lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Date: Thu, 2 May 2013 07:43:29 +0000 From: "Gupta, Pekon" <pekon@...com> To: Huang Shijie <b32955@...escale.com>, "dwmw2@...radead.org" <dwmw2@...radead.org> CC: "computersforpeace@...il.com" <computersforpeace@...il.com>, "linux-mtd@...ts.infradead.org" <linux-mtd@...ts.infradead.org>, "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>, "dedekind1@...il.com" <dedekind1@...il.com> Subject: RE: [PATCH V4 4/9] mtd: get the ECC info from the Extended Parameter Page > Since the ONFI 2.1, the onfi spec adds the Extended Parameter Page > to store the ECC info. > > The onfi spec tells us that if the nand chip's recommended ECC codeword > size is not 512 bytes, then the @ecc_bits is 0xff. The host _SHOULD_ > then > read the Extended ECC information that is part of the extended > parameter > page to retrieve the ECC requirements for this device. > > This patch implement the reading of the Extended Parameter Page, and > parses > the sections for ECC type, and get the ECC info from the ECC section. > > Tested this patch with Micron MT29F64G08CBABAWP. > > Signed-off-by: Huang Shijie <b32955@...escale.com> Acked-by: Pekon Gupta <pekon@...com> Thanks.. with regards, pekon -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists