| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1368442935-25926-1-git-send-email-abbotti@mev.co.uk>
Date: Mon, 13 May 2013 12:02:15 +0100
From: Ian Abbott <abbotti@....co.uk>
To: devel@...uxdriverproject.org
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Ian Abbott <abbotti@....co.uk>,
H Hartley Sweeten <hartleys@...ionengravers.com>,
Frank Mori Hess <fmhess@...rs.sourceforge.net>,
Peter Huewe <peterhuewe@....de>,
Geert Uytterhoeven <geert@...ux-m68k.org>,
<linux-kernel@...r.kernel.org>
Subject: [PATCH] staging: comedi: ni_labpc: fix VIRT_TO_BUS dependency
The "ni_labpc" module acts as a low-level comedi driver for various
Nattional Instruments Lab-PC ISA cards if `CONFIG_NI_LABPC_ISA` is
enabled, and also as a common module depended on by the "ni_labpc_cs"
and "ni_labpc_pci" modules. For ISA cards, it optionally supports the
use of an ISA DMA channel if `CONFIG_ISA_DMA_API` is enabled, using
conditionally compiled code. This conditionally compiled code also
relies on `virt_to_bus()`, which only exists if `CONFIG_VIRT_TO_BUS` is
enabled. Therefore, support for ISA DMA should only be compiled in if
both `CONFIG_ISA_DMA_API` and `CONFIG_VIRT_TO_BUS` are defined,
otherwise the "ni_labpc" module fails to compile on kernels that enable
`CONFIG_ISA_DMA_API` but not `CONFIG_VIRT_TO_BUS`.
Conditionally define a new macro `NI_LABPC_ISA_DMA` iff both
`CONFIG_ISA_DMA_API` and `CONFIG_VIRT_TO_BUS` are defined, and change
the conditional compilation tests to use the new macro instead of
`CONFIG_ISA_DMA_API`.
Also, in the "Kconfig", remove the `VIRT_TO_BUS` dependency from the
`COMEDI_NI_LABPC_ISA` option since the dependency is now checked at
compile time.
Signed-off-by: Ian Abbott <abbotti@....co.uk>
---
drivers/staging/comedi/Kconfig | 1 -
drivers/staging/comedi/drivers/ni_labpc.c | 18 +++++++++++-------
2 files changed, 11 insertions(+), 8 deletions(-)
diff --git a/drivers/staging/comedi/Kconfig b/drivers/staging/comedi/Kconfig
index 7871579..c55a79d 100644
--- a/drivers/staging/comedi/Kconfig
+++ b/drivers/staging/comedi/Kconfig
@@ -487,7 +487,6 @@ config COMEDI_NI_ATMIO16D
config COMEDI_NI_LABPC_ISA
tristate "NI Lab-PC and compatibles ISA support"
select COMEDI_NI_LABPC
- depends on VIRT_TO_BUS
---help---
Enable support for National Instruments Lab-PC and compatibles
Lab-PC-1200, Lab-PC-1200AI, Lab-PC+.
diff --git a/drivers/staging/comedi/drivers/ni_labpc.c b/drivers/staging/comedi/drivers/ni_labpc.c
index 3d978f3..5078be7 100644
--- a/drivers/staging/comedi/drivers/ni_labpc.c
+++ b/drivers/staging/comedi/drivers/ni_labpc.c
@@ -75,6 +75,10 @@
#include "comedi_fc.h"
#include "ni_labpc.h"
+#if defined(CONFIG_ISA_DMA_API) && defined(CONFIG_VIRT_TO_BUS)
+#define NI_LABPC_ISA_DMA
+#endif
+
/*
* Register map (all registers are 8-bit)
*/
@@ -465,7 +469,7 @@ static int labpc_ai_insn_read(struct comedi_device *dev,
return insn->n;
}
-#ifdef CONFIG_ISA_DMA_API
+#ifdef NI_LABPC_ISA_DMA
/* utility function that suggests a dma transfer size in bytes */
static unsigned int labpc_suggest_transfer_size(const struct comedi_cmd *cmd)
{
@@ -883,7 +887,7 @@ static int labpc_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
return ret;
}
-#ifdef CONFIG_ISA_DMA_API
+#ifdef NI_LABPC_ISA_DMA
/* figure out what method we will use to transfer data */
if (devpriv->dma_chan && /* need a dma channel allocated */
/*
@@ -966,7 +970,7 @@ static int labpc_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
labpc_clear_adc_fifo(dev);
-#ifdef CONFIG_ISA_DMA_API
+#ifdef NI_LABPC_ISA_DMA
/* set up dma transfer */
if (xfer == isa_dma_transfer) {
unsigned long irq_flags;
@@ -1041,7 +1045,7 @@ static int labpc_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
return 0;
}
-#ifdef CONFIG_ISA_DMA_API
+#ifdef NI_LABPC_ISA_DMA
static void labpc_drain_dma(struct comedi_device *dev)
{
struct labpc_private *devpriv = dev->private;
@@ -1145,7 +1149,7 @@ static int labpc_drain_fifo(struct comedi_device *dev)
* when acquisition is terminated by stop_src == TRIG_EXT). */
static void labpc_drain_dregs(struct comedi_device *dev)
{
-#ifdef CONFIG_ISA_DMA_API
+#ifdef NI_LABPC_ISA_DMA
struct labpc_private *devpriv = dev->private;
if (devpriv->current_transfer == isa_dma_transfer)
@@ -1195,7 +1199,7 @@ static irqreturn_t labpc_interrupt(int irq, void *d)
return IRQ_HANDLED;
}
-#ifdef CONFIG_ISA_DMA_API
+#ifdef NI_LABPC_ISA_DMA
if (devpriv->current_transfer == isa_dma_transfer) {
/*
* if a dma terminal count of external stop trigger
@@ -1731,7 +1735,7 @@ static int labpc_attach(struct comedi_device *dev, struct comedi_devconfig *it)
if (ret)
return ret;
-#ifdef CONFIG_ISA_DMA_API
+#ifdef NI_LABPC_ISA_DMA
if (dev->irq && (dma_chan == 1 || dma_chan == 3)) {
devpriv->dma_buffer = kmalloc(dma_buffer_size,
GFP_KERNEL | GFP_DMA);
--
1.8.1.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists