| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <518DE4FF.1000702@gmail.com>
Date: Sat, 11 May 2013 14:28:15 +0800
From: Libo Chen <chenlibo.3@...il.com>
To: ben-linux@...ff.org, kgene.kim@...sung.com, balbi@...com
CC: linux-arm-kernel@...ts.infradead.org,
linux-samsung-soc@...r.kernel.org, linux-usb@...r.kernel.org,
linux-kernel@...r.kernel.org, lizefan@...wei.com,
libo.chen@...wei.com, stern@...land.harvard.edu,
akpm@...ux-foundation.org
Subject: [PATCH] usb: gadget: s3c2410: fix clk resource leak and update
From: Libo Chen <libo.chen@...wei.com>
currently, when clk_get(NULL,"usb-device") fail, it does not
disable && put usb_bus_clock. It is incorrect.
this patch use new interface devm_xxx instead of xxx then
we no need to care about cleanup resource in err case that is boring
and reduce code size.
Signed-off-by: Libo Chen <libo.chen@...wei.com>
---
drivers/usb/gadget/s3c2410_udc.c | 85
++++++++++++----------------------------
1 file changed, 25 insertions(+), 60 deletions(-)
diff --git a/drivers/usb/gadget/s3c2410_udc.c
b/drivers/usb/gadget/s3c2410_udc.c
old mode 100644
new mode 100755
index d0e75e1..0c573a8
--- a/drivers/usb/gadget/s3c2410_udc.c
+++ b/drivers/usb/gadget/s3c2410_udc.c
@@ -1780,7 +1780,7 @@ static int s3c2410_udc_probe(struct
platform_device *pdev)
dev_dbg(dev, "%s()\n", __func__);
- usb_bus_clock = clk_get(NULL, "usb-bus-gadget");
+ usb_bus_clock = devm_clk_get(NULL, "usb-bus-gadget");
if (IS_ERR(usb_bus_clock)) {
dev_err(dev, "failed to get usb bus clock source\n");
return PTR_ERR(usb_bus_clock);
@@ -1788,8 +1788,9 @@ static int s3c2410_udc_probe(struct
platform_device *pdev)
clk_enable(usb_bus_clock);
- udc_clock = clk_get(NULL, "usb-device");
+ udc_clock = devm_clk_get(NULL, "usb-device");
if (IS_ERR(udc_clock)) {
+ clk_disable(usb_bus_clock);
dev_err(dev, "failed to get udc clock source\n");
return PTR_ERR(udc_clock);
}
@@ -1814,13 +1815,15 @@ static int s3c2410_udc_probe(struct
platform_device *pdev)
rsrc_start = S3C2410_PA_USBDEV;
rsrc_len = S3C24XX_SZ_USBDEV;
- if (!request_mem_region(rsrc_start, rsrc_len, gadget_name))
- return -EBUSY;
+ if (!devm_request_mem_region(rsrc_start, rsrc_len, gadget_name)) {
+ retval = -EBUSY;
+ goto out;
+ }
- base_addr = ioremap(rsrc_start, rsrc_len);
+ base_addr = devm_ioremap(rsrc_start, rsrc_len);
if (!base_addr) {
retval = -ENOMEM;
- goto err_mem;
+ goto out;
}
the_controller = udc;
@@ -1830,31 +1833,31 @@ static int s3c2410_udc_probe(struct
platform_device *pdev)
s3c2410_udc_reinit(udc);
/* irq setup after old hardware state is cleaned up */
- retval = request_irq(IRQ_USBD, s3c2410_udc_irq,
+ retval = devm_request_irq(IRQ_USBD, s3c2410_udc_irq,
0, gadget_name, udc);
if (retval != 0) {
dev_err(dev, "cannot get irq %i, err %d\n", IRQ_USBD, retval);
retval = -EBUSY;
- goto err_map;
+ goto out;
}
dev_dbg(dev, "got irq %i\n", IRQ_USBD);
if (udc_info && udc_info->vbus_pin > 0) {
- retval = gpio_request(udc_info->vbus_pin, "udc vbus");
+ retval = devm_gpio_request(udc_info->vbus_pin, "udc vbus");
if (retval < 0) {
dev_err(dev, "cannot claim vbus pin\n");
- goto err_int;
+ goto out;
}
irq = gpio_to_irq(udc_info->vbus_pin);
if (irq < 0) {
dev_err(dev, "no irq for gpio vbus pin\n");
- goto err_gpio_claim;
+ goto out;
}
- retval = request_irq(irq, s3c2410_udc_vbus_irq,
+ retval = devm_request_irq(irq, s3c2410_udc_vbus_irq,
IRQF_TRIGGER_RISING
| IRQF_TRIGGER_FALLING | IRQF_SHARED,
gadget_name, udc);
@@ -1863,7 +1866,7 @@ static int s3c2410_udc_probe(struct
platform_device *pdev)
dev_err(dev, "can't get vbus irq %d, err %d\n",
irq, retval);
retval = -EBUSY;
- goto err_gpio_claim;
+ goto out;
}
dev_dbg(dev, "got irq %i\n", irq);
@@ -1874,17 +1877,17 @@ static int s3c2410_udc_probe(struct
platform_device *pdev)
if (udc_info && !udc_info->udc_command &&
gpio_is_valid(udc_info->pullup_pin)) {
- retval = gpio_request_one(udc_info->pullup_pin,
+ retval = devm_gpio_request_one(udc_info->pullup_pin,
udc_info->vbus_pin_inverted ?
GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW,
"udc pullup");
if (retval)
- goto err_vbus_irq;
+ goto out;
}
retval = usb_add_gadget_udc(&pdev->dev, &udc->gadget);
if (retval)
- goto err_add_udc;
+ goto out;
if (s3c2410_udc_debugfs_root) {
udc->regs_info = debugfs_create_file("registers", S_IRUGO,
@@ -1898,22 +1901,9 @@ static int s3c2410_udc_probe(struct
platform_device *pdev)
return 0;
-err_add_udc:
- if (udc_info && !udc_info->udc_command &&
- gpio_is_valid(udc_info->pullup_pin))
- gpio_free(udc_info->pullup_pin);
-err_vbus_irq:
- if (udc_info && udc_info->vbus_pin > 0)
- free_irq(gpio_to_irq(udc_info->vbus_pin), udc);
-err_gpio_claim:
- if (udc_info && udc_info->vbus_pin > 0)
- gpio_free(udc_info->vbus_pin);
-err_int:
- free_irq(IRQ_USBD, udc);
-err_map:
- iounmap(base_addr);
-err_mem:
- release_mem_region(rsrc_start, rsrc_len);
+out:
+ clk_disable(udc_clock);
+ clk_disable(usb_bus_clock);
return retval;
}
@@ -1931,36 +1921,11 @@ static int s3c2410_udc_remove(struct
platform_device *pdev)
if (udc->driver)
return -EBUSY;
- usb_del_gadget_udc(&udc->gadget);
debugfs_remove(udc->regs_info);
+ usb_del_gadget_udc(&udc->gadget);
- if (udc_info && !udc_info->udc_command &&
- gpio_is_valid(udc_info->pullup_pin))
- gpio_free(udc_info->pullup_pin);
-
- if (udc_info && udc_info->vbus_pin > 0) {
- irq = gpio_to_irq(udc_info->vbus_pin);
- free_irq(irq, udc);
- }
-
- free_irq(IRQ_USBD, udc);
-
- iounmap(base_addr);
- release_mem_region(rsrc_start, rsrc_len);
-
- platform_set_drvdata(pdev, NULL);
-
- if (!IS_ERR(udc_clock) && udc_clock != NULL) {
- clk_disable(udc_clock);
- clk_put(udc_clock);
- udc_clock = NULL;
- }
-
- if (!IS_ERR(usb_bus_clock) && usb_bus_clock != NULL) {
- clk_disable(usb_bus_clock);
- clk_put(usb_bus_clock);
- usb_bus_clock = NULL;
- }
+ clk_disable(udc_clock);
+ clk_disable(usb_bus_clock);
dev_dbg(&pdev->dev, "%s: remove ok\n", __func__);
return 0;
--
1.8.1.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists