| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20130510092046.17be9bbb@redhat.com>
Date: Fri, 10 May 2013 09:20:46 -0400
From: Luiz Capitulino <lcapitulino@...hat.com>
To: Rafael Aquini <aquini@...hat.com>
Cc: linux-mm@...ck.org, linux-kernel@...r.kernel.org,
kvm@...r.kernel.org, riel@...hat.com, mst@...hat.com,
amit.shah@...hat.com, anton@...msg.org
Subject: Re: [RFC 2/2] virtio_balloon: auto-ballooning support
On Thu, 9 May 2013 18:15:19 -0300
Rafael Aquini <aquini@...hat.com> wrote:
> On Thu, May 09, 2013 at 10:53:49AM -0400, Luiz Capitulino wrote:
> > Automatic ballooning consists of dynamically adjusting the guest's
> > balloon according to memory pressure in the host and in the guest.
> >
> > This commit implements the guest side of automatic balloning, which
> > basically consists of registering a shrinker callback with the kernel,
> > which will try to deflate the guest's balloon by the amount of pages
> > being requested. The shrinker callback is only registered if the host
> > supports the VIRTIO_BALLOON_F_AUTO_BALLOON feature bit.
> >
> > Automatic inflate is performed by the host.
> >
> > Here are some numbers. The test-case is to run 35 VMs (1G of RAM each)
> > in parallel doing a kernel build. Host has 32GB of RAM and 16GB of swap.
> > SWAP IN and SWAP OUT correspond to the number of pages swapped in and
> > swapped out, respectively.
> >
> > Auto-ballooning disabled:
> >
> > RUN TIME(s) SWAP IN SWAP OUT
> >
> > 1 634 930980 1588522
> > 2 610 627422 1362174
> > 3 649 1079847 1616367
> > 4 543 953289 1635379
> > 5 642 913237 1514000
> >
> > Auto-ballooning enabled:
> >
> > RUN TIME(s) SWAP IN SWAP OUT
> >
> > 1 629 901 12537
> > 2 624 981 18506
> > 3 626 573 9085
> > 4 631 2250 42534
> > 5 627 1610 20808
> >
> > Signed-off-by: Luiz Capitulino <lcapitulino@...hat.com>
> > ---
>
> Nice work Luiz! Just allow me a silly question, though.
I have 100% more chances of committing sillynesses than you, so please
go ahead.
> Since your shrinker
> doesn't change the balloon target size,
Which target size are you referring to? The one in the host (member num_pages
of VirtIOBalloon in QEMU)?
If it the one in the host, then my understanding is that that member is only
used to communicate the new balloon target to the guest. The guest driver
will only read it when told (by the host) to do so, and when it does the
target value will be correct.
Am I right?
> as soon as the shrink round finishes the
> balloon will re-inflate again, won't it? Doesn't this cause a sort of "balloon
> thrashing" scenario, if both guest and host are suffering from memory pressure?
>
>
> The rest I have for the moment, are only nitpicks :)
>
>
> > drivers/virtio/virtio_balloon.c | 55 +++++++++++++++++++++++++++++++++++++
> > include/uapi/linux/virtio_balloon.h | 1 +
> > 2 files changed, 56 insertions(+)
> >
> > diff --git a/drivers/virtio/virtio_balloon.c b/drivers/virtio/virtio_balloon.c
> > index 9d5fe2b..f9dcae8 100644
> > --- a/drivers/virtio/virtio_balloon.c
> > +++ b/drivers/virtio/virtio_balloon.c
> > @@ -71,6 +71,9 @@ struct virtio_balloon
> > /* Memory statistics */
> > int need_stats_update;
> > struct virtio_balloon_stat stats[VIRTIO_BALLOON_S_NR];
> > +
> > + /* Memory shrinker */
> > + struct shrinker shrinker;
> > };
> >
> > static struct virtio_device_id id_table[] = {
> > @@ -126,6 +129,7 @@ static void set_page_pfns(u32 pfns[], struct page *page)
> > pfns[i] = page_to_balloon_pfn(page) + i;
> > }
> >
> > +/* This function should be called with vb->balloon_mutex held */
> > static void fill_balloon(struct virtio_balloon *vb, size_t num)
> > {
> > struct balloon_dev_info *vb_dev_info = vb->vb_dev_info;
> > @@ -166,6 +170,7 @@ static void release_pages_by_pfn(const u32 pfns[], unsigned int num)
> > }
> > }
> >
> > +/* This function should be called with vb->balloon_mutex held */
> > static void leak_balloon(struct virtio_balloon *vb, size_t num)
> > {
> > struct page *page;
> > @@ -285,6 +290,45 @@ static void update_balloon_size(struct virtio_balloon *vb)
> > &actual, sizeof(actual));
> > }
> >
> > +static unsigned long balloon_get_nr_pages(const struct virtio_balloon *vb)
> > +{
> > + return vb->num_pages / VIRTIO_BALLOON_PAGES_PER_PAGE;
> > +}
> > +
> > +static int balloon_shrinker(struct shrinker *shrinker,struct shrink_control *sc)
> > +{
> > + unsigned int nr_pages, new_target;
> > + struct virtio_balloon *vb;
> > +
> > + vb = container_of(shrinker, struct virtio_balloon, shrinker);
> > + if (!mutex_trylock(&vb->balloon_lock)) {
> > + return -1;
> > + }
> > +
> > + nr_pages = balloon_get_nr_pages(vb);
> > + if (!sc->nr_to_scan || !nr_pages) {
> > + goto out;
> > + }
> > +
> > + /*
> > + * If the current balloon size is greater than the number of
> > + * pages being reclaimed by the kernel, deflate only the needed
> > + * amount. Otherwise deflate everything we have.
> > + */
> > + new_target = 0;
> > + if (nr_pages > sc->nr_to_scan) {
> > + new_target = nr_pages - sc->nr_to_scan;
> > + }
> > +
>
> CodingStyle: you don't need the curly-braces for all these single staments above
Oh, this comes from QEMU coding style. Fixed.
> > + leak_balloon(vb, new_target);
> > + update_balloon_size(vb);
> > + nr_pages = balloon_get_nr_pages(vb);
> > +
> > +out:
> > + mutex_unlock(&vb->balloon_lock);
> > + return nr_pages;
> > +}
> > +
> > static int balloon(void *_vballoon)
> > {
> > struct virtio_balloon *vb = _vballoon;
> > @@ -471,6 +515,13 @@ static int virtballoon_probe(struct virtio_device *vdev)
> > goto out_del_vqs;
> > }
> >
> > + memset(&vb->shrinker, 0, sizeof(vb->shrinker));
> > + if (virtio_has_feature(vb->vdev, VIRTIO_BALLOON_F_AUTO_BALLOON)) {
> > + vb->shrinker.shrink = balloon_shrinker;
> > + vb->shrinker.seeks = DEFAULT_SEEKS;
> > + register_shrinker(&vb->shrinker);
> > + }
> > +
> > return 0;
> >
> > out_del_vqs:
> > @@ -487,6 +538,9 @@ out:
> >
> > static void remove_common(struct virtio_balloon *vb)
> > {
> > + if (vb->shrinker.shrink)
> > + unregister_shrinker(&vb->shrinker);
> > +
> > /* There might be pages left in the balloon: free them. */
> > mutex_lock(&vb->balloon_lock);
> > while (vb->num_pages)
> > @@ -543,6 +597,7 @@ static int virtballoon_restore(struct virtio_device *vdev)
> > static unsigned int features[] = {
> > VIRTIO_BALLOON_F_MUST_TELL_HOST,
> > VIRTIO_BALLOON_F_STATS_VQ,
> > + VIRTIO_BALLOON_F_AUTO_BALLOON,
> > };
> >
> > static struct virtio_driver virtio_balloon_driver = {
> > diff --git a/include/uapi/linux/virtio_balloon.h b/include/uapi/linux/virtio_balloon.h
> > index 5e26f61..bd378a4 100644
> > --- a/include/uapi/linux/virtio_balloon.h
> > +++ b/include/uapi/linux/virtio_balloon.h
> > @@ -31,6 +31,7 @@
> > /* The feature bitmap for virtio balloon */
> > #define VIRTIO_BALLOON_F_MUST_TELL_HOST 0 /* Tell before reclaiming pages */
> > #define VIRTIO_BALLOON_F_STATS_VQ 1 /* Memory Stats virtqueue */
> > +#define VIRTIO_BALLOON_F_AUTO_BALLOON 2 /* Automatic ballooning */
> >
> > /* Size of a PFN in the balloon interface. */
> > #define VIRTIO_BALLOON_PFN_SHIFT 12
> > --
> > 1.8.1.4
> >
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists