Basic RapidIO enumeration/discovery");
+MODULE_LICENSE("GPL");
+
+#endif /* MODULE */
diff --git a/drivers/rapidio/rio.c b/drivers/rapidio/rio.c
index d553b5d..e36628a 100644
--- a/drivers/rapidio/rio.c
+++ b/drivers/rapidio/rio.c
@@ -31,6 +31,9 @@
 
 #include "rio.h"
 
+LIST_HEAD(rio_devices);
+DEFINE_SPINLOCK(rio_global_list_lock);
+
 static LIST_HEAD(rio_mports);
 static unsigned char next_portid;
 static DEFINE_SPINLOCK(rio_mmap_lock);
@@ -53,6 +56,32 @@ u16 rio_local_get_device_id(struct rio_mport *port)
 }
 
 /**
+ * rio_add_device- Adds a RIO device to the device model
+ * @rdev: RIO device
+ *
+ * Adds the RIO device to the global device list and adds the RIO
+ * device to the RIO device list.  Creates the generic sysfs nodes
+ * for an RIO device.
+ */
+int rio_add_device(struct rio_dev *rdev)
+{
+	int err;
+
+	err = device_add(&rdev->dev);
+	if (err)
+		return err;
+
+	spin_lock(&rio_global_list_lock);
+	list_add_tail(&rdev->global_list, &rio_devices);
+	spin_unlock(&rio_global_list_lock);
+
+	rio_create_sysfs_dev_files(rdev);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(rio_add_device);
+
+/**
  * rio_request_inb_mbox - request inbound mailbox service
  * @mport: RIO master port from which to allocate the mailbox resource
  * @dev_id: Device specific pointer to pass on event
@@ -489,6 +518,7 @@ rio_mport_get_physefb(struct rio_mport *port, int local,
 
 	return ext_ftr_ptr;
 }
+EXPORT_SYMBOL_GPL(rio_mport_get_physefb);
 
 /**
  * rio_get_comptag - Begin or continue searching for a RIO device by component tag
@@ -521,6 +551,7 @@ exit:
 	spin_unlock(&rio_global_list_lock);
 	return rdev;
 }
+EXPORT_SYMBOL_GPL(rio_get_comptag);
 
 /**
  * rio_set_port_lockout - Sets/clears LOCKOUT bit (RIO EM 1.3) for a switch port.
@@ -545,6 +576,107 @@ int rio_set_port_lockout(struct rio_dev *rdev, u32 pnum, int lock)
 				  regval);
 	return 0;
 }
+EXPORT_SYMBOL_GPL(rio_set_port_lockout);
+
+/**
+ * rio_switch_init - Sets switch operations for a particular vendor switch
+ * @rdev: RIO device
+ * @do_enum: Enumeration/Discovery mode flag
+ *
+ * Searches the RIO switch ops table for known switch types. If the vid
+ * and did match a switch table entry, then call switch initialization
+ * routine to setup switch-specific routines.
+ */
+void rio_switch_init(struct rio_dev *rdev, int do_enum)
+{
+	struct rio_switch_ops *cur = __start_rio_switch_ops;
+	struct rio_switch_ops *end = __end_rio_switch_ops;
+
+	while (cur < end) {
+		if ((cur->vid == rdev->vid) && (cur->did == rdev->did)) {
+			pr_debug("RIO: calling init routine for %s\n",
+				 rio_name(rdev));
+			cur->init_hook(rdev, do_enum);
+			break;
+		}
+		cur++;
+	}
+
+	if ((cur >= end) && (rdev->pef & RIO_PEF_STD_RT)) {
+		pr_debug("RIO: adding STD routing ops for %s\n",
+			rio_name(rdev));
+		rdev->rswitch->add_entry = rio_std_route_add_entry;
+		rdev->rswitch->get_entry = rio_std_route_get_entry;
+		rdev->rswitch->clr_table = rio_std_route_clr_table;
+	}
+
+	if (!rdev->rswitch->add_entry || !rdev->rswitch->get_entry)
+		printk(KERN_ERR "RIO: missing routing ops for %s\n",
+		       rio_name(rdev));
+}
+EXPORT_SYMBOL_GPL(rio_switch_init);
+
+/**
+ * rio_enable_rx_tx_port - enable input receiver and output transmitter of
+ * given port
+ * @port: Master port associated with the RIO network
+ * @local: local=1 select local port otherwise a far device is reached
+ * @destid: Destination ID of the device to check host bit
+ * @hopcount: Number of hops to reach the target
+ * @port_num: Port (-number on switch) to enable on a far end device
+ *
+ * Returns 0 or 1 from on General Control Command and Status Register
+ * (EXT_PTR+0x3C)
+ */
+int rio_enable_rx_tx_port(struct rio_mport *port,
+			  int local, u16 destid,
+			  u8 hopcount, u8 port_num)
+{
+#ifdef CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS
+	u32 regval;
+	u32 ext_ftr_ptr;
+
+	/*
+	* enable rx input tx output port
+	*/
+	pr_debug("rio_enable_rx_tx_port(local = %d, destid = %d, hopcount = "
+		 "%d, port_num = %d)\n", local, destid, hopcount, port_num);
+
+	ext_ftr_ptr = rio_mport_get_physefb(port, local, destid, hopcount);
+
+	if (local) {
+		rio_local_read_config_32(port, ext_ftr_ptr +
+				RIO_PORT_N_CTL_CSR(0),
+				&regval);
+	} else {
+		if (rio_mport_read_config_32(port, destid, hopcount,
+		ext_ftr_ptr + RIO_PORT_N_CTL_CSR(port_num), &regval) < 0)
+			return -EIO;
+	}
+
+	if (regval & RIO_PORT_N_CTL_P_TYP_SER) {
+		/* serial */
+		regval = regval | RIO_PORT_N_CTL_EN_RX_SER
+				| RIO_PORT_N_CTL_EN_TX_SER;
+	} else {
+		/* parallel */
+		regval = regval | RIO_PORT_N_CTL_EN_RX_PAR
+				| RIO_PORT_N_CTL_EN_TX_PAR;
+	}
+
+	if (local) {
+		rio_local_write_config_32(port, ext_ftr_ptr +
+					  RIO_PORT_N_CTL_CSR(0), regval);
+	} else {
+		if (rio_mport_write_config_32(port, destid, hopcount,
+		    ext_ftr_ptr + RIO_PORT_N_CTL_CSR(port_num), regval) < 0)
+			return -EIO;
+	}
+#endif
+	return 0;
+}
+EXPORT_SYMBOL_GPL(rio_enable_rx_tx_port);
+
 
 /**
  * rio_chk_dev_route - Validate route to the specified device.
@@ -610,6 +742,7 @@ rio_mport_chk_dev_access(struct rio_mport *mport, u16 destid, u8 hopcount)
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(rio_mport_chk_dev_access);
 
 /**
  * rio_chk_dev_access - Validate access to the specified device.
@@ -941,6 +1074,7 @@ rio_mport_get_efb(struct rio_mport *port, int local, u16 destid,
 		return RIO_GET_BLOCK_ID(reg_val);
 	}
 }
+EXPORT_SYMBOL_GPL(rio_mport_get_efb);
 
 /**
  * rio_mport_get_feature - query for devices' extended features
@@ -997,6 +1131,7 @@ rio_mport_get_feature(struct rio_mport * port, int local, u16 destid,
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(rio_mport_get_feature);
 
 /**
  * rio_get_asm - Begin or continue searching for a RIO device by vid/did/asm_vid/asm_did
@@ -1246,6 +1381,67 @@ EXPORT_SYMBOL_GPL(rio_dma_prep_slave_sg);
 
 #endif /* CONFIG_RAPIDIO_DMA_ENGINE */
 
+/**
+ * rio_register_scan - enumeration/discovery method registration interface
+ * @mport_id: mport device ID for which fabric scan routine has to be set
+ *            (RIO_MPORT_ANY = set for all available mports)
+ * @scan_ops: enumeration/discovery control structure
+ *
+ * Assigns enumeration or discovery method to the specified mport device (or all
+ * available mports if RIO_MPORT_ANY is specified).
+ * Returns error if the mport already has an enumerator attached to it.
+ * In case of RIO_MPORT_ANY ignores ports with valid scan routines and returns
+ * an error if was unable to find at least one available mport.
+ */
+int rio_register_scan(int mport_id, struct rio_scan *scan_ops)
+{
+	struct rio_mport *port;
+	int rc = -EBUSY;
+
+	list_for_each_entry(port, &rio_mports, node) {
+		if (port->id == mport_id || mport_id == RIO_MPORT_ANY) {
+			if (port->nscan && mport_id == RIO_MPORT_ANY)
+				continue;
+			else if (port->nscan)
+				break;
+
+			port->nscan = scan_ops;
+			rc = 0;
+
+			if (mport_id != RIO_MPORT_ANY)
+				break;
+		}
+	}
+
+	return rc;
+}
+EXPORT_SYMBOL_GPL(rio_register_scan);
+
+/**
+ * rio_unregister_scan - removes enumeration/discovery method from mport
+ * @mport_id: mport device ID for which fabric scan routine has to be
+ *            unregistered (RIO_MPORT_ANY = set for all available mports)
+ *
+ * Removes enumeration or discovery method assigned to the specified mport
+ * device (or all available mports if RIO_MPORT_ANY is specified).
+ */
+int rio_unregister_scan(int mport_id)
+{
+	struct rio_mport *port;
+
+	list_for_each_entry(port, &rio_mports, node) {
+		if (port->id == mport_id || mport_id == RIO_MPORT_ANY) {
+			if (port->nscan)
+				port->nscan = NULL;
+			if (mport_id != RIO_MPORT_ANY)
+				break;
+		}
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(rio_unregister_scan);
+
 static void rio_fixup_device(struct rio_dev *dev)
 {
 }
@@ -1274,7 +1470,7 @@ static void disc_work_handler(struct work_struct *_work)
 	work = container_of(_work, struct rio_disc_work, work);
 	pr_debug("RIO: discovery work for mport %d %s\n",
 		 work->mport->id, work->mport->name);
-	rio_disc_mport(work->mport);
+	work->mport->nscan->discover(work->mport);
 }
 
 int rio_init_mports(void)
@@ -1291,9 +1487,10 @@ int rio_init_mports(void)
 	 * on any of the registered mports.
 	 */
 	list_for_each_entry(port, &rio_mports, node) {
-		if (port->host_deviceid >= 0)
-			rio_enum_mport(port);
-		else
+		if (port->host_deviceid >= 0) {
+			if (port->nscan)
+				port->nscan->enumerate(port);
+		} else
 			n++;
 	}
 
@@ -1323,7 +1520,7 @@ int rio_init_mports(void)
 
 	n = 0;
 	list_for_each_entry(port, &rio_mports, node) {
-		if (port->host_deviceid < 0) {
+		if (port->host_deviceid < 0 && port->nscan) {
 			work[n].mport = port;
 			INIT_WORK(&work[n].work, disc_work_handler);
 			queue_work(rio_wq, &work[n].work);
@@ -1362,6 +1559,9 @@ static int rio_hdid_setup(char *str)
 
 __setup("riohdid=", rio_hdid_setup);
 
+/* Enumerator structure that links built-in enumerator */
+extern struct rio_scan __weak rio_scan_ops;
+
 int rio_register_mport(struct rio_mport *port)
 {
 	if (next_portid >= RIO_MAX_MPORTS) {
@@ -1371,6 +1571,7 @@ int rio_register_mport(struct rio_mport *port)
 
 	port->id = next_portid++;
 	port->host_deviceid = rio_get_hdid(port->id);
+	port->nscan = &rio_scan_ops;
 	list_add_tail(&port->node, &rio_mports);
 	return 0;
 }
@@ -1386,3 +1587,4 @@ EXPORT_SYMBOL_GPL(rio_request_inb_mbox);
 EXPORT_SYMBOL_GPL(rio_release_inb_mbox);
 EXPORT_SYMBOL_GPL(rio_request_outb_mbox);
 EXPORT_SYMBOL_GPL(rio_release_outb_mbox);
+EXPORT_SYMBOL_GPL(rio_init_mports);
diff --git a/drivers/rapidio/rio.h b/drivers/rapidio/rio.h
index b1af414..d44e7e6 100644
--- a/drivers/rapidio/rio.h
+++ b/drivers/rapidio/rio.h
@@ -15,6 +15,7 @@
 #include <linux/rio.h>
 
 #define RIO_MAX_CHK_RETRY	3
+#define RIO_MPORT_ANY		(-1)
 
 /* Functions internal to the RIO core code */
 
@@ -27,8 +28,6 @@ extern u32 rio_mport_get_efb(struct rio_mport *port, int local, u16 destid,
 extern int rio_mport_chk_dev_access(struct rio_mport *mport, u16 destid,
 				    u8 hopcount);
 extern int rio_create_sysfs_dev_files(struct rio_dev *rdev);
-extern int rio_enum_mport(struct rio_mport *mport);
-extern int rio_disc_mport(struct rio_mport *mport);
 extern int rio_std_route_add_entry(struct rio_mport *mport, u16 destid,
 				   u8 hopcount, u16 table, u16 route_destid,
 				   u8 route_port);
@@ -39,6 +38,13 @@ extern int rio_std_route_clr_table(struct rio_mport *mport, u16 destid,
 				   u8 hopcount, u16 table);
 extern int rio_set_port_lockout(struct rio_dev *rdev, u32 pnum, int lock);
 extern struct rio_dev *rio_get_comptag(u32 comp_tag, struct rio_dev *from);
+extern int rio_add_device(struct rio_dev *rdev);
+extern void rio_switch_init(struct rio_dev *rdev, int do_enum);
+extern int rio_enable_rx_tx_port(struct rio_mport *port, int local, u16 destid,
+				 u8 hopcount, u8 port_num);
+extern int rio_register_scan(int mport_id, struct rio_scan *scan_ops);
+extern int rio_unregister_scan(int mport_id);
+extern void rio_attach_device(struct rio_dev *rdev);
 
 /* Structures internal to the RIO core code */
 extern struct device_attribute rio_dev_attrs[];
diff --git a/include/linux/rio.h b/include/linux/rio.h
index a3e7842..30a48a8 100644
--- a/include/linux/rio.h
+++ b/include/linux/rio.h
@@ -237,6 +237,7 @@ enum rio_phy_type {
  * @name: Port name string
  * @priv: Master port private data
  * @dma: DMA device associated with mport
+ * @nscan: RapidIO network enumeration/discovery operations
  */
 struct rio_mport {
 	struct list_head dbells;	/* list of doorbell events */
@@ -262,6 +263,7 @@ struct rio_mport {
 #ifdef CONFIG_RAPIDIO_DMA_ENGINE
 	struct dma_device	dma;
 #endif
+	struct rio_scan *nscan;
 };
 
 struct rio_id_table {
@@ -460,6 +462,16 @@ static inline struct rio_mport *dma_to_mport(struct dma_device *ddev)
 }
 #endif /* CONFIG_RAPIDIO_DMA_ENGINE */
 
+/**
+ * struct rio_scan - RIO enumeration and discovery operations
+ * @enumerate: Callback to perform RapidIO fabric enumeration.
+ * @discover: Callback to perform RapidIO fabric discovery.
+ */
+struct rio_scan {
+	int (*enumerate)(struct rio_mport *mport);
+	int (*discover)(struct rio_mport *mport);
+};
+
 /* Architecture and hardware-specific functions */
 extern int rio_register_mport(struct rio_mport *);
 extern int rio_open_inb_mbox(struct rio_mport *, void *, int, int);
diff --git a/include/linux/rio_drv.h b/include/linux/rio_drv.h
index b75c059..5059994 100644
--- a/include/linux/rio_drv.h
+++ b/include/linux/rio_drv.h
@@ -433,5 +433,6 @@ extern u16 rio_local_get_device_id(struct rio_mport *port);
 extern struct rio_dev *rio_get_device(u16 vid, u16 did, struct rio_dev *from);
 extern struct rio_dev *rio_get_asm(u16 vid, u16 did, u16 asm_vid, u16 asm_did,
 				   struct rio_dev *from);
+extern int rio_init_mports(void);
 
 #endif				/* LINUX_RIO_DRV_H */
-- 
1.7.8.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists