[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAErSpo75SETEe-OKhY2-NW3csaxt=f09JcheHx95bzkCcGO6yg@mail.gmail.com>
Date: Tue, 7 May 2013 15:02:57 -0700
From: Bjorn Helgaas <bhelgaas@...gle.com>
To: Patrik Jakobsson <patrik.r.jakobsson@...il.com>
Cc: Robert Hancock <hancockrwd@...il.com>,
"Artem S. Tashkinov" <t.artem@...os.com>,
Alan Stern <stern@...land.harvard.edu>,
Linus Torvalds <torvalds@...ux-foundation.org>,
linux-kernel <linux-kernel@...r.kernel.org>,
"linux-pci@...r.kernel.org" <linux-pci@...r.kernel.org>,
"Rafael J. Wysocki" <rjw@...k.pl>, Phillip Susi <psusi@...ntu.com>
Subject: Re: Abysmal HDD/USB write speed after sleep on a UEFI system
On Tue, May 7, 2013 at 2:48 PM, Patrik Jakobsson
<patrik.r.jakobsson@...il.com> wrote:
> On Tue, May 7, 2013 at 10:20 PM, Bjorn Helgaas <bhelgaas@...gle.com> wrote:
>>> I'm not sure if reading /proc/mtrr actually reads the registers out of
>>> the CPU each time, or whether we just return the cached values we read
>>> out during initial boot-up. If the latter, then this output isn't
>>> really useful as there's no guarantee the values are still intact.
>>
>> Good point. From what I can tell, on Artem's system with "CPU0:
>> Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz," we would be using
>> generic_mtrr_ops, and generic_get_mtrr() appears to read from the
>> MSRs, so I think it should be useful.
>
> FWIW, that motherboard suffers from a PCI to PCIE bridge problem. It might
> have been fixed by bios upgrades by now but not sure.
>
> It might also suffer (depending on the revision) from the Sandy bridge SATA
> issue. So if affected, SATA controller is a ticking bomb.
>
> I have a P8H67-V motherboard but I haven't seen any suspend related issues.
>
> If this is totally unrelated I'm sorry for wasting your time. Just thought it
> might be good to know.
Thanks for chiming in. I'm not familiar with either of the issues you
mentioned. Do you have any references where I could read up on them?
Artem's system has a PCIe-to-PCI bridge (not a PCI-to-PCIe bridge) at
05:00.0, but it leads to [bus 06] and there's nothing on bus 06, so I
don't think that's the problem.
And the issue affects both USB and a hard drive, so I suspect it's
more than just SATA. Artem, did you identify the PCI devices leading
to your USB and hard drive? I can't remember if I've actually seen
that.
Bjorn
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists