| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20130509222759.512061751@linuxfoundation.org>
Date: Thu, 9 May 2013 15:31:37 -0700
From: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To: linux-kernel@...r.kernel.org
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
stable@...r.kernel.org,
Tóth Attila <atoth@...th.sote.hu>,
Konstantin Khlebnikov <khlebnikov@...nvz.org>,
Bruce Allan <bruce.w.allan@...el.com>,
"Rafael J. Wysocki" <rafael.j.wysocki@...el.com>,
Borislav Petkov <bp@...e.de>,
Aaron Brown <aaron.f.brown@...el.com>,
Jeff Kirsher <jeffrey.t.kirsher@...el.com>
Subject: [ 14/73] e1000e: fix runtime power management transitions
3.8-stable review patch. If anyone has any objections, please let me know.
------------------
From: Konstantin Khlebnikov <khlebnikov@...nvz.org>
commit 66148babe728f3e00e13c56f6b0ecf325abd80da upstream.
This patch removes redundant actions from driver and fixes its interaction
with actions in pci-bus runtime power management code.
It removes pci_save_state() from __e1000_shutdown() for normal adapters,
PCI bus callbacks pci_pm_*() will do all this for us. Now __e1000_shutdown()
switches to D3-state only quad-port adapters, because they needs quirk for
clearing false-positive error from downsteam pci-e port.
pci_save_state() now called after clearing bus-master bit, thus __e1000_resume()
and e1000_io_slot_reset() must set it back after restoring configuration space.
This patch set get_link_status before calling pm_runtime_put() in e1000_open()
to allow e1000_idle() get real link status and schedule first runtime suspend.
This patch also enables wakeup for device if management mode is enabled
(like for WoL) as result pci_prepare_to_sleep() would setup wakeup without
special actions like custom 'enable_wakeup' sign.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@...nvz.org>
Cc: Bruce Allan <bruce.w.allan@...el.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@...el.com>
Tested-by: Borislav Petkov <bp@...e.de>
Tested-by: Aaron Brown <aaron.f.brown@...el.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
Tested-by: Tóth Attila <atoth@...th.sote.hu>
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
---
drivers/net/ethernet/intel/e1000e/netdev.c | 78 ++++++-----------------------
1 file changed, 18 insertions(+), 60 deletions(-)
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -3952,6 +3952,7 @@ static int e1000_open(struct net_device
netif_start_queue(netdev);
adapter->idle_check = true;
+ hw->mac.get_link_status = true;
pm_runtime_put(&pdev->dev);
/* fire a link status change interrupt to start the watchdog */
@@ -5450,8 +5451,7 @@ release:
return retval;
}
-static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake,
- bool runtime)
+static int __e1000_shutdown(struct pci_dev *pdev, bool runtime)
{
struct net_device *netdev = pci_get_drvdata(pdev);
struct e1000_adapter *adapter = netdev_priv(netdev);
@@ -5475,10 +5475,6 @@ static int __e1000_shutdown(struct pci_d
}
e1000e_reset_interrupt_capability(adapter);
- retval = pci_save_state(pdev);
- if (retval)
- return retval;
-
status = er32(STATUS);
if (status & E1000_STATUS_LU)
wufc &= ~E1000_WUFC_LNKC;
@@ -5534,13 +5530,6 @@ static int __e1000_shutdown(struct pci_d
ew32(WUFC, 0);
}
- *enable_wake = !!wufc;
-
- /* make sure adapter isn't asleep if manageability is enabled */
- if ((adapter->flags & FLAG_MNG_PT_ENABLED) ||
- (hw->mac.ops.check_mng_mode(hw)))
- *enable_wake = true;
-
if (adapter->hw.phy.type == e1000_phy_igp_3)
e1000e_igp3_phy_powerdown_workaround_ich8lan(&adapter->hw);
@@ -5551,26 +5540,6 @@ static int __e1000_shutdown(struct pci_d
pci_clear_master(pdev);
- return 0;
-}
-
-static void e1000_power_off(struct pci_dev *pdev, bool sleep, bool wake)
-{
- if (sleep && wake) {
- pci_prepare_to_sleep(pdev);
- return;
- }
-
- pci_wake_from_d3(pdev, wake);
- pci_set_power_state(pdev, PCI_D3hot);
-}
-
-static void e1000_complete_shutdown(struct pci_dev *pdev, bool sleep,
- bool wake)
-{
- struct net_device *netdev = pci_get_drvdata(pdev);
- struct e1000_adapter *adapter = netdev_priv(netdev);
-
/* The pci-e switch on some quad port adapters will report a
* correctable error when the MAC transitions from D0 to D3. To
* prevent this we need to mask off the correctable errors on the
@@ -5584,12 +5553,13 @@ static void e1000_complete_shutdown(stru
pcie_capability_write_word(us_dev, PCI_EXP_DEVCTL,
(devctl & ~PCI_EXP_DEVCTL_CERE));
- e1000_power_off(pdev, sleep, wake);
+ pci_save_state(pdev);
+ pci_prepare_to_sleep(pdev);
pcie_capability_write_word(us_dev, PCI_EXP_DEVCTL, devctl);
- } else {
- e1000_power_off(pdev, sleep, wake);
}
+
+ return 0;
}
#ifdef CONFIG_PCIEASPM
@@ -5640,9 +5610,7 @@ static int __e1000_resume(struct pci_dev
if (aspm_disable_flag)
e1000e_disable_aspm(pdev, aspm_disable_flag);
- pci_set_power_state(pdev, PCI_D0);
- pci_restore_state(pdev);
- pci_save_state(pdev);
+ pci_set_master(pdev);
e1000e_set_interrupt_capability(adapter);
if (netif_running(netdev)) {
@@ -5708,14 +5676,8 @@ static int __e1000_resume(struct pci_dev
static int e1000_suspend(struct device *dev)
{
struct pci_dev *pdev = to_pci_dev(dev);
- int retval;
- bool wake;
-
- retval = __e1000_shutdown(pdev, &wake, false);
- if (!retval)
- e1000_complete_shutdown(pdev, true, wake);
- return retval;
+ return __e1000_shutdown(pdev, false);
}
static int e1000_resume(struct device *dev)
@@ -5738,13 +5700,10 @@ static int e1000_runtime_suspend(struct
struct net_device *netdev = pci_get_drvdata(pdev);
struct e1000_adapter *adapter = netdev_priv(netdev);
- if (e1000e_pm_ready(adapter)) {
- bool wake;
-
- __e1000_shutdown(pdev, &wake, true);
- }
+ if (!e1000e_pm_ready(adapter))
+ return 0;
- return 0;
+ return __e1000_shutdown(pdev, true);
}
static int e1000_idle(struct device *dev)
@@ -5782,12 +5741,7 @@ static int e1000_runtime_resume(struct d
static void e1000_shutdown(struct pci_dev *pdev)
{
- bool wake = false;
-
- __e1000_shutdown(pdev, &wake, false);
-
- if (system_state == SYSTEM_POWER_OFF)
- e1000_complete_shutdown(pdev, false, wake);
+ __e1000_shutdown(pdev, false);
}
#ifdef CONFIG_NET_POLL_CONTROLLER
@@ -5908,9 +5862,9 @@ static pci_ers_result_t e1000_io_slot_re
"Cannot re-enable PCI device after reset.\n");
result = PCI_ERS_RESULT_DISCONNECT;
} else {
- pci_set_master(pdev);
pdev->state_saved = true;
pci_restore_state(pdev);
+ pci_set_master(pdev);
pci_enable_wake(pdev, PCI_D3hot, 0);
pci_enable_wake(pdev, PCI_D3cold, 0);
@@ -6341,7 +6295,11 @@ static int e1000_probe(struct pci_dev *p
/* initialize the wol settings based on the eeprom settings */
adapter->wol = adapter->eeprom_wol;
- device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
+
+ /* make sure adapter isn't asleep if manageability is enabled */
+ if (adapter->wol || (adapter->flags & FLAG_MNG_PT_ENABLED) ||
+ (hw->mac.ops.check_mng_mode(hw)))
+ device_wakeup_enable(&pdev->dev);
/* save off EEPROM version number */
e1000_read_nvm(&adapter->hw, 5, 1, &adapter->eeprom_vers);
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists