| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CA+V-a8u_YA=TJaRebboigM6z-A=R6-ZdyxZSED7H+4w+LN+cTQ@mail.gmail.com>
Date: Mon, 29 Apr 2013 23:00:26 +0530
From: Prabhakar Lad <prabhakar.csengg@...il.com>
To: Laurent Pinchart <laurent.pinchart@...asonboard.com>
Cc: LMML <linux-media@...r.kernel.org>,
LKML <linux-kernel@...r.kernel.org>,
Mauro Carvalho Chehab <mchehab@...hat.com>,
Hans Verkuil <hans.verkuil@...co.com>,
Guennadi Liakhovetski <g.liakhovetski@....de>,
DLOS <davinci-linux-open-source@...ux.davincidsp.com>
Subject: Re: [PATCH] media: i2c: tvp7002: enable TVP7002 decoder for media
controller based usage
Hi Laurent,
Thanks for the review.
On Mon, Apr 29, 2013 at 7:57 PM, Laurent Pinchart
<laurent.pinchart@...asonboard.com> wrote:
> Hi Prabhakar,
>
> Thank you for the patch.
>
> On Friday 26 April 2013 13:35:35 Prabhakar Lad wrote:
>> From: Lad, Prabhakar <prabhakar.csengg@...il.com>
>>
>> This patch enables tvp7002 decoder driver for media controller
>> based usage by adding v4l2_subdev_pad_ops operations support
>> for enum_mbus_code, set_pad_format, get_pad_format and media_entity_init()
>> on probe and media_entity_cleanup() on remove.
>>
>> The device supports 1 output pad and no input pads.
>
> We should actually define input pads, connected to connector entities, but
> that's out of scope for this patch.
>
>> Signed-off-by: Lad, Prabhakar <prabhakar.csengg@...il.com>
>> ---
>> drivers/media/i2c/tvp7002.c | 125 ++++++++++++++++++++++++++++++++++++++--
>> include/media/tvp7002.h | 2 +
>> 2 files changed, 122 insertions(+), 5 deletions(-)
>>
>> diff --git a/drivers/media/i2c/tvp7002.c b/drivers/media/i2c/tvp7002.c
>> index 027809c..b212d41 100644
>> --- a/drivers/media/i2c/tvp7002.c
>> +++ b/drivers/media/i2c/tvp7002.c
>> @@ -424,6 +424,8 @@ struct tvp7002 {
>> int streaming;
>>
>> const struct tvp7002_timings_definition *current_timings;
>> + struct media_pad pad;
>> + struct v4l2_mbus_framefmt format;
>> };
>>
>> /*
>> @@ -880,6 +882,93 @@ static const struct v4l2_ctrl_ops tvp7002_ctrl_ops = {
>> .s_ctrl = tvp7002_s_ctrl,
>> };
>>
>> +/*
>> + * tvp7002_enum_mbus_code() - Enum supported digital video format on pad
>> + * @sd: pointer to standard V4L2 sub-device structure
>> + * @fh: file handle for the subdev
>> + * @code: pointer to subdev enum mbus code struct
>> + *
>> + * Enumerate supported digital video formats for pad.
>> + */
>> +static int
>> +tvp7002_enum_mbus_code(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh,
>> + struct v4l2_subdev_mbus_code_enum *code)
>> +{
>> + /* Check pad index is valid */
>> + if (code->pad != 0)
>> + return -EINVAL;
>
> That check is already performed in the subdev core, there's no need to
> duplicate it here.
>
OK
>> +
>> + /* Check requested format index is within range */
>> + if (code->index != 0)
>> + return -EINVAL;
>> +
>> + code->code = V4L2_MBUS_FMT_YUYV10_1X20;
>> +
>> + return 0;
>> +}
>> +
>> +/*
>> + * tvp7002_set_pad_format() - set video format on pad
>> + * @sd: pointer to standard V4L2 sub-device structure
>> + * @fh: file handle for the subdev
>> + * @fmt: pointer to subdev format struct
>> + *
>> + * set video format for pad.
>> +*/
>> +static int
>> +tvp7002_set_pad_format(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh,
>> + struct v4l2_subdev_format *fmt)
>> +{
>> + struct tvp7002 *tvp7002 = to_tvp7002(sd);
>> +
>> + /* Check pad index is valid */
>> + if (fmt->pad != 0)
>> + return -EINVAL;
>
> Redundant check as well.
>
OK
>> + if (fmt->format.field != tvp7002->current_timings->scanmode ||
>> + fmt->format.code != V4L2_MBUS_FMT_YUYV10_1X20 ||
>> + fmt->format.colorspace != tvp7002->current_timings->color_space ||
>> + fmt->format.width != tvp7002->current_timings->timings.bt.width ||
>> + fmt->format.height != tvp7002->current_timings->timings.bt.height)
>> + return -EINVAL;
>
> You shouldn't return an error, but fix the input parameters according to what
> the device supports. As the format is fixed for a giving set of timings, the
> .set_pad_format() handler should just perform the same operations as
> .get_pad_format(). You could even define tvp7002_get_pad_format() only and use
> it as a handler for both .get_pad_format() and .set_pad_format().
>
OK. So its the job back in the application end to see what format was set.
>> + tvp7002->format = fmt->format;
>> +
>> + return 0;
>> +}
>> +
>> +/*
>> + * tvp7002_get_pad_format() - get video format on pad
>> + * @sd: pointer to standard V4L2 sub-device structure
>> + * @fh: file handle for the subdev
>> + * @fmt: pointer to subdev format struct
>> + *
>> + * get video format for pad.
>> + */
>> +static int
>> +tvp7002_get_pad_format(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh,
>> + struct v4l2_subdev_format *fmt)
>> +{
>> + struct tvp7002 *tvp7002 = to_tvp7002(sd);
>> +
>> + /* Check pad index is valid */
>> + if (fmt->pad != 0)
>> + return -EINVAL;
>
> Redundant check.
>
Ok
>> + if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
>> + fmt->format = tvp7002->format;
>> + return 0;
>> + }
>> +
>> + fmt->format.code = V4L2_MBUS_FMT_YUYV10_1X20;
>> + fmt->format.width = tvp7002->current_timings->timings.bt.width;
>> + fmt->format.height = tvp7002->current_timings->timings.bt.height;
>> + fmt->format.field = tvp7002->current_timings->scanmode;
>> + fmt->format.colorspace = tvp7002->current_timings->color_space;
>> +
>> + return 0;
>> +}
>> +
>> /* V4L2 core operation handlers */
>> static const struct v4l2_subdev_core_ops tvp7002_core_ops = {
>> .g_chip_ident = tvp7002_g_chip_ident,
>> @@ -910,10 +999,18 @@ static const struct v4l2_subdev_video_ops
>> tvp7002_video_ops = { .enum_mbus_fmt = tvp7002_enum_mbus_fmt,
>> };
>>
>> +/* media pad related operation handlers */
>> +static const struct v4l2_subdev_pad_ops tvp7002_pad_ops = {
>> + .enum_mbus_code = tvp7002_enum_mbus_code,
>> + .get_fmt = tvp7002_get_pad_format,
>> + .set_fmt = tvp7002_set_pad_format,
>
> We will need to define pad-aware DV timings operations.
>
I didn't get you this?
Regards,
--Prabhakar Lad
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists