| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1368433260-16073-2-git-send-email-linux@prisktech.co.nz>
Date: Mon, 13 May 2013 20:20:59 +1200
From: Tony Prisk <linux@...sktech.co.nz>
To: Mike Turquette <mturquette@...aro.org>
Cc: vt8500-wm8505-linux-kernel@...glegroups.com,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
Tony Prisk <linux@...sktech.co.nz>
Subject: [PATCH 1/2] clk: vt8500: Add support for clocks on the WM8850 SoCs
The WM8850 has a different PLL clock to the previous versions. This
patch adds support for the WM8850-style PLL clocks.
Signed-off-by: Tony Prisk <linux@...sktech.co.nz>
---
Documentation/devicetree/bindings/clock/vt8500.txt | 2 +
drivers/clk/clk-vt8500.c | 71 ++++++++++++++++++++
2 files changed, 73 insertions(+)
diff --git a/Documentation/devicetree/bindings/clock/vt8500.txt b/Documentation/devicetree/bindings/clock/vt8500.txt
index a880c70..91d71cc 100644
--- a/Documentation/devicetree/bindings/clock/vt8500.txt
+++ b/Documentation/devicetree/bindings/clock/vt8500.txt
@@ -8,6 +8,8 @@ Required properties:
- compatible : shall be one of the following:
"via,vt8500-pll-clock" - for a VT8500/WM8505 PLL clock
"wm,wm8650-pll-clock" - for a WM8650 PLL clock
+ "wm,wm8750-pll-clock" - for a WM8750 PLL clock
+ "wm,wm8850-pll-clock" - for a WM8850 PLL clock
"via,vt8500-device-clock" - for a VT/WM device clock
Required properties for PLL clocks:
diff --git a/drivers/clk/clk-vt8500.c b/drivers/clk/clk-vt8500.c
index debf688..6d5b6e9 100644
--- a/drivers/clk/clk-vt8500.c
+++ b/drivers/clk/clk-vt8500.c
@@ -42,6 +42,7 @@ struct clk_device {
#define PLL_TYPE_VT8500 0
#define PLL_TYPE_WM8650 1
#define PLL_TYPE_WM8750 2
+#define PLL_TYPE_WM8850 3
struct clk_pll {
struct clk_hw hw;
@@ -327,6 +328,15 @@ CLK_OF_DECLARE(vt8500_device, "via,vt8500-device-clock", vtwm_device_clk_init);
#define WM8750_BITS_TO_VAL(f, m, d1, d2) \
((f << 24) | ((m - 1) << 16) | ((d1 - 1) << 8) | d2)
+/* Helper macros for PLL_WM8850 */
+#define WM8850_PLL_MUL(x) ((((x >> 16) & 0x7F) + 1) * 2)
+#define WM8850_PLL_DIV(x) ((((x >> 8) & 1) + 1) * (1 << (x & 3)))
+
+#define WM8850_BITS_TO_FREQ(r, m, d1, d2) \
+ (r * ((m + 1) * 2) / ((d1+1) * (1 << d2)))
+
+#define WM8850_BITS_TO_VAL(m, d1, d2) \
+ ((((m / 2) - 1) << 16) | ((d1 - 1) << 8) | d2)
static void vt8500_find_pll_bits(unsigned long rate, unsigned long parent_rate,
u32 *multiplier, u32 *prediv)
@@ -466,6 +476,49 @@ static void wm8750_find_pll_bits(unsigned long rate, unsigned long parent_rate,
*divisor2 = best_div2;
}
+static void wm8850_find_pll_bits(unsigned long rate, unsigned long parent_rate,
+ u32 *multiplier, u32 *divisor1, u32 *divisor2)
+{
+ u32 mul, div1, div2;
+ u32 best_mul, best_div1, best_div2;
+ unsigned long tclk, rate_err, best_err;
+
+ best_err = (unsigned long)-1;
+
+ /* Find the closest match (lower or equal to requested) */
+ for (div1 = 1; div1 >= 0; div1--)
+ for (div2 = 3; div2 >= 0; div2--)
+ for (mul = 0; mul <= 127; mul++) {
+ tclk = parent_rate * ((mul + 1) * 2) /
+ ((div1 + 1) * (1 << div2));
+ if (tclk > rate)
+ continue;
+ /* error will always be +ve */
+ rate_err = rate - tclk;
+ if (rate_err == 0) {
+ *multiplier = mul;
+ *divisor1 = div1;
+ *divisor2 = div2;
+ return;
+ }
+
+ if (rate_err < best_err) {
+ best_err = rate_err;
+ best_mul = mul;
+ best_div1 = div1;
+ best_div2 = div2;
+ }
+ }
+
+ /* if we got here, it wasn't an exact match */
+ pr_warn("%s: requested rate %lu, found rate %lu\n", __func__, rate,
+ rate - best_err);
+
+ *multiplier = best_mul;
+ *divisor1 = best_div1;
+ *divisor2 = best_div2;
+}
+
static int vtwm_pll_set_rate(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate)
{
@@ -489,6 +542,10 @@ static int vtwm_pll_set_rate(struct clk_hw *hw, unsigned long rate,
wm8750_find_pll_bits(rate, parent_rate, &filter, &mul, &div1, &div2);
pll_val = WM8750_BITS_TO_VAL(filter, mul, div1, div2);
break;
+ case PLL_TYPE_WM8850:
+ wm8850_find_pll_bits(rate, parent_rate, &mul, &div1, &div2);
+ pll_val = WM8850_BITS_TO_VAL(mul, div1, div2);
+ break;
default:
pr_err("%s: invalid pll type\n", __func__);
return 0;
@@ -525,6 +582,10 @@ static long vtwm_pll_round_rate(struct clk_hw *hw, unsigned long rate,
wm8750_find_pll_bits(rate, *prate, &filter, &mul, &div1, &div2);
round_rate = WM8750_BITS_TO_FREQ(*prate, mul, div1, div2);
break;
+ case PLL_TYPE_WM8850:
+ wm8850_find_pll_bits(rate, *prate, &mul, &div1, &div2);
+ round_rate = WM8850_BITS_TO_FREQ(*prate, mul, div1, div2);
+ break;
default:
round_rate = 0;
}
@@ -552,6 +613,10 @@ static unsigned long vtwm_pll_recalc_rate(struct clk_hw *hw,
pll_freq = parent_rate * WM8750_PLL_MUL(pll_val);
pll_freq /= WM8750_PLL_DIV(pll_val);
break;
+ case PLL_TYPE_WM8850:
+ pll_freq = parent_rate * WM8850_PLL_MUL(pll_val);
+ pll_freq /= WM8850_PLL_DIV(pll_val);
+ break;
default:
pll_freq = 0;
}
@@ -628,6 +693,12 @@ static void __init wm8750_pll_init(struct device_node *node)
}
CLK_OF_DECLARE(wm8750_pll, "wm,wm8750-pll-clock", wm8750_pll_init);
+static void __init wm8850_pll_init(struct device_node *node)
+{
+ vtwm_pll_clk_init(node, PLL_TYPE_WM8850);
+}
+CLK_OF_DECLARE(wm8850_pll, "wm,wm8850-pll-clock", wm8850_pll_init);
+
void __init vtwm_clk_init(void __iomem *base)
{
if (!base)
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists