Message-ID: <18474523.4Ny9IacvUQ@sifl>
Date:	Wed, 24 Apr 2013 14:51:09 -0400
From:	Paul Moore <paul@...l-moore.com>
To:	Casey Schaufler <casey@...aufler-ca.com>
Cc:	LSM <linux-security-module@...r.kernel.org>,
	LKLM <linux-kernel@...r.kernel.org>,
	SE Linux <selinux@...ho.nsa.gov>,
	James Morris <jmorris@...ei.org>,
	John Johansen <john.johansen@...onical.com>,
	Eric Paris <eparis@...hat.com>,
	Tetsuo Handa <penguin-kernel@...ove.sakura.ne.jp>,
	Kees Cook <keescook@...omium.org>
Subject: Re: [PATCH v13 5/9] LSM: Networking component isolation

On Tuesday, April 23, 2013 09:04:31 AM Casey Schaufler wrote:
> Subject: [PATCH v13 5/9] LSM: Networking component isolation
> 
> The NetLabel, XFRM and secmark networking mechanisms are
> limited to providing security information managed by one
> LSM. These changes interface the single LSM networking
> components with the multiple LSM system. Each of the
> networking components will identify the security ops
> vector of the LSM that will use it. There are various
> wrapper functions provided to make this obvious and
> painless.
> 
> Signed-off-by: Casey Schaufler <casey@...aufler-ca.com>

...

> diff --git a/include/net/netlabel.h b/include/net/netlabel.h
> index 2c95d55..c0cf965 100644
> --- a/include/net/netlabel.h
> +++ b/include/net/netlabel.h
> @@ -406,7 +406,8 @@ int netlbl_secattr_catmap_setrng(struct
> netlbl_lsm_secattr_catmap *catmap, /*
>   * LSM protocol operations (NetLabel LSM/kernel API)
>   */
> -int netlbl_enabled(void);
> +int netlbl_register_lsm(struct security_operations *lsmops);

Nit picky, but I'd prefer "netlbl_lsm_register()".

> +int netlbl_enabled(struct security_operations *lsmops);
>  int netlbl_sock_setattr(struct sock *sk,
>  			u16 family,
>  			const struct netlbl_lsm_secattr *secattr);

...

> diff --git a/net/netlabel/netlabel_kapi.c b/net/netlabel/netlabel_kapi.c
> index 7c94aed..2881d48 100644
> --- a/net/netlabel/netlabel_kapi.c
> +++ b/net/netlabel/netlabel_kapi.c
> @@ -607,23 +607,48 @@ int netlbl_secattr_catmap_setrng(struct
> netlbl_lsm_secattr_catmap *catmap, * LSM Functions
>   */
> 
> +struct security_operations *netlbl_active_lsm;
> +/**
> + * netlbl_register_lsm - Reserve the NetLabel subsystem for an LSM
> + *
> + * Description:
> + * To avoid potential conflicting views between LSMs over
> + * what should go in the network label reserve the Netlabel
> + * mechanism for use by one LSM. netlbl_enabled will return
> + * false for all other LSMs.
> + *
> + */

You need a description for the 'lsm' parameter in the comment header above.

Also, this is extremely nit picky but I'd like to see some vertical whitespace 
between the netlbl_active_lsm declaration and the function header.

> +int netlbl_register_lsm(struct security_operations *lsm)
> +{
> +	if (lsm == NULL)
> +		return -EINVAL;
> +
> +	if (netlbl_active_lsm == NULL)
> +		netlbl_active_lsm = lsm;
> +	else if (netlbl_active_lsm != lsm)
> +		return -EBUSY;
> +
> +	printk(KERN_INFO "NetLabel: Registered LSM \"%s\".\n", lsm->name);
> +	return 0;
> +}
> +
>  /**
>   * netlbl_enabled - Determine if the NetLabel subsystem is enabled
>   *
>   * Description:
>   * The LSM can use this function to determine if it should use NetLabel
> - * security attributes in it's enforcement mechanism.  Currently, NetLabel
> - * considered to be enabled when it's configuration contains a valid
> + * security attributes in it's enforcement mechanism.  NetLabel
> + * considered to be enabled when the LSM making the call is registered
> + * the netlabel configuration contains a valid setup for
>   * at least one labeled protocol (i.e. NetLabel can understand incoming
>   * labeled packets of at least one type); otherwise NetLabel is considered
>   * be disabled.
>   *
>   */

Same thing, you need a description for the 'lsm' parameter in the comment 
header above.

> -int netlbl_enabled(void)
> +int netlbl_enabled(struct security_operations *lsm)
>  {
> -	/* At some point we probably want to expose this mechanism to the user
> -	 * as well so that admins can toggle NetLabel regardless of the
> -	 * configuration */

It really doesn't matter if you remove that comment or not, but I believe it 
still applies so long as we do the LSM check first.

> +	if (netlbl_active_lsm != lsm)
> +		return 0;
>  	return (atomic_read(&netlabel_mgmt_protocount) > 0);
>  }

...

> diff --git a/net/netlabel/netlabel_user.h b/net/netlabel/netlabel_user.h
> index a6f1705..9990b24 100644
> --- a/net/netlabel/netlabel_user.h
> +++ b/net/netlabel/netlabel_user.h
> @@ -41,6 +41,65 @@
> 
>  /* NetLabel NETLINK helper functions */
> 
> +extern struct security_operations *netlbl_active_lsm;
> +
> +/**
> + * netlbl_secid_to_secctx - call the registered secid_to_secctx LSM hook
> + * @secid - The secid to convert
> + * @secdata - Where to put the result
> + * @seclen - Where to put the length of the result
> + *
> + * Returns: the result of calling the hook.
> + */
> +static inline int netlbl_secid_to_secctx(u32 secid, char **secdata, u32
> *seclen) +{
> +	if (netlbl_active_lsm == NULL)
> +		return -EINVAL;
> +	return netlbl_active_lsm->secid_to_secctx(secid, secdata, seclen);
> +}
> +
> +/**
> + * netlbl_release_secctx - call the registered release_secctx LSM hook
> + * @secdata - The security context to release
> + * @seclen - The size of the context to release
> + *
> + */
> +static inline void netlbl_release_secctx(char *secdata, u32 seclen)
> +{
> +	if (netlbl_active_lsm != NULL)
> +		netlbl_active_lsm->release_secctx(secdata, seclen);
> +}
> +
> +/**
> + * netlbl_secctx_to_secid - call the registered seccts_to_secid LSM hook
> + * @secdata - The security context
> + * @seclen - The size of the security context
> + * @secid - Where to put the result
> + *
> + * Returns: the result of calling the hook
> + */
> +static inline int netlbl_secctx_to_secid(const char *secdata, u32 seclen,
> +					 u32 *secid)
> +{
> +	if (netlbl_active_lsm == NULL) {
> +		*secid = 0;
> +		return -EINVAL;
> +	}
> +	return netlbl_active_lsm->secctx_to_secid(secdata, seclen, secid);
> +}
> +
> +/**
> + * netlbl_task_getsecid - call the registered task_getsecid LSM hook
> + * @p - The task
> + * @secid - Where to put the secid
> + *
> + */
> +static inline void netlbl_task_getsecid(struct task_struct *p, u32 *secid)
> +{
> +	if (netlbl_active_lsm)
> +		netlbl_active_lsm->task_getsecid(p, secid);
> +}

Any particular reason you put all these functions in 'netlabel_user.h'?  I ask 
because this header is related to the NetLabel netlink interface, with some 
minor audit stuff tossed in for good measure; it really has nothing to do with 
the LSM secctx/secid stuff.  I'd probably prefer these functions end up in 
their own header file for the sake of better organization, maybe 
'netlabel_secid.h'?

-- 
paul moore
www.paul-moore.com

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists